Coordination and expertise foster legal textualism.

A cross-cultural survey experiment revealed a dominant tendency to rely on a rule's letter over its spirit when deciding which behaviors violate the rule. This tendency varied markedly across (k = 15) countries, owing to variation in the impact of moral appraisals on judgments of rule violation. Compared with laypeople, legal experts were more inclined to disregard their moral evaluations of the acts altogether and consequently exhibited stronger textualist tendencies. Finally, we evaluated a plausible mechanism for the emergence of textualism: in a two-player coordination game, incentives to coordinate in the absence of communication reinforced participants' adherence to rules' literal meaning. Together, these studies (total n = 5,794) help clarify the origins and allure of textualism, especially in the law. Within heterogeneous communities in which members diverge in their moral appraisals involving a rule's purpose, the rule's literal meaning provides a clear focal point-an identifiable point of agreement enabling coordinated interpretation among citizens, lawmakers, and judges.

Size-Dependent Optical Properties of InP Colloidal Quantum Dots.

Indium phosphide colloidal quantum dots (CQDs) are the main alternative for toxic and restricted Cd based CQDs for lighting and display applications. Here we systematically report on the size-dependent optical absorption, ensemble, and single particle photoluminescence (PL) and biexciton lifetimes of core-only InP CQDs. This systematic study is enabled by improvements in the synthesis of InP CQDs to yield a broad size series of monodisperse core-only InP CQDs with narrow absorption and PL line width and significant PL quantum yield.

Moral appraisals guide intuitive legal determinations.

OBJECTIVES: We sought to understand how basic competencies in moral reasoning influence the application of private, institutional, and legal rules. HYPOTHESES: We predicted that moral appraisals, implicating both outcome-based and mental state reasoning, would shape participants' interpretation of rules and statutes-and asked whether these effects arise differentially under intuitive and reflective reasoning conditions. METHOD: In six vignette-based experiments (total N = 2,473; 293 university law students [67% women; age bracket mode: 18-22 years] and 2,180 online workers [60% women; mean age = 31.9 years]), participants considered a wide range of written rules and laws and determined whether a protagonist had violated the rule in question. We manipulated morally relevant aspects of each incident-including the valence of the rule's purpose (Study 1) and of the outcomes that ensued (Studies 2 and 3), as well as the protagonist's accompanying mental state (Studies 5 and 6). In two studies, we simultaneously varied whether participants decided under time pressure or following a forced delay (Studies 4 and 6). RESULTS: Moral appraisals of the rule's purpose, the agent's extraneous blameworthiness, and the agent's epistemic state impacted legal determinations and helped to explain participants' departure from rules' literal interpretation. Counter-literal verdicts were stronger under time pressure and were weakened by the opportunity to reflect. CONCLUSIONS: Under intuitive reasoning conditions, legal determinations draw on core competencies in moral cognition, such as outcome-based and mental state reasoning. In turn, cognitive reflection dampens these effects on statutory interpretation, allowing text to play a more influential role. (PsycInfo Database Record (c) 2023 APA, all rights reserved).

Law, Coercion and Folk Intuitions.

In discussing whether legal systems are necessarily coercive, legal philosophers usually appeal to thought experiments involving angels or other morally driven beings who need no coercion to organise their social lives. Such appeals have invited criticism. Critics have not only challenged the relevance of such thought experiments to our understanding of legal systems; they have also argued that, contrary to the intuitions of most legal philosophers, the 'man on the Clapham Omnibus' would not hold that there is law in a society of angels because the view that law is necessarily coercive 'enjoys widespread support among laypersons'. This is obviously an empirical claim. Critics, however, never systematically polled the 'man on the Clapham Omnibus'. We boarded that bus. This article discusses findings from five empirical studies on the relationship between law and coercion.

Limits of Defect Tolerance in Perovskite Nanocrystals: Effect of Local Electrostatic Potential on Trap States.

