Lignin Upconversion by Functionalization and Network Formation.

Lignin, a complex and abundant biopolymer derived from plant cell walls, has emerged as a promising feedstock for sustainable material development. Due to the high abundance of phenylpropanoid units, aromatic rings, and hydroxyl groups, lignin is an ideal candidate for being explored in various material applications. Therefore, the demand on lignin valorization for development of value-added products is significantly increasing. This mini-review provides an overview of lignin upconversion, focusing on its functionalization through chemical and enzymatic routes, and its application in lignin-based polymer resins, hydrogels, and nanomaterials. The functionalization of lignin molecules with various chemical groups offers tailored properties and increased compatibility with other materials, expanding its potential applications. Additionally, the formation of lignin-based networks, either through cross-linking or blending with polymers, generates novel materials with improved mechanical, thermal, and barrier properties. However, challenges remain in optimizing functionalization techniques, preserving the innate complexity of lignin, and achieving scalability for industrial implementation. As lignin's potential continues to be unlocked, it is poised to contribute significantly to the shift towards more eco-friendly and resource-efficient industries.

Fabrication of Patchy Silica Microspheres with Tailor-Made Patch Functionality using Photo-Iniferter Reversible-Addition-Fragmentation Chain-Transfer (PI-RAFT) Polymerization.

Their inherent directional information renders patchy particles interesting building blocks for advanced applications in materials science. In this study, a feasible method to fabricate patchy silicon dioxide microspheres is demonstrated, which they are able to equip with tailor-made polymeric materials as patches. Their fabrication method relies on a solid-state supported microcontact printing (µCP) routine optimized for the transfer of functional groups to capillary-active substrates, which is used to introduce amino functionalities as patches to a monolayer of particles. Acting as anchor groups for polymerization, photo-iniferter reversible addition-fragmentation chain-transfer (RAFT) is used to graft polymer from the patch areas. Accordingly, particles with poly(N-acryloyl morpholine), poly(N-isopropyl acrylamide), and poly(n-butyl acrylate) are prepared as representative acrylic acid-derived functional patch materials. To facilitate their handling in water, a passivation strategy of the particles for aqueous systems is introduced. The protocol introduced here, therefore, promises a vast degree of freedom in engineering the surface properties of highly functional patchy particles. This feature is unmatched by other techniques to fabricate anisotropic colloids. The method, thus, can be considered a platform technology, culminating in the fabrication of particles that possess locally precisely formed patches on particles at a low µm scale with a high material functionality.

Treatment of neovascular age-related macular degeneration: insights into drug-switch real-world from the Berlin Macular Registry.

PURPOSE: Bevacizumab, ranibizumab, and aflibercept are commonly used to treat neovascular age-related macular degeneration (nAMD). The results of various interventional, mostly randomized head-to-head studies, indicate statistical non-inferiority of these three drugs. The results of these studies are often interpreted as the three drugs being freely interchangeable, resulting in some health systems to pressure ophthalmologists to preferentially use the less expensive bevacizumab. This study analyzes switching from aflibercept or ranibizumab to bevacizumab and back under real-world conditions in order to investigate the assumption of interchangeability of the drugs. METHODS: Treatment data of IVT patients with diagnosed nAMD were extracted from the clinical Berlin Macular Registry database. Patients who underwent a drug switch from aflibercept or ranibizumab to bevacizumab were subject of this study. Statistical comparisons were pre-planned for best corrected visual acuity, central retinal thickness, macular volume, and length of injection interval. Additional endpoints were analyzed descriptively. RESULTS: Mean visual acuity decreased from 0.57 ± 0.05 under aflibercept/ranibizumab to 0.68 ± 0.06 logMAR after the switch (P = 0.001; N = 63). CRT increased from 308 ± 11 µm to 336 ± 16 µm (P = 0.011; N = 63). About half of the subjects were switched back: visual acuity increased from 0.69 ± 0.08 logMAR to 0.58 ± 0.09 logMAR (N = 26). CRT decreased from 396 ± 28 to 337 ± 20 µm (N = 28). CONCLUSION: The data provides real-world evidence that there is loss of visual acuity and an increase in retinal edema after switching to bevacizumab. Thus, the assumption of free interchangeability cannot be confirmed in this cohort.

Synthesis of nanostructured protein-mineral-microcapsules by sonication.

