The biological functions of sphingolipids in plant pathogenic fungi.

Sphingolipids are critically significant in a range of biological processes in animals, plants, and fungi. In mammalian cells, they serve as vital components of the plasma membrane (PM) in maintaining its structure, tension, and fluidity. They also play a key role in a wide variety of biological processes, such as intracellular signal transduction, cell polarization, differentiation, and migration. In plants, sphingolipids are important for cell development and for cell response to environmental stresses. In pathogenic fungi, sphingolipids are crucial for the initiation and the development of infection processes afflicting humans. However, our knowledge on the metabolism and function of the sphingolipid metabolic pathway of pathogenic fungi affecting plants is still very limited. In this review, we discuss recent developments on sphingolipid pathways of plant pathogenic fungi, highlighting their uniqueness and similarity with plants and animals. In addition, we discuss recent advances in the research and development of fungal-targeted inhibitors of the sphingolipid pathway, to gain insights on how we can better control the infection process occurring in plants to prevent or/and to treat fungal infections in crops.

The effect of sevoflurane exposure on cell-type-specific changes in the prefrontal cortex in young mice.

Sevoflurane, the predominant pediatric anesthetic, has been linked to neurotoxicity in young mice, although the underlying mechanisms remain unclear. This study focuses on investigating the impact of neonatal sevoflurane exposure on cell-type-specific alterations in the prefrontal cortex (PFC) of young mice. Neonatal mice were subjected to either control treatment (60% oxygen balanced with nitrogen) or sevoflurane anesthesia (3% sevoflurane in 60% oxygen balanced with nitrogen) for 2 hours on postnatal days (PNDs) 6, 8, and 10. Behavioral tests and single-nucleus RNA sequencing (snRNA-seq) of the PFC were conducted from PNDs 31 to 37. Mechanistic exploration included clustering analysis, identification of differentially expressed genes (DEGs), enrichment analyses, single-cell trajectory analysis, and genome-wide association studies (GWAS). Sevoflurane anesthesia resulted in sociability and cognition impairments in mice. Novel specific marker genes identified 8 distinct cell types in the PFC. Most DEGs between the control and sevoflurane groups were unique to specific cell types. Re-defining 15 glutamatergic neuron subclusters based on layer identity revealed their altered expression profiles. Notably, sevoflurane disrupted the trajectory from oligodendrocyte precursor cells (OPCs) to oligodendrocytes (OLs). Validation of disease-relevant candidate genes across the main cell types demonstrated their association with social dysfunction and working memory impairment. Behavioral results and snRNA-seq collectively elucidated the cellular atlas in the PFC of young male mice, providing a foundation for further mechanistic studies on developmental neurotoxicity induced by anesthesia.

Tetrahedral Occupied V Ions Enabling Reversible Three-Electron Redox of Cr3+ /Cr6+ in Layered Cathode Materials for Potassium-Ion Batteries.

Reversible three-electron redox of Cr3+ /Cr6+ in layered cathode materials for rechargeable batteries is very attractive in layered cathode materials, which leads to high capacity and energy density for rechargeable batteries. However, the poor reversibility and Cr-ion migration make it very challenging. In this work, by introducing V ions into tetrahedral sites of layer-structured NaCrO2 , reversible three-electron redox of Cr3+ /Cr6+ is realized successfully in NaCr0.92 V0.05 O2 (NCV05) cathode for potassium-ion batteries with a cut-off voltage of 4.0 V. V ions can weaken the attraction of Cr to electrons, leading to enhanced valence change of Cr ions. On the other hand, V in tetrahedral sites can facilitate the reversible migration of Cr between octahedral and tetrahedral sites via coulombic repulsion to realize the reversible redox between Cr3+ and Cr6+ during charge and discharge processes. In addition, V ions can inhibit the phase transition from O3 phase to O'3 phase during the charge process by adjusting the crystal lattices. As a result, the NaCr0.92 V0.05 O2 cathode exhibits a high reversible capacity of 130 mAh g-1 with promising cycle stability and rate capability. The strategy opens new opportunity for developing high-capacity cathode materials for potassium-ion batteries.

The cell cycle, autophagy, and cell wall integrity pathway jointly governed by MoSwe1 in Magnaporthe oryzae.

