Reconstruction after Pelvic Bone Massive Resection: Evolution and Actuality of 3D-Printing Technology.

PURPOSE OF THE STUDY: Pelvic reconstructions after massive bone resections are among the most challenging practices in orthopedic surgery. Whether the bone gap results after a trauma, a tumor resection, or it is due to a prosthetic revision, it is mandatory to reconstruct pelvic bone continuity and rebuild the functional thread that connects spine and hip joint. Several different approaches have been described in literature through the decades to achieve those goals. MATERIAL AND METHODS: To this date, 3D-printed implants represent one of the most promising surgical technologies in orthopedic oncology and complex reconstructive surgery. We present our experience with 3D-printed custom-made pelvic prostheses to fulfi ll bone gaps resulting from massive bone loss due to tumor resections. We retrospectively evaluated 17 cases treated with pelvic bone reconstruction using 3D-printed prostheses. Cases were evaluated in terms of both oncological and functional outcomes. RESULTS: At the last follow-up, local complications were found in 6 cases (36%): in 4 (23.5%) of them the cause was a local recurrence of the disease, whereas only 2 (12.5%) had non-oncologic issues. The mean MSTS score in our population increased from 8.2 before surgery to 22.3 at the latest clinical control after surgery. DISCUSSION: 3D-printing technology, used to produce cutting jigs and prosthetic implants, can lead to good clinical and functional outcomes. These encouraging results are comparable with the ones obtained with other more frequently used reconstructive approaches and support custom-made implants as a promising reconstructive approach. CONCLUSIONS: Our data confi rm 3D-printing and custom-made implants as promising technologies that could shape the next future of orthopedic oncology and reconstructive surgery. KEY WORDS: custom made prosthesis, pelvic reconstruction, orthopedic oncology, cutting jigs, 3D-printing.

Giant cell tumor of extremities, surgical treatment and local adjuvants: which is the most effective?

Giant cell tumour (GCT) represents 5% of all primitive bone tumours. Standard surgical treatment of GCT includes intralesional excision or segmental resection. Curettage has a higher recurrence rate (10-25% in stage 2 or 3 but does preserve adjacent joint function. The use of local adjuvants such as phenol, alcohol, H2O2, Argon or cement may decrease recurrence rate, yet which local adjuvant works best is still, to this day, controversial. A series of 109 patients with GCT of the extremity, surgical treated in a single Institution from 2016 to 2018, were analysed in a retrospective study. The purpose of our study was to report the incidence of recurrence rate in patients with GCT of limbs treated in a single institution with different local adjuvants. The results of the present study suggests that curettage in association to cryoablation seems to reduce the recurrence rate compared to "classic" local adjuvants.

Total hip replacement: a retrospective multicentric analysis on re-intervention rate after single component revision.

Total hip arthroplasty (THA) revision is a procedure consisting in the replacement of a single or multiple implant components and could take place once or more times (re-revision). The aim of this multicentre study is to evaluate the benefits of single component revision in respect of the principles that define implant stability. Two hundred and forty-two patients underwent THA revision at Orthopaedic Clinic of Pisa and Versilia (ITA) from January 2007 to December 2016. We have systematically excluded revisions due to septic or traumatic prosthesis loosening, revisions of both implant components (cotyle and stem) and replacement alone. To evaluate implant stability, we used preoperative X ray and intra-operative mechanical stress tests, applying accredited criteria. Two hundred and twenty-six patients (93%) underwent a single procedure of THA revision: 193 had cotyle replacement and 33 had femoral stem replacement. The remaining 16 (7 %) underwent at least two procedures: 10 of them had consecutive failure of the same component, while the other 6 had revision of the other component after the first procedure. Considering our cases series, we can assert that single component revision is the best choice when no signs of loosening are present on the remaining component. Nevertheless, an accurate evaluation with unanimous radiological criteria and intraoperative testing is essential for the surgeon to choose the most suitable treatment.

Light scattering properties of self-organized nanostructured substrates for thin-film solar cells.