We propose a simple and eco-friendly method for the formation of composite protein-mineral-microcapsules induced by ultrasound treatment. Protein- and nanoparticle-stabilized oil-in-water (O/W) emulsions loaded with different oils are prepared using high-intensity ultrasound. The formation of thin composite mineral proteinaceous shells is realized with various types of nanoparticles, which are pre-modified with Bovine Serum Albumin (BSA) and subsequently characterized by EDX, TGA, zeta potential measurements and Raman spectroscopy. Cryo-SEM and EDX mapping visualizations show the homogeneous distribution of the densely packed nanoparticles in the capsule shell. In contrast to the results reported in our previous paper,1 the shell of those nanostructured composite microcapsules is not cross-linked by the intermolecular disulfide bonds between BSA molecules. Instead, a Pickering-Emulsion formation takes place because of the amphiphilicity-driven spontaneous attachment of the BSA-modified nanoparticles at the oil/water interface. Using colloidal particles for the formation of the shell of the microcapsules, in our case silica, hydroxyapatite and calcium carbonate nanoparticles, is promising for the creation of new functional materials. The nanoparticulate building blocks of the composite shell with different chemical, physical or morphological properties can contribute to additional, sometimes even multiple, features of the resulting capsules. Microcapsules with shells of densely packed nanoparticles could find interesting applications in pharmaceutical science, cosmetics or in food technology.

A Dual pH- and Light-Responsive Spiropyran-Based Surfactant: Investigations on Its Switching Behavior and Remote Control over Emulsion Stability.

A cationic surfactant containing a spiropyran unit is prepared exhibiting a dual-responsive adjustability of its surface-active characteristics. The switching mechanism of the system relies on the reversible conversion of the non-ionic spiropyran (SP) to a zwitterionic merocyanine (MC) and can be controlled by adjusting the pH value and via light, resulting in a pH-dependent photoactivity: While the compound possesses a pronounced difference in surface activity between both forms under acidic conditions, this behavior is suppressed at a neutral pH level. The underlying switching processes are investigated in detail, and a thermodynamic explanation based on a combination of theoretical and experimental results is provided. This complex stimuli-responsive behavior enables remote-control of colloidal systems. To demonstrate its applicability, the surfactant is utilized for the pH-dependent manipulation of oil-in-water emulsions.

Protein Nanopore Membranes Prepared by a Simple Langmuir-Schaefer Approach.

Filtration through membranes with nanopores is typically associated with high transmembrane pressures and high energy consumption. This problem can be addressed by reducing the respective membrane thickness. Here, a simple procedure is described to prepare ultrathin membranes based on protein nanopores, which exhibit excellent water permeance, two orders of magnitude superior to comparable, industrially applied membranes. Furthermore, incorporation of either closed or open protein nanopores allows tailoring the membrane's ion permeability. To form such membranes, the transmembrane protein ferric hydroxamate uptake protein component A (FhuA) or its open-pore variant are assembled at the air-water interface of a Langmuir trough, compressed to a dense film, crosslinked by glutaraldehyde, and transferred to various support materials. This approach allows to prepare monolayer or multilayer membranes with a very high density of protein nanopores. Freestanding membranes covering holes up to 5 µm in diameter are visualized by atomic force microscopy (AFM), helium ion microscopy, and transmission electron microscopy. AFM PeakForce quantitative nanomechanical property mapping (PeakForce QNM)  demonstrates remarkable mechanical stability and elastic properties of freestanding monolayer membranes with a thickness of only 5 nm. The new protein membrane can pave the way to energy-efficient nanofiltration.

Primary Vitreoretinal Lymphoma Therapy Monitoring: Significant Vitreous Haze Reduction After Intravitreal Rituximab.

BACKGROUND/AIMS: Intravitreal rituximab is an off-label treatment option for primary vitreoretinal lymphoma (PVRL). The objective of this study was to monitor the therapeutic response and safety profile of intravitreal rituximab in a cohort of PVRL patients. METHODS: In this retrospective, uncontrolled, open label, multicentre study, 20 eyes from 15 consecutive patients diagnosed with PRVL received at least one intravitreal injection of 1mg in 0.1ml rituximab. Biodata of the PVRL patients was recorded as well as visual acuity and vitreous haze score immediately before rituximab intravitreal injection and at follow-up examinations. Intravitreal rituximab safety data was also recorded. Additional rituximab injections were made during control visits on a pro re nata (PRN) regime using increased vitreous haze to indicate recurrence. RESULTS: There was significant vitreous haze reduction (p=0.0002) followed by significant improvement of visual acuity (mean best visual acuity before therapy 0.57 logMAR, after therapy 0.20 logMAR (p=0.0228) during the follow-up time up to 4 years. Only mild ocular side effects were reported. Median follow-up time was 565 days (range, 7-1253 days). CONCLUSION: Intravitreal rituximab therapy shows promising PVRL regression without any severe side effects. Although our clinical data support rituximab as intravitreal therapy in PVRL disease, further study is warranted.