The cell cycle is pivotal to cellular differentiation in plant pathogenic fungi. Cell wall integrity (CWI) signaling plays an essential role in coping with cell wall stress. Autophagy is a degradation process in which cells decompose their components to recover macromolecules and provide energy under stress conditions. However, the specific association between cell cycle, autophagy and CWI pathway remains unclear in model pathogenic fungi Magnaporthe oryzae. Here, we have identified MoSwe1 as the conserved component of the cell cycle in the rice blast fungus. We have found that MoSwe1 targets MoMps1, a conserved critical MAP kinase of the CWI pathway, through protein phosphorylation that positively regulates CWI signaling. The CWI pathway is abnormal in the ΔMoswe1 mutant with cell cycle arrest. In addition, we provided evidence that MoSwe1 positively regulates autophagy by interacting with MoAtg17 and MoAtg18, the core autophagy proteins. Moreover, the S phase initiation was earlier, the morphology of conidia and appressoria was abnormal, and septum formation and glycogen degradation were impaired in the ΔMoswe1 mutant. Our research defines that MoSWE1 regulation of G1/S transition, CWI pathway, and autophagy supports its specific requirement for appressorium development and virulence in plant pathogenic fungi. Video Abstract.

Interface Engineering Overall Seawater Splitting of Self-Supporting CeOx@NiCo2O4 Arrays.

Exploring advanced electrocatalysts for overall seawater splitting is of great significance for large-scale green hydrogen production in which interface engineering has been considered as an effective strategy to enhance the intrinsic activities of the electrocatalysts. In this work, CeOx-modified NiCo2O4 nanoneedle arrays are designed and constructed in situ grown on Ni foam (NF) through a facile two-step synthesis method. Density functional theory calculations reveal that the strong interaction between CeOx and NiCo2O4 can regulate the electronic states of metal surfaces and optimize the electronic structures of the materials, essentially improving the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) properties. Specifically, in alkaline electrolytes, CeOx@NiCo2O4/NF exhibits superior electrocatalytic activities and stabilities, requiring overpotentials of 238 mV for the OER and 144 mV for the HER to achieve a current density of 10 mA cm-2. When applied to a simulated seawater splitting device, the CeOx@NiCo2O4/NF also maintains a battery voltage of 1.66 V to reach 10 mA cm-2 and exhibits good stability for over 60 h, with high faradic efficiencies (FEs) close to 100% for both the OER and HER.

The MoLfa1 Protein Regulates Fungal Development and Septin Ring Formation in Magnaporthe oryzae.

Septins play a key regulatory role in cell division, cytokinesis, and cell polar growth of the rice blast fungus (Magnaporthe oryzae). We found that the organization of the septin ring, which is essential for appressorium-mediated infection in M. oryzae, requires long-chain fatty acids (LCFAs), which act as mediators of septin organization at membrane interfaces. However, it is unclear how septin ring formation and LCFAs regulate the pathogenicity of the rice blast fungus. In this study, a novel protein was named MoLfa1 because of its role in LCFAs utilization. MoLfa1 affects the utilization of LCFAs, lipid metabolism, and the formation of the septin ring by binding with phosphatidylinositol phosphates (PIPs), thereby participating in the construction of penetration pegs of M. oryzae. In addition, MoLfa1 is localized in the endoplasmic reticulum (ER) and interacts with the ER-related protein MoMip11 to affect the phosphorylation level of Mps1. (Mps1 is the core protein in the MPS1-MAPK pathway.) In conclusion, MoLfa1 affects conidia morphology, appressorium formation, lipid metabolism, LCFAs utilization, septin ring formation, and the Mps1-MAPK pathway of M. oryzae, influencing pathogenicity.

Comparison of pediatric pelvic fractures and associated injuries caused by different types of road traffic accidents.

