RESUMO
In 5G and beyond, the network slicing is a crucial feature that ensures the fulfillment of service requirements. Nevertheless, the impact of the number of slices and slice size on the radio access network (RAN) slice performance has not yet been studied. This research is needed to understand the effects of creating subslices on slice resources to serve slice users and how the performance of RAN slices is affected by the number and size of these subslices. A slice is divided into numbers of subslices of different sizes, and the slice performance is evaluated based on the slice bandwidth utilization and slice goodput. A proposed subslicing algorithm is compared with k-means UE clustering and equal UE grouping. The MATLAB simulation results show that subslicing can improve slice performance. If the slice contains all UEs with a good block error ratio (BLER), then a slice performance improvement of up to 37% can be achieved, and it comes more from the decrease in bandwidth utilization than the increase in goodput. If a slice contains UEs with a poor BLER, then the slice performance can be improved by up to 84%, and it comes only from the goodput increase. The most important criterion in subslicing is the minimum subslice size in terms of resource blocks (RB), which is 73 for a slice that contains all good-BLER UEs. If a slice contains UEs with poor BLER, then the subslice can be smaller.
RESUMO
Increased demand for fast edge computation and privacy concerns have shifted researchers' focus towards a type of distributed learning known as federated learning (FL). Recently, much research has been carried out on FL; however, a major challenge is the need to tackle the high diversity in different clients. Our research shows that using highly diverse data sets in FL can lead to low accuracy of some local models, which can be categorised as anomalous behaviour. In this paper, we present FedBranched, a clustering-based framework that uses probabilistic methods to create branches of clients and assigns their respective global models. Branching is performed using hidden Markov model clustering (HMM), and a round of branching depends on the diversity of the data. Clustering is performed on Euclidean distances of mean absolute percentage errors (MAPE) obtained from each client at the end of pre-defined communication rounds. The proposed framework was implemented on substation-level energy data with nine clients for short-term load forecasting using an artificial neural network (ANN). FedBranched took two clustering rounds and resulted in two different branches having individual global models. The results show a substantial increase in the average MAPE of all clients; the biggest improvement of 11.36% was observed in one client.
RESUMO
Performing 5G coverage planning across borders introduces real-life challenges related to legalities, intercountry agreements, and binding documents. This work provides RF network modelling exercise results to provide uninterrupted 5G coverage to the Via Baltica and Rail Baltica transport corridors crossing Estonia and Latvia and on the border with Lithuania, as well as the Tallinn-Tartu-Valga and Valka-Valga roads (Latvia-Estonia), capable of cross-border 5G services. The study starts by identifying and interviewing stakeholders from different sectors of operation in the Baltic states and Europe and then provides an overview of some of the main legal acts and documents regulating the electronic communications sector in the Baltic states and Europe. Furthermore, 5G network requirements are proposed. In addition, the necessary and existing passive and active infrastructure is described, including spectrum management-related analysis, where the RF bands 700 MHz and 3500 MHz are analysed. Finally, coverage planning is performed. The network modelling results aim to foresee the number of new sites that need to be built on the said transport corridors, also examining the existing infrastructure for such purposes. Additionally, an estimated timeline for building the new sites is provided.
RESUMO
Narrow-Band-Internet of Things (NB-IoT) is a promising wireless communication technology for harsh signal propagation conditions, including underground connectivity. The purpose of this study is to evaluate the real-life signal quality of an NB-IoT cellular sensor network for the monitoring and control of urban drainage systems. The implementation of the control systems toward smart infrastructures increase the need for low-cost and low-energy-consumption underground sensing devices. A measurement campaign was conducted in Rakvere, Estonia, to analyze the NB-IoT network's coverage and underground signal quality. The results were used to analyze the flood risk reduction potential in the pilot catchment, considering the quality of NB-IoT cellular network coverage. The signal measurements showed that in the case of plastic manholes, the best cellular transmitter placement is 0.5 m below the manhole cover, and at the ground level NB-RSRP reference signal strength of -104 dBm or better must be ensured to have a link budget with optimal energy consumption for communication. The results of flood risk reduction showed that excluding control locations with insufficient signal strength increased the number of major flooding nodes by 3.9% and mean flooding duration by 4.2% which is a relatively small change and characterizes the flexibility of the developed control system.
