RESUMO
The recycling and recovery of value-added secondary raw materials such as spent Zn/C batteries is crucial to reduce the environmental impact of wastes and to achieve cost-effective and sustainable processing technologies. The aim of this work is to fabricate reduced graphene oxide (rGO)-based sorbents with a desulfurization capability using recycled graphite from spent Zn/C batteries as raw material. Recycled graphite was obtained from a black mass recovered from the dismantling of spent batteries by a hydrometallurgical process. Graphene oxide (GO) obtained by the Tour's method was comparable to that obtained from pure graphite. rGO-based sorbents were prepared by doping obtained GO with NiO and ZnO precursors by a hydrothermal route with a final annealing step. Recycled graphite along with the obtained GO, intermediate (rGO-NiO-ZnO) and final composites (rGO-NiO-ZnO-400) were characterized by Wavelength Dispersive X-ray Fluorescence (WDXRF) and X-ray diffraction (XRD) that corroborated the removal of metal impurities from the starting material as well as the presence of NiO- and ZnO-doped reduced graphene oxide. The performance of the prepared composites was evaluated by sulfidation tests under different conditions. The results revealed that the proposed rGO-NiO-ZnO composite present a desulfurization capability similar to that of commercial sorbents which constitutes a competitive alternative to syngas cleaning.
RESUMO
The recombinant lipase from Ophiostoma piceae OPEr has demonstrated to have catalytic properties superior to those of many commercial enzymes. Enzymatic crudes with OPEr were immobilized onto magnetite nanoparticles by hydrophobicity (SiMAG-Octyl) and by two procedures that involve covalent attachment of the protein (mCLEAs and AMNP-GA), giving three nanobiocatalysts with different specific activity in hydrolysis of p-nitrophenyl butyrate (pNPB) and good storage stability at 4 °C over a period of 4 months. Free OPEr and the different nanobiocatalysts were compared for the synthesis of butyl esters of volatile fatty acids C4 to C7 in reactions containing the same lipase activity. The esterification yields and the reaction rates obtained with AMNP-GA-OPEr were in general higher or similar to those observed for the free enzyme, the mCLEAs-OPEr, and the non-covalent preparation SiMAG-Octyl-OPEr. The time course of the esterification of the acids C4 to C6 catalyzed by AMNP-GA-OPEr was comparable. The synthesis of the C7 ester was slower but very efficient, admitting concentrations of heptanoic acid up to 1 M. The best 1-butanol: acid molar ratio was 2:1 for all the acids tested. Depending on the substrate, this covalent preparation of OPEr maintained 80-96% activity over 7 cycles, revealing its excellent properties, easy recovery and recycling, and its potential to catalyze the green synthesis of chemicals of industrial interest.
Assuntos
Enzimas Imobilizadas , Lipase/química , Ophiostoma/química , Biocatálise , Ativação Enzimática , Estabilidade Enzimática , Esterificação , Ésteres , Ácidos Graxos/química , Hidrólise , Nanopartículas/química , Nanopartículas/ultraestrutura , Reciclagem , Análise EspectralRESUMO
Impaired intestinal permeability has recently been suggested as a possible source of chronic inflammation in schizophrenia, but its association with specific psychopathological features remains uncertain. This study aimed to explore the interaction between intestinal permeability, inflammation, and positive and negative symptoms in schizophrenia using a network analysis approach. The study sample comprised 281 adults with schizophrenia (age 40.29 ± 13.65 years, 63.0 % males), enrolled in a cross-sectional observational study assessing intestinal permeability. We estimated the network with a Gaussian graphical model, incorporating scores from 14 individual items of the Positive and Negative Syndrome Scale (PANSS), along with body mass index (BMI), and plasma C-reactive protein (CRP) and lipopolysaccharide-binding protein (LBP) levels. We calculated strength centrality and expected influence and used bridge centrality statistics to identify the bridge nodes. Distinct but highly interconnected clusters emerged for positive and negative symptoms. The biological variables were closely associated with each other. LBP was positively linked with CRP and BMI, but only indirectly connected to psychopathology. CRP exhibited direct positive relationships with various PANSS items and bridged LBP and BMI with psychopathology. Bridge nodes included Conceptual Disorganisation (P2), Active Social Avoidance (G16), Suspiciousness/Persecution (P6), and CRP. These findings support the role of gut-derived inflammation as a mechanism underlying greater symptom severity in schizophrenia and emphasise the importance of addressing dietary habits not only to enhance physical health but also to contribute to improving psychotic symptoms.