One of the most promising properties of lead halide perovskite nanocrystals (NCs) is their defect tolerance. It is often argued that, due to the electronic structure of the conduction and valence bands, undercoordinated ions can only form localized levels inside or close to the band edges (i.e., shallow traps). However, multiple studies have shown that dangling bonds on surface Br- can still create deep trap states. Here, we argue that the traditional picture of defect tolerance is incomplete and that deep Br- traps can be explained by considering the local environment of the trap states. Using density functional theory calculations, we show that surface Br- sites experience a destabilizing local electrostatic potential that pushes their dangling orbitals into the bandgap. These deep trap states can be electrostatically passivated through the addition of ions that stabilize the dangling orbitals via ionic interactions without covalently binding to the NC surface. These results shed light on the formation of deep traps in perovskite NCs and provide strategies to remove them from the bandgap.

Evaluation of the condylar position in younger and older adults with or without temporomandibular symptoms by using cone beam computed tomography.

STATEMENT OF PROBLEM: Recent studies in young adults have questioned the influence of discrepancies between central and maximal intercuspal positions in temporomandibular disorders (TMDs). However, whether this finding was because this type of etiologic agent requires time for the development of changes in the condylar position is unclear. PURPOSE: The purpose of this clinical study was to use cone beam computed tomography (CBCT) to evaluate the presence or absence of discrepancies between the centric relation (CR) and maximum intercuspation (MI) in younger and older adults in populations with or without TMDs. MATERIAL AND METHODS: The sample was composed of 80 volunteers, 40 younger individuals aged 18 to 25 years (27 women and 13 men), half with and half without TMD symptoms, and 40 older participants aged 35 to 50 years (30 women and 10 men), half with and half without TMD symptoms. The TMD symptoms were diagnosed by using the diagnostic (standard) criteria for TMD research (RDC/TMD). Two CBCT scans were performed on each participant, one in MI and another in CR. Measurements of the joint space were performed in coronal and sagittal cuts of the temporomandibular joints, and the collected data were statistically analyzed by using the Mann-Whitney U test (α=.05). RESULTS: No significant differences were found when the CR and MI positions and the presence or absence of TMD symptoms were compared in the younger and older groups. However, when the younger and older groups were compared, significant differences were found in all measures used in this study. CONCLUSIONS: The condyle and mandibular fossa do not seem to be influenced by the CR or MI positions or by the presence or absence of TMD symptoms, but age seems to lead to a quantitative increase in the relationship between these structures.

Fractured alveolar process displacement evaluation-Effect of the rigidity of wire-composite splints.

BACKGROUNDS/AIMS: Traumatic dental injuries with bone fractures require rigid splinting. The degree of rigidity of the wire-composite splints can be challenging. The aim of this study was to evaluate the effect of the rigidity of different wire-composite splints on alveolar process displacement. MATERIAL AND METHODS: A model was created using polystyrene resin to simulate the anterior maxilla, bovine incisors to simulate maxillary incisors, and polyether impression material to simulate the periodontal ligament. An alveolar process fracture was created, while maintaining the labial bone connection with the PDL. Four wire-composite splints (0.3, 0.6, 0.9, and 1.2 mm in diameter) were compared with models without splints and with no fracture (n = 5). The alveolar process displacement was measured (3 times per model/per splint type) at the fractured and adjacent central incisor regions using a deflectometer (Instron) under functional cycling and static loading (100 N). Data (µm) were analyzed using RM ANOVA, followed by Tukey's HSD test (α = 0.05). RESULTS: The displacement at the region of the adjacent incisor was not influenced by the splint during static and cycling load (P > .05). The Tukey test demonstrated that the model without splints had significantly higher alveolar process displacement at the traumatized teeth than that of all other splint models (P < .001). Increasing the wire diameter from 0.3 mm to 0.9 mm significantly reduced the alveolar process displacement (P < .001). No difference was observed between the 0.9 mm (P = .123) and 1.2 mm (P = .219) wire-composite splints irrespective of the measured tooth regions. CONCLUSIONS: The rigidity of the wire-composite splint significantly influenced the mobility of the fractured alveolar process. The use of at least 0.9 mm wire was effective in reducing the fractured alveolar process displacement to a level that was similar to the adjacent teeth.

Using 14C-glyphosate to investigate the distribution of two formulations in transgenic glyphosate-resistant soybean.

