Sulfur Coordination Effects on the Stability and Activity of a Ruthenium-Based Water Oxidation Catalyst.

Water oxidation is regarded as the bottleneck of the water splitting and the development of water oxidation catalysts is of importance in the view of reducing reaction barriers and promoting water oxidation efficiency. Recently, the Sun group has disclosed a family of highly active water oxidation catalysts, [Ru(bda)(L)2] (bda2- = 2,2'-bipyridine-6,6'-dicarboxylate; L = N-containing ligands). Herein, we replaced the bda2- ligand with a 2,2'-bipyridine-6,6'-dicarbothioate (bct2-) ligand and prepared a mononuclear ruthenium complex [Ru(bct)(pic)2] (Ru-bct, pic = 4-picoline). Less equatorial ligand distortion is observed for RuII-bct which displays improved stability than RuII-bda. The Ru-bct complex undergoes chemical-structural evolution during electrochemical and chemical oxidation, generating Ru-bda as the intrinsic active species to afford water oxidation. This study provides an example to understand structure-stability-reactivity relationship of molecular water oxidation catalysts.

Lip Morphology and Aesthetics: Study Review and Prospects in Plastic Surgery.

The lip profile plays an important role in the perception of facial aesthetics; lip morphology and aesthetics research is receiving increasing attention. The advancement of research tools such as three-dimensional imaging technology has led to the clarification of lip morphologic and aesthetic characteristics. After studies of lip characteristics according to gender, ethnicity and age provided basic data, studies on lip aesthetics have been conducted by scholars worldwide. These studies could provide a basic theory to support diagnosis and treatment options, as well as the basis for evaluative criteria for precise treatment and technical improvements. According to the conclusions of the above studies, new ideas for cosmetic surgery design, including lip, perioral and labial-facial relationships, have been discovered.Level of Evidence V This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Influence of Glycosylation on Interfacial Properties of Recombinant Mucins: Adsorption, Surface Forces, and Friction.

Interfacial properties of two brush-with-anchor mucins, C-P55 and C-PSLex, have been investigated at the aqueous solution/poly(methyl methacrylate) (PMMA) interface. Both are recombinant mucin-type fusion proteins, produced by fusing the glycosylated mucin part of P-selectin glycoprotein ligand-1 (PSLG-1) to the Fc part of a mouse immunoglobulin in two different cells. They are mainly expressed as dimers upon production. Analysis of the O-glycans shows that the C-PSLex mucin has the longer and more branched side chains, but C-P55 has slightly higher sialic acid content. The adsorption of the mucins to PMMA surfaces was studied by quartz crystal microbalance with dissipation. The sensed mass, including the adsorbed mucin and water trapped in the layer, was found to be similar for these two mucin layers. Atomic force microscopy with colloidal probe was employed to study surface and friction forces between mucin-coated PMMA surfaces. Purely repulsive forces of steric origin were observed between mucin layers on compression, whereas a small adhesion was detected between both mucin layers on decompression. This was attributed to chain entanglement. The friction force between C-PSLex-coated PMMA is lower than that between C-P55-coated PMMA at low loads, but vice versa at high loads. We discuss our results in terms of the differences in the glycosylation composition of these two mucins.

Structure of DPPC-hyaluronan interfacial layers - effects of molecular weight and ion composition.

Hyaluronan and phospholipids play an important role in lubrication in articular joints and provide in combination with glycoproteins exceptionally low friction coefficients. We have investigated the structural organization of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) Langmuir layers at the solution-air interface at different length scales with respect to the adsorption of hyaluronan (HA). This allows us to assemble a comprehensive picture of the adsorption and the resulting structures, and how they are affected by the molecular weight of HA and the presence of calcium ions. Brewster angle microscopy and grazing incident diffraction were used to determine the lateral structure at the micro- and macro scale. The data reveals an influence of HA on both the macro and micro structure of the DPPC Langmuir layer, and that the strength of this effect increases with decreasing molecular weight of HA and in presence of calcium ions. Furthermore, from X-ray reflectivity measurements we conclude that HA adsorbs to the hydrophilic part of DPPC, but data also suggest that two types of interfacial structures are formed at the interface. We argue that hydrophobic forces and electrostatic interactions play important rules for the association between DPPC and HA. Surface pressure area isotherms were used to determine the influence of HA on the phase behavior of DPPC while electrophoretic mobility measurements were used to gain insight into the binding of calcium ions to DPPC vesicles and hyaluronan.

