3D trapping of microbubbles by the Marangoni force.

In this Letter, we show 3D steady-state trapping and manipulation of vapor bubbles in liquids employing a low-power continuous-wave laser using the Marangoni effect. Light absorption from photodeposited silver nanoparticles on the distal end of a multi-mode optical fiber is used to produce bubbles of different diameters. The thermal effects produced by either the nanoparticles on the fiber tip or the light bulk absorption modulate the surface tension of the bubble wall and creates both longitudinal and transversal forces just like optical forces, effectively creating a 3D potential well. Using numerical simulations, we obtain expressions for the temperature profiles and present analytical expressions for the Marangoni force. In addition, using an array of three fibers with photodeposited nanoparticles is used to demonstrate the transfer of bubbles from one fiber to another by sequentially switching on and off the lasers.

Optothermal generation, trapping, and manipulation of microbubbles.

The most common approach to optically generate and manipulate bubbles in liquids involves temperature gradients induced by CW lasers. In this work, we present a method to accomplish both the generation of microbubbles and their 3D manipulation in ethanol through optothermal forces. These forces are triggered by light absorption from a nanosecond pulsed laser (λ = 532 nm) at silver nanoparticles photodeposited at the distal end of a multimode optical fiber. Light absorbed from each laser pulse quickly heats up the silver-ethanol interface beyond the ethanol critical-point (∼ 243 °C) before the heat diffuses through the liquid. Therefore, the liquid achieves a metastable state and owing to spontaneous nucleation converted to a vapor bubble attached to the optical fiber. The bubble grows with semi-spherical shape producing a counterjet in the final stage of the collapse. This jet reaches the hot nanoparticles vaporizing almost immediately and ejecting a microbubble. This microbubble-generation mechanism takes place with every laser pulse (10 kHz repetition rate) leading to the generation of a microbubbles stream. The microbubbles' velocities decrease as they move away from the optical fiber and eventually coalesce forming a larger bubble. The larger bubble is attracted to the optical fiber by the Marangoni force once it reaches a critical size while being continuously fed with each bubble of the microbubbles stream. The balance of the optothermal forces owing to the laser-pulse drives the 3D manipulation of the main bubble. A complete characterization of the trapping conditions is provided in this paper.

Optical trapping in the presence of laser-induced thermal effects.

The inclusion of thermal effects in optical manipulation has been explored in diverse experiments, increasing the possibilities for applications in diverse areas. In this Letter, the results of combined optical and thermal manipulation in the vicinity of a highly absorbent hydrogenated amorphous silicon layer, which induces both the generation of convective currents and thermophoresis, are presented. In combination with the optical forces, thermal forces help reduce the optical power required to trap and manipulate micrometric polystyrene beads. Moreover, the inclusion of these effects allows the stacking and manipulation of multiple particles with a single optical trap along with the beam propagation, providing an extra tool for micromanipulation of a variety of samples.

Exposure of humans to the zoonotic nematode Dirofilaria immitis in Northern Portugal.

Dirofilariosis caused by Dirofilaria immitis (heartworm) is a zoonosis, considered an endemic disease of dogs and cats in several countries of Western Europe, including Portugal. This study assesses the levels of D. immitis exposure in humans from Northern Portugal, to which end, 668 inhabitants of several districts belonging to two different climate areas (Csa: Bragança, Vila Real and Csb: Aveiro, Braga, Porto, Viseu) were tested for anti-D. immitis and anti-Wolbachia surface proteins (WSP) antibodies. The overall prevalence of seropositivity to both anti-D. immitis and WSP antibodies was 6.1%, which demonstrated the risk of infection with D. immitis in humans living in Northern Portugal. This study, carried out in a Western European country, contributes to the characterisation of the risk of infection with D. immitis among human population in this region of the continent. From a One Health point of view, the results of the current work also support the close relationship between dogs and people as a risk factor for human infection.

Stray Dogs of Sofia (Bulgaria) Could be an Important Reservoir of Heartworm (Dirofilaria Immitis).

