Development of Aggregation-Caused Quenching Probe-Loaded Pressurized Metered-Dose Inhalers with Fluorescence Tracking Potentials.

Recently, pressurized metered-dose inhalers (pMDIs) are getting more attention as an effective approach of pulmonary drug delivery, and nanoparticle-based formulations have become a new generation of pMDIs, especially for water insoluble drugs. Up until now, there is no clinical application of nanoparticle-based pMDIs. The main hurdle remains in the lack of knowledge of the in vivo fate of those systems. In this study, a fluorescent probe named P4 with aggregation-caused quenching (ACQ) effect was loaded in the nanoparticle-based pMDIs to track the in vivo fate. P4 probe expressed strong fluorescence when distributed in intact nanoparticles, but quenched in the in vivo aqueous environment due to molecular aggregation. Experimentally, P4 probe was encapsulated into solid lipid nanoparticles (SLN) as P4-SLN, and then, the formulation of pMDIs was optimized. The content (w/w) of the optimal formulation (P4-SLN-pMDIs) was as follows: 6.02% Pluronic® L64, 12.03% ethanol, 0.46% P4-SLN, and 81.49% 1,1,1,2-tetrafluoroethane (HFA-134a). P4-SLN-pMDI was transparent in appearance, possessed a particle size of 132.07 ± 3.56 nm, and the fine particle fraction (FPF) was 39.53 ± 1.94%, as well good stability was shown within 10 days. The results indicated P4-SLN-pMDI was successfully prepared. Moreover, the ACQ property of P4-SLN-pMDIs was verified, which ensured the fluorescence property as a credible tool for in vivo fate study. Taken together, this work established a platform that could provide a firm theoretical support for exploration of the in vivo fate of nanoparticle-based pMDIs in subsequent studies. Grapical abstract.

Poly(L-Glutamic Acid)-Based Brush Copolymers: Fabrication, Self-assembly, and Evaluation as Efficient Nanocarriers for Cationic Protein Drug Delivery.

Protein drugs were considered to be the first choice to treat many human diseases, but their clinical application was usually limited by their short half-life and lack of validated targeted therapy. Here, a series of folate-functionalized poly(ethylene glycol)-b-(poly(2-aminoethyl-L-glutamate)-g-poly(L-glutamic acid))s (FA-PEG-b-(PELG-g-PLGA)s) were designed as tumor-targeted carriers for cationic protein delivery. Compared with traditional copolymers consisting of PEG and linear charged hydrophilic blocks, FA-PEG-b-(PELG-g-PLGA) with brush-like polyelectrolyte segments were beneficial to improving their electrostatic interactions with loading protein molecules, thus increasing drug-loading stability and protecting encapsulated proteins from degradation. The designed polymer brushes could efficiently encapsulate cytochrome C (CytC), a cationic model protein, to form polyion complex (PIC) micelles with an average particle size of approximately 200 nm. An in vitro drug release study showed that the drug-loading stability of the formed PIC micelles was largely improved. The functionalization of the block copolymer carriers with a targeting folate group enhanced the tumor cell growth inhibition and total apoptotic rates induced by CytC. Our results shed light on the unique advantages of brush-like polymer carriers in delivering cationic proteins, and the poly(L-glutamic acid)-based linear-brush diblock copolymers could be applied as a versatile delivery platform for molecular targeting in cancer therapy.

Modified-release oral pellets for duodenum delivery of doxycycline hyclate.

To minimize the gastric and esophageal injury effect, a system to deliver doxycycline hyclate (DOXY) to the duodenum area is needed. DOXY-containing modified-release oral pellets (DMOP) coated with hydroxypropyl methylcellulose phthalate HP-55 (HPMCP HP-55) and hydroxypropyl methylcellulose E15 (HPMC E15) appear to be a reasonable choice. This coating layer dissolves at pH 5.5, which is the pH of the duodenum, but not at a gastric pH (1.2). The formulation and preparation of DMOP were optimized, and a scale-up test was performed. The results showed that the production reproducibility was acceptable, and the quality of DMOP well met the standards of Chinese Pharmacopeia (Ch.P, 2015 edition). Notably, the accumulated DOXY release was lower than 50% at pH 1.2 (20 min) and higher than 85% at pH 5.5, which met the USP40-NF35 standard for DOXY modified-release formulations. Moreover, the storage stability of DMOP with different packages was investigated by stress testing, accelerated and long-term testings. The stability of DMOP was maintained up to 12 months, in terms of DOXY content and in vitro release behavior. The results seem to suggest that DMOP could be a promising duodenum delivery system.

Influence of Polymers on the Physical and Chemical Stability of Spray-dried Amorphous Solid Dispersion: Dipyridamole Degradation Induced by Enteric Polymers.