Assuntos
Esquizofrenia , Masculino , Adulto , Humanos , Pessoa de Meia-Idade , Feminino , Esquizofrenia/diagnóstico , Estudos Transversais , Função da Barreira Intestinal , Encéfalo , InflamaçãoRESUMO
Spent batteries recycling is an important way to obtain low-cost graphite. Nevertheless, the obtaining of crystalline graphite with a rather low density of defects is required for many applications. In the present work, high-quality graphites have been obtained from different kinds of spent batteries. Black masses from spent alkaline batteries (batteries black masses, BBM), and lithium-ion batteries from smartphones (smartphone black masses, SBM) and electric and/or hybrid vehicles (lithium-ion black masses, LBM) were used as starting materials. A hydrometallurgical process was then used to obtain recycled graphites by acidic leaching. Different leaching conditions were used depending on the type of the initial black mass. The final solids were characterized by a wide set of complementary techniques. The performance as Li ion batteries anode of the sample with better structural quality was assessed.
RESUMO
The incidence of autoimmune bullous disorders has increased over the years, especially in elderly patients with multiple comorbidities, which has stimulated research into their association with other diseases. We performed a retrospective observational study used the Minimum Basic Data Set of hospital discharges to review records of patients admitted to Spanish public hospitals between 2016 and 2019 with a diagnosis of any autoimmune bullous disorder. The objectives were to describe the comorbidity profile and the clinical-epidemiological characteristics of patients with pemphigus and pemphigoid, and analyze the evolution of the incidence of these diseases. The study included 1950 patients with pemphigus and 5424 patients with pemphigoid. Incidence increased from 2016 to 2019. The main comorbidities were hypertension (40.19%) and diabetes mellitus (28.57%). Compared to patients with pemphigoid, those with pemphigus had a higher prevalence of neoplasms, osteoporosis, solid metastases and malignant lymphoma, while the prevalence of hypertension, kidney disease, diabetes, heart failure, dementia, chronic obstructive pulmonary disease and Parkinson's disease was higher in the pemphigoid group (p < 0.05). Therefore, since autoimmune bullous disorders are associated with diverse comorbidities and their incidence has risen in recent years, the establishment of strategies to prevent the main comorbidities in these patients is justified.
RESUMO
As a hazardous waste, water pickling liquors must be properly treated. An alternative consists of promoting the formation of ferrous salts from this residue due to their higher ferrous content. Since FeCl2·4H2O is widely used in several applications, obtaining pure crystals of this material appears to be an interesting prospect. However, this compound has scarcely been investigated. In the present work, FeCl2·4H2O crystals were obtained from water pickling liquors. Their structural and morphological characteristics were investigated by X-ray diffraction, scanning electron microscopy as well as Mössbauer spectroscopy. In addition, the photoluminescence study of the obtained samples was also assessed. It was observed that after some aging time, the obtained crystals changed in colour from green to more yellowish. As such, the aged sample was also evaluated, and their structural characteristics were compared with the original crystals. Despite this, the obtained crystals exhibit a FeCl2·4H2O structure, which is not modified with the aging of the sample.
RESUMO
The electrochemical energy storage performance of activated carbons (ACs) obtained from coffee-derived biowastes was assessed. ACs were obtained from spent coffee ground second waste, after polyphenol extraction, by means of a hydrothermal process followed by physical or chemical activation. The resulting materials exhibited microporous structures with a total specific area between 585 and 2330 m2·g-1. Scanning electron microscopy (SEM) revealed a highly porous microstructure in the case of the chemically activated carbons, while physical activation led to a cracked micro-sized morphology. The electrochemical properties of the materials for supercapacitor applications were investigated in 1 M Na2SO4. After chemical activation, the coffee-derived material displayed a capacitance of 84 F·g-1 at 1 A·g-1 in a 1.9 V voltage window, with 70% capacitance retention at 10 A·g-1 and 85% retention after 5000 cycles of continuous charge-discharge. This work demonstrates how coffee secondary biowaste can be conveniently activated to perform as electrochemical energy storage material, contributing to its revalorization and reinsertion in a circular economy.
Assuntos
Carvão Vegetal , Café , Capacitância Elétrica , Eletrodos , PorosidadeRESUMO
In this work, we analyzed the suitability of a versatile recombinant lipase, secreted by Ophiostoma piceae (OPEr) and produced in Pichia pastoris, as a catalyst of the synthesis of biodiesel. The enzyme was immobilized by five covalent procedures and by hydrophobicity on functionalized nanoparticles of magnetite or of a novel Zn/Mn oxide named G1. Then, they were tested for green production of biodiesel by solventless enzymatic transesterification of discarded cooking oil and methanol (1:4) at 25 °C. The results were compared with those shown by free OPEr and the commercial lipases Eversa® and Cal A®. Several preparations with immobilized OPEr produced high synthesis yields (>90% transesterification), comparable to those obtained with Eversa®, the commercial enzyme designed for this application. Three of the biocatalysts maintained their catalytic efficiency for nine cycles. The process catalyzed by AMNP-CH-OPEr was scaled from 500 µL to 25 mL (50 times), improving its efficiency.
