Efficiency enhancement of ultrathin CIGS solar cells by optimal bandgap grading: erratum.

Typographical errors in a few equations in [Appl. Opt.58, 6067 (2019)APOPAI0003-693510.1364/AO.58.006067] are corrected.

Efficiency enhancement of ultrathin CIGS solar cells by optimal bandgap grading.

The power conversion efficiency of an ultrathin CuIn1-ξGaξSe2 (CIGS) solar cell was maximized using a coupled optoelectronic model to determine the optimal bandgap grading of the nonhomogeneous CIGS layer in the thickness direction. The bandgap of the CIGS layer was either sinusoidally or linearly graded, and the solar cell was modeled to have a metallic backreflector corrugated periodically along a fixed direction in the plane. The model predicts that specially tailored bandgap grading can significantly improve the efficiency, with much smaller improvements due to the periodic corrugations. An efficiency of 27.7% with the conventional 2200-nm-thick CIGS layer is predicted with sinusoidal bandgap grading, in comparison to 22% efficiency obtained experimentally with homogeneous bandgap. Furthermore, the inclusion of sinusoidal grading increases the predicted efficiency to 22.89% with just a 600-nm-thick CIGS layer. These high efficiencies arise due to a large electron-hole pair generation rate in the narrow-bandgap regions and the elevation of the open-circuit voltage due to a wider bandgap in the region toward the front surface of the CIGS layer. Thus, bandgap nonhomogeneity, in conjunction with periodic corrugation of the backreflector, can be effective in realizing ultrathin CIGS solar cells that can help overcome the scarcity of indium.

Cancer among American Indians - Identifying Priority Areas in Oklahoma.

BACKGROUND: We describe and compare cancer incidence and mortality among American Indians (AI/ANs) and whites in nine Indian Health Service (IHS) Service Units in Oklahoma. METHODS: Using data from the Oklahoma Central Cancer Registry and the web-based OK2SHARE database, we obtained age-adjusted cancer incidence rates from 1997 to 2012 and cancer mortality rates from 1999 to 2009 for AI/ANs and whites in Oklahoma. We examined differences in primary site, percentage of late stage diagnoses, and trends over time. RESULTS: AI/ANs consistently had higher cancer incidence and mortality compared to whites in Oklahoma. The magnitude of disparity for cancer incidence and mortality varied by IHS Service Unit and by gender. The top three cancer sites were the same for all Service Units. The percentage of late stage diagnosis also varied by region. CONCLUSIONS: We identify priority areas where cancer disparity challenges exist among AI/ANs in Oklahoma.

Cancer incidence and staging among American Indians in Oklahoma.

BACKGROUND: This study describes overall and site specific cancer incidence among AI/ANs compared to whites in Oklahoma and differences in cancer staging. METHODS: Age-adjusted incidence rates obtained from the Oklahoma Central Cancer Registry are presented for all cancer sites combined and for the most common cancer sites among AI/ANs with comparisons to whites. Percentages of late stage cancers for breast, colorectal, and melanoma cancers are also presented. RESULTS: AI/ANs had a significantly higher overall cancer incidence rate compared to whites (629.8/100,000 vs. 503.3/100,000), with a rate ratio of 1.25 (95% CI: 1.22, 1.28). There was a significant disparity in the percentage of late stage melanoma cancers between 2005 and 2009, with 14.0% late stage melanoma for whites and 20.0% for AI/ANs (p-value:0.03). CONCLUSIONS: Overall, there were cancer disparities between AI/ANs and whites in Oklahoma. Incidence rates were higher among AI/ANs for all cancers and many site specific cancers.

Toward a cylindrical cloak via inverse homogenization.

An effective cylindrical cloak may be conceptualized as an assembly of adjacent local neighborhoods, each of which is made from a homogenized composite material (HCM). The HCM is required to be a certain uniaxial dielectric-magnetic material, characterized by positive-definite constitutive dyadics. It can arise from the homogenization of component materials that are remarkably simple in terms of their structure and constitutive relations. For example, the components can be two isotropic dielectric-magnetic materials, randomly distributed as oriented spheroidal particles. By carefully controlling the spheroidal shape of the component particles, a high degree of HCM anisotropy may be achieved which is necessary for the cloaking effect to be realized. The inverse Bruggeman formalism can provide estimates of the shape and constitutive parameters for the component materials, as well as their volume fractions.