Ionic Surfactant Binding to pH-Responsive Polyelectrolyte Brush-Grafted Nanoparticles in Suspension and on Charged Surfaces.

The interactions between silica nanoparticles grafted with a brush of cationic poly(2-(dimethylamino) ethyl methacrylate) (SiO2-g-PDMAEMA) and anionic surfactant sodium dodecyl sulfate (SDS) is investigated by dynamic light scattering, electrophoretic mobility, quartz crystal microbalance with dissipation, ellipsometry, and atomic force microscopy. SiO2-g-PDMAEMA exhibits pH-dependent charge and size properties which enable the SDS binding to be probed over a range of electrostatic conditions and brush conformations. SDS monomers bind irreversibly to SiO2-g-PDMAEMA at low surfactant concentrations (∼10(-4) M) while exhibiting a pH-dependent threshold above which cooperative, partially reversible SDS binding occurs. At pH 5, SDS binding induces collapse of the highly charged and swollen brush as observed in the bulk by DLS and on surfaces by QCM-D. Similar experiments at pH 9 suggest that SDS binds to the periphery of the weakly charged and deswollen brush and produces SiO2-g-PDMAEMA/SDS complexes with a net negative charge. SiO2-g-PDMAEMA brush collapse and charge neutralization is further confirmed by colloidal probe AFM measurements, where reduced electrosteric repulsions and bridging adhesion are attributed to effects of the bound SDS. Additionally, sequential adsorption schemes with SDS and SiO2-g-PDMAEMA are used to enhance deposition relative to SiO2-g-PDMAEMA direct adsorption on silica. This work shows that the polyelectrolyte brush configuration responds in a more dramatic fashion to SDS than to pH-induced changes in ionization, and this can be exploited to manipulate the structure of adsorbed layers and the corresponding forces of compression and friction between opposing surfaces.

Tethered poly(2-isopropyl-2-oxazoline) chains: temperature effects on layer structure and interactions probed by AFM experiments and modeling.

Thermoresponsive polymer layers on silica surfaces have been obtained by utilizing electrostatically driven adsorption of a cationic-nonionic diblock copolymer. The cationic block provides strong anchoring to the surface for the nonionic block of poly(2-isopropyl-2-oxazoline), referred to as PIPOZ. The PIPOZ chain interacts favorably with water at low temperatures, but above 46 °C aqueous solutions of PIPOZ phase separate as water becomes a poor solvent for the polymer. We explore how a change in solvent condition affects interactions between such adsorbed layers and report temperature effects on both normal forces and friction forces. To gain further insight, we utilize self-consistent lattice mean-field theory to follow how changes in temperature affect the polymer segment density distributions and to calculate surface force curves. We find that with worsening of the solvent condition an attraction develops between the adsorbed PIPOZ layers, and this observation is in good agreement with predictions of the mean-field theory. The modeling also demonstrates that the segment density profile and the degree of chain interpenetration under a given load between two PIPOZ-coated surfaces rise significantly with increasing temperature.

Temperature-dependent adsorption and adsorption hysteresis of a thermoresponsive diblock copolymer.