RESUMO
Existing fluorescent labels used in life sciences are based on organic compounds with limited lifetime or on quantum dots which are either expensive or toxic and have low kinetic stability in biological environments. To address these challenges, luminescent nanomaterials have been conceived as hierarchical, core-shell structures with spherical morphology and highly controlled dimensions. These tailor-made nanophosphors incorporate Ln:YVO4 nanoparticles (Ln = Eu(III) and Er(III)) as 50 nm cores and display intense and narrow emission maxima centered at â¼565 nm. These cores can be encapsulated in silica shells with highly controlled dimensions as well as functionalized with chitosan or PEG5000 to reduce nonspecific interactions with biomolecules in living cells. Confocal fluorescence microscopy in living prostate cancer cells confirmed the potential of these platforms to overcome the disadvantages of commercial fluorophores and their feasibility as labels for multiplexing, biosensing, and imaging in life science assays.
Assuntos
Materiais Biocompatíveis/química , Corantes Fluorescentes/química , Imagem Óptica , Neoplasias da Próstata/diagnóstico por imagem , Linhagem Celular Tumoral , Humanos , Elementos da Série dos Lantanídeos/química , Masculino , Teste de Materiais , Nanopartículas/química , Tamanho da Partícula , Compostos de Vanádio/química , Ítrio/químicaRESUMO
In this work, a deep characterization of the properties of K6Ta10.8O30 microrods has been performed. The starting material used to grow the microrods has been recovered from mining tailings coming from the Penouta Sn-Ta-Nb deposit, located in the north of Spain. The recovered material has been submitted to a thermal treatment to grow the microrods. Then, they have been characterized by scanning electron microscopy, X-ray diffraction, micro-Raman and micro-photoluminescence. The results of our study confirm that the K6Ta10.8O30 microrods have a tetragonal tungsten bronze-like crystal structure, which can be useful for ion-batteries and photocatalysis.
RESUMO
By the use of the tertiary amine A327 and 1 M HCl solution as precursors, the ionic liquid A327H+Cl- was generated and used to investigate its performance in the transport of Au(III) from hydrochloric acid medium. The influence of the stirring speed (600-1800 min-1), ionic liquid concentration (1.25-50% v/v) in the membrane phase, and gold concentration (0.01-0.15 g/L) in the feed phase on metal transport have been investigated. An equation which included both equilibrium and kinetics parameters was derived, and the membrane diffusional resistance (Δm) and feed phase diffusional resistance (Δf) was estimated as 9.5 × 106 s/cm and 307 s/cm, respectively. At carrier concentrations in the 5-50% v/v range and gold concentrations in the 0.01-0.15 g/L range, metal transport is controlled by diffusion of metal species through the feed boundary layer, whereas at the lowest carrier concentrations, membrane diffusion is predominant. From the receiving solutions, gold can be recovered as gold nanoparticles.
RESUMO
Revalorizing organic biowaste is critical to achieve a full circular economy, where waste is transformed into resources. One of the main strategies is to produce activated carbons and use them as functional materials for electrochemical energy storage. In this study, winemaking wastes, bagasse (BAG), and cluster stalks (CS) were recovered and used in the preparation of activated carbons by a hydrothermal process. Then, they were chemically activated using KOH and investigated for electrochemical capacitor applications. The activation treatment resulted in microporous structures, characterized by a type I isotherm for low partial pressures (P/P 0), and a type IV for higher pressures, as observed by Brunauer-Emmett-Teller surface analysis, with specific surfaces of 1,861 and 2,662 m2·g-1 for BAG and CS, respectively. These microporous structures were also investigated by means of scanning electron microscopy, revealing a high porous degree. Micro-Raman spectroscopy and X-ray photoelectron spectroscopy measurements displayed bands associated to disorder of the structure of the carbonaceous material. The electrochemical performance of the resulting materials was investigated for electrochemical energy storage applications, as supercapacitor electrode, in 1 M KOH aqueous electrolyte. These biowaste-derived materials displayed electrochemical double-layer capacitance, with 129 F·g-1 at 10 A·g-1 in the 0.1 to -1.0 V vs. saturated calomel electrode. For that reason, they are pin-pointed as potential negative electrodes for electrochemical double-layer supercapacitors and hybrid or asymmetric supercapacitors.