Dirofilaria immitis (heartworm) is a zoonotic and an emerging disease, expanding in Europe. In Bulgaria, the presence of the parasite has been described in many regions. However, canine heartworm has hardly been evaluated in the capital of the country and, therefore, the aim of this study was to evaluate the prevalence and distribution of canine heartworm in Sofia. Eighty stray dogs from the city of Sofia and the metropolitan area were analysed for circulating D. immitis antigens. The prevalence was 31.25 %, being 34.7 % in the metropolitan area and 25.8 % in the city of Sofia. The current results are among the highest reported in the country. This could be due to the lack of prophylactic measures against infection in these dogs, but also to the spread of D. immitis into non-endemic countries. Stray dogs may act as an important reservoir of heartworm being a risk for client-owned animals and for the development of pulmonary dirofilariosis in inhabitants. The results show the need to establish further epidemiological studies and prophylactic campaigns for stray and client-owned animals, as well as to create awareness campaigns about the severity and importance of this disease for both animals and humans.

Marangoni force-driven manipulation of photothermally-induced microbubbles.

The generation and manipulation of microbubbles by means of temperature gradients induced by low power laser radiation is presented. A laser beam (λ = 1064 nm) is divided into two equal parts and coupled to two multimode optical fibers. The opposite ends of each fiber are aligned and separated a distance D within an ethanol solution. Previously, silver nanoparticles were photo deposited on the optical fibers ends. Light absorption at the nanoparticles produces a thermal gradient capable of generating a microbubble at the optical fibers end in non-absorbent liquids. The theoretical and experimental studies carried out showed that by switching the thermal gradients, it is possible to generate forces in opposite directions, causing the migration of microbubbles from one fiber optic tip to another. Marangoni force induced by surface tension gradients in the bubble wall is the driving force behind the manipulation of microbubbles. We estimated a maximum Marangoni force of 400nN for a microbubble with a radius of 110 µm.

Observation of Oscillatory Radial Electric Field Relaxation in a Helical Plasma.

Measurements of the relaxation of a zonal electrostatic potential perturbation in a nonaxisymmetric magnetically confined plasma are presented. A sudden perturbation of the plasma equilibrium is induced by the injection of a cryogenic hydrogen pellet in the TJ-II stellarator, which is observed to be followed by a damped oscillation in the electrostatic potential. The waveform of the relaxation is consistent with theoretical calculations of zonal potential relaxation in a nonaxisymmetric magnetic geometry. The turbulent transport properties of a magnetic confinement configuration are expected to depend on the features of the collisionless damping of zonal flows, of which the present Letter is the first direct observation.

Adsorption and growth of palladium clusters on graphdiyne.

The density functional formalism has been used to investigate the stability and the properties of small palladium clusters supported on graphdiyne layers. The large triangular holes existing on the graphdiyne structure provide efficient sites to hold the clusters at small distances from the plane of the graphdiyne layer. The cluster adsorption energies, between 3 and 4 eV, are large enough to maintain the clusters tightly bound to the triangular holes. The competition between dispersion of Pd atoms on graphdiyne and growth of Pd clusters in the triangular holes of the layer is also discussed. In addition, the triangular holes can be simultaneously decorated with clusters on both sides. This indicates that palladium clusters could be used to build nanostructures formed by stacked graphdiyne layers with tailored interlayer distances controlled by the size of the clusters. The size of the clusters also controls the electronic HOMO-LUMO gap of the material.

Searching for DFT-based methods that include dispersion interactions to calculate the physisorption of H2 on benzene and graphene.

Simulations of the hydrogen storage capacities of nanoporous carbons require an accurate treatment of the interaction of the hydrogen molecule with the graphite-like surfaces of the carbon pores, which is dominated by the dispersion forces. These interactions are described accurately by high level quantum chemistry methods, like the Coupled Cluster method with single and double excitations and a non-iterative correction for triple excitations (CCSD(T)), but those methods are computationally very expensive for large systems and for massive simulations. Density functional theory (DFT)-based methods that include dispersion interactions at different levels of complexity are less accurate, but computationally less expensive. In order to find DFT-methods that include dispersion interactions to calculate the physisorption of H2 on benzene and graphene, with a reasonable compromise between accuracy and computational cost, CCSD(T), Møller-Plesset second-order perturbation theory method, and several DFT-methods have been used to calculate the interaction energy curves of H2 on benzene and graphene. DFT calculations are compared with CCSD(T) calculations, in the case of H2 on benzene, and with experimental data, in the case of H2 on graphene. Among the DFT methods studied, the B97D, RVV10, and PBE+DCACP methods yield interaction energy curves of H2-benzene in remarkable agreement with the interaction energy curve obtained with the CCSD(T) method. With regards to graphene, the rev-vdW-DF2, PBE-XDM, PBE-D2, and RVV10 methods yield adsorption energies of the lowest level of H2 on graphene, very close to the experimental data.