Construction of Highly Ordered Glyco-Inside Nano-Assemblies through RAFT Dispersion Polymerization of Galactose-Decorated Monomer.

Glyco-assemblies derived from amphiphilic sugar-decorated block copolymers (ASBCs) have emerged prominently due to their wide application, for example, in biomedicine and as drug carriers. However, to efficiently construct these glyco-assemblies is still a challenge. Herein, we report an efficient technology for the synthesis of glyco-inside nano-assemblies by utilizing RAFT polymerization of a galactose-decorated methacrylate for polymerization-induced self-assembly (PISA). Using this approach, a series of highly ordered glyco-inside nano-assemblies containing intermediate morphologies were fabricated by adjusting the length of the hydrophobic glycoblock and the polymerization solids content. A specific morphology of complex vesicles was captured during the PISA process and the formation mechanism is explained by the morphology of its precursor and intermediate. Thus, this method establishes a powerful route to fabricate glyco-assemblies with tunable morphologies and variable sizes, which is significant to enable the large-scale fabrication and wide application of glyco-assemblies.

Shaping Metallic Nanolattices: Design by Microcontact Printing from Wrinkled Stamps.

A method for the fabrication of well-defined metallic nanostructures is presented here in a simple and straightforward fashion. As an alternative to lithographic techniques, this routine employs microcontact printing utilizing wrinkled stamps, which are prepared from polydimethylsiloxane (PDMS), and includes the formation of hydrophobic stripe patterns on a substrate via the transfer of oligomeric PDMS. Subsequent backfilling of the interspaces between these stripes with a hydroxyl-functional poly(2-vinyl pyridine) then provides the basic pattern for the deposition of citrate-stabilized gold nanoparticles promoted by electrostatic interaction. The resulting metallic nanostripes can be further customized by peeling off particles in a second microcontact printing step, which employs poly(ethylene imine) surface-decorated wrinkled stamps, to form nanolattices. Due to the independent adjustability of the period dimensions of the wrinkled stamps and stamp orientation with respect to the substrate, particle arrays on the (sub)micro-scale with various kinds of geometries are accessible in a straightforward fashion. This work provides an alternative, cost-effective, and scalable surface-patterning technique to fabricate nanolattice structures applicable to multiple types of functional nanoparticles. Being a top-down method, this process could be readily implemented into, e.g., the fabrication of optical and sensing devices on a large scale.

Self-Assembly Behavior of Oppositely Charged Inverse Bipatchy Microcolloids.

A directed attractive interaction between predefined "patchy" sites on the surfaces of anisotropic microcolloids can provide them with the ability to self-assemble in a controlled manner to build target structures of increased complexity. An important step toward the controlled formation of a desired superstructure is to identify reversible electrostatic interactions between patches which allow them to align with one another. The formation of bipatchy particles with two oppositely charged patches fabricated using sandwich microcontact printing is reported. These particles spontaneously self-aggregate in solution, where a diversity of short and long chains of bipatchy particles with different shapes, such as branched, bent, and linear, are formed. Calculations show that chain formation is driven by a combination of attractive electrostatic interactions between oppositely charged patches and the charge-induced polarization of interacting particles.

Mono-patchy zwitterionic microcolloids as building blocks for pH-controlled self-assembly.

A directional molecular interaction between microcolloids can be achieved through pre-defined sites on their surface, "patches", which might make them follow each other in a controlled way and assemble into target structures of more complexity. In this article, we report the successful generation and characterization of mono-patchy melamine-formaldehyde microparticles with oppositely charged patches made of poly(methyl vinyl ether-alt-maleic acid) or polyethyleneimine via microcontact printing. The study of their self-aggregation behavior in solution shows that by change of pH, particle dimers are formed via attractive electrostatic force between the patchy and non-patchy surface of the particles, which reaches its optimum at a specific pH.

Biocatalytically Active Thin Films via Self-Assembly of 2-Deoxy-d-ribose-5-phosphate Aldolase-Poly(N-isopropylacrylamide) Conjugates.

2-Deoxy-d-ribose-5-phosphate aldolase (DERA) is a biocatalyst that is capable of converting acetaldehyde and a second aldehyde as acceptor into enantiomerically pure mono- and diyhydroxyaldehydes, which are important structural motifs in a number of pharmaceutically active compounds. However, substrate as well as product inhibition requires a more-sophisticated process design for the synthesis of these motifs. One way to do so is to the couple aldehyde conversion with transport processes, which, in turn, would require an immobilization of the enzyme within a thin film that can be deposited on a membrane support. Consequently, we developed a fabrication process for such films that is based on the formation of DERA-poly(N-isopropylacrylamide) conjugates that are subsequently allowed to self-assemble at an air-water interface to yield the respective film. In this contribution, we discuss the conjugation conditions, investigate the interfacial properties of the conjugates, and, finally, demonstrate a successful film formation under the preservation of enzymatic activity.

