Ecotoxic effect in Allium cepa due to sphalerite weathering arising in calcareous conditions.

The ecotoxic effect of Zn species arising from the weathering of the marmatite-like sphalerite ((Fe, Zn)S) in Allium cepa systems was herein evaluated in calcareous soils and connected with its sulfide oxidation mechanism to determine the chemical speciation responsible of this outcome. Mineralogical analyses (X-ray diffraction patterns, Raman spectroscopy, scanning electron microscopy and atomic force microscopy), chemical study of leachates (total Fe, Zn, Cd, oxidation-reduction potential, pH, sulfates and total alkalinity) and electrochemical assessments (chronoamperometry, chronopotentiometry, cyclic voltammetry, and electrochemical impedance spectroscopy) were carried out using (Fe, Zn)S samples to elucidate interfacial mechanisms simulating calcareous soil conditions. Results indicate the formation of polysulfides (Sn2-), elemental sulfur (S0), siderite (FeCO3)-like, hematite (Fe2O3)-like with sorbed CO32- species, gunningite (ZnSO4·H2O)-like phase and smithsonite (ZnCO3)-like compounds in altered surface under calcareous conditions. However, the generation of gunningite (ZnSO4·H2O)-like phase was predominant bulk-solution system. Quantification of damage rates ranges from 75 to 90% of bulb cells under non-carbonated conditions after 15-30 days, while 50-75% of damage level is determined under neutral-alkaline carbonated conditions. Damage ratios are 70.08 and 30.26 at the highest level, respectively. These findings revealed lower ecotoxic damage due to ZnCO3-like precipitation, indicating the effect of carbonates on Zn compounds during vegetable up-taking (exposure). Other environmental suggestions of the (Fe, Zn)S weathering and ecotoxic effects under calcareous soil conditions are discussed.

Establishing the Relationship between Quantum Capacitance and Softness of N-Doped Graphene/Electrolyte Interfaces within the Density Functional Theory Grand Canonical Kohn-Sham Formalism.

The joint density functional theory (JDFT) is applied in the context of the grand canonical Kohn-Sham theory to calculate the global and local softness of pristine and N-substituted graphene structures. A comparison is established between the different theoretical approaches to evaluate total capacitance, revealing that the JDFT approach presents the closest result of this property with experimental data. A model of series capacitors is used to determine the quantum and nonquantum contributions of total capacitance, which enables us to determine the limitations of the rigid band approximation for the studied systems. It is found that global chemical softness is proportional to the total capacitance measured in the experiments, when the geometry relaxation is neglected. In this context, it is possible to obtain quantum and total capacitance (and consequently softness) from an average number of electrons vs applied potential plots and the model of series capacitors. Likewise, the relation of capacitance and softness gives rise to a new definition of local capacitance within the JDFT formalism. The evaluation of global and local softness paves the way to analyze electrochemical surface reactivity as a function of applied potential for a solid-electrolyte interface.

Changes in biooxidation mechanism and transient biofilm characteristics by As(V) during arsenopyrite colonization with Acidithiobacillus thiooxidans.

Chemical and surface analyses are carried out using Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM-EDS), atomic force microscopy (AFM), confocal laser scanning microscopy (CLSM), glow discharge spectroscopy (GDS) and extracellular surface protein quantification to thoroughly investigate the effect of supplementary As(V) during biooxidation of arsenopyrite by Acidithiobacillus thiooxidans. It is revealed that arsenic can enhance bacterial reactions during bioleaching, which can strongly influence its mobility. Biofilms occur as compact-flattened microcolonies, being progressively covered by a significant amount of secondary compounds (S n2- , S0, pyrite-like). Biooxidation mechanism is modified in the presence of supplementary As(V), as indicated by spectroscopic and microscopic studies. GDS confirms significant variations between abiotic control and biooxidized arsenopyrite in terms of surface reactivity and amount of secondary compounds with and without As(V) (i.e. 6 µm depth). CLSM and protein analyses indicate a rapid modification in biofilm from hydrophilic to hydrophobic character (i.e. 1-12 h), in spite of the decrease in extracellular surface proteins in the presence of supplementary As(V) (i.e. stressed biofilms).

Analytical modeling of dissipative silencers.