A nonionic-cationic diblock copolymer, poly(2-isopropyl-2-oxazoline)60-b-poly((3-acrylamidopropyl)trimethylammonium chloride)17, (PIPOZ60-b-PAMPTMA17), was utilized to electrostatically tether temperature-responsive PIPOZ chains to silica surfaces by physisorption. The effects of polymer concentration, pH, and temperature on adsorption were investigated using quartz crystal microbalance with dissipation monitoring and ellipsometry. The combination of these two techniques allows thorough characterization of the adsorbed layer in terms of surface excess, thickness, and water content. The high affinity of the cationic PAMPTMA17 block to the negatively charged silica surface gives rise to a high affinity adsorption isotherm, leading to (nearly) irreversible adsorption with respect to dilution. An increase in solution pH lowers the affinity of PIPOZ to silica but enhances the adsorption of the cationic block due to increasing silica surface charge density, which leads to higher adsorption of the cationic diblock copolymer. Higher surface excess is also achieved at higher temperatures due to the worsening of the solvent quality of water for the PIPOZ block. Interestingly, a large hysteresis in adsorbed mass and other layer properties was observed when the temperature was cycled from 25 to 45 °C and then back to 25 °C. Possible causes for this temperature hysteresis are discussed.

Comparison of a brush-with-anchor and a train-of-brushes mucin on poly(methyl methacrylate) surfaces: adsorption, surface forces, and friction.

Interfacial properties of two types of mucins have been investigated at the aqueous solution/poly(methyl methacrylate) (PMMA) interface. One is commercially available bovine submaxillary mucin, BSM, which consists of alternating glycosylated and nonglycosylated regions. The other one is a recombinant mucin-type fusion protein, PSGL-1/mIgG2b, consisting of a glycosylated mucin part fused to the Fc part of an immunoglobulin. PSGL-1/mIgG2b is mainly expressed as a dimer upon production. A quartz crystal microbalance with dissipation was used to study the adsorption of the mucins to PMMA surfaces. The mass of the adsorbed mucin layers, including the adsorbed mucin and water trapped in the layer, was found to be significantly higher for PSGL-1/mIgG2b than for BSM. Atomic force microscopy with colloidal probe was employed to study interactions and frictional forces between mucin-coated PMMA surfaces. Purely repulsive forces of steric origin were observed between PSGL-1/mIgG2b mucin layers, whereas a small adhesion was detected between BSM layers and attributed to bridging. Both mucin layers reduced the friction force between PMMA surfaces in aqueous solution. The reduction was, however, significantly more pronounced for PSGL-1/mIgG2b. The effective friction coefficient between PSGL-1/mIgG2b-coated PMMA surfaces is as low as 0.02 at low loads, increasing to 0.24 at the highest load explored, 50 nN. In contrast, a friction coefficient of around 0.7 was obtained between BSM-coated PMMA surfaces. The large differences in interfacial properties for the two mucins are discussed in relation to their structural differences.

Nanoscale characterization of PEGylated phospholipid coatings formed by spray drying on silica microparticles.

Phospholipids constitute biocompatible and safe excipients for pulmonary drug delivery. They can retard the drug release and, when PEGylated, also prolong the residence time in the lung. The aim of this work was to assess the structure and coherence of phospholipid coatings formed by spray drying on hydrophilic surfaces (silica microparticles) on the nanoscale and, in particular, the effect of addition of PEGylated lipids thereon. Scanning electron microscopy showed the presence of nanoparticles of varying sizes on the microparticles with different PEGylated lipid concentrations. Atomic force microscopy confirmed the presence of a lipid coating on the spray-dried microparticles. It also revealed that the lipid-coated microparticles without PEGylated lipids had a rather homogenous coating whereas those with PEGylated lipids had a very heterogeneous coating with defects, which was corroborated by confocal laser scanning microscopy. All coated microparticles had good dispersibility without agglomerate formation, as indicated by particle size measurements. This study has demonstrated that coherent coatings of phospholipids on hydrophilic surfaces can be obtained by spray drying. However, the incorporation of PEGylated lipids in a one-step spray-drying process to prepare lipid coated microparticles with both controlled-release and stealth properties is very challenging.

Linking carrier morphology to the powder mechanics of adhesive mixtures for dry powder inhalers via a blend-state model.