RESUMO
Machine Learning (ML) techniques can play a pivotal role in energy efficient IoT networks by reducing the unnecessary data from transmission. With such an aim, this work combines a low-power, yet computationally capable processing unit, with an NB-IoT radio into a smart gateway that can run ML algorithms to smart transmit visual data over the NB-IoT network. The proposed smart gateway utilizes supervised and unsupervised ML algorithms to optimize the visual data in terms of their size and quality before being transmitted over the air. This relaxes the channel occupancy from an individual NB-IoT radio, reduces its energy consumption and also minimizes the transmission time of data. Our on-field results indicate up to 93% reductions in the number of NB-IoT radio transmissions, up to 90.5% reductions in the NB-IoT radio energy consumption and up to 90% reductions in the data transmission time.
RESUMO
In Public Safety Networks (PSNs), the conservation of on-scene device energy is critical to ensure long term connectivity to first responders. Due to the limited transmit power, this connectivity can be ensured by enabling continuous cooperation among on-scene devices through multipath routing. In this paper, we present a Reinforcement Learning (RL) and Unmanned Aerial Vehicle- (UAV) aided multipath routing scheme for PSNs. The aim is to increase network lifetime by improving the Energy Efficiency (EE) of the PSN. First, network configurations are generated by using different clustering schemes. The RL is then applied to configure the routing topology that considers both the immediate energy cost and the total distance cost of the transmission path. The performance of these schemes are analyzed in terms of throughput, energy consumption, number of dead nodes, delay, packet delivery ratio, number of cluster head changes, number of control packets, and EE. The results showed an improvement of approximately 42% in EE of the clustering scheme when compared with non-clustering schemes. Furthermore, the impact of UAV trajectory and the number of UAVs are jointly analyzed by considering various trajectory scenarios around the disaster area. The EE can be further improved by 27% using Two UAVs on Opposite Axis of the building and moving in the Opposite directions (TUOAO) when compared to a single UAV scheme. The result showed that although the number of control packets in both the single and two UAV scenarios are comparable, the total number of CH changes are significantly different.
Assuntos
Redes de Comunicação de Computadores , Desastres , Algoritmos , Análise por ConglomeradosRESUMO
In scenarios, like critical public safety communication networks, On-Scene Available (OSA) user equipment (UE) may be only partially connected with the network infrastructure, e.g., due to physical damages or on-purpose deactivation by the authorities. In this work, we consider multi-hop Device-to-Device (D2D) communication in a hybrid infrastructure where OSA UEs connect to each other in a seamless manner in order to disseminate critical information to a deployed command center. The challenge that we address is to simultaneously keep the OSA UEs alive as long as possible and send the critical information to a final destination (e.g., a command center) as rapidly as possible, while considering the heterogeneous characteristics of the OSA UEs. We propose a dynamic adaptation approach based on machine learning to improve a joint energy-spectral efficiency (ESE). We apply a Q-learning scheme in a hybrid fashion (partially distributed and centralized) in learner agents (distributed OSA UEs) and scheduler agents (remote radio heads or RRHs), for which the next hop selection and RRH selection algorithms are proposed. Our simulation results show that the proposed dynamic adaptation approach outperforms the baseline system by approximately 67% in terms of joint energy-spectral efficiency, wherein the energy efficiency of the OSA UEs benefit from a gain of approximately 30%. Finally, the results show also that our proposed framework with C-RAN reduces latency by approximately 50% w.r.t. the baseline.
RESUMO
Current medical facilities usually lead to a very high cost especially for developing countries, rural areas and mass casualty incidents. Therefore, advanced electronic health systems are gaining momentum. In this paper, we first compared our novel off the shelf experimental wired Body Sensor Networks (BSN), that is, Digital First Aid (DigiAID) with the existing commercial product called as Hexoskin. We showed the viability of DigiAID through extensive real measurements during daily activities by both male and females. It was found that the major hurdle was wires to be worn by the subjects. Accordingly, we proposed and characterized the wireless DigiAID platform for wireless BSN (WBSN). Understanding the effect of body movements on wireless data transmission in WBSN is also of major importance. Therefore, this paper comprehensively evaluates and analyzes the impact of body movements, (a) to ensure transmission of data at different radio power levels and (b) its impact on the topology of the WBSN. Based on this we have proposed a dynamic power control algorithm that adapts the transmitting power according to the packet reception in an energy efficient manner. The results show that we have achieved substantial power savings at various nodes attached to the human body.
