Antibacterial Nanoplatelets via Crystallization-Driven Self-Assembly of Poly(l-lactide)-Based Block Copolymers.

Membrane-active antimicrobial materials are promising substances to fight antimicrobial resistance. Herein, crystallization-driven self-assembly (CDSA) is employed for the preparation of nanoparticles with different morphologies, and their bioactivity is explored. Block copolymers (BCPs) featuring a crystallizable and antimicrobial block were synthesized using a combination of ring-opening and photoiniferter RAFT polymerizations. Subsequently formed nanostructures formed by CDSA could not be deprotected without degradation of the structures. CDSA of deprotected BCPs yielded 2D diamond-shaped nanoplatelets in MeOH, while spherical nanostructures were observed for assembly in water. Platelets exhibited improved antibacterial capabilities against two Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa) compared to their spherical counterparts. The absence of hemolytic activity leads to the excellent selectivity of platelets. A mechanism based on membrane permeabilization was confirmed via dye-leakage assays. This study emphasized the impact of the shape of nanostructures on their interaction with bacterial cells and how a controlled assembly can improve bioactivity.

Shape Matters: Highly Selective Antimicrobial Bottle Brush Copolymers via a One-Pot RAFT Polymerization Approach.

The one-pot synthesis of antimicrobial bottle brush copolymers is presented. Reversible addition-fragmentation chain-transfer (RAFT) polymerization is used for the production of the polymeric backbone, as well as for the grafts, which were installed using a grafting-from approach. A combination of N-isopropyl acrylamide and a Boc-protected primary amine-containing acrylamide was used in different compositions. After deprotection, polymers featuring different charge densities were obtained in both linear and bottle brush topologies. Antimicrobial activity was tested against three clinically relevant bacterial strains, and growth inhibition was significantly increased for bottle brush copolymers. Blood compatibility investigations revealed strong hemagglutination for linear copolymers and pronounced hemolysis for bottle brush copolymers. However, one bottle brush copolymer with a 50% charge density revealed strong antibacterial activity and negligible in vitro blood toxicity (regarding hemolysis and hemagglutination tests) resulting in selectivity values as high as 320. Membrane models were used to probe the mechanism of shown polymers that was found to be based on membrane disruption. The trends from bioassays are accurately reflected in model systems indicating that differences in lipid composition might be responsible for selectivity. However, bottle brush copolymers were found to possess increased cytotoxicity against human embryonic kidney (HEK) cells compared with linear analogues. The introduced synthetic platform enables screening of further, previously inaccessible parameters associated with the bottle brush topology, paving the way to further improve their activity profiles.

A Dual pH- and Light-Responsive Spiropyran-Based Surfactant: Investigations on Its Switching Behavior and Remote Control over Emulsion Stability.

A cationic surfactant containing a spiropyran unit is prepared exhibiting a dual-responsive adjustability of its surface-active characteristics. The switching mechanism of the system relies on the reversible conversion of the non-ionic spiropyran (SP) to a zwitterionic merocyanine (MC) and can be controlled by adjusting the pH value and via light, resulting in a pH-dependent photoactivity: While the compound possesses a pronounced difference in surface activity between both forms under acidic conditions, this behavior is suppressed at a neutral pH level. The underlying switching processes are investigated in detail, and a thermodynamic explanation based on a combination of theoretical and experimental results is provided. This complex stimuli-responsive behavior enables remote-control of colloidal systems. To demonstrate its applicability, the surfactant is utilized for the pH-dependent manipulation of oil-in-water emulsions.

Xanthate-supported photo-iniferter (XPI)-RAFT polymerization: facile and rapid access to complex macromolecules.

Xanthate-supported photo-iniferter (XPI)-reversible addition-fragmentation chain-transfer (RAFT) polymerization is introduced as a fast and versatile photo-polymerization strategy. Small amounts of xanthate are added to conventional RAFT polymerizations to act as a photo-iniferter under light irradiation. Radical exchange is facilitated by the main CTA ensuring control over the molecular weight distribution, while xanthate enables an efficient photo-(re)activation. The photo-active moiety is thus introduced into the polymer as an end group, which makes chain extension of the produced polymers possible directly by irradiation. This is in sharp contrast to conventional photo-initiators, or photo electron transfer (PET)-RAFT polymerizations, where radical generation depends on the added small molecules. In contrast to regular photo-iniferter-RAFT polymerization, photo-activation is decoupled from polymerization control, rendering XPI-RAFT an elegant tool for the fabrication of defined and complex macromolecules. The method is oxygen tolerant and robust and was used to perform screenings in a well-plate format, and it was even possible to produce multiblock copolymers in a coffee mug under open-to-air conditions. XPI-RAFT does not rely on highly specialized equipment and qualifies as a universal tool for the straightforward synthesis of complex macromolecules. The method is user-friendly and broadens the scope of what can be achieved with photo-polymerization techniques.