Supramolecular chemistry of monochiral naphthalenediimides.

Three new N-desymmetrised naphthalenediimides (NDIs) are described, each containing one chiral and one achiral centre. The ability of such 'monochiral' NDIs to self-assemble into hydrogen-bonded helical nanotubes, to act as a sergeant in a 'sergeants-and-soldiers' system and to form a hexameric receptor for C(70) was examined. Small differences at the achiral centre were found to have significant effects on the supramolecular properties of the NDI. All three new NDIs form nanotubes that bind C(60), but with different efficiencies, and one is a better sergeant than any of the dichiral NDIs investigated to date.

Implant, performance, and retrieval of an atrial leadless pacemaker in sheep.

BACKGROUND: Medtronic is developing an atrial Micra Transcatheter Pacing System (Medtronic, Minneapolis, Minnesota) and associated retrieval system. OBJECTIVE: The purpose of this study was to evaluate chronic atrial Micra retrieval, reimplantation, and chronic pacing performance. METHODS: Sheep were implanted in 2 groups: group 1 (n = 6) for 6 months, a second device implanted, and first retrieved and studied for an additional 6 months; group 2 (n = 6) for 6 months, devices were retrieved, and a second device implanted and observed acutely. Both groups underwent histopathological evaluation. Pacing capture thresholds (PCTs), p wave amplitude, and pacing impedances were measured chronically. Device retrieval times were recorded, and intracardiac echocardiography was used. RESULTS: At 24 weeks, PCTs for group 1 were low and stable for both the first device (0.55 ± 0.14 V) and the second device (0.57 ± 0.09 V), in which the average retrieval time was 17:35 minutes. For group 2, the average retrieval time was 6:12 minutes, chronic PCTs in the first device were 0.53 ± 0.11 V, and acute PCTs for the second device were 0.71 ± 0.19 V. Pathological findings were within an expected range of tissue responses for similar Micra acute and chronic implants and device retrievals. p waves and impedances were stable and within an expected range for implant site and electrode design. Complications included 1 early dislodgment and 1 death attributed to a prototype retrieval tool. CONCLUSION: In an animal model, an atrial Micra can be easily implanted with excellent chronic pacing performance and is easily retrievable at 6 months. A second device can successfully be implanted with low, chronic stable thresholds. A developed prototype retrieval tool was easy to use and, with modifications, complication free.

The sergeants-and-soldiers effect: chiral amplification in naphthalenediimide nanotubes.

Self-assembling naphthalenediimide (NDI)-based helical organic nanotubes display sergeants-and-soldiers behaviour, chiral monomers imposing a supramolecular structure upon achiral monomers. Several achiral NDI monomers were synthesised and their ability to incorporate into supramolecular nanotubes was studied. Nanotubes containing predominantly the most effective soldier, derived from 1-aminocyclopropane-carboxylic acid, are effective hosts for C(60).

3D angle-independent Doppler and speckle tracking for the myocardium and blood flow

A technology based on velocity ratio indices is described for application in the myocardium. Angle-independent Doppler indices, such as the pulsatility index, which employ velocity ratios, can be measured even if the ultrasound beam vector at the moving target and the motion vector are not in a known plane. The unknown plane situation is often encountered when an ultrasound beam interrogates sites in the myocardium. The velocities employed in an index calculation must be close to the same or opposite directions. The Doppler velocity ratio indices are independent of angle in 3D space as are ratio indices based on 1D strain and 1D speckle tracking. Angle-independent results with spectral Doppler methods are discussed. Possible future imaging techniques based on velocity ratios are presented. By using indices that involve ratios, several other sources of error cancel in addition to that of angular dependence for example errors due to less than optimum gain settings and beam distortion. This makes the indices reliable as research or clinical tools. Ratio techniques can be readily implemented with current commercial blood flow pulsed wave duplex Doppler equipment or with pulsed wave tissue Doppler equipment. In 70 patients where the quality of the real-time B-mode looked suitable for the Doppler velocity ratio technique, there was only one case where clear spectra could not be obtained for both the LV wall and the septum. A reproducibility study of spectra from the septum of the heart shows a 12% difference in velocity ratios in the repeat measurements.

Resolving Ultrasound Contrast Microbubbles Using Minimum Variance Beamforming.

