RESUMO
Antibiotic resistance is now one of the biggest threats humankind is facing, as highlighted in a declaration by the General Assembly of the United Nations in 2016. In particular, the growing resistance rates of Gram-negative bacteria cause increasing concerns. The occurrence of the easily transferable, plasmid-encoded mcr-1 colistin resistance gene further worsened the situation, significantly enhancing the risk of the occurrence of pan-resistant bacteria. There is therefore a strong demand for new rapid molecular diagnostic tests for the detection of mcr-1 gene-associated colistin resistance. Electrochemical impedance spectroscopy (EIS) is a well-suited method for rapid antimicrobial resistance detection as it enables rapid, label-free target detection in a cost-efficient manner. Here, we describe the development of an EIS-based mcr-1 gene detection test, including the design of mcr-1-specific peptide nucleic acid probes and assay specificity optimization through temperature-controlled real-time kinetic EIS measurements. A new flow cell measurement setup enabled for the first time detailed real-time, kinetic temperature-controlled hybridization and dehybridization studies of EIS-based nucleic acid biosensors. The temperature-controlled EIS setup allowed single-nucleotide polymorphism discrimination. Target hybridization at 60 °C enhanced the perfect match/mismatch (PM/MM) discrimination ratio from 2.1 at room temperature to 3.4. A hybridization and washing temperature of 55 °C further increased the PM/MM discrimination ratio to 5.7 by diminishing the mismatch signal during the washing step while keeping the perfect match signal. This newly developed mcr-1 gene detection test enabled the direct, specific label, and amplification-free detection of mcr-1 gene harboring plasmids from Escherichia coli.
Assuntos
Técnicas Biossensoriais , Proteínas de Escherichia coli , Antibacterianos/farmacologia , Colistina/farmacologia , Espectroscopia Dielétrica , Farmacorresistência Bacteriana/genética , Proteínas de Escherichia coli/genética , Testes de Sensibilidade Microbiana , Plasmídeos , TemperaturaRESUMO
AIMS: Patients on antituberculosis (anti-TB) therapy are at risk of drug-induced liver injury (DILI). MicroRNA-122 (miR-122) and cytokeratin-18 (K18) are DILI biomarkers. To explore their utility in this global context, circulating miR-122 and K18 were measured in UK and Ugandan populations on anti-TB therapy for mycobacterial infection. METHODS: Healthy subjects and patients receiving anti-TB therapy were recruited at the Royal Infirmary of Edinburgh, UK (ALISTER-ClinicalTrials.gov Identifier: NCT03211208). African patients with human immunodeficiency virus-TB coinfection were recruited at the Infectious Diseases Institute, Kampala, Uganda (SAEFRIF-NCT03982277). Serial blood samples, demographic and clinical data were collected. In ALISTER samples, MiR-122 was quantified using polymerase chain reaction. In ALISTER and SAEFRIF samples, K18 was quantified by enzyme-linked immunosorbent assay. RESULTS: The study had 235 participants (healthy volunteers [n = 28]; ALISTER: active TB [n = 30], latent TB [n = 88], nontuberculous mycobacterial infection [n = 25]; SAEFRIF: human immunodeficiency virus-TB coinfection [n = 64]). In the absence of DILI, there was no difference in miR-122 and K18 across the groups. Both miR-122 and K18 correlated with alanine transaminase (ALT) activity (miR-122: R = .52, 95%CI = 0.42-0.61, P < .0001. K18: R =0.42, 95%CI = 0.34-0.49, P < .0001). miR-122 distinguished those patients with ALT>50 U/L with higher sensitivity/specificity than K18. There were 2 DILI cases: baseline ALT, 18 and 28 IU/L, peak ALT 431 and 194 IU/L; baseline K18, 58 and 219 U/L, peak K18 1247 and 3490 U/L; baseline miR-122 4 and 17 fM, peak miR-122 60 and 336 fM, respectively. CONCLUSION: In patients treated with anti-TB therapy, miR-122 and K18 correlated with ALT and increased with DILI. Further work should determine their diagnostic and prognostic utility in this global context-of-use.