Magnetic Field-Induced Assembly of Superparamagnetic Cobalt Nanoparticles on Substrates and at Liquid-Air Interface.

Superparamagnetic cobalt nanoparticles (Co NPs) are an interesting material for self-assembly processes because of their magnetic properties. We investigated the magnetic field-induced assembly of superparamagnetic cobalt nanoparticles and compared three different approaches, namely, the assembly on solid substrates, at water-air, and ethylene glycol-air interfaces. Oleic acid- and trioctylphosphine oxide-coated Co NPs were synthesized via a thermolysis of cobalt carbonyl and dispersed into either hexane or toluene. The Co NP dispersion was dropped onto different substrates (e.g., transmission electron microscopy (TEM) grid, silicon wafer) and onto liquid surfaces. Transmission electron microscopy (TEM), scanning force microscopy, optical microscopy, as well as scanning electron microscopy showed that superparamagnetic Co NPs assembled into one-dimensional chains in an external magnetic field. By varying the concentration of the Co NP dispersion (1-5 mg/mL) and the strength of the magnetic field (4-54 mT), the morphology of the chains changed. Short, thin, and flexible chain structures were obtained at low NP concentration and low strength of magnetic field, whereas they became long, thick and straight when the NP concentration and the magnetic field strength increased. In comparison, the assembly of Co NPs from hexane dispersion at ethylene glycol-air interface showed the most regular and homogeneous alignment, since a more efficient spreading could be achieved on ethylene glycol than on water and solid substrates.

From 2D to 3D patches on multifunctional particles: how microcontact printing creates a new dimension of functionality.

A straightforward approach for the precise multifunctional surface modification of particles with three-dimensional patches using microcontact printing is presented. By comparison to previous works it was possible to not only control the diameter, but also to finely tune the thickness of the deposited layer, opening up the way for three-dimensional structures and orthogonal multifunctionality. The use of PEI as polymeric ink, PDMS stamps for microcontact printing on silica particles and the influence of different solvents during particle release on the creation of functional particles with three-dimensional patches are described. Finally, by introducing fluorescent properties by incorporation of quantum dots into patches and by particle self-assembly via avidin-biotin coupling, the versatility of this novel modification method is demonstrated.

Physical Polyurethane Hydrogels via Charge Shielding through Acids or Salts.

Physical hydrogels with tunable stress-relaxation and excellent stress recovery are formed from anionic polyurethanes via addition of acids, monovalent salts, or divalent salts. Gel properties can be widely adjusted through pH, salt valence, salt concentration, and monomer composition. We propose and investigate a novel gelation mechanism based on a colloidal system interacting through charge repulsion and chrage shielding, allowing a broad use of the material, from acidic (pH 4-5.5) to pH-neutral hydrogels with Young's moduli ranging from 10 to 140 kPa.

Neoadjuvant proton beam irradiation vs. adjuvant ruthenium brachytherapy in transscleral resection of uveal melanoma.

BACKGROUND: Uveal melanoma is the most common primary ocular malignancy in adults in the USA and Europe. The optimal treatment of large uveal melanoma is still under debate. Radiation therapy has its limitation due its eye-threatening secondary complications and is therefore often combined with surgical excision of the tumor. METHODS: In a retrospective interventional review, we evaluated in total 242 patients with uveal melanoma that underwent transscleral tumor resection with a predefined protocol, either with adjuvant ruthenium brachytherapy (Ru-106 group, n 136,), or with neoadjuvant proton beam therapy (PBT group, n 106). Kaplan-Meier estimates with log-rank test were used to show survival curves and a multivariable Cox regression model was used to calculate adjusted rate ratios. RESULTS: Local tumor recurrence rates after 3 and 5 years were 4% (95% CI 1.2-17.8%) and 9.1% (95% CI 2.9-27.3%), respectively, in the PBT group and 24.6% (95% CI 15.8-37.1%) and 27.5 (95% CI 17.8-41.1%), respectively, in the Ru-106 group. This leads to an overall recurrence rate almost 4 times higher in the Ru-106 group compared to the PBT group. After adjusting for the a priori confounders and the tumor distance to optic disc and ciliary body infiltration, the adjusted risk of tumor recurrence was 8 times (RR 7.69 (2.22-26.06), p < 0.001) higher in the Ru-106 group as compared to the PBT group. Three- and 5-year metastatic rates were 23.2% (95% CI 5.6-37.1%) and 31.8% (95% CI 20.7-46.8%), respectively, in the PBT group and 13.2% (95% CI 6.8-24.9%) and 30.3% (95% CI 18.3-47.5%), respectively, in the Ru-106 group. There was no statistically significant difference in the overall metastasis rate between the two groups even after adjusting for possible confounders. CONCLUSION: Transscleral resection of large uveal melanomas combined with neoadjuvant proton beam therapy leads to a lower local tumor recurrence rate compared to transscleral tumor resection with adjuvant ruthenium brachytherapy. There was no statistically significant difference in the occurrence of rubeosis iridis, neovascular glaucoma, and in the need for enucleation later on.