Amorphous solid dispersions (ASDs) are inherently unstable because of high internal energy. Evaluating physical and chemical stability during the process and storage is essential. Numerous researches have demonstrated how polymers influence the drug precipitation and physical stability of ASDs, while the influence of polymers on the chemical stability of ASDs is often overlooked. Therefore, this study aimed to investigate the effect of polymers on the physical and chemical stability of spray-dried ASDs using dipyridamole (DP) as a model drug. Proper polymers were selected by assessing their abilities to inhibit drug recrystallization in supersaturated solutions. HPMC E5, Soluplus®, HPMCP-55, and HPMCAS-LP were shown to be effective stabilizers. The optimized formulations were further stored at a high temperature (60 °C) and high humidity (40 °C, 75% RH) for 2 months, and their physical and chemical stability was evaluated using polarizing optical microscopy, FTIR, HPLC, and mass spectrometry (MS). In general, crystallization was observed in all samples, which indicated the physical instability under stressed storage conditions. Also, it was noted that the polymers in ASDs rather than physical mixtures, induced a dramatic drug degradation after being exposed to a high temperature (HPMCP-55 > 80% and HPMCAS-LP > 50%) and high humidity (HPMCP-55 > 40% and HPMCAS-LP > 10%). The MS analysis further confirmed the degradation products, which might be generated from the reaction between dipyridamole and phthalic anhydride decomposed from HPMCP-55 and HPMCAS-LP. Overall, the exposure of ASDs to stressed conditions resulted in recrystallization and even the chemical degradation induced by polymers.

Evaluation of Streptococcus thermophilus IFFI 6038 Microcapsules Prepared Using an Ultra-fine Particle Processing System.

Microencapsulation technology has the potential to protect probiotics and to deliver them to the gut, and extrusion is one of the most commonly used methods. However, the rather large diameters of 1~5 mm produced tend to cause oral grittiness and result in low compliance. In this article, Streptococcus thermophilus IFFI 6038 (IFFI 6038) microcapsules were prepared using an ultra-fine particle processing system (UPPS) previously developed by this research group. IFFI 6038 suspension was pumped by a peristaltic pump to the feeding inlet nozzle and then dispersed into micro-droplets by a rotating disk, followed by solidification. Trehalose (16%) was used as a cryoprotectant to protect IFFI 6038 from damage by lyophilization used in the process. Alginate (3%) resulted in IFFI 6038 microcapsules with a median particle diameter (d 50) of 29.32 ± 0.12 µm and a span value of 1.00 ± 0.02, indicating uniform particle size distribution. To evaluate the potential of microencapsulation in protecting IFFI 6038 from the gastric conditions, the viable counts of IFFI 6038 following incubation of IFFI 6038 microcapsules in simulated gastric juices for 120 min were determined and compared with those of free IFFI 6038. The stability of microencapsulated IFFI 6038 upon storage for 3 months at 4°C and 25°C, respectively, was also determined. The results showed that microcapsules prepared by UPPS protected IFFI 6038 from gastric conditions. The results from a rat diarrhea model showed that microcapsules prepared by the UPPS method were able to effectively improve the diarrhea conditions in rats.

TPGS/hyaluronic acid dual-functionalized PLGA nanoparticles delivered through dissolving microneedles for markedly improved chemo-photothermal combined therapy of superficial tumor.

Nanoparticles (NPs) have shown potential in cancer therapy, while a single administration conferring a satisfactory outcome is still unavailable. To address this issue, the dissolving microneedles (DMNs) were developed to locally deliver functionalized NPs with combined chemotherapy and photothermal therapy (PTT). α-Tocopheryl polyethylene glycol succinate (TPGS)/hyaluronic acid (HA) dual-functionalized PLGA NPs (HD10 NPs) were fabricated to co-load paclitaxel and indocyanine green. HD10 NPs significantly enhanced the cytotoxicity of low-dose paclitaxel because of active and mitochondrial targeting by HA and TPGS, respectively. PTT could further sensitize tumor cells toward chemotherapy by promoting apoptosis into the advanced period, highly activating caspase 3 enzyme, and significantly reducing the expression of survivin and MMP-9 proteins. Further, the anti-tumor effects of HD10 NPs delivered through different administration routes were conducted on the 4T1 tumor-bearing mice. After a single administration, HD10 NPs delivered with DMNs showed the best anti-tumor effect when giving chemotherapy alone. As expected, the anti-tumor effect was profoundly enhanced after combined therapy, and complete tumor ablation was achieved in the mice treated with DMNs and intra-tumor injection. Moreover, DMNs showed better safety due to moderate hyperthermia. Therefore, the DMNs along with combined chemo-photothermal therapy provide a viable treatment option for superficial tumors.

In Situ Self-Assembly Nanomicelle Microneedles for Enhanced Photoimmunotherapy via Autophagy Regulation Strategy.