The aim of this study was to investigate how the carrier morphology affects the expression of blend states in adhesive mixtures as a function of surface coverage ratio (SCR) and to identify where transitions between the different states occur. Adhesive mixtures of five lactose carriers with varying contents of lactose fines, corresponding to blends with different SCR ranging from 0 to 6, were produced by low-shear mixing. The powder mechanics of the mixtures were characterized by bulk density, compressibility and permeability. The appearance of the carriers and blends was studied by scanning electron microscopy, light microscopy and atomic force microscopy. The size and morphology of the carriers had a crucial impact on the evolution of the blend state, and affected the powder mechanical properties of the mixtures. It was found that smaller carriers with little or no surface irregularities were more sensitive to additions of fines resulting in self-agglomeration of fines at relatively low SCR values. On the contrary, carriers with irregular surface structures and larger sizes were able to reach higher SCR values before self-agglomeration of fines occurred. This could be attributed to an increased deagglomeration efficiency of irregular and larger carriers and to fines predominantly adhering to open pores.

Effect of solvent quality and chain density on normal and frictional forces between electrostatically anchored thermoresponsive diblock copolymer layers.

Equilibration in adsorbing polymer systems can be very slow, leading to different physical properties at a given condition depending on the pathway that was used to reach this state. Here we explore this phenomenon using a diblock copolymer consisting of a cationic anchor block and a thermoresponsive block of poly(2-isopropyl-2-oxazoline), PIPOZ. We find that at a given temperature different polymer chain densities at the silica surface are achieved depending on the previous temperature history. We explore how this affects surface and friction forces between such layers using the atomic force microscope colloidal probe technique. The surface forces are purely repulsive at temperatures <40°C. A local force minimum at short separation develops at 40°C and a strong attraction due to capillary condensation of a polymer-rich phase is observed close to the bulk phase separation temperature. The friction forces decrease in the cooling stage due to rehydration of the PIPOZ chain. A consequence of the adsorption hysteresis is that the friction forces measured at 25°C are significantly lower after exposure to a temperature of 40°C than prior to heating, which is due to higher polymer chain density on the surface after heating.

Lubrication synergy: Mixture of hyaluronan and dipalmitoylphosphatidylcholine (DPPC) vesicles.

Phospholipids and hyaluronan have been implied to fulfil important roles in synovial joint lubrication. Since both components are present in synovial fluid, self-assembly structures formed by them should also be present. We demonstrate by small angle X-ray scattering that hyaluronan associates with the outer shell of dipalmitoylphophatidylcholine (DPPC) vesicles in bulk solution. Further, we follow adsorption to silica from mixed hyaluronan/DPPC vesicle solution by Quartz Crystal Microbalance with Dissipation measurements. Atomic Force Microscope imaging visualises the adsorbed layer structure consisting of non-homogeneous phospholipid bilayer with hyaluronan/DPPC aggregates on top. The presence of these aggregates generates a long-range repulsive surface force as two such surfaces are brought together. However, the aggregates are easily deformed, partly rearranged into multilayer structures and partly removed from between the surfaces under high loads. These layers offer very low friction coefficient (<0.01), high load bearing capacity (≈23MPa), and self-healing ability. Surface bound DPPC/hyaluronan aggregates provide a means for accumulation of lubricating DPPC molecules on sliding surfaces.

Ru complexes containing pyridine dicarboxylate ligands: electronic effects on their catalytic activity toward water oxidation.

Two series of mononuclear ruthenium complexes [Ru(pdc)L3] (H2pdc = 2,6-pyridinedicarboxylic acid; L = 4-methoxypyridine, 1; pyridine, 2; pyrazine, 3) and [Ru(pdc)L2(dmso)] (dmso = dimethyl sulfoxide; L = 4-methoxypyridine, 4; pyridine, 5) were synthesized and spectroscopically characterized. Their catalytic activity toward water oxidation has been examined using Ce(IV) (Ce(NH4)2(NO3)6) as the chemical oxidant under acidic conditions. Complexes 1, 2 and 3 are capable of catalyzing Ce(IV)-driven water oxidation while 4 and 5 are not active. Electronic effects on their catalytic activity were illustrated: electron donating groups increase the catalytic activity.