Minimum Variance (MV) beamforming is known to improve the lateral resolution of ultrasound images and enhance the separation of isolated point scatterers. This paper aims to evaluate the adaptive beamformer's performance with flowing microbubbles (MBs) which are relevant to super-resolution ultrasound imaging. Simulations using point scatterer data from single emissions were complemented by an experimental investigation performed using a capillary tube phantom and the Synthetic Aperture Real-time Ultrasound System (SARUS). The MV performance was assessed by the minimum distance that allows the display of two scatterers positioned side-by-side, the lateral Full-Width-at-Half-Maximum (FWHM), and the Peak-Sidelobe-Level (PSL). In the tube, scatterer responses separated by down to [Formula: see text] (or 1.05λ ) were distinguished by the MV method, while the standard Delay-And-Sum (DAS) beamformers were unable to achieve such separation. Up to ninefold FWHM decrease was also measured in favor of the MV beamformer for individual echoes from MBs. The lateral distance between two scatterers impacted on their FWHM value, and additional differences in the scatterers' axial or out-of-plane position also impacted on their size and appearance. The simulation and experimental results were in agreement in terms of lateral resolution. The point scatterer study showed that the proposed MV imaging scheme provided clear resolution benefits compared to DAS. Current super-resolution methods mainly depend on DAS beamformers. Instead, the use of the MV method may provide a larger number of detected, and potentially better localized, MB scatterers.

Attenuation Coefficients of the Individual Components of the International Electrotechnical Commission Agar Tissue-Mimicking Material.

Tissue-mimicking materials (TMMs) are widely used in quality assurance (QA) phantoms to assess the performance of ultrasound scanners. The International Electrotechnical Commission (IEC) defines the acoustic parameters of up to 10MHz. To manufacture a TMM that closely mimics the acoustical properties of small animal soft tissue at high frequencies, the acoustic properties of each of the individual component ingredients used in the IEC agar-TMM recipe need to be quantified. This study was aimed at evaluating whether the overall attenuation coefficient of the IEC agar-TMM is the linear sum of the attenuation coefficients of each of its ingredients. Eight batches of agar-based materials were manufactured with different combinations of ingredients from the IEC agar-TMM recipe. The percentage concentration of each ingredient used in the individual mixes was identical to that specified in the IEC recipe. The attenuation of each of these batches was measured over the ultrasound frequency range 12-50MHz, and the attenuation value of the agar component was subtracted from the attenuation values of the other batches. Batch attenuation values, representing the attenuation of individual components within the IEC agar-TMM, were then summated and yielded attenuation values that accurately reproduced the attenuation of the IEC agar-TMM. This information forms a valuable resource for the future development of TMMs with acoustic properties similar to those of soft tissue at high frequencies.

Super-Resolution Axial Localization of Ultrasound Scatter Using Multi-Focal Imaging.

OBJECTIVE: This paper aims to develop a method for achieving micrometre axial scatterer localization for medical ultrasound, surpassing the inherent, pulse length dependence limiting ultrasound imaging. METHODS: The method, directly translated from cellular microscopy, is based on multi-focal imaging and the simple, aberration-dependent, image sharpness metric of a single point scatterer. The localization of a point scatterer relies on the generation of multiple overlapping sharpness curves, created by deploying three foci during receive processing, and by assessing the sharpness values after each acquisition as a function of depth. Each derived curve peaks around the receive focus and the unique position of the scatterer is identified by combining the data from all curves using a maximum likelihood algorithm with a calibration standard. RESULTS: Simulated and experimental ultrasound point scatter data show that the sharpness method can provide scatterer axial localization with an average accuracy down to 10.21 m ( 21) and with up to 11.4 times increased precision compared to conventional localization. The improvements depend on the rate of change of sharpness using each focus, and the signal to noise ratio in each image. CONCLUSION: Super-resolution axial imaging from optical microscopy has been successfully translated into ultrasound imaging by using raw ultrasound data and standard beamforming. SIGNIFICANCE: The normalized sharpness method has the potential to be used in scatterer localization applications and contribute in current super-resolution ultrasound imaging techniques.

Acoustic Properties of Small Animal Soft Tissue in the Frequency Range 12-32 MHz.