We investigate the scattering properties of novel kinds of nano-textured substrates, fabricated in a self-organized fashion by defocused ion beam sputtering. These substrates provide strong and broadband scattering of light and can be useful for applications in thin-film solar cells. In particular, we characterize the transmitted light in terms of haze and angle-resolved scattering, and we compare our results with those obtained for the commonly employed Asahi-U texture. The results indicate that the novel substrate has better scattering properties compared to reference Asahi-U substrates. We observe super-Lambertian light scattering behavior in selected spectral and angular regions due to the peculiar morphology of the nano-textured interface, which combines high aspect ratio pseudo random structures with a one-dimensional periodic pattern. The enhancement of light absorption observed in a prototype thin film semiconductor absorber grown on nano-textured glass with respect to an Asahi-U substrate further confirms the superior light trapping properties of the novel substrate.

Polymethylmethacrylate-augmented fenestreted pedicle-screw fixation in low bone quality patients: a case series and literature review.

The use of pedicle screws in low bone quality patients implicates risks of secondary implant loosening for grip lack. In fact, the result is a reduced mechanical stability at bone-screw interface and consequently an increased chance of pullout and hardware failure. Augmentation techniques have been described for many years and fenestrated screws that allow cement injection is one of them. This is a retrospective observational study of patients treated at our department with polymethylmethacrylate- (PMMA) augmented fenestrated screws. Indications for posterior instrumentation were traumatic fracture in osteoporotic spine, oncological disease, post-traumatic deformity, degenerative disease, revision surgery and sickle cell disease fractures. Implant stability was evaluated with X-Rays and CT scan performed 3 days after surgery and every 3 months during the follow-up. Accuracy of screw placement was evaluated with Heary classification. Fifty-three surgical treatments in 52 patients were performed and 247 PMMA augmented fenestrated screws were placed. According to the Heary classification, 96.21% resulted Grade I, 1.8% Grade II, 2% Grade IV. A total of 17 complications occurred. Fenestrated screw augmentation should be performed in selected patients in whom the bone quality is insufficient to guarantee implant stability. These screws may result useful in complex cases as revision surgeries, osteoporosis and tumour affections where bone quality is highly compromised.

Cryotherapy efficacy and safety as local therapy in surgical treatment of musculoskeletal tumours. A retrospective case series of 143 patients.

Cryotherapy, also called Cryoablation (CA), is a technique that provides a local treatment to various pathological conditions. In Musculoskeletal tumours management, Cryoablation is well accepted and validated as a treatment in palliative cures for metastatic patients. Recently, CA has been proposed also as an alternative to radiofrequency ablation in osteoid osteoma and other benign tumour treatment with promising results. Cryotherapy with argon ice-balls as local adjuvant in open surgery is a tool that can provide enlargement of surgical margins if used properly. There is still not enough evidence supporting use of cryotherapy as local adjuvant in Musculoskeletal open surgery as the series cited above are very small and there is no comparative RCT between local adjuvant therapies including CA. One-hundred-and-eighty-three patients were treated with Cryoablation from 2000 and 2018 in the Musculoskeletal Tumours Surgery Unit of Careggi (Florence) and the University 2nd Clinic of Pisa. In our study group, 38 patients (26.6%) were affected by bone metastasis, 16 patients (11.1%) by aneurismal bone cysts or angiomas, 22 patients (15.4%) by low-grade malignant musculoskeletal tumours, 2 patients (1,4%) by fibromatosis, 63 patients (44.1%) by benign musculoskeletal tumours (principally Giant Cell Tumours-GCT) and 2 patients (1.4%) by Osteosarcomas. In 125 cases (87.4%), CA has been used as an adjuvant therapy, in 12 cases (8.4%) as a percutaneous ablation therapy and in 6 cases (4.2%) as adjuvant to remove tumoral lesions 'en bloc' or as a 'poor technique' for its sterilizing effect on previously resected bones. Mean follow-up was 10 years. Twenty-three patients (16%) were classified as Alive with Disease (AWD) due to local recurrence or tumour progression (14 metastases, 5 low-grade malignant bone tumours, 4 Giant Cell Tumours). Eight patients died due to the disease (6 metastases, 2 osteosarcomas), while 1 died from leukaemia. One-hundred-and-eleven patients (78%) were classified as Continues Disease Free (CDF). All patients reported decrease in pain-related symptoms after surgery and all surgeons reported better control of blood loss. Three cases (2%) of local skin necrosis or wound dehiscence were reported. No local recurrences were reported after fibromatosis ablation. Our results confirm that CA could be considered as a safe and effective technique to treat various conditions as adjuvant and palliative therapy. In particular, in open surgery, cryotherapy as an adjuvant treatment could lead to very low rates of recurrence in locally aggressive tumours like Giant Cell Tumours. These results could be generalized but a better understanding about indications and outcomes can be reached studying CA in specific populations with comparation to other adjuvant techniques.