Anomalous perovskite PbRuO3 stabilized under high pressure.

Perovskite oxides ABO3 are important materials used as components in electronic devices. The highly compact crystal structure consists of a framework of corner-shared BO6 octahedra enclosing the A-site cations. Because of these structural features, forming a strong bond between A and B cations is highly unlikely and has not been reported in the literature. Here we report a pressure-induced first-order transition in PbRuO3 from a common orthorhombic phase (Pbnm) to an orthorhombic phase (Pbn21) at 32 GPa by using synchrotron X-ray diffraction. This transition has been further verified with resistivity measurements and Raman spectra under high pressure. In contrast to most well-studied perovskites under high pressure, the Pbn21 phase of PbRuO3 stabilized at high pressure is a polar perovskite. More interestingly, the Pbn21 phase has the most distorted octahedra and a shortest Pb-Ru bond length relative to the average Pb-Ru bond length that has ever been reported in a perovskite structure. We have also simulated the behavior of the PbRuO3 perovskite under high pressure by first principles calculations. The calculated critical pressure for the phase transition and evolution of lattice parameters under pressure match the experimental results quantitatively. Our calculations also reveal that the hybridization between a Ru:t2g orbital and an sp hybrid on Pb increases dramatically in the Pbnm phase under pressure. This pressure-induced change destabilizes the Pbnm phase to give a phase transition to the Pbn21 phase where electrons in the overlapping orbitals form bonding and antibonding states along the shortest Ru-Pb direction at P > Pc.

Insight into the structure and functional application of the Sr0.95Ce0.05CoO3-δ cathode for solid oxide fuel cells.

A new perovskite cathode, Sr0.95Ce0.05CoO3-δ, performs well for oxygen-reduction reactions in solid oxide fuel cells (SOFCs). We gain insight into the crystal structure of Sr1-xCexCoO3-δ (x = 0.05, 0.1) and temperature-dependent structural evolution of Sr0.95Ce0.05CoO3-δ by X-ray diffraction, neutron powder diffraction, and scanning transmission electron microscopy experiments. Sr0.9Ce0.1CoO3-δ shows a perfectly cubic structure (a = a0), with a large oxygen deficiency in a single oxygen site; however, Sr0.95Ce0.05CoO3-δ exhibits a tetragonal perovskite superstructure with a double c axis, defined in the P4/mmm space group, that contains two crystallographically different cobalt positions, with distinct oxygen environments. The structural evolution of Sr0.95Ce0.05CoO3-δ at high temperatures was further studied by in situ temperature-dependent NPD experiments. At 1100 K, the oxygen atoms in Sr0.95Ce0.05CoO3-δ show large and highly anisotropic displacement factors, suggesting a significant ionic mobility. The test cell with a La0.8Sr0.2Ga0.83Mg0.17O3-δ-electrolyte-supported (∼300 µm thickness) configuration yields peak power densities of 0.25 and 0.48 W cm(-2) at temperatures of 1023 and 1073 K, respectively, with pure H2 as the fuel and ambient air as the oxidant. The electrochemical impedance spectra evolution with time of the symmetric cathode fuel cell measured at 1073 K shows that the Sr0.95Ce0.05CoO3-δ cathode possesses superior ORR catalytic activity and long-term stability. Mixed ionic-electronic conduction properties of Sr0.95Ce0.05CoO3-δ account for its good performance as an oxygen-reduction catalyst.

Seroprevalence of heartworm (Dirofilaria immitis) in feline and canine hosts from central and northern Portugal.

Dirofilaria immitis is endemic in Portugal. Several studies have reported the presence of canine heartworm disease, although no previous studies on feline infections have been published. The aim of this study was to determine the prevalence of D. immitis in cats and dogs from central and northern Portugal. Blood samples from 434 cats were tested for circulating anti-D. immitis and anti-Wolbachia antibodies. Furthermore, 386 dogs were tested for circulating D. immitis antigens. Overall feline seroprevalence was 15%, while canine prevalence was 2.1%. The highest feline seroprevalences of 18.7% and 17.6% were found in Aveiro and Viseu, respectively, while the highest canine prevalences of 8.8% and 6.8% were found in Coimbra and Aveiro, respectively. Cats and dogs showing respiratory signs presented higher prevalences of 24.4% and 17%, respectively, while 50% of cats with gastrointestinal signs were seropositive. The present study confirms the seropositivity of D. immitis in the feline population in central and northern Portugal, and suggests the importance of including heartworm disease in the list of differential diagnoses of cats and dogs showing clinical signs compatible with the disease.