RESUMO
Oxides with Zn x Mn3-xO4 stoichiometries and ZnO were synthesized from the "black mass" material recovered from spent alkaline batteries. The oxides were characterized by XRF, XRD with Rietveld refinement, SEM, and TEM methods. Optical characterization included diffuse reflectance (DRS) and photoluminescence (PL) measurements. ZnO presented a clear band edge in the UV region, and PL signals were detected. The Zn/Mn oxides showed strong absorption in the UV region and a continuous absorption band in the Vis-IR regions. There is a non-detected PL signal due to excited charges being trapped on sub-band energy states and/or transfer by non-radiative paths. Photocatalytic activity under both irradiation conditions was evaluated using the resazurin dye test, terephthalic acid fluorescence probe method, and NOx air purification evaluation. In the three photoactivity tests, ZnO performed well under both UV and Vis irradiation, whereas no evidence of any appreciable photocatalytic activity was observed for the Zn/Mn oxides. The results are discussed in terms of the findings of previously reported optical measurements.
RESUMO
A valorization process of spent coffee grounds (SCG) was studied. Thus, a two-stage process, the first stage of polyphenols extraction and synthesis of a carbonaceous precursor and a subsequent stage of obtaining activated carbon (AC) by means of a carbonization process from the precursor of the previous stage, was performed. The extraction was carried out with a hydro-alcoholic solution in a pressure reactor, modifying time, temperature and different mixtures EtOH:H2O. To optimize the polyphenols extraction, a two-level factorial experimental design with three replicates at the central point was used. The best results were obtained by using a temperature of 80 °C during 30 min with a mixture of EtOH:H2O 50:50 (v/v). Caffeine and chlorogenic acid were the most abundant compounds in the analysed extracts, ranging from 0.09 to 4.8 mgâg-1 and 0.06 to 9.7 mgâg-1, respectively. Similarly, an experimental design was realized in order to analyze the influence of different variables in the AC obtained process (reaction time, temperature and KOH:precursor ratio). The best results were 1 h, 850 °C, and a mixture of 2.5:1. The obtained activated carbons exhibit a great specific surface (between 1600 m2âg-1 and 2330 m2âg-1) with a microporous surface. Finally, the adsorption capacity of the activated carbons was evaluated by methylene blue adsorption.
RESUMO
This paper describes the physicochemical study of the adsorption of dysprosium (Dy3+) in aqueous solution onto two types of activated carbons synthesized from spent coffee ground. Potassium hydroxide (KOH)-activated carbon is a microporous material with a specific Brunauer-Emmett-Teller (BET) surface area of 2330 m2·g-1 and pores with a diameter of 3.2 nm. Carbon activated with water vapor and N2 is a solid mesoporous, with pores of 5.7 nm in diameter and a specific surface of 982 m2·g-1. A significant dependence of the adsorption capacity on the solution pH was found, but it does not significantly depend on the dysprosium concentration nor on the temperature. A maximum adsorption capacity of 31.26 mg·g-1 and 33.52 mg·g-1 for the chemically and physically activated carbons, respectively, were found. In both cases, the results obtained from adsorption isotherms and kinetic study were better a fit to the Langmuir model and pseudo-second-order kinetics. In addition, thermodynamic results indicate that dysprosium adsorption onto both activated carbons is an exothermic, spontaneous, and favorable process.
RESUMO
En el año 2017, el Plan director de Salud Mental y Adicciones de Catalunya, puso en marcha el Programa PAE-TPI (Programa de Atención Específica al Trastorno Psicótico Incipiente) después de unos años de corroborar la eficacia de los programas pilotos implementados desde el año 2007 en el territorio catalán. Este programa, es la propuesta de un método organizativo y de un proceso activo de gestión de la psicosis focalizada en la comunidad. Se basa en la detección precoz y la atención individualizada en la que, el vínculo, es uno de los puntos fuertes. Este artículo recoge la puesta en marcha y la preparación previa así como el tipo de intervención propuesta y realizada. También se aportarán datos descriptivos derivados del primer año de asistencia clínica. El programa abarca el área geográfica de Terrassa y Sant Cugat del Vallés
In 2017, the Master Plan for Mental Health and Addictions of Catalonia, launched the PAE-TPI Program (Program for Specific Attention to Incipient Psychotic Disorder) after a few years of corroborating the effectiveness of the pilot programs implemented since 2007 in the Catalan territory. This program is the proposal of an organizational method and a process active management of community-focused psychosis. Is based on the early detection and individualized attention in which the reliance is one of the strengths. This article includes the start-up and previous preparation as well as the type of intervention proposed and carried out. Descriptive data derived from the first year of clinical care will also be provided. The program covers the geographical area of Terrassa and Sant Cugat del Vallés