RESUMO
We demonstrate a thulium-doped fiber laser that is mode-locked thanks to nonlinear polarization rotation (NPR) in a chalcogenide tapered fiber. The high nonlinearity of the tapered fiber leads to a combined reduction in mode-locking threshold power and cavity length compared to any all-silica NPR based mode-locked lasers. In the continuous wave mode-locking regime, the laser generates stable, tunable solitons pulses. In the Q-switched mode-locked regime, it allows single and multiwavelength pulses, tunable central wavelength and tunable multiwavelength separation.
RESUMO
Nonreciprocity is a fundamental requirement of signal isolation in optical communication systems. However, on chip isolator designs require either post-processing steps or external magnetic biasing, which are impractical for commercial applications. This raises the need for standalone devices which support nonreciprocal functionality using standardized fabrication techniques. Here, we report the first design of an electromagnetic coil surrounding a waveguide which exclusively employed the complementary metal-oxide-semiconductor (CMOS) process flow. The coil supported an electric current up to 14â mA. In simulations, it generated an alternating magnetic flux density up to 1.16 mT inside a strip waveguide and thereby induced a rotation of 50.71 picodegrees for the fundamental transverse-magnetic mode at a wavelength of 1352â nm. Our analysis further revealed methods to increase the rotation by orders of magnitude. It demonstrated the scope of manufacturing processes and serves as a building block for the development of a commercially viable, on-chip optical isolator.
RESUMO
Fiber optical parametric oscillators (FOPOs) are compact optical sources of coherent and broadly tunable light compatible with operation in unconventional spectral bands. Highly nonlinear silica fibers have enabled the development of FOPOs in the telecommunication wavelength band, but the strong material absorption of silica glass at wavelengths >2â µm limits its applicability in the mid-infrared (MIR) spectral range. In this work, we overcome this issue and report a FOPO designed entirely out of soft glass fiber. For this purpose, we combine an As2Se3 single-mode fiber coupler, an As2Se3 parametric gain medium, and a low-loss ZBLAN delay fiber to build the first all-fiber laser cavity made of soft glass. Two proof-of-concept FOPOs are presented, one driven by pure parametric gain leading to wavelength-tunable Stokes emission within the range 2.088-2.139â µm, and the other driven by Raman-assisted parametric gain leading to Stokes emission within the range 2.023-2.048â µm. This demonstration is a promising first step toward the development of fully fiberized MIR light sources.
RESUMO
Emerging applications in the mid-infrared (MIR) stimulate the growth and development of novel optical light sources. Soliton self-frequency shift (SSFS) in soft glass fiber currently shows great potential as an efficient approach toward the generation of broadly tunable femtosecond pulses in the MIR. In this work, we demonstrate a highly efficient tunable soliton source based on SSFS in chalcogenide glass. We show a simple and fully fiberized system to generate these continuously tunable Raman solitons over a broad spectral range of 2.047-2.667 µm, which consumes no more than 87 pJ per pulse. The spectral measurements suggest that the generated pulses are as short as 62 fs with a maximum power conversion efficiency of 43%. This result is realized thanks to an 8 cm long As2S3 microstructure optical fiber tapered into a microwire. Thanks to their broad transparency, their high nonlinearity, and their adjustable chromatic dispersion, chalcogenide microwires are promising components for the development of compact and highly efficient MIR optical sources with low power consumption.
RESUMO
We demonstrate an all-fiber wavelength conversion system from the C-band to the wavelength range of 2.30-2.64 µm of the mid-infrared (MIR). A series of nonlinear processes is used to perform this spectral shift in excess of 80 THz; from optical pulses in the C-band, self-phase modulation spectral broadening and offset filtering generate probe pulses in the C- and L-band. In parallel to this, Raman-induced soliton self-frequency shift converts pulses from the C-band into pump pulses in the 2 µm wavelength band. The resulting synchronized probe and pump pulses interact via degenerate four-wave mixing to produce wavelength-converted idler pulses in the MIR. Silica fiber is used for nonlinear processes at wavelengths $ {\lt} 2\;{\unicode{x00B5}{\rm m}}$<2µm whereas chalcogenide glass is used for nonlinear processes at wavelengths $ {\ge} 2\;{\unicode{x00B5}{\rm m}}$≥2µm. This system is a major step toward the development of compact MIR optical sources generated from widespread pump lasers of the C-band.
RESUMO
We demonstrate an in situ approach for the fabrication of all-fiber wavelength converters with a wavelength offset that is both far-detuned and precisely engineered. Such wavelength converters are fabricated using the parametric gain of A2Se3 microwires and finely tuned from successive adjustments of microwire diameter along with real-time monitoring. Wavelength conversion is achieved from a pump at a wavelength of 1.938 µm to any far-detuned idler within the spectral range of 2.347-2.481 µm, resulting in a detuning of 27.0-33.9 THz with a wavelength offset precision within 3.1 THz.
RESUMO
We report, to the best of our knowledge, the first all-fiber frequency-resolved optical gating device from nonlinear processing in chalcogenide glass. The strong four-wave mixing efficiency of an 11 cm long chalcogenide microwire enables a high sensitivity characterization of pulses in the 2 µm wavelength band. The amplitude and phase of chirped and unchirped picosecond pulses are accurately characterized with a high sensitivity of 0.16 mW2.
RESUMO
We report, to the best of our knowledge, the first all-fiber frequency-resolved optical gating (FROG) device based on cross-phase modulation in chalcogenide glass. The amplitude and phase of pulses as short as 390 fs at femtojoule energy levels are accurately characterized without direction-of-time ambiguity in the retrieved pulse. A measurement sensitivity of 18 mW2 is achieved from the strong nonlinearity of a 10 cm long chalcogenide microwire.
RESUMO
Single-walled carbon nanotubes as emerging quantum-light sources may fill a technological gap in silicon photonics due to their potential use as near-infrared, electrically driven, classical or nonclassical emitters. Unlike in photoluminescence, where nanotubes are excited with light, electrical excitation of single tubes is challenging and heavily influenced by device fabrication, architecture, and biasing conditions. Here we present electroluminescence spectroscopy data of ultra-short-channel devices made from (9,8) carbon nanotubes emitting in the telecom band. Emissions are stable under current biasing, and no enhanced suppression is observed down to 10 nm gap size. Low-temperature electroluminescence spectroscopy data also reported exhibit cold emission and line widths down to 2 meV at 4 K. Electroluminescence excitation maps give evidence that carrier recombination is the mechanism for light generation in short channels. Excitonic and trionic emissions can be switched on and off by gate voltage, and corresponding emission efficiency maps were compiled. Insights are gained into the influence of acoustic phonons on the line width, absence of intensity saturation and exciton-exciton annihilation, environmental effects such as dielectric screening and strain on the emission wavelength, and conditions to suppress hysteresis and establish optimum operation conditions.