Slotted Monopole Patch Antenna for Microwave-Based Head Imaging Applications.

A modified monopole patch antenna for microwave-based hemorrhagic or ischemic stroke recognition is presented in this article. The designed antenna is fabricated on a cost-effective FR-4 lossy material with a 0.02 loss tangent and 4.4 dielectric constant. Its overall dimensions are 0.32 λ × 0.28 λ × 0.007 λ, where λ is the lower bandwidth 1.3 GHz frequency wavelength. An inset feeding approach is utilized to feed the antenna to reduce the input impedance (z = voltage/current). A total bandwidth (below -10 dB) of 2.4 GHz (1.3-3.7 GHz) is achieved with an effective peak gain of over 6 dBi and an efficiency of over 90%. A time-domain analysis confirms that the antenna produces minimal signal distortion. Simulated and experimental findings share a lot of similarities. Brain tissue is penetrated by the antenna to a satisfactory degree, while still exhibiting a safe specific absorption rate (SAR). The maximum SAR value measured for the head model is constrained to be equal to or below 0.1409 W/kg over the entire usable frequency band. Evaluation of theoretical and experimental evidence indicates the intended antenna is appropriate for Microwave Imaging (MWI) applications.

Review of Microwaves Techniques for Breast Cancer Detection.

Conventional breast cancer detection techniques including X-ray mammography, magnetic resonance imaging, and ultrasound scanning suffer from shortcomings such as excessive cost, harmful radiation, and inconveniences to the patients. These challenges motivated researchers to investigate alternative methods including the use of microwaves. This article focuses on reviewing the background of microwave techniques for breast tumour detection. In particular, this study reviews the recent advancements in active microwave imaging, namely microwave tomography and radar-based techniques. The main objective of this paper is to provide researchers and physicians with an overview of the principles, techniques, and fundamental challenges associated with microwave imaging for breast cancer detection. Furthermore, this study aims to shed light on the fact that until today, there are very few commercially available and cost-effective microwave-based systems for breast cancer imaging or detection. This conclusion is not intended to imply the inefficacy of microwaves for breast cancer detection, but rather to encourage a healthy debate on why a commercially available system has yet to be made available despite almost 30 years of intensive research.

Enhancing the Performance of a Metal-Free Self-Supported Carbon Felt-Based Supercapacitor with Facile Two-Step Electrochemical Activation.

Carbon felt (CF) is an inexpensive carbon-based material that is highly conductive and features extraordinary inherent surface area. Using such a metal-free, low-cost material for energy storage applications can benefit their practical implementation; however, only limited success has been achieved using metal-free CF for supercapacitor electrodes. This work thoroughly studies a cost-effective and simple method for activating metal-free self-supported carbon felt. As-received CF samples were first chemically modified with an acidic mixture, then put through a time optimization two-step electrochemical treatment in inorganic salts. The initial oxidative exfoliation process enhances the fiber's surface area and ultimately introduced oxygen functional groups to the surface, whereas the subsequent reduction process substantially improved the conductivity. We achieved a 205-fold enhancement of capacitance over the as-received CF, with a maximum specific capacitance of 205 Fg-1, while using a charging current density of 23 mAg-1. Additionally, we obtained a remarkable capacitance retention of 78% upon increasing the charging current from 0.4 to 1 Ag-1. Finally, the cyclic stability reached 87% capacitance retention after 2500 cycles. These results demonstrate the potential utility of electrochemically activated CF electrodes in supercapacitor devices.

An infrared energy harvester based on radar cross-section reduction of chiral metasurfaces through phase cancellation approach.