Assuntos
Doença Hepática Induzida por Substâncias e Drogas , MicroRNAs , Biomarcadores , Doença Hepática Induzida por Substâncias e Drogas/etiologia , Humanos , Queratina-18 , Uganda/epidemiologiaRESUMO
Rapid point of care tests for bacterial infection diagnosis are of great importance to reduce the misuse of antibiotics and burden of antimicrobial resistance. Here, we have successfully combined a new class of non-biological binder molecules with electrochemical impedance spectroscopy (EIS)-based sensor detection for direct, label-free detection of Gram-positive bacteria making use of the specific coil-to-globule conformation change of the vancomycin-modified highly branched polymers immobilized on the surface of gold screen-printed electrodes upon binding to Gram-positive bacteria. Staphylococcus carnosus was detected after just 20 min incubation of the sample solution with the polymer-functionalized electrodes. The polymer conformation change was quantified with two simple 1 min EIS tests before and after incubation with the sample. Tests revealed a concentration dependent signal change within an OD600 range of Staphylococcus carnosus from 0.002 to 0.1 and a clear discrimination between Gram-positive Staphylococcus carnosus and Gram-negative Escherichia coli bacteria. This exhibits a clear advancement in terms of simplified test complexity compared to existing bacteria detection tests. In addition, the polymer-functionalized electrodes showed good storage and operational stability.
Assuntos
Técnicas Biossensoriais , Vancomicina , Bactérias , Espectroscopia Dielétrica , Técnicas Eletroquímicas , Eletrodos , Ouro , Polímeros , StaphylococcusRESUMO
Cell-based biosensors offer cheap, portable and simple methods of detecting molecules of interest but have yet to be truly adopted commercially. Issues with their performance and specificity initially slowed the development of cell-based biosensors. With the development of rational approaches to tune response curves, the performance of biosensors has rapidly improved and there are now many biosensors capable of sensing with the required performance. This has stimulated an increased interest in biosensors and their commercial potential. However the reliability, long term stability and biosecurity of these sensors are still barriers to commercial application and public acceptance. Research into overcoming these issues remains active. Here we present the state-of-the-art tools offered by synthetic biology to allow construction of cell-based biosensors with customisable performance to meet the real world requirements in terms of sensitivity and dynamic range and discuss the research progress to overcome the challenges in terms of the sensor stability and biosecurity fears.
Assuntos
Bactérias/citologia , Técnicas Biossensoriais , Engenharia Celular , Biologia Sintética , Técnicas Biossensoriais/instrumentação , HumanosRESUMO
The front cover artwork is provided by the group of Dr. Baojun Wang (The University of Edinburgh). The image shows an engineered bacterial cell containing a genetic amplifier circuit which transforms a weak input signal into a larger easily detectable output signal. The electronics symbols used to illustrate the genetic circuit highlight the programmability of the circuit components enabled by state-of-the-art synthetic biology tools. Read the full text of the Review at 10.1002/cphc.201900739.
Assuntos
Bactérias/citologia , Engenharia Celular , Eletrônica , Ilustração Médica , Biologia Sintética , HumanosRESUMO
The emergence and spread of antimicrobial resistance is one of the major global issues currently threatening the health and wealth of nations, with effective guidelines and intervention strategies urgently required. Such guidelines and interventions should ideally be targeted at individuals, communities, and nations, requiring international coordination for maximum effect. In this respect, the European Joint Programming Initiative on Antimicrobial Resistance Transnational Working Group 'Antimicrobial Resistance - Rapid Diagnostic Tests' (JPIAMR AMR-RDT) is proposing to consider a 'mix-and-match' package for the implementation of point-of-care testing (PoCT), which is described in this publication. The working group was established with the remit of identifying barriers and solutions to the development and implementation of rapid infectious disease PoCT for combatting the global spread of antimicrobial resistance. It constitutes a multi-sectoral collaboration between medical, technological, and industrial opinion leaders involved in in vitro diagnostics development, medical microbiology, and clinical infectious diseases. The mix-and-match implementation package is designed to encourage the implementation of rapid infectious disease and antimicrobial resistance PoCT in transnational medical environments for use in the fight against increasing antimicrobial resistance.