This paper applies ideas originally developed in the field of acoustics of multiscale porous media to the analytical modeling of dissipative silencers. Analytical models for the long-wavelength acoustical properties of different types of dissipative silencers, such as pod silencers, lined ducts, splitters, and bar silencers, are introduced in this work. Some of these models account for the possibility of using different porous materials in a given silencer. For instance, a model for a splitter silencer comprising baffles made of different porous materials is derived. Examples of the sound transmission behavior of the said types of silencers are presented to evidence that the dissipation of sound energy is largely influenced by pressure diffusion occurring in the porous constituents. The predictions of the analytical models are in good agreement with finite element calculations.

Dating stalagmite from Caverna do Diabo (Devil´S Cave) by TL and EPR techniques.

A cylindrical fragment of stalagmite from Caverna do Diabo, State of São Paulo, Brazil, has been studied and dated by thermoluminescence and electron paramagnetic resonance techniques. The thermoluminescence glow curves of stalagmite samples and subsequently gamma irradiated, have shown rise of three peaks at 135, 180 and 265 °C. From electron paramagnetic resonance spectra of stalagmite was possible to clearly identify three paramagnetic centers in the g = 2.0 region: Centers I, II and III are due to , and , respectively. The additive method was applied to calculate the accumulated dose using thermoluminescence peak at 265 °C and the electron paramagnetic resonance signal at g = 1.9973 of CO- 2 radical. The ages of the different slices of stalagmite were determined from the Dac- values and Dan- value, obtaining an average of 86410 for central slice, 53421 for second slice, 31490 for third slice and 46390 years B.P. for the central region of upper end.

Comparison of occupational noise legislation in the Americas: an overview and analysis.

The workplace contributes significantly to the total dose of daily noise to which a person is subjected. Therefore, millions of people around the world are exposed to potentially dangerous noise levels and consequently, there is an urgent, global need for legislation to adequately protect the auditory health of workers. Occupational noise legislation has been adopted in many of the countries with different degrees of comprehensiveness and varying levels of sophistication. This paper presents a global view of current legislation on occupational noise in the 22 countries that make up the Americas, that is, Latin America, Canada, and the United States. Upon analysis of the legislation, there are notable differences among countries in the defined values for permissible exposure limit (PEL) and exchange rate. Of the countries that have regulations, the majority (81%) use a PEL of 85 dBA. A PEL of 85 dBA and the 3-dB exchange rate are currently used by 32% of the nations in the Americas. Most nations limit impulsive noise exposure to a peak unweighted sound pressure level of 140 dB (or dBC), while a few use slightly lower limits. However, 27% of the countries in the region still have not established regulations with respect to permissible noise levels and exchange rates. This fact is leaving millions of workers in the Americas unprotected against occupational noise. Provide an overview and analysis of the current legislation on occupational noise in the 22 countries that make up the Americas. The information on legislation, regulations, and standards discussed in this paper were obtained directly from official government sources in each country, the International Labour Organization database, or through various colleagues in each country. (1) There are notable differences among countries in the defined values for PEL and exchange rate. (2) Of the countries that have regulations, the majority (81%) use a PEL of 85 dBA. A PEL of 85 dBA and the 3-dB exchange rate are currently used by 32% of the nations in the Americas. (3) Most nations limit impulsive noise exposure to a peak unweighted sound pressure level of 140 dB (or dBC), while a few use slightly lower limits. (4) 27% of the countries in the region still have not established regulations with respect to permissible noise levels and exchange rates. (5) Millions of workers in the Americas are unprotected against occupational noise.

Streets classification models by urban features for road traffic noise estimation.

Road traffic is the primary source of environmental noise pollution in cities. This problem is also spreading due to inadequate urban expansion planning. Hence, integrating road traffic noise analysis into urban planning is necessary for reducing city noise in an effective, adaptable, and sustainable way. This study aims to develop a methodology that applies to any city for the stratification of urban roads by their functionality through only their urban features. It is intended to be a tool to cluster similar streets and, consequently, traffic noise to enable urban and transportation planners to support the reduction of people's noise exposure. Three multivariate ordered logistic regression statistical models (Model 1, 2, and 3) are presented that significantly stratify urban roads into five, four, and three categories, respectively. The developed models exhibit a McFadden pseudo-R2 between 0.5 and 0.6 (equivalent to R2 >0.8). The choice between Model 1 or 2 depends on the scale of the city. Model 1 is recommended for developed cities with an extensive road network, while Model 2 is most suitable in intermediate and growing cities. On the other hand, Model 3 could be applied at any city scale but focused on local management of transit routes and for designing acoustic sensor installations, urban soundwalks, and identification of quiet areas. Urban features related to road width and length, presence of transport infrastructure, and public transport routes are associated with increased traffic noise in all three models. These models prove useful for future action plans aimed at reducing noise through strategic urban planning.