PURPOSE: To explore the clinical characteristics of pediatric pelvic fracturs caused by traffic accidents and to analyze the accompanying injuries and complications. METHODS: A total of 222 cases involved traffic accidents was enrolled in this case-control study. The data of children with pelvic fractures caused by traffic accidents who were admitted to our hospital from January 2006 to December 2021 were analyzed retrospectively. Sex, age, Tile classification, abbreviated injury scale score, injury severity score, mortality, and accompanying injuries were studied. The ANOVA was used for measurement data, and the non-parametric rank sum test was used for non-normally distributed data. The Fisher's exact probability method was used for the count data. RESULTS: Of all enrolled cases, 140 are boys and 82 are girls, including 144 aged < 6 years, 65 aged between 6 and 12 years, and 13 aged > 12 years. Depending on the injury mechanism, there are 15 cases involving pedestrians vs. motorcycles (PVM), 91 cases involving pedestrians vs. passenger cars (PVC), 78 cases involving pedestrians vs. commercial vehicles (PVV), and 38 cases involving motor vehicles vs. motor vehicles (MVM). Associated injuries are reported in 198 cases (89.2%), primarily involving the abdomen injury in 144 cases (64.9%), and lower limb injury in 99 cases (44.6%). PVV injury involves longer hospital stay (p = 0.004). Intensive care unit admission rate is significantly higher in the MVM group than in other groups (p = 0.004). Head injury (p = 0.001) and face injury (p = 0.037) are more common in the MVM group, whereas abdominal injury (p = 0.048) and lower limb injury (p = 0.037) are more common in the PVV group. In the MVM group, the brain injury (p = 0.004) and femoral neck injury (p = 0.044) are more common. In the PVM group, the mediastinum (p = 0.004), ear (p = 0.009), lumbar vertebrae (p = 0.008), and spinal cord (p = 0.011) are the most vulnerable regions, while in the PVV group, the perineum (p < 0.001), urethra (p = 0.001), rectum (p = 0.006), anus (p = 0.004), and lower limb soft tissues (p = 0.024) are the most vulnerable regions. Children aged > 12 years have higher pelvic abbreviated injury scale scores (p = 0.019). There are significant differences in the classification of pelvic fractures among children < 6, 6 - 12, and > 12 years of age, with Tile C being more likely to occur in children > 12 years of age (p = 0.033). Children aged > 12 years are more likely to sustain injuries to the spleen (p = 0.022), kidneys (p = 0.019), pancreas (p < 0.001), lumbar vertebrae (p = 0.013), and sacrum (p = 0.024). The MVM group has the highest complication rate (p = 0.003). CONCLUSION: PVC is the leading cause of the abdomen and lower extremities injury and has the most concomitant injuries. Different traffic injuries often lead to different associated injuries. Older children are more likely to sustain more severe pelvic fractures and peripelvic organs injuries. The MVM group has the highest extent of injury and complication rates.

BACE1 SUMOylation deregulates phosphorylation and ubiquitination in Alzheimer's disease pathology.

BACE1 is essential for the generation of amyloid-ß (Aß) that likely initiates the toxicity in Alzheimer's disease (AD). BACE1 activity is mainly regulated by post-translational modifications, but the relationship between these modifications is not fully characterized. Here, we studied the effects of BACE1 SUMOylation on its phosphorylation and ubiquitination. We demonstrate that SUMOylation of BACE1 inhibits its phosphorylation at S498 and its ubiquitination in vitro. Conversely, BACE1 phosphorylation at S498 suppresses its SUMOylation, which results in promoting BACE1 degradation in vitro. Furthermore, an increase in BACE1 SUMOylation is associated with the progression of AD pathology, while its phosphorylation and ubiquitination are decreased in an AD mouse model. Our findings suggest that BACE1 SUMOylation reciprocally influences its phosphorylation and competes against its ubiquitination, which might provide a new insight into the regulations of BACE1 activity and Aß accumulation.

Stacking Order Induced Anion Redox Regulation for Layer-Structured Na0.75 Li0.2 Mn0.7 Cu0.1 O2 Cathode Materials.