Assuntos
Antibacterianos/farmacologia , Doenças Transmissíveis/diagnóstico , Comportamento Cooperativo , Farmacorresistência Bacteriana , Testes Imediatos , Antibacterianos/uso terapêutico , Doenças Transmissíveis/tratamento farmacológico , Testes Diagnósticos de Rotina/tendências , Pessoal de Saúde , Humanos , Sistemas Automatizados de Assistência Junto ao Leito/organização & administração , Sistemas Automatizados de Assistência Junto ao Leito/tendências , Testes Imediatos/tendências , Saúde PúblicaRESUMO
For analytical applications involving label-free biosensors and multiple measurements, i.e., across an electrode array, it is essential to develop complete sensor systems capable of functionalization and of producing highly consistent responses. To achieve this, a multi-microelectrode device bearing twenty-four equivalent 50 µm diameter Pt disc microelectrodes was designed in an integrated 3-electrode system configuration and then fabricated. Cyclic voltammetry and electrochemical impedance spectroscopy were used for initial electrochemical characterization of the individual working electrodes. These confirmed the expected consistency of performance with a high degree of measurement reproducibility for each microelectrode across the array. With the aim of assessing the potential for production of an enhanced multi-electrode sensor for biomedical use, the working electrodes were then functionalized with 6-mercapto-1-hexanol (MCH). This is a well-known and commonly employed surface modification process, which involves the same principles of thiol attachment chemistry and self-assembled monolayer (SAM) formation commonly employed in the functionalization of electrodes and the formation of biosensors. Following this SAM formation, the reproducibility of the observed electrochemical signal between electrodes was seen to decrease markedly, compromising the ability to achieve consistent analytical measurements from the sensor array following this relatively simple and well-established surface modification. To successfully and consistently functionalize the sensors, it was necessary to dilute the constituent molecules by a factor of ten thousand to support adequate SAM formation on microelectrodes. The use of this multi-electrode device therefore demonstrates in a high throughput manner irreproducibility in the SAM formation process at the higher concentration, even though these electrodes are apparently functionalized simultaneously in the same film formation environment, confirming that the often seen significant electrode-to-electrode variation in label-free SAM biosensing films formed under such conditions is not likely to be due to variation in film deposition conditions, but rather kinetically controlled variation in the SAM layer formation process at these microelectrodes.
RESUMO
This article reviews existing clinical practices and sensor research undertaken to monitor fetal well-being during labour. Current clinical practices that include fetal heart rate monitoring and fetal scalp blood sampling are shown to be either inadequate or time-consuming. Monitoring of lactate in blood is identified as a potential alternative for intrapartum fetal monitoring due to its ability to distinguish between different types of acidosis. A literature review from a medical and technical perspective is presented to identify the current advancements in the field of lactate sensors for this application. It is concluded that a less invasive and a more continuous monitoring device is required to fulfill the clinical needs of intrapartum fetal monitoring. Potential specifications for such a system are also presented in this paper.
Assuntos
Acidose/diagnóstico , Hipóxia Fetal/diagnóstico , Monitorização Fetal/instrumentação , Trabalho de Parto , Feminino , Humanos , Ácido Láctico/sangue , Gravidez , Couro CabeludoRESUMO
The alarming rate at which antibiotic resistance is occurring in human pathogens causes a pressing need for improved diagnostic technologies aimed at rapid detection and point-of-care testing to support quick decision making regarding antibiotic therapy and patient management. Here, we report the successful development of an electrochemical biosensor to detect bla(NDM), the gene encoding the emerging New Delhi metallo-beta-lactamase, using label-free electrochemical impedance spectroscopy (EIS). The presence of this gene is of critical concern because organisms harboring bla(NDM) tend to be multiresistant, leaving very few treatment options. For the EIS assay, we used a bla(NDM)-specific PNA probe that was designed by applying a new approach that combines in silico probe design and fluorescence-based DNA microarray validation with electrochemical testing on gold screen-printed electrodes. The assay was successfully demonstrated for synthetic targets (LOD = 10 nM), PCR products (LOD = 100 pM), and direct, amplification-free detection from a bla(NDM)-harboring plasmid. The biosensor's specificity, preanalytical requirements, and performance under ambient conditions were demonstrated and successfully proved its suitability for further point-of-care test development.