Glyphosate residues in grain can be explained by the concentrations and formulations of glyphosate products. This study aimed to evaluate the residues from glyphosate formulations labeled with 14C-glyphosate applied to leaves of glyphosate-resistant soybean (GRS) in two life cycles by liquid scintillation spectrometry. Different plant tissues were analyzed after the end of the plants' life cycles. The experimental design was four repetitions of three treatments: Roundup® Original, Roundup Ready®, and unformulated glyphosate (control). The application of the dosing solution was 120 µL on the first four trifoliate leaves (10 µL per leaflet) of each plant, deposited manually with a 1-µL dispenser. All treatment solutions were calculated at a 1.2 kg a.e ha-1 of glyphosate. Glyphosate formulations of Roundup® Original and Roundup Ready® increased 14C-glyphosate distribution in GRS compared to the unformulated herbicide, regardless of the experiment (first or second cycle). Overall, the percentages of total radioactivity applied (18.33 kBq) found in grains were less than 5%. Grains, stems, and leaves showed the highest levels of herbicide residues compared to other parts of the plant. Despite the Roundup Ready® formulation having increased residues, the highest value found in grains, 1.95 mg kg-1, was less than 10 mg kg-1, the maximum residue limit (MRL) in Brazil.

Cs3Cu4In2Cl13 Nanocrystals: A Perovskite-Related Structure with Inorganic Clusters at A Sites.

An effort to synthesize the Cu(I) variant of a lead-free double perovskite isostructural with Cs2AgInCl6 resulted in the formation of Cs3Cu4In2Cl13 nanocrystals with an unusual structure, as revealed by single-nanocrystal three-dimensional electron diffraction. These nanocrystals adopt a A2BX6 structure (K2PtCl6 type, termed vacancy ordered perovskite) with tetrahedrally coordinated Cu(I) ions. In the structure, 25% of the A sites are occupied by [Cu4Cl]3+ clusters (75% by Cs+), and the B sites are occupied by In3+. Such a Cs3Cu4In2Cl13 compound prepared at the nanoscale is not known in the bulk and is an example of a multinary metal halide with inorganic cluster cations residing in A sites. The stability of the compound was supported by density functional theory calculations that also revealed that its bandgap is direct but parity forbidden. The existence of the Cs3Cu4In2Cl13 structure demonstrates that small inorganic cluster cations can occupy A sites in multinary metal halides.

Factors associated with the stability of compensatory orthodontic treatment of Class III malocclusion in the permanent dentition.

INTRODUCTION: This study aimed to assess the stability of compensatory treatment of Class III malocclusion in permanent dentition. METHODS: Thirty-six patients (21 women and 15 men; mean age, 20 years) with Class III malocclusion were subjected to the compensatory treatment of permanent dentition and followed up for at least 3 years after orthodontic treatment (T3). Multivariate Poisson regression was performed to assess the influence of clinical, cephalometric, and dental cast variables at the beginning (T1) and the end of treatment on the stability of Class III malocclusion. RESULTS: Overjet changed from -0.25 mm (-3 to 0.5 mm) at T1 to 1.4 mm (1-2.5 mm) at the end of treatment and 0.8 mm (0-1.5 mm) at T3. Clinical relapse (overjet <1 mm and/or canine Class III relations) was observed in 11 patients (30.6%). Patients treated with extraction of mandibular premolars (risk ratio [RR] = 2.13 × 10-07, P <0.001), with better orthodontic end outcomes (RR = 1.16, P = 0.009) and which had lower maxillary incisor inclination at T1 (RR = 1.08, P = 0.035) showed a lower risk of relapse. Demographic (sex, age), clinical (length of treatment and posttreatment, number of treatment phases, time of Class III elastics), cephalometric (SNA, SNB, ANB, Wits appraisal, SNGoGn, IMPA), and dental cast (peer assessment rating index and arch dimensions) variables were not significantly associated with clinical relapse at T3. CONCLUSIONS: The stability of compensatory treatment of Class III malocclusion in permanent dentition is multifactorial, with few predictive variables. Patients treated with extraction and better orthodontic finishing had a lower risk of relapse, whereas larger maxillary incisor inclination at baseline increased the risk of relapse.

Interaction of space allowance and diet on growth performance and physiological responses of piglets raised in tropical conditions.

