Graphene-mediated surface enhanced Raman scattering in silica mesoporous nanocomposite films.

Silica mesoporous nanocomposite films containing graphene nanosheets and gold nanoparticles have been prepared via a one-pot synthesis using silicon tetrachloride, gold(III) chloride tetrahydrate, a 1-N-vinyl-2-pyrrolidone dispersion of exfoliated graphene and Pluronic F127 as a structuring agent. The composite films have shown graphene-mediated surface-enhanced Raman scattering (G-SERS). Graphene has been introduced as dispersed bilayer sheets while gold has been thermally reduced in situ to form nanoparticles of around 6 nm which preferentially nucleate on the surface of the graphene nanosheets. The presence of graphene and gold nanoparticles does not interfere with the self-assembly process and the formation of silica mesoporous films ordered as 2D hexagonal structures. The material has shown a remarkable analytical enhancement factor ranging from 80 up to 136 using rhodamine 6G as a Raman probe. The films have been characterised by grazing incidence X-ray diffraction, FTIR and UV-vis spectroscopy studies; transmission electron microscopy and spectroscopic ellipsometry have been used to study the morphology, thickness and porosities of the samples. Raman spectroscopy has been employed to characterise the graphene nanosheets embedded into the mesoporous films and the enhanced Raman scattering.

Stimuli responsive hydrogels prepared by frontal polymerization.

Frontal polymerization was used as an alternative method for the easy and fast preparation of polymer hydrogels prepared from N-isopropylacrylamide (NIPAAm) and N-vinylcaprolactam (VCL), the latter being less toxic and less expensive than NIPAAm. All samples were characterized in terms of their swelling behavior, and their thermal properties were investigated by DSC. It was found that VCL influences both pore size and shape distribution. Moreover, also the swelling ratio of the materials is dependent on the monomer ratio. Eventually, by a comparison with analogous samples prepared by the classical polymerization technique, it was found that the two methods give rise to hydrogels characterized by very diverse swelling capability; furthermore, swelling reversibility was also found to be different when temperature is allowed to cyclically vary between values that are below and above the lower critical solution temperature. In particular, samples prepared by frontal polymerization are characterized by lower swelling ratio and larger swelling recovery capability.

Sliding Crosslinked Thermoresponsive Materials: Polypseudorotaxanes Made of Poly(N-Isopropylacrylamide) and Acrylamide-γ-Cyclodextrin.

Novel polypseudorotaxanes (PPR) based on poly(N-isopropylacrylamide) (PNIPAAm) and acrylamide-γ-cyclodextrin (AγCD) are successfully synthesized. AγCD gives rise to sliding crosslinking systems and influences the thermoresponsive and swelling behavior of PNIPAAm hydrogels. Namely, their lower critical solution temperature (LCST) can be tuned up to 38°C, thus making the resulting materials of great interest in biomedical applications. Also, AγCD influences the thermal and mechanical properties of hydrogels, by affecting the T g and E modulus values.

Synthesis and characterization of poly(2-hydroxyethylacrylate)/ß-cyclodextrin hydrogels obtained by frontal polymerization.

For the first time, the synthesis of polymeric hydrogels containing cyclodextrins (CDs) obtained by frontal polymerization (FP) is reported. In particular, the effects of CDs on poly(2-hydroxyethylacrylate) hydrogel properties are investigated. In a first series of materials, ß-cyclodextrin is dispersed into the polymer matrix, while in the second one acryloyl-ß-cyclodextrin is grafted to poly(2-hydroxyethylacrylate) chains. FP parameters (front velocity and maximum temperature), swelling properties, glass transition temperatures and mechanical properties of the hydrogels are studied. Results show that both types of cyclodextrin influence the above properties, and the major effects are found for concentration higher than 1mol% of acryloyl-ß-cyclodextrin. Namely, a significant increase of glass transition temperature and of compression moduli are found. Finally, this study demonstrates that FP is a convenient technique to obtain CD-containing hydrogels, in which the type and amount of cyclodextrin can be suitably modulated to tune polymer properties, in function of the desired hydrogel applications.

Synthesis and characterization of functionally gradient materials obtained by frontal polymerization.