Complications and survival of megaprostheses after resection of bone metastases.

Treatment of bone metastases is often palliative, aiming at pain control and stabilization or prevention of pathological fractures. However, a complete resection with healing purposes can be performed in selected cases. The aim of our work was to evaluate the survival of megaprostheses used for reconstruction after bone metastases. Between January 2001 and March 2015, we implanted 169 Megasystem-C® (Waldemar LINK® GmbH & Co. KG, Hamburg, Germany) after bone metastasis resection. Patients, 95 females and 74 males, were operated at an average age of 61 (12-87) years for proximal femoral resection in 135 (79.9%) cases, distal femur in 24 (14.2%), proximal tibia in 6 (3.6%), total femur in 3 (1.8%) and intercalary femur in 1 (0.6%). Mostly, breast cancer metastases (30.8%), kidney (17.8%) and lung (14.2%) were treated. At an average follow-up of 21 (1-150) months, we found a 99.4% overall limb salvage and a 96.1% overall survival rate at 1 year, 92.8% at 2 years, and 86.8% at 5 and 10 years. We found 9 (5.3%) mobilization cases of the proximal femoral implant, 3 needed surgical reduction; 2 (1.2%) cases of aseptic loosening of the prosthetic stem; 2 (1.2%) periprotetic infection cases, one requiring a 2-stage revision. Few literature studies have evaluated the survival of megaprosthetic implant in the treatment of bone metastases. Our data show how in this specific context the rate of complications is significantly lower than expected in general orthopedic orthopedic surgery. The use of modular prostheses is a valid reconstructive strategy after bone metastasis resection in selected patients. The rate of short-term complications is exceptionally low; further studies will have to confirm this in the longer term.

Topical Application of Vancomycin Powder to Prevent Infections after Massive Bone Resection and the implantation of Megaprostheses in Orthopaedic Oncology Surgery.

Introduction: Periprosthetic joint infection (PJI) represents a serious burden in orthopaedic oncology. Through the years, several local expedients have been proposed to minimise the risk of periprosthetic infection. In this study, we report our outcomes using topical vancomycin powder (VP) with the aim to prevent PJIs. Materials and methods: Fifty oncological cases treated with massive bone resection and the implant of a megaprosthesis were included in our study. Among them, 22 [(GGroup A) received one gram of vancomycin powder on the surface of the implant and another gram on the surface of the muscular fascia]. The remaining 28 did not receive such a treatment (Group B). The rest of surgical procedures and the follow-up were the same for the two groups. Patients underwent periodical outpatient visits, radiographs and blood exams' evaluations. Diagnosis of PJIs and adverse reactions to topical vancomycin were recorded. Results: None of the cases treated with topical vancomycin developed infections, whereas 6 of the 28 cases (21.4%) who did not receive the powder suffered from PJIs. These outcomes suggest that cases treated with VP had a significantly lower risk of post-operative PJI (p=0.028). None of our cases developed acute kidney failures or any other complication directly or indirectly attributable to the local administration of VP. Conclusions: The topical use of vancomycin powder on megaprosthetic surfaces and the overlying fascias, alongside with a correct endovenous antibiotic prophylaxis, can represent a promising approach in order to minimise the risk of periprosthetic infections in orthopaedic oncology surgery.