Intensification of pig production in developing countries has resulted in increased number of animals per unit area leading to welfare and growth performance issues. This study was then performed to evaluate the effects of space allowance and dietary energy and amino acid content on growth performance and physiological parameters of piglets reared under tropical conditions. A total of 1280 piglets (castrated males and females) with initial body weight of 5.9 ± 0.4 kg were used. Animals were distributed in a 2 × 2 factorial arrangement composed by two space allowances (0.30 and 0.22 m2/animal) and two diets during 43 to 63 days of age (control and experimental diet with increased ME and AA content). The experimental period lasted 42 days subdivided into four phases according to the growth stage of the animals: pre-initial I (21 to 27 days of age), pre-initial II (28 to 34 days), initial I (35 to 42 days), and initial II (43 to 63 days). During pre-initial I and II, and initial I phases, pigs housed at a space allowance of 0.30 and 22 m2/animal had similar (P > 0.05) feed intake, weight gain, and feed conversion. During initial phase II, space allowance did not affect (P > 0.05) feed intake nor weight gain of the animals. Whereas, pigs fed the experimental diet had greater weight gain when compared to the control group (530 vs. 515 g/day, P = 0.03). According to our results, reducing space allowance from 0.30 to 22 m2/animal during the nursery phase (21 to 63 days of age) had negligible effects on piglet feed intake and weight gain, whereas feeding piglets with diets containing higher energy and amino levels resulted in greater weight gain.

Three-dimensional finite element stress analysis of teeth adjacent to a traumatized incisor.

BACKGROUND/AIMS: Dental trauma is the cause of several consequences to the injured tooth. However, the stresses and strains at adjacent teeth non-directly impacted as a possible cause of sequelae are still unknown. The aim of this study was to evaluate the stress distribution in incisors adjacent to an upper central incisor when it suffers a frontal impact in order to identify a potential explanation for sequelae in non-traumatized teeth. MATERIALS AND METHODS: A three-dimensional (3D) finite element model of the maxillary central incisors, lateral incisors and canines was created from a cone-beam scan of a patient with normal occlusion. Non-linear dynamic impact analysis was performed, simulating the right central incisor being impacted by a steel ball with a velocity of 10 m/s. A functional chewing load (100 N) on the palatal surface of the central incisor was simulated for comparison. Displacements, strains and modified von Mises stresses were calculated for the adjacent teeth. RESULTS: During impact on the central incisor, the adjacent teeth showed root displacement. Considerable stress concentrations were observed on the palatal surfaces, proximal and labial surfaces of teeth adjacent to the traumatized incisor. Stresses in the adjacent teeth were higher than stresses calculated during functional biting. Compressive stresses were concentrated at the proximal areas of the adjacent incisors. High levels of deformation were found in the root dentin of adjacent teeth during the traumatic event. CONCLUSIONS: A frontal impact on an anterior tooth generated stresses at the roots of adjacent teeth. These stresses may play a role in clinically observed sequelae of teeth adjacent to traumatized teeth.

The Phosphine Oxide Route toward Lead Halide Perovskite Nanocrystals.

We report an amine-free synthesis of lead halide perovskite (LHP) nanocrystals, using trioctylphosphine oxide (TOPO) instead of aliphatic amines, in combination with a protic acid (e.g., oleic acid). The overall synthesis scheme bears many similarities to the chemistry behind the preparation of LHP thin films and single crystals, in terms of ligand coordination to the chemical precursors. The acidity of the environment and hence the extent of protonation of the TOPO molecules tune the reactivity of the PbX2 precursor, regulating the size of the nanocrystals. On the other hand, TOPO molecules are virtually absent from the surface of our nanocrystals, which are simply passivated by one type of ligand (e.g., Cs-oleate). Furthermore, our studies reveal that Cs-oleate is dynamically bound to the surface of the nanocrystals and that an optimal surface coverage is critical for achieving high photoluminescence quantum yield. Our scheme delivers NCs with a controlled size and shape: only cubes are formed, with no contamination with platelets, regardless of the reaction conditions that were tested. We attribute such a shape homogeneity to the absence of primary aliphatic amines in our reaction environment, since these are known to promote the formation of nanocrystals with sheet/platelet morphologies or layered phases under certain reaction conditions. The TOPO route is particularly appealing with regard to synthesizing LHP nanocrystals for large-scale manufacturing, as the yield in terms of material produced is close to the theoretical limit: i.e., almost all precursors employed in the synthesis are converted into nanocrystals.

