Optimization Study of the Capacity of Chlorella vulgaris as a Potential Bio-Remediator for the Bio-Adsorption of Arsenic (III) from Aquatic Environments.

This study examined the ability of the green microalgae Chlorella vulgaris to remove arsenic from aqueous solutions. A series of studies was conducted to determine the optimal conditions for biological arsenic elimination, including biomass amount, incubation time, initial arsenic level, and pH values. At 76 min, pH 6, 50 mgL-1 metal concentration, and 1 gL-1 bio-adsorbent dosage, the maximum removal of arsenic from an aqueous solution was 93%. The uptake of As (III) ions by C. vulgaris reached an equilibrium at 76 min of bio-adsorption. The maximum adsorptive rate of arsenic (III) by C. vulgaris was 55 mg/gm. The Langmuir, Freundlich, and Dubinin-Radushkevich equations were used to fit the experimental data. The best theoretical isotherm of Langmuir, Freundlich, or/and Dubinin-Radushkevich for arsenic bio-adsorption by Chlorella vulgaris was determined. To choose the best theoretical isotherm, the coefficient of correlation was used. The data on absorption appeared to be linearly consistent with the Langmuir (qmax = 45 mgg-1; R2 = 0.9894), Freundlich (kf = 1.44; R2 = 0.7227), and Dubinin-Radushkevich (qD-R = 8.7 mg/g; R2 = 0.951) isotherms. The Langmuir and Dubinin-Radushkevich isotherms were both good two-parameter isotherms. In general, Langmuir was demonstrated to be the most accurate model for As (III) bio-adsorption on the bio-adsorbent. Maximum bio-adsorption values and a good correlation coefficient were observed for the first-order kinetic model, indicating that it was the best fitting model and significant in describing the arsenic (III) adsorption process. SEM micrographs of treated and untreated algal cells revealed that ions adsorbed on the algal cell's surface. A Fourier-transform infrared spectrophotometer (FTIR) was used to analyze the functional groups in algal cells, such as the carboxyl group, hydroxyl, amines, and amides, which aided in the bio-adsorption process. Thus, C. vulgaris has great potential and can be found in eco-friendly biomaterials capable of adsorbing arsenic contaminants from water sources.

Bio-Characterization and Liquid Chromatography-Mass Spectrometry Analysis of Exopolysaccharides in Biofilm-Producing Cyanobacteria Isolated from Soil Crust: Exploring the Potential of Microalgal Biomolecules.

Exopolysaccharide-producing cyanobacterial strains in biological soil crusts are described, in addition to their chemical properties and antioxidant and flocculation activities. The EPSs from Pudukkottai blackish biological soil crusts (PBBSCs) showed significant amounts of total soluble proteins (0.1687 mg/mL) and carbohydrates (0.8056 mg/mL) compared with the Ariyalur blackish biological soil crusts (ABBSCs). LC-MS analysis of the cyanobacterial polysaccharides revealed the presence of natural sugars such as ribose and glucose/mannose, and uronic acids. The FTIR spectrum showed specific peak for OH and -NH stretching, C-H stretching, and carboxylic acids as the dominant groups in EPS. The in vitro DPPH assay of EPSs from PBBSCs showed 74.3% scavenging activity. Furthermore, the reducing power was determined to be 0.59 ata 500 mg/mL concentration, respectively. The extracted EPSs from the biological soil crust flocculated Kaolin clay suspension maximum at 500 mg/mL. Consequently, the cyanobacterial strain and exopolysaccharide characterization from the sacred forest's biological soil crust were analyzed for their bioactive potential, bio-crust diversity, and distribution.

Adsorptive recovery of arsenic (III) ions from aqueous solutions using dried Chlamydomonas sp.

The present study aimed to descry the effectiveness of dried microalga Chlamydomonas sp. for disposing of arsenic from aqueous solution. The study included examining the impact of some factors on algae's adsorption capacity (optimization study), such as initial concentrations of heavy metal, biosorbent doses, pH and contact time. All trials have been performed at constant temperature 25 °C and shaking speed of 300 rpm. The optimization studying indicated the pH 4, contact time at 60 min, temperature 25 °C and biomass concentration of 0.6 g/l were the best optimum conditions for the bioremediation activity with maximum removal percentage 95.2% and biosorption capacity 53.8 mg/g. Attesting of biosorption by applying FTIR (Fourier transfigure infrared), XRD (X-ray diffraction), SEM-EDX (Scanning Electron Microscope - Energy Dispersive X-ray), DLS (Dynamic light scarring) and ZP (Zeta Potential) was conducted. Also, Kinetics, isotherm equilibrium and thermodynamics were carried out to explain the plausible maximum biosorption capacity and biosorption rate of biosorbent q maximum.

Anticancer and Cytotoxicity Activity of Native and Modified Black Rice Flour on Colon Cancer Cell Lines.

This study is intended to evaluate the cytotoxicity of native and dual-modified black rice flour against the colon cancer cell line (HCT116) and mouse embryo cell line (3T3-L1) by using the MTT assay. The modification techniques applied to prepare rice flour samples were enzymatic modification and heat moisture treatment. In this study, the IC50 of native black rice flour and modified black rice flour was 255.78 µg/mL and 340.85 µg/mL, respectively. The result confirms that the native black rice flour has significant cytotoxic and anticancer potential against human colon cancer cells. In addition, the IC50 of native black rice flour and modified black rice flour on the 3T3-L1 cell line was found to be 345.96 µg/mL and 1106.94 µg/mL, respectively. The results showed that the native black rice flour had weak cytotoxicity, and modified black rice flour was nontoxic in both the cell lines. The active component of phytochemicals present in black rice flour has a potential role in preventing colon cancer.

Biosynthesis of silver nanoparticles by using of the marine brown alga Padina pavonia and their characterization.

Silver nanoparticles (AgNPs) are gaining considerable importance due to their attractive physicochemical properties for many applications. In the present study, (Ag NPs) were synthesized by the reduction of aqueous solutions of silver nitrate (AgNO3) with powder and solvent extracts of Padina pavonia (brown algae). The obtained nanoparticles exhibited high stability, rapid formation of the biogenic process (2 min -3 h), small size (49.58-86.37 nm) (the diameter of formed nanoparticles was measured by TEM and DLS) and variable shapes (spherical, triangular, rectangle, polyhedral and hexagonal). Preliminary characterization of nanoparticles was monitored by using UV-visible spectroscopy (UV-vis), Transmission Electron Microscopy (TEM), Dynamic Light Scattering (DLS) and finally by Fourier Transform Infrared spectroscopy (FTIR). The ratios of converted Ag NPs were recorded as 88.5; 86.2 and 90.5% in case of P. pavonia powder. extract and chloroform extract, respectively.