Ab initio studies of propene epoxidation on oxidized silver surfaces.

Ab initio density functional simulations have been performed to study the adsorption of propene on partially oxidized silver surfaces and its interaction with surface oxygen. Two different adsorption conformations for propene are studied, with the molecule either intact or forming an Ag-C3H6-O oxymetallacycle (OMC) intermediate. Then, pathways for propene oxide, acrolein and propanone formation have been studied in detail, providing insight into the selectivity of the surfaces. We find that formation of acrolein must necessarily take place from OMC intermediates, requiring at least two neighbouring reactive surface oxygen anions. This suggests a strong relationship between the concentration of surface oxygen and the selectivity of these surfaces.

Crystal structure, phase transitions, and magnetic properties of iridium perovskites Sr2MIrO6 (M = Ni, Zn).

Double perovskites containing Ir(6+)/Ir(5+) with formula Sr2MIrO6 (M = Ni, Zn) have been synthesized under high oxygen pressure conditions. Their crystal structures have been studied by X-ray and neutron powder diffraction at room temperature (RT) and 2 K. At RT, these oxides crystallize in the monoclinic space group P2(1)/n with unit-cell parameters a ≈ √2a0, b ≈ √2a0, and c ≈ 2a0, and ß ≈ 90°. The thermal evolution of the structure of the Ni-containing compound shows the presence of two phase transition in the 373-673 K interval following the sequence P2(1)/n → I4/m → Fm3m. These materials have also been characterized by magnetic measurements, suggesting the onset of antiferromagnetic interactions at T(N) = 58 and 46 K, for M = Ni, Zn, respectively. X-ray absorption spectroscopy sheds light on the oxidation states of M and Ir ions within these double perovskites.

Tailoring structural and electronic properties of RuO2 nanotubes: a many-body approach and electronic transport.

The electrical conduction properties of ruthenium oxide nanocables are of high interest. These cables can be built as thin shells of RuO2 surrounding an inner solid nanowire of a dielectric insulating silica material. With this motivation we have investigated the structural, electronic and transport properties of RuO2 nanotubes using the density functional formalism, and applying many-body corrections to the electronic band structure. The structures obtained for the thinnest nanotubes are of the rutile type. The structures of nanotubes with larger diameters deviate from the rutile structure and have in common the formation of dimerized Ru-Ru rows along the axial direction. The cohesive energy shows an oscillating behavior as a function of the tube diameter. With the exception of the thinnest nanotubes, there is a correlation such that the electronic band structures of tubes with high cohesive energies show small gaps at the Fermi energy, whereas the less stable nanotubes exhibit metallic behavior, with bands crossing the Fermi surface. The electronic conductance of nanotubes of finite length connected to gold electrodes has been calculated using a Green-function formalism, and correlations have been established between the electronic band structure and the conductance at zero bias.

Vanishing neoclassical viscosity and physics of the shear layer in stellarators.

The drift kinetic equation is solved for low density TJ-II plasmas employing slowly varying, time-dependent profiles. This allows us to simulate density ramp-up experiments and describe from first principles the formation and physics of the radial electric field shear layer. The main features of the transition are perfectly captured by the calculation, and good quantitative agreement is also found. The results presented here, that should be valid for other nonquasisymmetric stellarators, provide a fundamental explanation for a wealth of experimental observations connected to the shear layer emergence in TJ-II. The key quantity is the neoclassical viscosity, which is shown to go smoothly to zero when the critical density is approached from below. This makes it possible for turbulence-related phenomena, and particularly zonal flows, to arise in the neighborhood of the transition.

Computerised vaccination register for the Murcia region, Spain, 1991 to 2011.

We describe the Murcia regional vaccination register in Spain, which was set up in 1991, detailing its main features, advantages and limitations. We also report on some recent special actions carried out that led to an improvement in vaccination coverage against measles, rubella and mumps (MMR): by using the vaccination register, we were able to identify and vaccinate persons aged under 20 years in a measles outbreak in 2010 in the town of Jumilla who were not adequately vaccinated for their age with MMR vaccine. From spring 2012, use of our register will enable us to identify susceptible individuals in our region under 40 years of age who have received fewer than two doses of MMR vaccine and call them for the appropriate vaccination. We also set out our experience in the use of barcodes to identify individuals and collect vaccine data: our data show that the barcodes help to improve data quality and completeness. Finally, we identify certain challenges in search of greater standardisation for systems and encoding that is necessary to enable an easy exchange of data between different registers.