Stacking order plays a key role in defining the electrochemical behavior and structural stability of layer-structured cathode materials. However, the detailed effects of stacking order on anionic redox in layer-structured cathode materials have not been investigated specifically and are still unrevealed. Herein, two layered cathodes with the same chemical formula but different stacking orders: P2-Na0.75 Li0.2 Mn0.7 Cu0.1 O2 (P2-LMC) and P3-Na0.75 Li0.2 Mn0.7 Cu0.1 O2 (P3-LMC) are compared. It is found that P3 stacking order is beneficial to improve the oxygen redox reversibility compared with P2 stacking order. By using synchrotron hard and soft X-ray absorption spectroscopies, three redox couples of Cu2+ /Cu3+ , Mn3.5+ /Mn4+ , and O2- /O- are revealed to contribute charge compensation in P3 structure simultaneously, and two redox couples of Cu2+ /Cu3+ and O2- /O- are more reversible than those in P2-LMC due to the higher electronic densities in Cu 3d and O 2p orbitals in P3-LMC. In situ X-ray diffraction reveals that P3-LMC exhibits higher structural reversibility during charge and discharge than P2-LMC, even at 5C rate. As a result, P3-LMC delivers a high reversible capacity of 190.3 mAh g-1 and capacity retention of 125.7 mAh g-1 over 100 cycles. These findings provide new insight into oxygen-redox-involved layered cathode materials for SIBs.

Optimization of optical and structural properties of Al2O3/TiO2 nano-laminates deposited by atomic layer deposition for optical coating.

Optimizing the atomic layer deposition (ALD) process of films is particularly important in preparing multilayer interference films. In this work, a series of Al2O3/TiO2 nano-laminates with a fixed growth cycle ratio of 1:10 were deposited on Si and fused quartz substrates at 300 °C by ALD. The optical properties, crystallization behavior, surface appearance and microstructures of those laminated layers were systematically investigated by spectroscopic ellipsometry, spectrophotometry, X-ray diffraction, atomic force microscope and transmission electron microscopy. By inserting Al2O3 interlayers into TiO2 layers, the crystallization of the TiO2 is reduced and the surface roughness becomes smaller. The TEM images show that excessively dense distribution of Al2O3 intercalation leads to the appearance of TiO2 nodules, which in turn leads to increased roughness. The Al2O3/TiO2 nano-laminate with a cycle ratio 40:400 has relatively small surface roughness. Additionally, oxygen-deficient defects exist at the interface of Al2O3 and TiO2, leading to evident absorption. Using O3 as an oxidant instead of H2O for depositing Al2O3 interlayers was verified to be effective in reducing absorption during broadband antireflective coating experiments.

Low polarization-sensitive ultra-broadband anti-reflection coatings with improved reliability.

Broader spectra, lower reflectivity and higher reliability are the performance requirements for broadband antireflective (BBAR) films. In this work, a BBAR film structure was proposed, which maintains extremely low reflectivity, ultra-wide spectra, low polarization sensitivity and practical reliability. The BBAR film consists of a dense multilayer interference stack on the bottom and a nano-grass-like alumina (NGLA) layer with a gradient low refractive index distribution on the top. The film was deposited by atomic layer deposition, while the NGLA layer was formed by means of a hot water bath on Al2O3 layer. The top NGLA layer has extremely high porosity and ultra-low refractive index, along with extremely fragile structure. To surmount the fragility of NGLA layer, a sub-nano layer of SiO2 was grown by atomic layer deposition to solidify its structure and also to adjust the refractive index with different thicknesses of SiO2. Finally, in the wide wavelength range of 400-1100 nm, the average transmittance of the double-sided coated fused quartz reaches 99.2%. The absorption, light scattering, reliability and polarization characteristics of BBAR films were investigated. An optimized BBAR film with low polarization-sensitivity and improved reliability was realized, which should be potentially promising for application in optical systems.

Densifying Crystalline-Amorphous Ni3S2/NiOOH Interfacial Sites To Boost Electrocatalytic O2 Production.