Colloidal Monolayer ß-In2Se3 Nanosheets with High Photoresponsivity.

We report a low-temperature colloidal synthesis of single-layer, five-atom-thick, ß-In2Se3 nanosheets with lateral sizes tunable from ∼300 to ∼900 nm, using short aminonitriles (dicyandiamide or cyanamide) as shape controlling agents. The phase and the monolayer nature of the nanosheets were ascertained by analyzing the intensity ratio between two diffraction peaks from two-dimensional slabs of the various phases, determined by diffraction simulations. These findings were further backed-up by comparing and fitting the experimental X-ray diffraction pattern with Debye formula simulated patterns and with side-view high-resolution transmission electron microscopy imaging and simulation. The ß-In2Se3 nanosheets were found to be indirect band gap semiconductors (Eg = 1.55 eV), and single nanosheet photodetectors demonstrated high photoresponsivity and fast response times.

Dissociative Recombination of Acetone Fragments, Adducts, and Dimer Ions.

The room temperature dissociative recombination of ions formed in an acetone/argon plasma has been studied using the flowing afterglow Langmuir probe-mass spectrometer method. By changing the concentration of acetone density, it is possible to have a plasma dominated by different types of ions (fragments, adducts, and dimer ions). The application of these measurements to astrophysical plasmas is discussed.

Cone-beam tomography assessment of the condylar position in asymptomatic and symptomatic young individuals.

STATEMENT OF PROBLEM: Studies of the condyle-mandibular fossa relationship are common, although the role of this relationship in the development of a temporomandibular disorder remains controversial. PURPOSE: The purpose of this study was to quantitatively evaluate the condyle-mandibular fossa relationship in young individuals with intact dentitions and compare it to that between individuals with and without symptoms of temporomandibular disorder. MATERIAL AND METHODS: Volunteers were classified as asymptomatic (n=20) or symptomatic (n=20) according to research diagnostic criteria for temporomandibular disorders. Each participant underwent 2 cone beam-computed tomography scans of the middle and lower third of the face: 1 scan of the maximum intercuspation position and 1 of the centric relationship position. The distance between the condyle and mandibular fossa was measured on frontal and lateral images of the temporomandibular joint. The condylar position was compared across groups (asymptomatic, symptomatic) by using the Mann-Whitney U test (α=.05). Within each group, the condylar position was compared across maximum intercuspation and centric relationship positions by using the Mann-Whitney U test (α=.05). RESULTS: No statistically significant differences were found in condylar positions between centric relationships and maximum intercuspation in either asymptomatic or symptomatic young adults, and no significant differences were found between asymptomatic and symptomatic young adults. CONCLUSIONS: The condyle-mandibular fossa relationships of these young adults were similar in the centric relationships and maximum intercuspation positions when evaluated by computed tomography. The presence or absence of temporomandibular disorder was not correlated with the condyle position in the temporomandibular joint.

Random Apollonian networks with tailored clustering coefficient.

We introduce a family of complex networks that interpolates between the Apollonian network and its binary version, recently introduced in E. M. K. Souza et al. [Phys. Rev. E 107, 024305 (2023)2470-004510.1103/PhysRevE.107.024305], via random removal of nodes. The dilution process allows the clustering coefficient to vary from C=0.828 to C=0 while maintaining the behavior of average path length and other relevant quantities as in the deterministic Apollonian network. Robustness against the random deletion of nodes is also reported on spectral quantities such as the ground-state localization degree and its energy gap to the first excited state. The loss of the 2π/3 rotation symmetry as a treelike network emerges is investigated in the light of the hub wavefunction amplitude. Our findings expose the interplay between the small-world property and other distinctive traits exhibited by Apollonian networks, as well as their resilience against random attacks.

Genetic Background Strongly Influences the Impact of Carrying the Thr92Ala-DIO2 Polymorphism in the Male Mouse.

