What Is the Patient-reported Outcome and Complication Incidence After Operative Versus Nonoperative Treatment of Minimally Displaced Tibial Plateau Fractures?

BACKGROUND: Much controversy remains about whether minimally displaced tibial plateau fractures should be treated operatively or nonoperatively. It is generally accepted that gaps and stepoffs up to 2 mm can be tolerated, but this assumption is based on older studies using plain radiographs instead of CT to assess the degree of initial fracture displacement. Knowledge regarding the relationship between the degree of fracture displacement and expected functional outcome is crucial for patient counseling and shared decision-making, specifically in terms of whether to perform surgery. QUESTIONS/PURPOSES: (1) Is operative treatment associated with improved patient-reported outcomes compared with nonoperative treatment in minimally displaced tibial plateau fractures (fractures with up to 4 mm of displacement)? (2) What is the difference in the risk of complications after operative versus nonoperative treatment in minimally displaced tibial plateau fractures? METHODS: A multicenter, cross-sectional study was performed in patients treated for tibial plateau fractures between 2003 and 2019 at six hospitals. Between January 2003 and December 2019, a total of 2241 patients were treated for tibial plateau fractures at six different trauma centers. During that time, the general indication for open reduction and internal fixation (ORIF) was intra-articular displacement of > 2 mm. Patients treated with ORIF and those treated nonoperatively were potentially eligible; 0.2% (4) were excluded because they were treated with amputation because of severe soft tissue damage, whereas 4% (89) were excluded because of coexisting conditions that complicated outcome measurement including Parkinson disease, cerebrovascular accident, or paralysis (conditions causing an inability to walk). A further 2.7% (60) were excluded because their address was unknown, and 1.4% (31) were excluded because they spoke a language other than Dutch. Based on that, 1328 patients were potentially eligible for analysis in the operative group and 729 were potentially eligible in the nonoperative group. At least 1 year after injury, all patients were approached and asked to complete the Knee injury and Osteoarthritis Outcome Scale (KOOS) questionnaire. A total of 813 operatively treated patients (response percentage: 61%) and 345 nonoperatively treated patients (response percentage: 47%) responded to the questionnaire. Patient characteristics including age, gender, BMI, smoking, and diabetes were retrieved from electronic patient records, and imaging data were shared with the initiating center. Displacement (gap and stepoff) was measured for all participating patients, and all patients with minimally displaced fractures (gap or stepoff ≤ 4 mm) were included, leaving 195 and 300 in the operative and nonoperative groups, respectively, for analysis here. Multivariate linear regression was performed to assess the association of treatment choice (nonoperative or operative) with patient-reported outcomes in minimally displaced fractures. In the multivariate analysis, we accounted for nine potential confounders (age, gender, BMI, smoking, diabetes, gap, stepoff, AO/OTA classification, and number of involved segments). In addition, differences in complications after operative and nonoperative treatment were assessed. The minimum clinically important differences for the five subscales of the KOOS are 11 for symptoms, 17 for pain, 18 for activities of daily living, 13 for sports, and 16 for quality of life. RESULTS: After controlling for potentially confounding variables such as age, gender, BMI, and AO/OTA classification, we found that operative treatment was not associated with an improvement in patient-reported outcomes. Operative treatment resulted in poorer KOOS in terms of pain (-4.7 points; p = 0.03), sports (-7.6 points; p = 0.04), and quality of life (-7.8 points; p = 0.01) compared with nonoperative treatment, but those differences were small enough that they were likely not clinically important. Patients treated operatively had more complications (4% [7 of 195] versus 0% [0 of 300]; p = 0.01) and reoperations (39% [76 of 195] versus 6% [18 of 300]; p < 0.001) than patients treated nonoperatively. After operative treatment, most reoperations (36% [70 of 195]) consisted of elective removal of osteosynthesis material. CONCLUSION: No differences in patient-reported outcomes were observed at midterm follow-up between patients treated surgically and those treated nonsurgically for tibial plateau fractures with displacement up to 4 mm. Therefore, nonoperative treatment should be the preferred treatment option in minimally displaced fractures. Patients who opt for nonoperative treatment should be told that complications are rare, and only 6% of patients might undergo surgery by midterm follow-up. Patients who opt for surgery of a minimally displaced tibial plateau fracture should be told that complications may occur in up to 4% of patients, and 39% of patients may undergo a secondary intervention (most of which are elective implant removal). LEVEL OF EVIDENCE: Level III, therapeutic study.

3D-assisted corrective osteotomies of the distal radius: a comparison of pre-contoured conventional implants versus patient-specific implants.