Assuntos
Técnicas Biossensoriais , Corpo Humano , Monitorização Fisiológica , Algoritmos , Redes de Comunicação de Computadores , Feminino , Humanos , Masculino , Dispositivos Eletrônicos Vestíveis , Tecnologia sem FioRESUMO
Narrowband internet of things (NB-IoT) is a recent cellular radio access technology based on Long-Term Evolution (LTE) introduced by Third-Generation Partnership Project (3GPP) for Low-Power Wide-Area Networks (LPWAN). The main aim of NB-IoT is to support massive machine-type communication (mMTC) and enable low-power, low-cost, and low-data-rate communication. NB-IoT is based on LTE design with some changes to meet the mMTC requirements. For example, in the physical (PHY) layer only single-antenna and low-order modulations are supported, and in the Medium Access Control (MAC) layers only one physical resource block is allocated for resource scheduling. The aim of this survey is to provide a comprehensive overview of the design changes brought in the NB-IoT standardization along with the detailed research developments from the perspectives of Physical and MAC layers.
RESUMO
In recent years, Energy Efficiency (EE) has become a critical design metric for cellular systems. In order to achieve EE, a fine balance between throughput and fairness must also be ensured. To this end, in this paper we have presented various resource block (RB) allocation schemes in relay-assisted Long Term Evolution-Advanced (LTE-A) networks. Driven by equal power and Bisection-based Power Allocation (BOPA) algorithm, the Maximum Throughput (MT) and an alternating MT and proportional fairness (PF)-based SAMM (abbreviated with Authors' names) RB allocation scheme is presented for a single relay. In the case of multiple relays, the dependency of RB and power allocation on relay deployment and users' association is first addressed through a k-mean clustering approach. Secondly, to reduce the computational cost of RB and power allocation, a two-step neural network (NN) process (SAMM NN) is presented that uses SAMM-based unsupervised learning for RB allocation and BOPA-based supervised learning for power allocation. The results for all the schemes are compared in terms of EE and user throughput. For a single relay, SAMM BOPA offers the best EE, whereas SAMM equal power provides the best fairness. In the case of multiple relays, the results indicate SAMM NN achieves better EE compared to SAMM equal power and BOPA, and it also achieves better throughput fairness compared to MT equal power and MT BOPA.
RESUMO
The fabrication of lightweight, ultra-thin, low power and intelligent body-borne sensors leads to novel advances in wireless body area networks (WBANs). Depending on the placement of the nodes, it is characterized as in/on body WBAN; thus, the channel is largely affected by body posture, clothing, muscle movement, body temperature and climatic conditions. The energy resources are limited and it is not feasible to replace the sensor's battery frequently. In order to keep the sensor in working condition, the channel resources should be reserved. The lifetime of the sensor is very crucial and it highly depends on transmission among sensor nodes and energy consumption. The reliability and energy efficiency in WBAN applications play a vital role. In this paper, the analytical expressions for energy efficiency (EE) and packet error rate (PER) are formulated for two-way relay cooperative communication. The results depict better reliability and efficiency compared to direct and one-way relay communication. The effective performance range of direct vs. cooperative communication is separated by a threshold distance. Based on EE calculations, an optimal packet size is observed that provides maximum efficiency over a certain link length. A smart and energy efficient system is articulated that utilizes all three communication modes, namely direct, one-way relay and two-way relay, as the direct link performs better for a certain range, but the cooperative communication gives better results for increased distance in terms of EE. The efficacy of the proposed hybrid scheme is also demonstrated over a practical quasi-static channel. Furthermore, link length extension and diversity is achieved by joint network-channel (JNC) coding the cooperative link.