About half of the world population carries at least one allele of the Ala92-DIO2, which slows down the activity of the type 2 deiodinase (D2), the enzyme that activates T4 to T3. Carrying the Ala92-DIO2 allele has been associated with increased body mass index and insulin resistance, but this has not been reproduced in all populations. To test if the genetic background affects the impact of this polymorphism, here we studied the genetically distant C57Bl/6J (B6) and FVB/N (FVB) mice carrying the Ala92-Dio2 allele as compared to control mice carrying the Thr92-Dio2 allele. Whereas B6-Ala92-Dio2 and B6-Thr92-Dio2 mice-fed chow or high-fat diet-behaved metabolically similar in studies using indirect calorimetry, glucose- and insulin tolerance tests, and measuring white adipose tissue (WAT) weight and liver steatosis, major differences were observed between FVB-Ala92-Dio2 and FVB-Thr92-Dio2 mice: carrying the Ala92-Dio2 allele (on a chow diet) resulted in hypercholesterolemia, smaller WAT pads, hepatomegaly, steatosis, and transcriptome changes in the interscapular brown adipose tissue (iBAT) typical of ER stress and apoptosis. Acclimatization at thermoneutrality (30 °C) eliminated most of the metabolic phenotype, indicating that impaired adaptive (BAT) thermogenesis can be involved. In conclusion, the metabolic impact of carrying the Ala92-Dio2 allele depends greatly on the genetic background of the mouse, varying from no phenotype in B6 mice to a major phenotype in FVB mice. These results will help the planning of future clinical trials studying the Thr92Ala-DIO2 polymorphism and may explain why some clinical studies performed in different populations across the globe have obtained inconsistent results.

Biomechanical behavior of three maxillary expanders in cleft lip and palate: a finite element study.

This study evaluated the stress distribution in the dentoalveolar and palatal bone structures during maxillary expansion in a 17-year-old male patient with bilateral cleft lip and palate (BCLP) using expanders with dental (HYRAX) and skeletal anchorage (MARPE). For the generation of the specific finite element models, cone-beam computed tomography was used, and the DICOM files were exported to Mimics 3-Matic (Materialise) and Patran (MSC Software) software. Three specific three-dimensional models were generated: A) HYRAX: conventional four-banded hyrax screw (9 mm); B) MARPE-DS: 3 miniscrews (1.8 mm diameter - 5.4 mm length) and four-banded dental anchorage; and C) MARPE-NoDS: 3 miniscrews without dental anchorage. Maxillary expansion was simulated by activating the expanders transversely 1 mm on the "X" axis. HYRAX resulted in higher levels of deformation predominantly in the dentoalveolar region. MARPE-DS showed stress in the dentoalveolar region and mainly in the center of the palatal region, at approximately 4,000 µÎµ. MARPE-NoDS exhibited evident stress only in the palatal region. High stress levels in the root anchoring teeth were observed for HYRAX and MARPE-DS. In contrast, MARPE-NoDS cause stress on the tooth structure. The stress distribution from the expanders used in the BLCP showed asymmetric expansive behavior. During the initial activation phase of expansion, the HYRAX and MARPE-DS models produced similarly high strain at the dentoalveolar structures and upper posterior teeth displacement. The MARPE-NoDS model showed restricted strain on the palate.

Near-Unity Photoluminescence Quantum Yield of Core-Only InP Quantum Dots via a Simple Postsynthetic InF3 Treatment.

Indium phosphide (InP) quantum dots (QDs) are considered the most promising alternative for Cd and Pb-based QDs for lighting and display applications. However, while core-only QDs of CdSe and CdTe have been prepared with near-unity photoluminescence quantum yield (PLQY), this is not yet achieved for InP QDs. Treatments with HF have been used to boost the PLQY of InP core-only QDs up to 85%. However, HF etches the QDs, causing loss of material and broadening of the optical features. Here, we present a simple postsynthesis HF-free treatment that is based on passivating the surface of the InP QDs with InF3. For optimized conditions, this results in a PLQY as high as 93% and nearly monoexponential photoluminescence decay. Etching of the particle surface is entirely avoided if the treatment is performed under stringent acid-free conditions. We show that this treatment is applicable to InP QDs with various sizes and InP QDs obtained via different synthesis routes. The optical properties of the resulting core-only InP QDs are on par with InP/ZnSe/ZnS core-shell QDs, with significantly higher absorption coefficients in the blue, and with potential for faster charge transport. These are important advantages when considering InP QDs for use in micro-LEDs or photodetectors.