The development of an efficient and low-cost electrocatalyst for oxygen evolution reaction (OER) is the key to improving the overall efficiency of water electrolysis. Here, we report the design of a three-dimensional (3-D) heterostructured Ni9S8/Ni3S2 precatalyst composed of unstable Ni9S8 and inert Ni3S2 components, which undergoes in situ electrochemical activation to generate an amorphous-NiOOH/Ni3S2 heterostructured catalyst. In situ Raman spectroscopy combined with ex situ characterizations, such as X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy, reveals that during the activation, Ni9S8 loses the sulfur element to form nickel oxides and eventually transforms to amorphous NiOOH at O2-evolving potentials, while the Ni3S2 component is rather inert that its majority in the bulk remains, thus forming a 3-D congee-like NiOOH/Ni3S2 heterostructure with the Ni3S2 crystalline particles randomly dispersed among amorphous NiOOH species. Unlike the sparse heterostructure that consists of a layer of NiOOH on top of Ni3S2, our unique congee-like NiOOH/Ni3S2 heterostructure provides plentiful reactive amorphous-crystalline interfacial sites. Moreover, the partial electron transfer between the NiOOH and remaining Ni3S2, benefiting from their dense interfacial sites, contributes to a higher valence state of the Ni3+ active centers in NiOOH, hence optimizing the adsorption of OER intermediates. Density functional theory calculations further disclose that the electronic structure regulation not only optimizes the Gibbs free energy of intermediate adsorption but also tunes the OH* absorption behavior to be exothermic, elucidating the spontaneous occurrence of OH* absorption and hence improves the OER. Therefore, a low overpotential of only 197 mV at an O2-evolving current density of 10 mA/cm2, a small Tafel slope of 38.8 mV/dec, and good stability are achieved on the amorphous-NiOOH/crystalline-Ni3S2 heterostructured catalyst.

Alternations of ensiling performance and bacterial community in response to different native grassland in Mongolian Plateau.

AIMS: The aim of this study was to investigate the dynamics of bacterial communities and natural fermentation quality in three steppe types [meadow steppe (MS); typical steppe (TS); and desert steppe (DS)] on the Mongolian Plateau. METHODS AND RESULTS: PacBio single molecule with real-time sequencing technology was applied to provide insights into the dynamics of the physicochemical characteristics and the complex microbiome of native grass after 1, 7, 15, and 30 days of fermentation process. The dry matter, crude protein, and water soluble carbohydrate (WSC) contents of the three groups slowly decreased after 1 day of fermentation process, and the lowest WSC concentration after 30 days of ensiling was detected in the DS group compared to that in the MS and TS groups. There was no significant effect of steppe types on lactic acid and butyric acid content (P > 0.05). The pH was higher in the early stages of fermentation. After 30 days of fermentation, the pH of MS and DS dropped to ∼5.60, while TS was as high as 5.94. At different ensiling days, the pH of TS was significantly higher than that of MS (P < 0.05). The ammonia nitrogen content of MS was significantly higher than TS and DS (P < 0.05). During the whole fermentation process, Leuconostoc mesenteroides and Pseudocitrobacter faecalis were the main species of DS, while Enterobacter roggenkampii and Faecalibacterium prausnitzii dominated the fermentation process in MS and TS, respectively. CONCLUSIONS: The fermentation quality of native grass silage of different steppe types was less satisfactory, with the silage quality ranging from DS, MS, and TS in descending order. The epiphytic bacteria dominating the fermentation process differed between steppe types of silage. Leuconostoc mesenteroides as the main strain of DS had a modulating effect on pH and LA content, while the main strains of MS and TS (Enterobacter roggenkampii and Faecalibacterium prausnitzii) dominated the silage without significant effect on improving fermentation characteristics and nutritional quality.

Release of moth pheromone compounds from Nicotiana benthamiana upon transient expression of heterologous biosynthetic genes.

BACKGROUND: Using genetically modified plants as natural dispensers of insect pheromones may eventually become part of a novel strategy for integrated pest management. RESULTS: In the present study, we first characterized essential functional genes for sex pheromone biosynthesis in the rice stem borer Chilo suppressalis (Walker) by heterologous expression in Saccharomyces cerevisiae and Nicotiana benthamiana, including two desaturase genes CsupYPAQ and CsupKPSE and a reductase gene CsupFAR2. Subsequently, we co-expressed CsupYPAQ and CsupFAR2 together with the previously characterized moth desaturase Atr∆11 in N. benthamiana. This resulted in the production of (Z)-11-hexadecenol together with (Z)-11-hexadecenal, the major pheromone component of C. suppressalis. Both compounds were collected from the transformed N. benthamiana headspace volatiles using solid-phase microextraction. We finally added the expression of a yeast acetyltransferase gene ATF1 and could then confirm also (Z)-11-hexadecenyl acetate release from the plant. CONCLUSIONS: Our results pave the way for stable transformation of plants to be used as biological pheromone sources in different pest control strategies.

Manufacturing specialized wax esters in plants.