Conventional metasurface absorbers rely on high dissipation losses by incorporating lossy materials. In this paper, we propose a novel mechanism of absorption based on phase cancellation of polarization states of scattered fields emerging from adjacent L-shaped chiral meta-atoms (unit cells). A linearly polarized wave forms helicoidal currents in each meta-atom leading to diagonally polarized radiated waves. When phase cancellation is employed by reorienting four such meta-atoms in a supercell configuration, contra-directed chiral currents flow in adjacent cells to cancel all the radiated fields in far-field region leading to a minimal broadside radar cross-section. From the reciprocity, the currents that are induced in the meta-atoms produce a null towards the incident direction which can be utilized for infrared energy harvesting. Full wave electromagnetic simulation indicates near perfect resonant absorption around 52.2 THz frequency. Enhanced bandwidth is shown by adding smaller resonators inside the supercell in nested form leading to dual band absorption at 45.2 THz and 53.15 THz.

Double-Sided Metasurface Array for a Dual-Band and Polarization-Independent Microwave-Energy-Harvesting System.

In this article, we present a simple and novel design of a double-sided metasurface for a dual-band and polarization-independent microwave-energy-harvesting system. The proposed metasurface is constructed from the dual-sided design of 8 × 8 unit cells. Different from the regular dual-band unit cells that contain two loops or multiple shapes of resonators printed in the same layer, the proposed metasurface is based on designing double loops, each combined with two arms of a dipole printed on the top and bottom sides of a single substrate. Thus, the bottom layer is utilized to generate the second frequency band of interest. Three main numerical simulations were conducted to investigate the performance of a single unit cell, a 2 × 2 supercell, and an array of an 8 × 8 metasurface structure. The numerical simulation demonstrated that 98% and 95% of the incident energy is collected at two bands of 1.8 and 6.5 GHz for the proposed harvester.

Near Field Breast Tumor Detection Using Ultra-Narrow Band Probe with Machine Learning Techniques.

In this work, we propose a near-field microwave sensing modality that uses a single probe combined with a classification algorithm to help in detecting the presence of tumors in the human female breast. The concept employs a near-field resonant probe with an ultra-narrow frequency response. The resonant probe is highly sensitive to the changes in the electromagnetic properties of the breast tissues such that the presence of the tumor is gauged by determining the changes in the magnitude and phase response of the sensor's reflection coefficient. A key feature of our proposed detection concept is the simultaneous sensing of tissue property changes to the two female breasts since the right and left healthy breasts are morphologically and materially identical. Once the probe response is recorded for both breasts, the Principle Component Analysis (PCA) method is employed to emphasize the difference in the probe responses. For validation of the concept, tumors embedded in a realistic breast phantoms were simulated. To provide additional confidence in the detection modality introduced here, experimental results of three different sizes of metallic spheres, mimicking tumors, inserted inside chicken and beef meat were detected using an electrically-small probe operating at 200 MHz. The results obtained from the numerical tests and experiments strongly suggest that the detection modality presented here might lead to an inexpensive and portable early and regular screening for breast tumor.

Harvesting the Energy of Multi-Polarized Electromagnetic Waves.

We present the idea and design of a dual polarized metasurface for electromagnetic energy harvesting. A 4 × 4 super cell with alternating vias between adjacent cells was designed to allow for capturing the energy from various incident angles at an operating frequency of 2.4 GHz. The collected energy is then channeled to a feeding network that collects the AC power and feeds it to a rectification circuitry. The simulation results yielded a radiation to AC and an AC to DC conversion efficiencies of around 90% and 80%, respectively. As a proof of concept, an array consisting of 9 super cells was fabricated and measured. The experimental results show that the proposed energy harvester is capable of capturing up to 70% of the energy from a planewave having various polarizations and converting it to usable DC power.

A True Metasurface Antenna.

We present a true metasurface antenna based on electrically-small resonators. The resonators are placed on a flat surface and connected to one feed point using corporate feed. Unlike conventional array antennas where the distance between adjacent antennas is half wavelength to reduce mutual coupling between adjacent antennas, here the distance between the radiating elements is electrically very small to affect good impedance matching of each resonator to its feed. A metasurface antenna measuring 1.2λ × 1.2λ and designed to operate at 3 GHz achieved a gain of 12 dBi. A prototype was fabricated and tested showing good agreement between numerical simulations and experimental results. Through numerical simulation, we show that the metasurface antenna has the ability to provide beam steering by phasing all the resonators appropriately.