Fever of unknown origin: A 12-year case series in Colombia.

BACKGROUND: Fever of unknown origin (FUO) is a diagnostic challenge with highly heterogeneous causes. Its etiology can change according to the studied regions, and the chance of reaching a diagnosis depends on available resources. The aim of this study is to describe the clinical characteristics, etiology and the usefulness of diagnostic aids in cases of FUO managed over 12 years in a Colombian reference center. METHODOLOGY: Single-institution retrospective case series. All cases of FUO between 2006 and 2017 were identified with the help of an electronic medical record search software. Cases of adults with fever for more than three weeks who remained undiagnosed after three days of hospitalization are described. RESULTS: Of 1,009 cases evaluated, 112 cases met the inclusion criteria (median age 43 years, 66% men). The etiologies identified were infectious (31.2%), inflammatory (20.5%), neoplastic (14.3%), and miscellaneous (2.7%) diseases. 31.2% remained without etiological diagnosis. The most frequent conditions were tuberculosis (17%), Hodgkin's lymphoma (7.1%), systemic lupus erythematosus (6.3%), disseminated histoplasmosis, and adult Still's disease. Contrast tomography and biopsies were the studies that most frequently supported or confirmed the final diagnosis. CONCLUSIONS: This series of contemporary Latin American cases suggests that the categories of FUO etiologies are similar to those reported in studies from developed countries, with tuberculosis being the most frequent cause in our setting. Our results highlight the importance of tomography-guided invasive studies in the diagnostic approach to FUO.

Dataset for polyphonic sound event detection tasks in urban soundscapes: The synthetic polyphonic ambient sound source (SPASS) dataset.

This paper presents the Synthetic Polyphonic Ambient Sound Source (SPASS) dataset, a publicly available synthetic polyphonic audio dataset. SPASS was designed to train deep neural networks effectively for polyphonic sound event detection (PSED) in urban soundscapes. SPASS contains synthetic recordings from five virtual environments: park, square, street, market, and waterfront. The data collection process consisted of the curation of different monophonic sound sources following a hierarchical class taxonomy, the configuration of the virtual environments with the RAVEN software library, the generation of all stimuli, and the processing of this data to create synthetic recordings of polyphonic sound events with their associated metadata. The dataset contains 5000 audio clips per environment, i.e., 25,000 stimuli of 10 s each, virtually recorded at a sampling rate of 44.1 kHz. This effort is part of the project ``Integrated System for the Analysis of Environmental Sound Sources: FuSA System'' in the city of Valdivia, Chile, which aims to develop a system for detecting and classifying environmental sound sources through deep Artificial Neural Network (ANN) models.

Serial measurements of lymphocytes, D-dimer, LDH, and CRP do not improve the ability to predict COVID-19 adverse outcomes.

OBJECTIVE: We evaluated the discriminatory ability of variations in lymphocyte, D-dimer, C-reactive protein (CRP), and lactate dehydrogenase (LDH) serum levels at 48 to 72 hours of hospitalization compared with baseline measurements to predict unfavorable clinical outcomes in patients with COVID-19. METHODS: We analyzed diagnostic test results based on a retrospective cohort to determine the ability of variations (gradients or ratios) in patients' lymphocyte, D-dimer, CRP, and LDH serum levels taken 48 to 72 hours after hospital admission to predict adverse outcomes such as death, mechanical ventilation, or intensive care unit (ICU) admission developing. RESULTS: Among 810 patients (56.1% men, age 61.6 ± 16.2 years), 37.5% had at least one adverse outcome; 28.2% required ICU admission, 26.5% required mechanical ventilation, and 19.4% died during hospitalization. In comparing baseline measurements with measurements at 48 to 72 hours, D-dimer, lymphocyte delta, LDH, and CRP had similar discriminatory ability (area under the receiver operating characteristic curve [AUC] 0.57 vs. 0.56, 0.53 vs. 0.57, 0.64 vs. 0.66, and 0.62 vs. 0.65, respectively). CONCLUSIONS: Measuring serum risk markers upon hospital admission can be used to evaluate risk of adverse outcomes in hospitalized patients with COVID-19. Repeating these measurements at 48 to 72 hours does not improve discriminatory ability.