Biologically produced wax esters can fulfil different industrial purposes. These functionalities almost drove the sperm whale to extinction from hunting. After the ban on hunting, there is a niche in the global market for biolubricants with properties similar to spermaceti. Wax esters can also serve as a mechanism for producing insect sex pheromone fatty alcohols. Pheromone-based mating disruption strategies are in high demand to replace the toxic pesticides in agriculture and manage insect plagues threatening our food and fiber reserves. In this study we set out to investigate the possibilities of in planta assembly of wax esters, for specific applications, through transient expression of various mix-and-match combinations of genes in Nicotiana benthamiana leaves. Our synthetic biology designs were outlined in order to pivot plant lipid metabolism into producing wax esters with targeted fatty acyl and fatty alcohols moieties. Through this approach we managed to obtain industrially important spermaceti-like wax esters enriched in medium-chain fatty acyl and/or fatty alcohol moieties of wax esters. Via employment of plant codon-optimized moth acyl-CoA desaturases we also managed to capture unusual, unsaturated fatty alcohol and fatty acyl moieties, structurally similar to moth pheromone compounds, in plant-accumulated wax esters. Comparison between outcomes of different experimental designs identified targets for stable transformation to accumulate specialized wax esters and helped us to recognize possible bottlenecks of such accumulation.

Spontaneous Dissolution of Oxometalates Boosting the Surface Reconstruction of CoMOx (M = Mo, V) to Achieve Efficient Overall Water Splitting in Alkaline Media.

Bimetallic materials have been regarded as promising catalysts for efficient alkaline water splitting. However, the spontaneous reconstruction of the surface structures of the catalysts before catalysis has long been overlooked. Here, we present that in situ dissolution of MoO42- in CoMoO4 boosts spontaneous surface reconstruction in an alkaline medium. Our results reveal that CoMoO4 microrod arrays function as precatalysts that undergo spontaneous surface reconstruction under alkaline conditions, forming a layer of Co3O4/CoMoO4 and CoOOH/CoMoO4 heterostructures. X-ray photoelectron spectroscopy (XPS) combined with in situ Raman spectroscopy reveals that in such activated CoMoO4 (A-CoMoO4), the partial electron transfer from Co to Mo sites helps induce a higher valence state of Co centers and the heterostructure of Co3O4/CoMoO4 may promote the generation of CoOOH, which is very likely the precursor to the active Co4+ species for oxygen evolution reaction (OER) catalysis. During the hydrogen evolution reaction (HER), Co3O4 generated after surface reconstruction can promote the dissociation of water, which is considered the rate-determining step of the alkaline HER. Hence, A-CoMoO4 exhibits superior bifunctional electrocatalytic activities that the overpotentials at a working current density of 10 mA cm-2 for the HER and OER are only 13 and 264 mV, respectively. Inspired by the remarkable bifunctionality, the electrolytic cell employing A-CoMoO4 as both anode and cathode shows an appealing potential of 1.51 V to deliver 10 mA cm-2 for overall water splitting. Similarly, CoVOx also shows the spontaneous surface reconstruction behavior in the alkaline medium, which we propose can be extended to a series of oxometalate catalysts.

CoMo layered double hydroxide equipped with carbon nanotubes for electrocatalytic oxygen evolution reaction.

To carry out effective resource reforming of sustainable electricity, hydrogen production by electrochemical water splitting provides an eco-friendly and economical way. Nevertheless, the oxygen evolution reaction (OER) at the anode is limited by the slow reaction process, which hinders the large-scale development and application of electrolysis technology. In this work, we present an electrocatalyst with superior OER performance, which attributed to the abundant active sites and good electronic conductivity. The two-dimensional CoMo Layered Double Hydroxide nanosheets are synthesized and deposited on conductive carbon nanotubes (CoMo LDH/CNTs), and then hybrid composites show better catalytic performance than their undecorated counterpart under identical conditions. Specifically, CoMo LDH/CNTs exhibit the low overpotential of 268 mV to obtain 10 mA cm-2and satisfactory stability (more than 40 h). We emphasize that this hybridization strategy with a conductive supporting framework could design more abundant and low-cost OER electrocatalysts to minimize electrical energy consumption, thereby achieving efficient conversion between energy sources.

Evolution of the codling moth pheromone via an ancient gene duplication.