Assuntos
Tecnologia sem Fio , Redes de Comunicação de Computadores , Fontes de Energia Elétrica , Corpo Humano , Reprodutibilidade dos TestesRESUMO
In this paper, we present an accurate and realistic simulation for body area networks (BAN) and body-to-body networks (BBN) using deterministic and semi-deterministic approaches. First, in the semi-deterministic approach, a real-time measurement campaign is performed, which is further characterized through statistical analysis. It is able to generate link-correlated and time-varying realistic traces (i.e., with consistent mobility patterns) for on-body and body-to-body shadowing and fading, including body orientations and rotations, by means of stochastic channel models. The full deterministic approach is particularly targeted to enhance IEEE 802.15.6 proposed channel models by introducing space and time variations (i.e., dynamic distances) through biomechanical modeling. In addition, it helps to accurately model the radio link by identifying the link types and corresponding path loss factors for line of sight (LOS) and non-line of sight (NLOS). This approach is particularly important for links that vary over time due to mobility. It is also important to add that the communication and protocol stack, including the physical (PHY), medium access control (MAC) and networking models, is developed for BAN and BBN, and the IEEE 802.15.6 compliance standard is provided as a benchmark for future research works of the community. Finally, the two approaches are compared in terms of the successful packet delivery ratio, packet delay and energy efficiency. The results show that the semi-deterministic approach is the best option; however, for the diversity of the mobility patterns and scenarios applicable, biomechanical modeling and the deterministic approach are better choices.
Assuntos
Corpo Humano , Telemetria/métodos , Tecnologia sem Fio , Algoritmos , Fenômenos Biomecânicos , Redes de Comunicação de Computadores , Humanos , Modelos Teóricos , Monitorização Ambulatorial/métodosRESUMO
Wireless body area networks (WBAN) has penetrated immensely in revolutionizing the classical heath-care system. Recently, number of WBAN applications has emerged which introduce potential limits to existing solutions. In particular, IEEE 802.15.6 standard has provided great flexibility, provisions and capabilities to deal emerging applications. In this paper, we investigate the application-specific throughput analysis by fine-tuning the physical (PHY) and medium access control (MAC) parameters of the IEEE 802.15.6 standard. Based on PHY characterizations in narrow band, at the MAC layer, carrier sense multiple access collision avoidance (CSMA/CA) and scheduled access protocols are extensively analyzed. It is concluded that, IEEE 802.15.6 standard can satisfy most of the WBANs applications throughput requirements by maximum achieving 680 Kbps. However, those emerging applications which require high quality audio or video transmissions, standard is not able to meet their constraints. Moreover, delay, energy efficiency and successful packet reception are considered as key performance metrics for comparing the MAC protocols. CSMA/CA protocol provides the best results to meet the delay constraints of medical and non-medical WBAN applications. Whereas, the scheduled access approach, performs very well both in energy efficiency and packet reception ratio.
Assuntos
Monitorização Ambulatorial/instrumentação , Telemedicina/instrumentação , Tecnologia sem Fio/instrumentação , HumanosRESUMO
In this survey a new application paradigm life and safety for critical operations and missions using wearable Wireless Body Area Networks (WBANs) technology is introduced. This paradigm has a vast scope of applications, including disaster management, worker safety in harsh environments such as roadside and building workers, mobile health monitoring, ambient assisted living and many more. It is often the case that during the critical operations and the target conditions, the existing infrastructure is either absent, damaged or overcrowded. In this context, it is envisioned that WBANs will enable the quick deployment of ad-hoc/on-the-fly communication networks to help save many lives and ensuring people's safety. However, to understand the applications more deeply and their specific characteristics and requirements, this survey presents a comprehensive study on the applications scenarios, their context and specific requirements. It explores details of the key enabling standards, existing state-of-the-art research studies, and projects to understand their limitations before realizing aforementioned applications. Application-specific challenges and issues are discussed comprehensively from various perspectives and future research and development directions are highlighted as an inspiration for new innovative solutions. To conclude, this survey opens up a good opportunity for companies and research centers to investigate old but still new problems, in the realm of wearable technologies, which are increasingly evolving and getting more and more attention recently.