Preferences of owners of overweight dogs when buying commercial pet food.

Most pet dogs in developed countries are fed commercial diets. The aim of this study was to evaluate the preferences of owners of overweight dogs when buying commercial pet food. The study was a descriptive observational multi-centre study on a group of 198 owners of urban household dogs. Personal interviews were conducted to examine the owners' opinions with questions rating the importance of certain qualities of prepared dog food. Bivariate analyses for comparisons of absolute means between groups of owners of dogs with excess weight (n = 137) and owners of normal weight dogs (n = 61) were made using the Mann-Whitney U-test. A low price (p < 0.001) and special offers (p = 0.008) of commercial dog food were more important for owners of dogs with excess weight than for owners of normal weight dogs. The quality of ingredients (p = 0.007) and the nutritional composition (p < 0.001) were more important for owners of normal weight dogs than for owners of dogs with excess weight. The veterinarian was the most important source of information on dog nutrition for both groups (83.6% for owners of normal weight dogs and 83.2% for owners of dogs with excess weight) (p = 0.88). The owners of dogs with excess weight had less interest in corrected dog nutrition than owners of normal weight dogs (p < 0.001).

Evaluation of acute phase proteins, adiponectin and endothelin-1 to determine vascular damage in dogs with heartworm disease (Dirofilaria immitis), before and after adulticide treatment.

Previous studies have shown the existence of an acute phase response in dogs with heartworm (Dirofilaria immitis), probably caused by the vascular inflammation that occurs during the pathogenesis of this disease. In addition, it has been seen that this acute phase response persists after finishing treatment, especially in dogs with pulmonary hypertension (PH). Furthermore, echocardiographic studies have shown that PH and endarteritis appear to persist for at least 10 months after completion of adulticide treatment, suggesting that the vascular changes in these dogs may not be reversible. Therefore, the objective of this study was to evaluate the serum concentrations of different positive acute phase proteins (APP) [C reactive-protein (CRP), haptoglobin and ferritin] and negative APP (albumin and paraoxonase-1 (PON-1)), and the usefulness of the endothelin-1 (ET-1) and adiponectin, in dogs infected by D. immitis to evaluate their usefulness as diagnostic biomarkers of vascular damage and PH and their progression throughout therapy up to 7 months after the end of adulticide treatment. Twenty-five heartworm-infected dogs received adulticide treatment, and serum measurements were performed on the day of diagnosis (day 0), day of discharge (day 90), and 6 months after discharge (day 270). In addition, presence or absence of PH was also echocardiographically determined using the Right Pulmonary Artery Distensibility Index. PH was present in 44% of the dogs on day 0 and day 90, and in 48% of dogs on day 270. Alterations were observed in the concentrations of all APP throughout the study, persisting the alterations in PON-1 and ferritin on day 270. Depending on the presence or absence of PH, CRP showed significant differences throughout the study, as did ET-1. On the other hand, adiponectin did not show variations throughout the study, so it did not seem a useful marker in this disease. These results could reflect the possible persistence of vascular inflammation up to 7 months after finishing treatment, whether or not there was PH, and consolidate the study of APP as useful markers in heartworm disease. Moreover, persistent PH could be the consequent clinical manifestation in dogs with more severe vascular alterations so the study of APP, especially CRP, and ET-1 could be especially advantageous in these patients in the early evaluation of the disease, as well as for the determination of disease severity, monitoring therapeutic responses, and predicting outcomes.

Magnetic structure of LaCrO3 perovskite under high pressure from in situ neutron diffraction.

The temperature-pressure phase diagram for both the crystal and magnetic structures of LaCrO(3) perovskite has been mapped out by in situ neutron-diffraction experiments under pressure. The system offers the opportunity to study the evolution of magnetic order, spin direction, and magnetic moment on crossing the orthorhombic-rhombohedral phase boundary. Moreover, a microscopic model of the superexchange interaction has been developed on the basis of the crystal structure obtained in this work to account for the behavior of T(N) under high pressure.