Enhanced 1.54 µm emission in Y-Er disilicate thin films on silicon photonic crystal cavities.

We introduce an Y-Er disilicate thin film deposited on top of a silicon photonic crystal cavity as a gain medium for active silicon photonic devices. Using photoluminescence analysis, we demonstrate that Er luminescence at 1.54 µm is enhanced by coupling with the cavity modes, and that the directionality of the Er optical emission can be controlled through far-field optimization of the cavity. We determine the maximum excitation power that can be coupled into the cavity to be 12 mW, which is limited by free carrier absorption and thermal heating. At maximum excitation, we observe that nearly 30% of the Er population is in the excited state, as estimated from the direct measurement of the emitted power. Finally, using time-resolved photoluminescence measurements, we determine a value of 2.3 for the Purcell factor of the system at room temperature. These results indicate that overcoating a silicon photonic nanostructure with an Er-rich dielectric layer is a promising method for achieving light emission at 1.54 µm wavelength on a silicon platform.

Clinical and radiographical outcome after surgical treatment of periprosthetic type B proximal femur fractures: a retrospective study.

PURPOSE: Periprosthetic fractures after hip prosthesis represent a constantly increasing clinical problem and a challenging complication to treat surgically. Among these, type B proximal femur fractures should be diagnosed correctly to be treated surgically. The aim of this study was to re-evaluate the type of surgical treatment of periprosthetic fractures. METHODS: We examined the cases treated between January 2012 and February 2018, classifying them according to the U.C.S. AO/OTA. We evaluated the radiographic outcome according to the Beals and Tower criteria. Patients still alive were also re-evaluated according to the H.H.S. and the WOMAC score. RESULTS: We treated 48 patients (12 men, 35 women, average age 81 years), divided into 24 type B1, 14 type B2 and 10 type B3 fractures. The overall consolidation rate was 95.4%, while the major complication (implant dislocation, pseudoarthrosis and deep infection) rate was 12.5%. Clinically, it was possible to reassess 34 patients with a mean follow-up of 38.4 months, an average HHS of 75.89 and a mean WOMAC score of 79.93. CONCLUSIONS: Periprosthetic type B fractures are difficult to manage and require careful preoperative planning and appropriate intraoperative management. However, the overall clinical and radiographic result was satisfactory, although patients should still be aware of the risk of complications associated with this type of fracture.

Augmented Reality as a Tool to Guide Patient-Specific Templates Placement in Pelvic Resections.

Patient-specific templates (PST) have become a useful tool for guiding osteotomy in complex surgical scenarios such as pelvic resections. The design of the surgical template results in sharper, less jagged resection margins than freehand cuts. However, their correct placement can become difficult in some anatomical regions and cannot be verified during surgery. Conventionally, pelvic resections are performed using Computer Assisted Surgery (CAS), and in recent years Augmented Reality (AR) has been proposed in the literature as an additional tool to support PST placement. This work presents an AR task to simplify and improve the accuracy of the positioning of the template by displaying virtual content. The focus of the work is the creation of the virtual guides displayed during the AR task. The system was validated on a patient-specific phantom designed to provide a realistic setup. Encouraging results have been achieved. The use of the AR simplifies the surgical task and optimizes the correct positioning of the cutting template: an average error of 2.19 mm has been obtained, lower than obtained with state-of-the-art solutions. In addition, supporting PST placement through AR guidance is less time-consuming than the standard procedure that solely relies on anatomical landmarks as reference.

Planar photonic crystal cavities with far-field optimization for high coupling efficiency and quality factor.