Functionally gradient materials (FGMs) with gradual and continuous changes of their properties in one or more dimensions are useful in a wide range of applications. However, obtaining such materials with accurate control of the gradient, especially when the gradient is nonlinear, is not easy. In this work, frontal polymerization (FP) was exploited to synthesize polymeric FGMs. We demonstrated that the use of ascending FP with continuous feeding of monomers with computer-controlled peristaltic pumps provided an excellent method for the preparation of functionally gradient materials with programmed gradients. To test the effectiveness of the method, copolymers made from triethylene glycol dimethacrylate/hexyl methacrylate with linear and hyperbolic gradient in composition were synthesized. Differential scanning calorimetry (DSC), Shore A hardness measurements, compression tests, and swelling studies were performed along the length of the materials to assess the relationship between the gradients and the material properties. Glass transition temperatures, determined by DSC, showed a linear dependence on the composition and were in agreement with theoretical values. The other properties showed different and specific behaviors as a function of the compositional gradient.

The production of concentrated dispersions of few-layer graphene by the direct exfoliation of graphite in organosilanes.

We report the formation and characterization of graphene dispersions in two organosilanes, 3-glycidoxypropyl trimethoxysilane (GPTMS) and phenyl triethoxysilane (PhTES) as new reactive solvents. The preparation method was mild and easy and does not produce any chemical modification. The dispersions, which exhibit the Tyndall effect, were characterized by TEM and Raman spectroscopy to confirm the presence of few-layer graphene. Concentrations as high as 0.66 and 8.00 mg/ml were found for PhTES and GPTMS, respectively. The latter is one of the highest values reported for a dispersion of graphene obtained by any method. This finding paves the way for the direct synthesis of polymer nanofiller-containing composites consisting of graphene and reactive silanes to be used in sol-gel synthesis, without any need for solvent removal, thus preventing graphene reaggregation to form graphite flakes.

Novel docetaxel-loaded nanoparticles based on poly(lactide-co-caprolactone) and poly(lactide-co-glycolide-co-caprolactone) for prostate cancer treatment: formulation, characterization, and cytotoxicity studies.

Docetaxel (Dtx) chemotherapy is the optional treatment in patients with hormone-refractory metastatic prostate cancer, and Dtx-loaded polymeric nanoparticles (NPs) have the potential to induce durable clinical responses. However, alternative formulations are needed to overcome the serious side effects, also due to the adjuvant used, and to improve the clinical efficacy of the drug.In the present study, two novel biodegradable block-copolymers, poly(lactide-co-caprolactone) (PLA-PCL) and poly(lactide-co-caprolactone-co-glycolide) (PLGA-PCL), were explored for the formulation of Dtx-loaded NPs and compared with PLA- and PLGA-NPs. The nanosystems were prepared by an original nanoprecipitation method, using Pluronic F-127 as surfactant agent, and were characterized in terms of morphology, size distribution, encapsulation efficiency, crystalline structure, and in vitro release. To evaluate the potential anticancer efficacy of a nanoparticulate system, in vitro cytotoxicity studies on human prostate cancer cell line (PC3) were carried out. NPs were found to be of spherical shape with an average diameter in the range of 100 to 200 nm and a unimodal particle size distribution. Dtx was incorporated into the PLGA-PCL NPs with higher (p < 0.05) encapsulation efficiency than that of other polymers. Differential scanning calorimetry suggested that Dtx was molecularly dispersed in the polymeric matrices. In vitro drug release study showed that release profiles of Dtx varied on the bases of characteristics of polymers used for formulation. PLA-PCL and PLGA-PCL drug loaded NPs shared an overlapping release profiles, and are able to release about 90% of drug within 6 h, when compared with PLA- and PLGA-NPs. Moreover, cytotoxicity studies demonstrated advantages of the Dtx-loaded PLGA-PCL NPs over pure Dtx in both time- and concentration-dependent manner. In particular, an increase of 20% of PC3 growth inhibition was determined by PLGA-PCL NPs with respect to free drug after 72 h incubation and at all tested Dtx concentration. In summary, PLGA-PCL copolymer may be considered as an attractive and promising polymeric material for the formulation of Dtx NPs as delivery system for prostate cancer treatment, and can also be pursued as a validated system in a more large context.