Assuntos
Técnicas de Tipagem Bacteriana/métodos , Técnicas Eletroquímicas , Infecções por Enterobacteriaceae/microbiologia , Enterobacteriaceae/enzimologia , Enterobacteriaceae/genética , beta-Lactamases/genética , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Carbapenêmicos/farmacologia , Farmacorresistência Bacteriana Múltipla/genética , Enterobacteriaceae/classificação , Enterobacteriaceae/efeitos dos fármacos , Infecções por Enterobacteriaceae/tratamento farmacológico , Humanos , Análise Serial de Proteínas , Fatores de TempoRESUMO
Hybridization of complementary nucleic acid strands is fundamental to nearly all molecular bioanalytical methods ranging from polymerase chain reaction and DNA biosensors to next generation sequencing. For nucleic acid amplification methods, controlled DNA denaturation and renaturation is particularly essential and achieved by cycling elevated temperatures. Although this is by far the most used technique, the management of rapid temperature changes requires bulky instrumentation and intense power supply. These factors so far precluded the development of true point-of-care tests for molecular diagnostics. To overcome this limitation we explored the possibility of using electrochemical means to control reversible DNA hybridization by using the electroactive intercalator daunomycin (DM). We show that redox-state switching of DM altered its properties from DNA binding to nonbinding, under otherwise constant conditions, and thus altered the thermodynamic stability of duplex DNA. The operational principle was demonstrated using complementary synthetic 20mer and 40mer DNA oligonucleotides. Absorbance-based melting curve analysis revealed significantly higher melting temperatures for DNA in the presence of oxidized compared to chemically reduced DM. This difference was exploited to drive cyclic electrochemically controlled denaturation and renaturation. Analysis with in situ UV-vis and circular dichroism spectroelectrochemistry, as two independent techniques, indicated that up to 80% of the DNA was reversibly hybridized. This remarkable demonstration of electrochemical control of five cycles of DNA denaturation and renaturation, under otherwise constant conditions, could have wide-ranging implications for the future development of miniaturized analytical systems for molecular diagnostics and beyond.
Assuntos
DNA/química , Daunorrubicina/química , Estrutura Molecular , Técnicas de Amplificação de Ácido Nucleico , Desnaturação de Ácido Nucleico , Oxirredução , TemperaturaRESUMO
Systematic evolution of ligands by exponential enrichment (SELEX) is an efficient method to identify aptamers; however, it sometimes fails to identify aptamers that bind to their target with high affinity. Thus, post-SELEX optimization of aptamers is required to improve aptamer binding affinity. We developed in silico maturation based on a genetic algorithm (1) as an efficient mutagenesis method to improve aptamer binding affinity. In silico maturation was performed to improve a VEGF-binding DNA aptamer (VEap121). The VEap121 aptamer is considered to fold into a G-quadruplex structure and this structure may be important for VEGF recognition. Using in silico maturation, VEap121 was mutated with the exception of the guanine tracts that are considered to form the G-quartet. As a result, four aptamers were obtained that showed higher affinity compared with VEap121. The dissociation constant (K(d)) of the most improved aptamer (3R02) was 300 pM. The affinity of 3R02 was 16-fold higher than that of VEap121. Moreover, a bivalent aptamer was constructed by connecting two identical 3R02s through a 10-mer thymine linker for further improvement of affinity. The bivalent aptamer (3R02 Bivalent) bound to VEGF with a K(d) value of 30 pM. Finally, by constructing a VEGF-detection system using a VEGF antibody as the capture molecule and monovalent 3R02 as the detection molecule, a more sensitive assay was developed compared with the system using VEap121. These results indicate that in silico maturation could be an efficient method to improve aptamer affinity for construction of sensitive detection systems.