A Neural Network Approach to Reducing the Costs of Parameter-Setting in the Production of Polyethylene Oxide Nanofibers.

Nanofibers, which are formed by the electrospinning process, are used in a variety of applications. For this purpose, a specific diameter suited for each application is required, which is achieved by varying a set of parameters. This parameter adjustment process is empirical and works by trial and error, causing high input costs and wasting time and financial resources. In this work, an artificial neural network model is presented to predict the diameter of polyethylene nanofibers, based on the adjustment of 15 parameters. The model was trained from 105 records from data obtained from the literature and was then validated with nine nanofibers that were obtained and measured in the laboratory. The average error between the actual results was 2.29%. This result differs from those taken in an evaluation of the dataset. Therefore, the importance of increasing the dataset and the validation using independent data is highlighted.

Influence of oxygen vacancies, surface composition, and crystallite size on the photoelectrochemical oxidation activity of C,N-codoped TiO2 for cefadroxil abatement along with O3.

This study aims the development of photoelectrodes to be incorporated in a photoelectrocatalytic ozonation (PECO) process for tertiary treatment of urban wastewaters, targeting the removal of contaminants of emerging concern (CEC). PECO tests were performed using urban wastewater after secondary treatment fortified with Cefadroxil (CFX, C16H17N3O5S), as target model CEC. Three Nitrogen and Carbon doped TiO2 (CN-TiO2) electrodes were synthesized by anodizing at 50, 70, and 90 V, and calcined. These materials were characterized by X-Ray diffraction and Rietveld refinement, Scanning Electron Microscopy, Diffuse Reflectance Spectroscopy, X-ray photoelectron spectroscopy, chronoamperometry, and electrochemical impedance spectroscopy, to correlate defects with photoactivity. All photoanodes considerably reduced their main bandgaps by the incorporation of C and N species, to enable absorption capacities in the UV region using a Xe lamp. The lowest oxygen vacancy content and largest crystallite size were found for CN-TiO2-70, favoring the reduction of bulk defects that could act as recombination of charge carriers. Therefore, oxygen vacancies affect more the TiO2 photoactivity compared to the crystallite size or the light absorption capacity, confirming that a lower content of vacancies in the material bulk and surface doping significantly influence the activity as detected by Rietveld refinement, DRS, and XPS. The electrochemical techniques confirm that the highest photocurrent was obtained for CN-TiO2-70, whence this photoanode was chosen to carry out the CFX degradation. A point defect model simulating Nyquist plot reveals that the photoactivity depends on the speed to diffuse oxygen vacancies through the TiO2 coating. All abatement processes were followed by high-performance liquid chromatography, and Total Organic Carbon (TOC). At neutral and alkaline conditions, CFX is eliminated to levels below the analytical detection limit after 90 min of treatment (TOC removals of 87 and 91%, respectively), indicating that the coupling between the CN-TiO2-70 photocatalyst and ozone is effective in eliminating the contaminant due to parallel routes forming •OH species. Lower CFX degradation observed at acidic pH (TOC removal of 70%) is assigned to the difficulty of oxidizing protonated CFX species.

Identification of defect centers responsible for thermoluminescence emission in sol-gel synthesized calcium silicate phosphor.

The thermoluminescence (TL) of calcium silicate phosphor (CSO) prepared by the sol-gel method and sintered at 1200 °C were investigated. From Tm-Tstop curve, TL emission spectrum and computer deconvolution using electron traps with discrete and continuous distributions, the glow curves were found to be composed of four TL peaks (117, 190, 250 and 275 °C) with a single emission band centered at 370 nm. Electron paramagnetic resonance (EPR) investigation has been carried out to identify the defect centers formed in the CSO phosphor by γ-irradiation and find the centers related to the TL process in the phosphor. At room temperature, three defect centers were observed. The first center, characterized by the principal g-values of 2.014, 2.011, and 2.0080 was assigned to an O- ion. The second center with g-values 2.015, 2.013, and 2.010 is also attributed to an O- ion and is associated with the TL peak at 280 °C. The third center, with an isotropic g-value of 2.0011 was identified as the F+ center (singly ionized oxygen vacancy) and relates to the TL peak at 280 °C.

Modeling the sulfamethoxazole degradation by active chlorine in a flow electrochemical reactor.