Although certain therapeutic agents with immunogenic properties may enhance antitumor immunity, cancer cells can eliminate harmful cytoplasmic entities and escape immunosurveillance by orchestrating autophagy. Here, an ingenious in situ self-assembled nanomicelle dissolving microneedle (DMN) patch was designed for intralesional delivery of immunogenic cell death-inducer (IR780) and autophagy inhibitor (chloroquine, CQ) coencapsulated micelles (C/I-Mil) for efficient antitumor therapy. Upon insertion into skin, the self-assembled C/I-Mil was generated, followed by electrostatic binding of hyaluronic acid, the matrix material of DMNs, accompanied by the dissolution of DMNs. Subsequently, photothermal-mediated size-tunable C/I-Mil could effectively penetrate into deep tumor tissue and be massively internalized via CD44 receptor-mediated endocytosis, precisely ablate tumors with the help of autophagy inhibition, and promote the release of damage-associated molecular patterns. Moreover, CQ could also act as an immune modulator to remodel tumor-associated macrophages toward the M1 phenotype via activating NF-κB. In vivo results showed that the localized photoimmunotherapy in synergy with autophagy inhibition could effectively eliminate primary and distant tumors, followed by a relapse-free survival of more than 40 days via remodeling the tumor immunosuppressive microenvironment. Our work provides a versatile, generalizable framework for employing self-assembled DMN-mediated autophagy inhibition integrated with photoimmunotherapy to sensitize superficial tumors and initiate optimal antitumor immunity.

Construction of a core-shell microneedle system to achieve targeted co-delivery of checkpoint inhibitors for melanoma immunotherapy.

Synergistic anti-tumor effect of anti-PD-1/L1 antibody (aPD-1/aPD-L1) and 1-methyl-D,L-tryptophan (1-MT) in melanoma has been well demonstrated, while efficient topical delivery systems are still largely unexplored. Here, a highly drug-concentrated hybrid core-shell microneedle (CSMN) system for co-delivery of checkpoint inhibitors was developed. Based on the specific drug-matrix interaction, the system concentrated aPD-L1 in the tips of microneedles through electrostatic interactions, and increased the amount of 1-MT loaded in CSMN by preventing its premature crystallization using PVA, the material used to prepare CSMN core. The prepared CSMN exhibited high transdermal delivery efficiency and long topical retention time of aPD-L1 for 2 days. Drug-loaded CSMN achieved better anti-tumor efficacy than the intra-tumor injection group at the same dose, which was likely because the former recruited more T lymphocytes to the tumor site. These findings suggested that this CSMN system was a promising local delivery system of both aPD-L1 and 1-MT for melanoma immunotherapy, and its unique core-shell structure could be readily adapted as a modular platform for various diseases, where combination therapy of both biomacromolecular drugs and other small-molecular agents were required. STATEMENT OF SIGNIFICANCE: In the present study, a core-shell microneedle (CSMN) system was constructed to achieve targeted co-delivery of checkpoint inhibitors to melanoma, while preventing significant systemic exposure. To overcome the drawback of insufficient drug loading of microneedles and effectively encapsulate two drugs simultaneously, microneedles were divided into two independent functional areas, a charged shell and a hydrophilic core and encapsulated drugs based on respective drug-matrix interaction. The charged shell prepared by chitosan could concentrate aPD-L1 in the tips of microneedles through electrostatic interactions. The core prepared by PVA successfully increased the amount of 1-MT loaded in microneedles by preventing its premature crystallization. The prepared CSMN exhibited high transdermal delivery efficiency and better anti-tumor efficacy than intra-tumor injection at the same dose.

Data on the drug release profiles and powder characteristics of the ethyl cellulose based microparticles prepared by the ultra-fine particle processing system.

Ethyl cellulose (EC) based microparticles (MPs) could provide sustained release for Huperzine A. The drug release mechanism of MPs was exploited to achieve an ideal drug release profile. We previously found that the wettability of MPs greatly contributed to facilitating drug release, which was detailed in a research article entitled "Huperzine A loaded multiparticulate disintegrating tablet: Drug release mechanism of ethyl cellulose microparticles and pharmacokinetic study" (Peng et al., 2019) [1]. In this article, the influence of different polymers and drugs on the drug release behavior was investigated to broaden or compensate this finding. Besides, powder characterization of MPs was used to evaluate the further application of MPs for tablets.

Loading amorphous Asarone in mesoporous silica SBA-15 through supercritical carbon dioxide technology to enhance dissolution and bioavailability.

The aim of this study was to load amorphous hydrophobic drug into ordered mesoporous silica (SBA-15) by supercritical carbon dioxide technology in order to improve the dissolution and bioavailability of the drug. Asarone was selected as a model drug due to its lipophilic character and poor bioavailability. In vitro dissolution and in vivo bioavailability of the obtained Asarone-SBA-15 were significantly improved as compared to the micronized crystalline drug. This study offers an effective, safe, and environmentally benign means of solving the problems relating to the solubility and bioavailability of hydrophobic molecules.