BACKGROUND: Defining the origin of genetic novelty is central to our understanding of the evolution of novel traits. Diversification among fatty acid desaturase (FAD) genes has played a fundamental role in the introduction of structural variation in fatty acyl derivatives. Because of its central role in generating diversity in insect semiochemicals, the FAD gene family has become a model to study how gene family expansions can contribute to the evolution of lineage-specific innovations. Here we used the codling moth (Cydia pomonella) as a study system to decipher the proximate mechanism underlying the production of the ∆8∆10 signature structure of olethreutine moths. Biosynthesis of the codling moth sex pheromone, (E8,E10)-dodecadienol (codlemone), involves two consecutive desaturation steps, the first of which is unusual in that it generates an E9 unsaturation. The second step is also atypical: it generates a conjugated diene system from the E9 monoene C12 intermediate via 1,4-desaturation. RESULTS: Here we describe the characterization of the FAD gene acting in codlemone biosynthesis. We identify 27 FAD genes corresponding to the various functional classes identified in insects and Lepidoptera. These genes are distributed across the C. pomonella genome in tandem arrays or isolated genes, indicating that the FAD repertoire consists of both ancient and recent duplications and expansions. Using transcriptomics, we show large divergence in expression domains: some genes appear ubiquitously expressed across tissue and developmental stages; others appear more restricted in their expression pattern. Functional assays using heterologous expression systems reveal that one gene, Cpo_CPRQ, which is prominently and exclusively expressed in the female pheromone gland, encodes an FAD that possesses both E9 and ∆8∆10 desaturation activities. Phylogenetically, Cpo_CPRQ clusters within the Lepidoptera-specific ∆10/∆11 clade of FADs, a classic reservoir of unusual desaturase activities in moths. CONCLUSIONS: Our integrative approach shows that the evolution of the signature pheromone structure of olethreutine moths relied on a gene belonging to an ancient gene expansion. Members of other expanded FAD subfamilies do not appear to play a role in chemical communication. This advises for caution when postulating the consequences of lineage-specific expansions based on genomics alone.

The LAMMER Kinase MoKns1 Regulates Growth, Conidiation and Pathogenicity in Magnaporthe oryzae.

Magnaporthe oryzae is an important pathogen that causes a devastating disease in rice. It has been reported that the dual-specificity LAMMER kinase is conserved from yeast to animal species and has a variety of functions. However, the functions of the LAMMER kinase have not been reported in M. oryzae. In this study, we identified the unique LAMMER kinase MoKns1 and analyzed its function in M. oryzae. We found that in a MoKNS1 deletion mutant, growth and conidiation were primarily decreased, and pathogenicity was almost completely lost. Furthermore, our results found that MoKns1 is involved in autophagy. The ΔMokns1 mutant was sensitive to rapamycin, and MoKns1 interacted with the autophagy-related protein MoAtg18. Compared with the wild-type strain 70-15, autophagy was significantly enhanced in the ΔMokns1 mutant. In addition, we also found that MoKns1 regulated DNA damage stress pathways, and the ΔMokns1 mutant was more sensitive to hydroxyurea (HU) and methyl methanesulfonate (MMS) compared to the wild-type strain 70-15. The expression of genes related to DNA damage stress pathways in the ΔMokns1 mutant was significantly different from that in the wild-type strain. Our results demonstrate that MoKns1 is an important pathogenic factor in M. oryzae involved in regulating autophagy and DNA damage response pathways, thus affecting virulence. This research on M. oryzae pathogenesis lays a foundation for the prevention and control of M. oryzae.

Research on the Molecular Interaction Mechanism between Plants and Pathogenic Fungi.

Plant diseases caused by fungi are one of the major threats to global food security and understanding the interactions between fungi and plants is of great significance for plant disease control. The interaction between pathogenic fungi and plants is a complex process. From the perspective of pathogenic fungi, pathogenic fungi are involved in the regulation of pathogenicity by surface signal recognition proteins, MAPK signaling pathways, transcription factors, and pathogenic factors in the process of infecting plants. From the perspective of plant immunity, the signal pathway of immune response, the signal transduction pathway that induces plant immunity, and the function of plant cytoskeleton are the keys to studying plant resistance. In this review, we summarize the current research progress of fungi-plant interactions from multiple aspects and discuss the prospects and challenges of phytopathogenic fungi and their host interactions.