PURPOSE: There is a debate whether corrective osteotomies of the distal radius should be performed using a 3D work-up with pre-contoured conventional implants (i.e., of-the-shelf) or patient-specific implants (i.e., custom-made). This study aims to assess the postoperative accuracy of 3D-assisted correction osteotomy of the distal radius using either implant. METHODS: Twenty corrective osteotomies of the distal radius were planned using 3D technologies and performed on Thiel embalmed human cadavers. Our workflow consisted of virtual surgical planning and 3D printed guides for osteotomy and repositioning. Subsequently, left radii were fixated with patient-specific implants, and right radii were fixated with pre-contoured conventional implants. The accuracy of the corrections was assessed through measurement of rotation, dorsal and radial angulation and translations with postoperative CT scans in comparison to their preoperative virtual plan. RESULTS: Twenty corrective osteotomies were executed according to their plan. The median differences between the preoperative plan and postoperative results were 2.6° (IQR: 1.6-3.9°) for rotation, 1.4° (IQR: 0.6-2.9°) for dorsal angulation, 4.7° (IQR: 2.9-5.7°) for radial angulation, and 2.4 mm (IQR: 1.3-2.9 mm) for translation of the distal radius, thus sufficient for application in clinical practice. There was no significant difference in accuracy of correction when comparing pre-contoured conventional implants with patient-specific implants. CONCLUSION: 3D-assisted corrective osteotomy of the distal radius with either pre-contoured conventional implants or patient-specific implants results in accurate corrections. The choice of implant type should not solely depend on accuracy of the correction, but also be based on other considerations like the availability of resources and the preoperative assessment of implant fitting.

Tibial plateau fracture morphology based on injury force mechanism is predictive for patient-reported outcome and conversion to total knee arthroplasty.

PURPOSES: The aim of this study was to assess the relationship between injury mechanism-based fracture patterns and patient-reported outcome as well as conversion rate to total knee arthroplasty (TKA) at follow-up. METHODS: A multicenter cross-sectional study was performed including 1039 patients treated for a tibial plateau fracture between 2003 and 2019. At a mean follow-up of 5.8 ± 3.7 years, patients completed the Knee injury and Osteoarthritis Outcome Score (KOOS) questionnaire. For all patients, the injury force mechanism was defined based on CT images. Analysis of variance (ANOVA) was used to assess the relationship between different injury mechanisms and functional recovery. Cox regression was performed to assess the association with an increased risk on conversion to TKA. RESULTS: A total of 378 (36%) patients suffered valgus-flexion, 305 (29%) valgus-extension, 122 (12%) valgus-hyperextension, 110 (11%) varus-flexion, 58 (6%) varus-hyperextension, and 66 (6%) varus-extension injuries. ANOVA showed significant different KOOS values between injury fracture patterns in all subscales (P < 0.01). Varus-flexion injuries had the lowest average KOOS scores (symptoms 65; pain 67; ADL 72; sport 35; QoL 48). Varus-flexion mechanism was associated with an increased risk on a TKA (HR 1.8; P = 0.03) whereas valgus-extension mechanism was associated with a reduced risk on a TKA (HR 0.5; P = 0.012) as compared to all other mechanisms. CONCLUSION: Tibial plateau fracture patterns based on injury force mechanisms are associated with clinical outcome. Varus-flexion injuries have a worse prognosis in terms of patient-reported outcome and conversion rate to TKA at follow-up. Valgus-extension injuries have least risk on conversion to TKA.

3D surgical planning including patient-specific drilling guides for tibial plateau fractures.

Aims: Proper preoperative planning benefits fracture reduction, fixation, and stability in tibial plateau fracture surgery. We developed and clinically implemented a novel workflow for 3D surgical planning including patient-specific drilling guides in tibial plateau fracture surgery. Methods: A prospective feasibility study was performed in which consecutive tibial plateau fracture patients were treated with 3D surgical planning, including patient-specific drilling guides applied to standard off-the-shelf plates. A postoperative CT scan was obtained to assess whether the screw directions, screw lengths, and plate position were performed according the preoperative planning. Quality of the fracture reduction was assessed by measuring residual intra-articular incongruence (maximum gap and step-off) and compared to a historical matched control group. Results: A total of 15 patients were treated with 3D surgical planning in which 83 screws were placed by using drilling guides. The median deviation of the achieved screw trajectory from the planned trajectory was 3.4° (interquartile range (IQR) 2.5 to 5.4) and the difference in entry points (i.e. plate position) was 3.0 mm (IQR 2.0 to 5.5) compared to the 3D preoperative planning. The length of 72 screws (86.7%) were according to the planning. Compared to the historical cohort, 3D-guided surgery showed an improved surgical reduction in terms of median gap (3.1 vs 4.7 mm; p = 0.126) and step-off (2.9 vs 4.0 mm; p = 0.026). Conclusion: The use of 3D surgical planning including drilling guides was feasible, and facilitated accurate screw directions, screw lengths, and plate positioning. Moreover, the personalized approach improved fracture reduction as compared to a historical cohort.