Development of pH-Sensitive Chitosan-g-poly(acrylamide-co-acrylic acid) Hydrogel for Controlled Drug Delivery of Tenofovir Disoproxil Fumarate.

The present study aimed to develop a pH-sensitive chitosan-based hydrogel for controlled delivery of an anti-hepatitis B drug, tenofovir disoproxil fumarate (TDF). Free radical polymerization was utilized to graft acrylamide and acrylic acid using N,N-methylene bisacrylamide as the crosslinker. Physicochemical characterization confirmed the synthesis of thermally stable chitosan-g-poly(acrylamide-co-acrylic acid) hydrogels with well-defined pores within a fibrous surface. The prepared hydrogels exhibited pH and ionic strength sensitivity, with the swelling significantly lower under acidic and strong ionic strength conditions but higher in neutral and basic solutions. In addition, cytotoxicity studies on HeLa cell lines proved the cytocompatibility of the drug delivery material and its readiness for physiological applications. The encapsulation of TDF in the hydrogels was optimized and an encapsulation efficiency and a drug loading percentage of 96% and 10% were achieved, respectively. More interestingly, in vitro release studies demonstrated a pH-dependent release of TDF from hydrogels. The release at pH 7.4 was found to be up to five times higher than at pH 1.2 within 96 h. This further suggested that the newly developed hydrogel-loaded TDF could be proposed as a smart delivery system for oral delivery of anti-hepatitis B drugs.

Application of Lipid-Based Nanocarriers for Antitubercular Drug Delivery: A Review.

The antimicrobial drugs currently used for the management of tuberculosis (TB) exhibit poor bioavailability that necessitates prolonged treatment regimens and high dosing frequency to achieve optimal therapeutic outcomes. In addition, these agents cause severe adverse effects, as well as having detrimental interactions with other drugs used in the treatment of comorbid conditions such as HIV/AIDS. The challenges associated with the current TB regimens contribute to low levels of patient adherence and, consequently, the development of multidrug-resistant TB strains. This has led to the urgent need to develop newer drug delivery systems to improve the treatment of TB. Targeted drug delivery systems provide higher drug concentrations at the infection site, thus leading to reduced incidences of adverse effects. Lipid-based nanocarriers have proven to be effective in improving the solubility and bioavailability of antimicrobials whilst decreasing the incidence of adverse effects through targeted delivery. The potential application of lipid-based carriers such as liposomes, niosomes, solid lipid nanoparticles, nanostructured lipid carriers, nano and microemulsions, and self-emulsifying drug delivery systems for the treatment of TB is reviewed herein. The composition of the investigated lipid-based carriers, their characteristics, and their influence on bioavailability, toxicity, and sustained drug delivery are also discussed. Overall, lipid-based systems have shown great promise in anti-TB drug delivery applications. The summary of the reviewed data encourages future efforts to boost the translational development of lipid-based nanocarriers to improve TB therapy.

Green synthesis of antimicrobial silver nanoparticles using aqueous leaf extracts from three Congolese plant species (Brillantaisia patula, Crossopteryx febrifuga and Senna siamea).

In the present study, silver nanoparticles (AgNPs) were synthesized using aqueous leaf extracts of three Congolese plant species, namely Brillantaisia patula (BR-PA), Crossopteryx febrifuga (CR-FE) and Senna siamea (SE-SI). The obtained AgNPs were studied for their optical, structural, surface morphological and antibacterial properties. The prepared AgNPs were characterized by using UV-Visible spectra, Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray spectroscopy (EDX) and X-ray diffractometer (XRD). The synthesized nanoparticles were spherical shaped and well-dispersed with average sizes ranging from 45 to 110 nm. The AgNPs derived from BR-PA, CR-FE and SE-SI exhibited higher antibacterial activity against three bacterial pathogens of the human skin compared to their respective crude extracts and AgNO3. This indicated that the biomolecules covering the nanoparticles may enhance the biological activity of metal nanoparticles. Hence, our results support that biogenic synthesis of AgNPs from Congolese plants constitutes a potential area of interest for the therapeutic management of microbial diseases such as infectious skin diseases.

Biocompatibility of Biomaterials for Nanoencapsulation: Current Approaches.

Nanoencapsulation is an approach to circumvent shortcomings such as reduced bioavailability, undesirable side effects, frequent dosing and unpleasant organoleptic properties of conventional drug delivery systems. The process of nanoencapsulation involves the use of biomaterials such as surfactants and/or polymers, often in combination with charge inducers and/or ligands for targeting. The biomaterials selected for nanoencapsulation processes must be as biocompatible as possible. The type(s) of biomaterials used for different nanoencapsulation approaches are highlighted and their use and applicability with regard to haemo- and, histocompatibility, cytotoxicity, genotoxicity and carcinogenesis are discussed.