Assuntos
Aptâmeros de Nucleotídeos/química , Fator A de Crescimento do Endotélio Vascular/análise , Dicroísmo Circular , Humanos , Proteínas Recombinantes/análise , Sensibilidade e Especificidade , Ressonância de Plasmônio de SuperfícieRESUMO
Drug-induced liver injury (DILI) is a major challenge in clinical medicine and drug development. There is a need for rapid diagnostic tests, ideally at point-of-care. MicroRNA 122 (miR-122) is an early biomarker for DILI which is reported to increase in the blood before standard-of-care markers such as alanine aminotransferase activity. We developed an electrochemical biosensor for diagnosis of DILI by detecting miR-122 from clinical samples. We used electrochemical impedance spectroscopy (EIS) for direct, amplification free detection of miR-122 with screen-printed electrodes functionalised with sequence specific peptide nucleic acid (PNA) probes. We studied the probe functionalisation using atomic force microscopy and performed elemental and electrochemical characterisations. To enhance the assay performance and minimise sample volume requirements, we designed and characterised a closed-loop microfluidic system. We presented the EIS assay's specificity for wild-type miR-122 over non-complementary and single nucleotide mismatch targets. We successfully demonstrated a detection limit of 50 pM for miR-122. Assay performance could be extended to real samples; it displayed high selectivity for liver (miR-122 high) comparing to kidney (miR-122 low) derived samples extracted from murine tissue. Finally, we successfully performed an evaluation with 26 clinical samples. Using EIS, DILI patients were distinguished from healthy controls with a ROC-AUC of 0.77, a comparable performance to qPCR detection of miR-122 (ROC-AUC: 0.83). In conclusion, direct, amplification free detection of miR-122 using EIS was achievable at clinically relevant concentrations and in clinical samples. Future work will focus on realising a full sample-to-answer system which can be deployed for point-of-care testing.
Assuntos
Técnicas Biossensoriais , Doença Hepática Induzida por Substâncias e Drogas , MicroRNA Circulante , MicroRNAs , Humanos , Camundongos , Animais , Técnicas Biossensoriais/métodos , Testes Imediatos , Sistemas Automatizados de Assistência Junto ao Leito , Doença Hepática Induzida por Substâncias e Drogas/diagnóstico , Técnicas Eletroquímicas , MicroRNAs/análiseRESUMO
Diagnostics are widely considered crucial in the fight against antimicrobial resistance (AMR), which is expected to kill 10 million people annually by 2030. Nevertheless, there remains a substantial gap between the need for AMR diagnostics versus their development and implementation. To help address this problem, target product profiles (TPP) have been developed to focus developers' attention on the key aspects of AMR diagnostic tests. However, during discussion between a multisectoral working group of 51 international experts from industry, academia and healthcare, it was noted that specific AMR-related TPPs could be extended by incorporating the interdependencies between the key characteristics associated with the development of such TPPs. Subsequently, the working group identified 46 characteristics associated with six main categories (ie, Intended Use, Diagnostic Question, Test Description, Assay Protocol, Performance and Commercial). The interdependencies of these characteristics were then identified and mapped against each other to generate new insights for use by stakeholders. Specifically, it may not be possible for diagnostics developers to achieve all of the recommendations in every category of a TPP and this publication indicates how prioritising specific TPP characteristics during diagnostics development may influence (or not) a range of other TPP characteristics associated with the diagnostic. The use of such guidance, in conjunction with specific TPPs, could lead to more efficient AMR diagnostics development.