Quality assurance phantoms are made of tissue-mimicking materials (TMMs) the acoustic properties of which mimic those of soft tissue. However, the acoustic properties of many soft tissue types have not been measured at ultrasonic frequencies >9 MHz. With the increasing use of high-frequency ultrasound for both clinical and pre-clinical applications, it is of increasing interest to ensure that TMMs accurately reflect the acoustic properties of soft tissue at these higher frequencies. In this study, the acoustic properties of ex vivo brain, liver and kidney samples from 50 mice were assessed in the frequency range 12-32 MHz. Measurements were performed within 6 min of euthanasia in a phosphate-buffered saline solution maintained at 37.2 ± 0.2 °C. The measured mean values for the speed of sound for all organs were found to be higher than the International Electrotechnical Commission guideline recommended value for TMMs. The attenuation coefficients measured for brain, liver and kidney samples were compared with the results of previous studies at lower frequencies. Only the measured kidney attenuation coefficient was found to be in good agreement with the International Electrotechnical Commission guideline. The information provided in this study can be used as a baseline on which to manufacture a TMM suitable for high-frequency applications.

Study of selected birth defects among American Indian/Alaska Native population: A multi-state population-based retrospective study, 1999-2007.

BACKGROUND: Higher prevalence of selected birth defects has been reported among American Indian/Alaska Native (AI/AN) newborns. We examine whether known risk factors for birth defects explain the higher prevalence observed for selected birth defects among this population. METHODS: Data from 12 population-based birth defects surveillance systems, covering a birth population of 11 million from 1999 to 2007, were used to examine prevalence of birth defects that have previously been reported to have elevated prevalence among AI/ANs. Prevalence ratios (PRs) were calculated for non-Hispanic AI/ANs and any AI/ANs (regardless of Hispanic ethnicity), adjusting for maternal age, education, diabetes, and smoking, as well as type of case-finding ascertainment surveillance system. RESULTS: After adjustment, the birth prevalence of two of seven birth defects remained significantly elevated among AI/ANs compared to non-Hispanic whites (NHWs): anotia/microtia was almost threefold higher, and cleft lip +/- cleft palate was almost 70% higher compared to NHWs. Excluding AI/AN subjects who were also Hispanic had only a negligible impact on adjusted PRs. CONCLUSIONS: Additional covariates accounted for some of the elevated birth defect prevalences among AI/ANs compared to NHWs. Exclusion of Hispanic ethnicity from the AI/AN category had little impact on birth defects prevalences in AI/ANs. NHWs serve as a viable comparison group for analysis. Birth defects among AI/ANs require additional scrutiny to identify modifiable risk and protective factors.

Error analysis of ultrasonic tissue doppler velocity estimation techniques for quantification of velocity and strain.

Recent work in the field of Doppler tissue imaging has focused mainly on the quantification of results involving the use of techniques of strain and strain-rate imaging. These results are based on measuring a velocity gradient between two points, a known distance apart, in the region-of-interest. Although many recent publications have demonstrated the potential of this technique in clinical terms, the method still suffers from low repeatability. The work presented here demonstrates, through the use of a rotating phantom arrangement and a custom developed single element ultrasound system, that this is a consequence of the fundamental accuracy of the technique used to estimate the original velocities. Results are presented comparing the performance of the conventional Kasai autocorrelation velocity estimator with those obtained using time domain cross-correlation and the complex cross-correlation model based estimator. The results demonstrate that the complex cross-correlation model based technique is able to offer lower standard deviations of the velocity gradient estimations compared with the Kasai algorithm.

Small Rodent Cardiac Phantom for Preclinical Ultrasound Imaging.

Imaging phantoms play a valuable role in the quality control and quality assurance of medical imaging systems. However, for use in the relatively new field of small-animal preclinical imaging, very few have been described in the literature, and even less or none at all are available commercially. Yet, preclinical small animal phantoms offer the possibility of reducing the need for live animals for test and measurement purposes. Human scale cardiac phantoms, both reported in the literature and available commercially, are typically complex devices. Their designs include numerous flow control valves, pumps, and servo motors. These devices are coupled to tissue mimicking materials (TMMs) shaped to replicate the form of cardiac chambers and valves. They are then operated in such a way as to cause the replica TMM heart to move in a lifelike manner. This paper describes the design and construction of a small rodent preclinical cardiac phantom, which is both of a simple design and construction. Using only readily available materials and components, it can be manufactured without the use of workshop facilities, using only hand-tools. Drawings and pictures of the design are presented along with images of the phantom in operation, using a high-frequency preclinical ultrasound scanner.