Different types of planar photonic crystal cavities aimed at optimizing the far-field emission pattern are designed and experimentally assessed by resonant scattering measurements. We systematically investigate the interplay between achieving the highest possible quality (Q) factor and maximizing the in- and out-coupling efficiency into a narrow emission cone. Cavities operate at telecommunications wavelengths, i.e. around approximately 1.55 microm, and are realized in silicon membranes. A strong modification of the far-field emission pattern, and therefore a substantial increase of the coupling efficiency in the vertical direction, is obtained by properly modifying the holes around L3, L5 and L7 type PhC cavities, as we predict theoretically and show experimentally. An optimal compromise yielding simultaneously a high Q-factor and a large coupling to the fundamental cavity mode is found for a L7-type cavity with a measured Q congruent with 62000, whose resonant scattering efficiency is improved by about two orders of magnitude with respect to the unmodified structure. These results are especially useful for prospective applications in light emitting devices, such as nano-lasers or single-photon sources, in which vertical in- and out-coupling of the electromagnetic field is necessarily required.

Silica-embedded silicon photonic crystal waveguides.

We report on the fabrication and characterization of silicon photonic crystal waveguides completely embedded in silica. These waveguides offer a robust alternative to air-membranes and are fully compatible with monolithic integration. Despite the reduced refractive index contrast compared to the air-membranes, these waveguides offer a considerable operating range of approximately 10 nm in the 1550 nm window. While the reduced index contrast weakens the perturbations due to surface roughness, we measure losses of 35 +/- 3dB/cm compared to 12 +/- 3 dB/cm for nominally identical air-membranes. Numerical analysis reveals that the difference in loss results from the different mode distribution and group index of the respective waveguide modes. Radius disorder is used as a fitting parameter in the numerical simulations with the best fits found for disorder levels of 1.4 - 1.7 nm RMS, which attest to the high quality of our structures.

Slow to superluminal light waves in thin 3D photonic crystals.

Phase measurements on self-assembled three-dimensional photonic crystals show that the group velocity of light can flip from small positive (slow) to negative (superluminal) values in samples of a few mum size. This phenomenon takes place in a narrow spectral range around the second-order stop band and follows from coupling to weakly dispersive photonic bands associated with multiple Bragg diffraction. The observations are well accounted for by theoretical calculations of the phase delay and of photonic states in the finite-sized systems.

Compressive Femoral Neuropathy Associated with Iliopsoas Hematoma Complicating Hip Hemiarthroplasty: A Case Report.

INTRODUCTION: Femoral nerve compression caused by iliopsoas hematoma is a rare complication after hip surgery. To the best of our knowledge, this is the first case after hemiarthroplasty. In this case, iliacus hematoma resulted from spontaneous bleeding favored by anticoagulant therapy. CASE REPORT: A 78-year-old female developed left groin pain associated with typical symptoms of femoral nerve palsy about 2weeks after left hip hemiarthroplasty[1, 2, 3]. Computed tomography revealed the presence of a left iliopsoas hematoma that was surgically drained. Inguinal pain was immediately relieved, while nerve palsy recovered only partially, but the quality of life drastically improved and she was able to walk using a walker without pain. CONCLUSION: Even if it is a rare condition, the formation of a hematoma of iliopsoas muscle should be considered in patients that present symptoms of femoral nerve palsy, especially if treated with heparin or other anticoagulant drugs. Surgical drainage of the hematoma is indicated when symptoms are severe and disabling, and in this way, surgery could improve quality of life.

Wave transport in random systems: multiple resonance character of necklace modes and their statistical behavior.

We present the experimental observation of multiple resonance transport of light waves, due to necklace states, in disordered one-dimensional systems. Transmission phase measurements allow us to identify these states unambiguously and investigate their statistical properties. A theoretical model is developed to describe the resonance statistics and the frequency dependance of the localization length.

The fifty most cited Italian articles in the orthopaedic literature.