[Peripheral Ischemia in Diabetic Retinopathy and Retinal Vein Occlusion: New Insights with Ultra-Wide-Angle Fundus Imaging and Wide-Angle Fluorescein Angiography]. / Periphere Ischämie bei diabetischer Retinopathie und retinalen Venenthrombosen: neue Einblicke durch die Ultraweitwinkelfundusfotografie und Weitwinkelangiografie.

BACKGROUND: In several diseases such as diabetic retinopathy and retinal vein occlusion, relevant pathophysiological changes take place in the retinal periphery. These changes may determine the prognosis and outcomes of therapy. Recent ultra-wide-angle camera systems promise improved and simplified visualisation of the outer periphery of the retina. This could potentially lead to novel clinical applications of these methods, with potential impact on therapy decisions. MATERIAL AND METHODS: Literature and database research on ultra-wide imaging for diabetic retinopathy and retinal vein occlusion. RESULTS: With ultra-wide-angle angiography, it is possible to visualise up to 3.2-fold more retinal surface than conventional 7SF images (7SF: 7 standard field). Initial studies imply that diabetic changes can be found outside of the boundaries of the 7SF images. Patients with central vein occlusion have more extended and severe macular oedema and poorer visual acuity if ischemia of the periphery is more pronounced (measured by the ischemic index [ISI]). The amount of ischemia influences the size of the macular oedema, its resolution under therapy and the number of anti-VEGF injections needed to treat it. DISCUSSION: Ultra-wide-angle camera systems allow visualisation of the peripheral retina outside the boundaries of standard methods. Initial studies have detected potentially relevant changes in the outer periphery, which would have been missed by 7SF. Nevertheless, there have been no systematic studies on the relevance of these changes with regards to prognosis and therapeutic decisions.

Enzyme-Polymer Conjugates as Robust Pickering Interfacial Biocatalysts for Efficient Biotransformations and One-Pot Cascade Reactions.

Despite the rapid development of Pickering interfacial catalysis (PIC) at liquid-liquid interfaces with chemocatalysts, the use of unstable biocatalysts at emulsion interfaces remains a technical challenge. Herein, we present a Pickering interfacial biocatalysis (PIB) platform based on robust and recyclable enzyme-polymer conjugates that act as both catalytic sites and stabilizers at the interface of Pickering emulsions. The conjugates were prepared by growing poly(N-isopropylacrylamide) on a fragile enzyme, benzaldehyde lyase, under physiological conditions. The mild in situ conjugation process preserved the enzyme structure, and the conjugates were used to emulsify a water-organic two-phase system into a stable Pickering emulsion, leading to a significantly larger interfacial area and a 270-fold improvement in catalytic performance as compared to the unemulsified two-phase system. The PIB system could be reused multiple times. Conjugates of other enzymes were also fabricated and applied for cascade reactions.

Controlled Gold Nanorod Reorientation and Hexagonal Order in Micromolded Gold Nanorod@pNIPAM Microgel Chain Arrays.

A one-step soft lithography based pathway to manufacture aligned gold nanorod@poly-(N-isopropylacrylamide) (GNR@pNIPAM) hybrid chains with hexagonal arrangement of the nanorods and with an anisotropic optical response is presented. After demonstration of an efficient synthesis protocol, yielding uniform composite microgels in high concentration, a micromolding procedure using wrinkled polydimethylsiloxane (PDMS) templates to fabricate aligned hybrid chains is introduced. It is found that the self-assembled GNR@pNIPAM microgels inside the PDMS wrinkle grooves can be transferred onto solid substrates, on which they exhibit a hexagonal order, as confirmed by small-angle X-ray scattering. Further, it is shown that the application of minimized PDMS wrinkle dimensions aligns GNRs inside the pNIPAM microgels, and that the optical response of such molded assemblies is anisotropic.