The aim of this study is to propose a continuous physicochemical model accounting for the active chlorine production used to degrade recalcitrant sulfamethoxazole (SMX) in an electrochemical flow reactor. The computational model describes the fluid mechanics and mass transfer occurring in the re/actor, along with the electrode kinetics of hydrogen evolution reaction arising on a stainless steel cathode, and the chloride oxidation on a DSA. Specifically, the anodic contributions assume the heterogeneous nature of the adsorbed chlorine species formed on this surface, which are a model requirement to correctly define the experimental reactor performance and degradation efficiency of the contaminant. The experimental validation conducted at different applied current densities, volumetric flows, and chloride concentrations is adequately explained by the model, thus evidencing some of the phenomena controlling the electrocatalytic chlorine production for environmental applications. The best conditions to eliminate the SMX are proposed based on the theoretical analysis of the current efficiency calculated with the model, and experimentally confirmed. The use of the Ti/RuO2-ZrO2-Sb2O3 anode at the bench scale improves the SMX removal by using electro-generated chlorine species adsorbed on its surface, which remarkably increases the oxidation potential of the system along with chlorine desorbed from the electrode. This is a technological innovation concerning other mediated oxidation methods entirely using oxidants in solution.

Identification of ESR centers and their role in the TL of natural salt from Lluta, Peru.

In this study, the thermoluminescence (TL) properties of natural NaCl from Lluta, Arequipa-Peru was investigated. The number of peaks and the kinetic parameters associated with the TL glow peaks of NaCl sample after gamma-irradiation were analyzed by initial rise and deconvolution method. Defect centers induced in pure salt by gamma irradiation have been studied by electron spin resonance (ESR) with a view to identify the centers associated with the TL process in the salt. Thermal annealing experiments indicate the presence of three defect centers. Center I characterized by the g-value 2.011 is identified as an O- ion and relates with the dominant TL peak at 220 °C. Center II with a g-value of 2.0058 is attributed to a F center and is found to correlate with the 128 °C TL peak. Center III has of g-value 2.014 and is also assigned to an O- ion.

Development and application of practical criteria for the recognition of potential Health Restoration Soundscapes (HeReS) in urban greenspaces.

Urban greenspace soundscapes can contribute to the restorative effects that nature provides for the psychological and emotional health of people when certain conditions are met. The main objective of this paper is to propose practical criteria to help planners and managers in the design, development and preservation of urban greenspaces whose soundscapes may contribute to the renewal of health. Systematic literature review informed a conceptual potential Health Restoration Soundscapes (HeReS) model, based on five conditions: (1) Naturalness, (2) Sound Levels, (3) Perceived Sound Sources, (4) Soundscape Assessment, and (5) Sensescape Coherence and proposed Health Restoration Soundscapes Criteria (HeReS-C), for HeReS evaluation in urban green areas. The HeReS-C were applied in 21 sites in Argentina, Sweden, and Chile. General results are provided for all 21 sites, along with three in-depth profiles of HeReS-C applications that provide case studies across a range of resulting HeReS-C scenarios, including sites that meet the HeReS-C criteria, those that do not, and sites that could qualify in the future, if appropriate management measures are taken. HeReS-C showed to be a promising tool for the recognition of potential health-restoring soundscapes in urban greenspaces; informing their design and management to favor the well-being and health of the population.

Inside the Thrombus: Association of Hemostatic Parameters With Outcomes in Large Vessel Stroke Patients.