PURPOSES: It is widely known that in Orthopaedics, as in each specialty, the academic influence of an article is also determined by the number of times the article is cited. The aim of this study was to identify the 50 most frequently cited Italian orthopaedics journal articles and to analyse the characteristics that might have made them more citable. METHODS: Science Citation Index Expanded was searched for the 50 most frequently cited Italian orthopaedics journal articles between 1988 and 2013 in the subject category "Orthopaedics". RESULTS: The 50 most frequently cited articles were all published in English and were published in 12 of the 67 journals in the subject category "Orthopaedics" in the Institute for Scientific Information Web Science (Thomson Reuters, New York, New York, USA). One half of the articles were published before 2000 and the other half later. The number of citations ranged from 423 of the first article (mean citation/years 21.15) to 83 of the fiftieth (mean citation/years 16.60). The articles were all categorized under orthopaedic field, but each of them spanned from orthopaedics to a specific sub-specialty. The majority was clinical articles (n = 39), and the most common fields were sport orthopaedic surgery (including arthroscopy and cartilage) (n = 19) and biomechanics (n = 12). CONCLUSIONS: This list of 50 most frequently cited Italian articles is, to our knowledge, significantly important for the general orthopaedic scientific community, particularly for the Italian orthopaedic community. Researchers and doctors may use this work to make their future publications more influential and citable.

Etched distributed Bragg reflectors as three-dimensional photonic crystals: photonic bands and density of states.

The photonic band dispersion and density of states (DOS) are calculated for the three-dimensional (3D) hexagonal structure corresponding to a distributed Bragg reflector patterned with a 2D triangular lattice of circular holes. Results for the Si/SiO(2) and GaAs/Al(x)Ga(1-x)As systems determine the optimal parameters for which a gap in the 2D plane occurs and overlaps the 1D gap of the multilayer. The DOS is considerably reduced in correspondence with the overlap of 2D and 1D gaps. Also, the local density of states (i.e., the DOS weighted with the squared electric field at a given point) has strong variations depending on the position. Both results imply substantial changes of spontaneous emission rates and patterns for a local emitter embedded in the structure and make this system attractive for the fabrication of a 3D photonic crystal with controlled radiative properties.

Comparison of the POSSUM score and P-POSSUM score in patients with femoral neck fracture.

PURPOSE: The ageing of the population in developed countries has led to an increased number of patients with hip fractures all over the world. POSSUM and P-POSSUM scores predict morbidity and mortality of patients who will be undergoing a surgical treatment. The aim of this study was to evaluate accuracy of these two scores in hip-fractured patients. MATERIALS AND METHODS: Between January and December 2012, in our department 144 patients were hospitalised for femoral neck fractures according to the grade III or IV of Garden's classification treated with total hip arthroplasty or endoprosthesis. POSSUM scores and P-POSSUM scores were calculated for each patient with complete clinical data. We then calculated the observed and the expected ratio. RESULTS: 134 patients were eligible: 110 females and 24 males. The mean age for women was 79 years, and the mean age for men was 84 years. We observed 13 deaths and 66 complications. The POSSUM scores predicted 16 deaths and 60 complications, while P-POSSUM scores predicted 6 deaths. The O/E ratio for POSSUM mortality was 0.81 and for P-POSSUM was 2.17, while POSSUM morbidity was 1.1. CONCLUSION: In our study, we have shown that on the one hand, the POSSUM score predicted accurately both the mortality and morbidity in patients undergoing surgery for the femoral neck fracture, while on the other hand, the P-POSSUM score underestimated them. For this reason, we believe that the POSSUM is indeed a good audit tool, which can accurately predict both mortality and morbidity in a cohort of patients.

Self-tuned quantum dot gain in photonic crystal lasers.

We demonstrate that very few (2-4) quantum dots as a gain medium are sufficient to realize a photonic-crystal laser based on a high-quality nanocavity. Photon correlation measurements show a transition from a thermal to a coherent light state proving that lasing action occurs at ultralow thresholds. Observation of lasing is unexpected since the cavity mode is in general not resonant with the discrete quantum dot states and emission at those frequencies is suppressed. In this situation, the quasicontinuous quantum dot states become crucial since they provide an energy-transfer channel into the lasing mode, effectively leading to a self-tuned resonance for the gain medium.