Assuntos
Testes Diagnósticos de Rotina , Resistência Microbiana a Medicamentos , Humanos , Testes Diagnósticos de Rotina/métodosRESUMO
Antibiotic resistance among pathogenic microorganisms is emerging as a major human healthcare concern. While there are a variety of resistance mechanisms, many can be related to single nucleotide polymorphisms and for which DNA microarrays have been widely deployed in bacterial genotyping. However, genotyping by means of allele-specific hybridization can suffer from the drawback that oligonucleotide probes with different nucleotide composition have varying thermodynamic parameters. This results in unpredictable hybridization behavior of mismatch probes. Consequently, the degree of discrimination between perfect match and mismatch probes is insufficient in some cases. We report here an on-chip enzymatic procedure to improve this discrimination in which false-positive hybrids are selectively digested. We find that the application of CEL1 Surveyor nuclease, a mismatch-specific endonuclease, significantly enhances the discrimination fidelity, as demonstrated here on a microarray for the identification of variants of carbapenem resistant Klebsiella pneumoniae carbapenemases and monitored by end point detection of fluorescence intensity. Further fundamental investigations applying total internal reflection fluorescence detection for kinetic real-time measurements confirmed the enzymatic enhancement for SNP discrimination.
Assuntos
Artefatos , Proteínas de Bactérias/genética , Técnicas de Tipagem Bacteriana/métodos , Klebsiella pneumoniae/isolamento & purificação , Análise de Sequência com Séries de Oligonucleotídeos/métodos , beta-Lactamases/genética , Proteínas de Bactérias/química , Pareamento Incorreto de Bases , Endonucleases/metabolismo , Fluorescência , Genótipo , Klebsiella pneumoniae/genética , Hibridização de Ácido Nucleico , Sondas de Oligonucleotídeos/química , Polimorfismo de Nucleotídeo Único , Espectrometria de Fluorescência , Termodinâmica , Resistência beta-Lactâmica/genética , beta-Lactamases/químicaRESUMO
Klebsiella pneumoniae carbapenemases (KPCs) are considered a serious threat to antibiotic therapy, as they confer resistance to carbapenems, which are used to treat extended-spectrum beta-lactamase (ESBL)-producing bacteria. Here, we describe the development and evaluation of a DNA microarray for the detection and genotyping of KPC genes (bla(KPC)) within a 5-h period. To test the whole assay procedure (DNA extraction plus a DNA microarray assay) directly from clinical specimens, we compared two commercial DNA extraction kits (the QIAprep Spin miniprep kit [Qiagen] and the urine bacterial DNA isolation kit [Norgen]) for the direct DNA extraction from urine samples (dilution series spiked in human urine). Reliable single nucleotide polymorphism (SNP) typing was demonstrated using 1 × 10(5) CFU/ml urine for Escherichia coli (Qiagen and Norgen) and 80 CFU/ml urine, on average, for K. pneumoniae (Norgen). This study presents, for the first time, the combination of a new KPC microarray with commercial sample preparation for detecting and genotyping microbial pathogens directly from clinical specimens; this paves the way toward tests providing epidemiological and diagnostic data, enabling better antimicrobial stewardship.
Assuntos
Proteínas de Bactérias/genética , Infecções por Enterobacteriaceae/microbiologia , Klebsiella pneumoniae/enzimologia , Análise de Sequência com Séries de Oligonucleotídeos/métodos , Urina/microbiologia , beta-Lactamases/genética , Escherichia coli , Humanos , Klebsiella pneumoniae/genética , Klebsiella pneumoniae/isolamento & purificaçãoRESUMO
Enzymatic signal amplification by the deposition of insoluble product on the electrode surface enhances impedimetric DNA detection sensitivity. This work demonstrates a method which gives the required detection sensitivity at significantly reduced enzyme reaction times, and demonstrates the capability for DNA SNP discrimination of biologically relevant sequences. This opens up the prospect of more rapid and relevant multiparameter impedimetric bioassays.