Background: Actual clinical management of ischemic stroke (IS) is based on restoring cerebral blood flow using tissue plasminogen activator (tPA) and/or endovascular treatment (EVT). Mechanical thrombectomy has permitted the analysis of thrombus structural and cellular classic components. Nevertheless, histological assessment of hemostatic parameters such as thrombin-activatable fibrinolysis inhibitor (TAFI) and matrix metalloproteinase 10 (MMP-10) remains unknown, although their presence could determine thrombus stability and its response to thrombolytic treatment, improving patient's outcome. Methods: We collected thrombi (n = 45) from large vessel occlusion (LVO) stroke patients (n = 53) and performed a histological analysis of different hemostatic parameters [TAFI, MMP-10, von Willebrand factor (VWF), and fibrin] and cellular components (erythrocytes, leukocytes, macrophages, lymphocytes, and platelets). Additionally, we evaluated the association of these parameters with plasma levels of MMP-10, TAFI and VWF activity and recorded clinical variables. Results: In this study, we report for the first time the presence of MMP-10 and TAFI in all thrombi collected from LVO patients. Both proteins were localized in regions of inflammatory cells, surrounded by erythrocyte and platelet-rich areas, and their content was significantly associated (r = 0.41, p < 0.01). Thrombus TAFI was lower in patients who died during the first 3 months after stroke onset [odds ratio (OR) (95%CI); 0.59 (0.36-0.98), p = 0.043]. Likewise, we observed that thrombus MMP-10 was inversely correlated with the amount of VWF (r = -0.30, p < 0.05). Besides, VWF was associated with the presence of leukocytes (r = 0.37, p < 0.05), platelets (r = 0.32, p < 0.05), and 3 months mortality [OR (95%CI); 4.5 (1.2-17.1), p = 0.029]. Finally, plasma levels of TAFI correlated with circulating and thrombus platelets, while plasma MMP-10 was associated with cardiovascular risk factors and functional dependence at 3 months. Conclusions: The present study suggests that the composition and distribution of thrombus hemostatic components might have clinical impact by influencing the response to pharmacological and mechanical therapies as well as guiding the development of new therapeutic strategies.

Improving ozonation to remove carbamazepine through ozone-assisted catalysis using different NiO concentrations.

The carbamazepine (CBZ) abatement is herein evaluated using catalytic ozonation at different NiO concentrations as catalyst: 100, 300, and 500 mg L-1, revealing its total destruction after 5 min of reaction either by conventional or catalytic ozonation. The NiO incorporation in the reactor does not increase the destruction rate, but the catalyst presence enhances the partial mineralization of the contaminant by conversion into oxalic and formic acids and the removal of total organic carbon (TOC) associated with the formation of oxidant species such as hydroxyl radical. Evidence for this behavior is the accumulation rate of the above acids which rise proportionally to the NiO concentration. The highest NiO concentration (500 mg L-1) reached a maximum TOC removal of 79.2%, which exceeds by 50% the outcome of the conventional treatment. The accumulation-decomposition profiles of oxalic and formic acids suggest the occurrence of simultaneous reaction mechanisms (hydroxyl radicals and complex formations) on the catalyst during CBZ ozonation. According to XPS analysis, the presence of nitrogen species in the NiO-ozonated was attributable to byproducts of CBZ decomposition. The toxicity bioassay based on Lactuca sativa seeds demonstrate that ozonated samples attained similar plant germination than the reference substance (water) after 120 min of treatment. This result is comparable with or without the catalyst presence, indicating the formation of non-toxic accumulated byproducts at the end of the ozonation reaction.

Dating and determination of firing temperature of ancient potteries from Yumina archaeological site, Arequipa, Peru.

Pottery fragments from the Yumina archaeological site, Arequipa, Peru, were dated by means of thermoluminescence (TL) and optically stimulated luminescence (OSL). Electron paramagnetic resonance (EPR) technique was used to study the firing temperature using the iron signal (Fe3+) as a firing temperature reference. The ages of the samples were found to be between 1190 ±â€¯30 and 1240 ±â€¯80 years (777 ±â€¯80 and 827 ±â€¯30 A.D.) determined by both techniques. The firing temperature of ceramics was found to be around 550  ± 50 °C. Our study, based on the combination of TL and OSL techniques to study Yumina archaeological site pottery, will be helpful for archaeologists in Peru. With the results of this investigation, we can understand the chronology and determine the areas of dispersion and density of the archaeological occupation in the Arequipa Valley. In addition, the calculated ages are consistent with the occupation period of the Yumina archaeological site estimated by stratigraphic analysis of the potteries.

On the sound radiation from a circular hatchway.

Low-frequency sound radiation from vibrating plates is a practical problem often found in engineering applications. In this article, the sound radiation from a circular hatchway is examined using a discrete approach based in the acoustic resistance matrix. Since this matrix can be combined with the volume velocity vector on the discretized vibrating circular surface, the sound radiation efficiency can be estimated through matrix approaches. The limitation of the approach is discussed by using benchmark results presented in previous works. The method produces acceptable results in low frequencies when the response of the plate is dominated by one low structural mode. When the response of more than one mode is significant, the method gives good estimation of the total sound power just for frequencies up to the first resonance. However, the method can be applied to complex and irregular vibrating plane surfaces.