Experimental performance assessment of the sub-band minimum variance beamformer for ultrasound imaging.

Recent progress in adaptive beamforming techniques for medical ultrasound has shown that current resolution limits can be surpassed. One method of obtaining improved lateral resolution is the Minimum Variance (MV) beamformer. The frequency domain implementation of this method effectively divides the broadband ultrasound signals into sub-bands (MVS) to conform with the narrow-band assumption of the original MV theory. This approach is investigated here using experimental Synthetic Aperture (SA) data from wire and cyst phantoms. A 7MHz linear array transducer is used with the SARUS experimental ultrasound scanner for the data acquisition. The lateral resolution and the contrast obtained, are evaluated and compared with those from the conventional Delay-and-Sum (DAS) beamformer and the MV temporal implementation (MVT). From the wire phantom the Full-Width-at-Half-Maximum (FWHM) measured at a depth of 52mm, is 16.7µm (0.08λ) for both MV methods, while the corresponding values for the DAS case are at least 24 times higher. The measured Peak-Side-lobe-Level (PSL) may reach -41dB using the MVS approach, while the values from the DAS and MVT beamforming are above -24dB and -33dB, respectively. From the cyst phantom, the power ratio (PR), the contrast-to-noise ratio (CNR), and the speckle signal-to-noise ratio (sSNR) measured at a depth of 30mm are at best similar for MVS and DAS, with values ranging between -29dB and -30dB, 1.94 and 2.05, and 2.16 and 2.27 respectively. In conclusion the MVS beamformer is not suitable for imaging continuous targets, and significant resolution gains were obtained only for isolated targets.

Dynamic Enhancement of B-Mode Cardiac Ultrasound Image Sequences.

Limited contrast, along with speckle and acoustic noise, can reduce the diagnostic value of echocardiographic images. This study introduces dynamic histogram-based intensity mapping (DHBIM), a novel approach employing temporal variations in the cumulative histograms of cardiac ultrasound images to contrast enhance the imaged structures. DHBIM is then combined with spatial compounding to compensate for noise and speckle. The proposed techniques are quantitatively assessed (32 clinical data sets) employing (i) standard image quality measures and (ii) the repeatability of routine clinical measurements, such as chamber diameter and wall thickness. DHBIM introduces a mean increase of 120.9% in tissue/chamber detectability, improving the overall repeatability of clinical measurements by 17%. The integrated approach of DHBIM followed by spatial compounding provides the best overall enhancement of image quality and diagnostic value, consistently outperforming the individual approaches and achieving a 401.4% average increase in tissue/chamber detectability with an associated 24.3% improvement in the overall repeatability of clinical measurements.

Broadband Acoustic Measurement of an Agar-Based Tissue-Mimicking-Material: A Longitudinal Study.

Commercially available ultrasound quality assurance test phantoms rely on the long-term acoustic stability of the tissue-mimicking-material (TMM). Measurement of the acoustic properties of the TMM can be technically challenging, and it is important to ensure its stability. The standard technique is to film-wrap samples of TMM and to measure the acoustic properties in a water bath. In this study, a modified technique was proposed whereby the samples of TMM are measured in a preserving fluid that is intended to maintain their characteristics. The acoustic properties were evaluated using a broadband pulse-echo substitution technique over the frequency range 4.5-50 MHz at 0, 6 and 12 months using both techniques. For both techniques, the measured mean values for the speed of sound and attenuation were very similar and within the International Electrotechnical Commission-recommended value. However, the results obtained using the proposed modified technique exhibited greater stability over the 1-y period compared with the results acquired using the standard technique.

B-mode compound imaging in mice.

Cross-sectional B-mode images were obtained from a dead mouse for a 360 degrees scan around the mouse using a 12-MHz linear array. For each cross-section, a set of aligned images was obtained after rotation about the isocenter, which were added to produce a single compound image. The compound images demonstrated a substantial improvement over single B-mode images, with uniform image quality, low noise and improved visualization of structures. This technique may be of interest in forming the basis for a new 3-D in vivo technique in the abdomen and pelvic regions, providing high-quality ultrasound images that are not dependent on operator skill. A further development worth pursuing for improved spatial resolution is reconstruction-based tomography.