Flexible Force Sensor Based on a PVA/AgNWs Nanocomposite and Cellulose Acetate.

Nanocomposites are materials of special interest for the development of flexible electronic, optical, and mechanical devices in applications such as transparent conductive electrodes and flexible electronic sensors. These materials take advantage of the electrical, chemical, and mechanical properties of a polymeric matrix, especially in force sensors, as well as the properties of a conductive filler such as silver nanowires (AgNWs). In this work, the fabrication of a force sensor using AgNWs synthesized via the polyol chemical technique is presented. The nanowires were deposited via drop-casting in polyvinyl alcohol (PVA) to form the active (electrode) and resistive (nanocomposite) sensor films, with both films separated by a cellulose acetate substrate. The dimensions of the resulting sensor are 35 mm × 40 mm × 0.1 mm. The sensor shows an applied force ranging from 0 to 3.92 N, with a sensitivity of 0.039 N. The sensor stand-off resistance, exceeding 50 MΩ, indicates a good ability to detect changes in applied force without an external force. Additionally, studies revealed a response time of 10 ms, stabilization of 9 s, and a degree of hysteresis of 1.9%. The voltage response of the sensor under flexion at an angle of 85° was measured, demonstrating its functionality over a prolonged period. The fabricated sensor can be used in applications that require measuring pressure on irregular surfaces or systems with limited space, such as for estimating movement in robot joints.

Dual-Band CPW Graphene Antenna for Smart Cities and IoT Applications.

In this paper, a dual-band graphene coplanar waveguide antenna is designed for smart cities and internet of things applications. A graphene film is chosen as the conductive material for the radiation patches and ground plane with a thickness of 240 µm and an electric conductivity of 3.5 × 105 S/m. The dielectric is glass with a dielectric permittivity of 6 and a thickness of 2 mm. The implementation of the antenna on glass permits the integration of the antenna in smart cities and IoT applications. This antenna is based on two trapezoidal patches that generate the dual-band behavior. The overall dimensions of the antenna are 30 mm × 30 mm × 2 mm. The reflection coefficient, gain, and radiation patterns were measured and compared with the simulations. The antenna covers two frequency bands; the lower band covers the 2.45 GHz ISM band, and the upper band range covers from 4 to 7 GHz.