Assuntos
Fosfatase Alcalina , Técnicas Biossensoriais/métodos , DNA/análise , Técnicas Eletroquímicas/métodos , Fosfatase Alcalina/química , Fosfatase Alcalina/metabolismo , DNA/química , Sensibilidade e Especificidade , Fatores de TempoRESUMO
This study presents a new strategy and level of mechanistic understanding for ultrasensitive detection of short, non-coding RNAs without target amplification or chemical modification using electrochemical biosensors. Electrochemical impedance spectroscopy (EIS) has been used for probe target interaction detection because of its high utility for sensitive and label-free measurements of the nucleic acid targets as a result of hybridisation. EIS measurements of different probe target combinations in a range of spatial orientations and sequence overlaps showed that bringing the target overhangs closer to the nanometer proximity of the electrode surface improved the EIS signal significantly. Systematic investigations using different lengths of overhangs towards the electrode surface revealed proportionally higher EIS signals with increasing lengths of the overhangs. Our observations could be explained using the Poisson-Boltzmann and Gouy-Chapman model and followed our experimental modelling. In conclusion, the optimized arrangements of our EIS biosensor system enabled us to detect microRNA-122, a known biomarker for liver injury, as well as three common isoforms to a 1 nM (equivalent to 80 fmole) detection limit. This will enable us to develop solutions for the detection of this important blood biomarker at point of care.
Assuntos
Técnicas Biossensoriais , MicroRNAs , Técnicas Biossensoriais/métodos , Espectroscopia Dielétrica , Técnicas Eletroquímicas , Eletrodos , Limite de Detecção , Hibridização de Ácido NucleicoRESUMO
We present the development of electrochemical impedance spectroscopy (EIS)-based biosensors for sensitive detection of SARS-CoV-2 RNA using multi-valent binding. By increasing the number of probe-target binding events per target molecule, multi-valent binding is a viable strategy for improving the biosensor performance. As EIS can provide sensitive and label-free measurements of nucleic acid targets during probe-target hybridization, we used multi-valent binding to build EIS biosensors for targeting SARS-CoV-2 RNA. For developing the biosensor, we explored two different approaches including probe combinations that individually bind in a single-valent fashion and the probes that bind in a multi-valent manner on their own. While we found excellent biosensor performance using probe combinations, we also discovered unexpected signal suppression. We explained the signal suppression theoretically using inter- and intra-probe hybridizations which confirmed our experimental findings. With our best probe combination, we achieved a LOD of 182 copies/µL (303 aM) of SARS-CoV-2 RNA and used these for successful evaluation of patient samples for COVID-19 diagnostics. We were also able to show the concept of multi-valent binding with shorter probes in the second approach. Here, a 13-nt-long probe has shown the best performance during SARS-CoV-2 RNA binding. Therefore, multi-valent binding approaches using EIS have high utility for direct detection of nucleic acid targets and for point-of-care diagnostics.
Assuntos
COVID-19 , SARS-CoV-2 , Humanos , SARS-CoV-2/genética , COVID-19/diagnóstico , RNA Viral/genética , Hibridização de Ácido NucleicoRESUMO
The population of methicillin-resistant (MR) staphylococci in aquatic environment is rarely investigated. Here, we characterized a collection of MR staphylococci recovered from shrimp aquaculture farms (n = 37) in Kerala, India. A total of 261 samples yielded 47 MR isolates (16 S. aureus, 13 S. haemolyticus, 11 S. epidermidis, 3 S. saprophytics and 2 each of S.intermedius and S. kloosii). Multi-drug resistance was evident in 72.3% of the isolates, with resistance mainly towards erythromycin (78.7%), norfloxacin and trimethoprim-sulfamethoxazole (53.2%), and gentamicin (34%). Major resistance genes identified included mecA (100%), ermC (38.3%), aacA-aphD (21.3%), tetK (14.9%) and tetM (21.3%). Almost 60% of the isolates carried type V SCCmec (Staphylococcal Cassette Chromosome mec), and the remaining harboured untypeable SCCmec elements. Comprehensive genotyping of the methicillin-resistant Staphylococcus aureus isolates revealed high prevalence of ST772-t345-V (sequence type-spa type-SCCmec type) (75%), followed by minor representations of ST6657-t345-V and ST3190-t12353. The isolates of S. haemolyticus and S. epidermidis were genotypically diverse as shown by their pulsed-field gel electrophoresis (PFGE) profiles. Genes encoding staphylococcal enterotoxins were observed in 53.2% of the isolates. Various genes involved in adhesion and biofilm formation were also identified. In conclusion, our findings provide evidence that shrimp aquaculture settings can act as reservoirs of methicillin-resistant staphylococci.