RESUMO
Hybrid materials consisting of functional organic molecules on metal oxide nanomaterials are key components in emerging technologies, for example in energy conversion and molecular electronics. In this work, we present the results of a comparative study of carboxyl-functionalized porphyrins on different oxide nanomaterials. Specifically, we investigated the interaction of 5(3-carboxyphenyl)-10,15,20-triphenyl-21,23H-porphyrin (2H-3-MCTPP) and 5(4-carboxyphenyl)-10,15,20-triphenyl-21,23H-porphyrin (2H-4-MCTPP), on MgO, TiO2, and Co3O4 nanoparticles (NPs) using isothermal and temperature-programmed diffuse reflection infrared Fourier transform spectroscopy (DRIFTS). We show that both porphyrins bind to the NPs, yielding stable monolayer films consisting of tilted surface carboxylates. In all cases, anchoring through the carboxylic acid group suppresses self-metalation of the porphyrin unit. Upon annealing, all anchored porphyrin films undergo metalation. The position of the acid group has no major influence on the reactivity. The same is true for the nature of the metal oxide, suggesting that the observed behaviour is general for most anchored porphyrin films on oxide nanomaterials.
RESUMO
This review focuses on exploring the intricate relationship between the catalyst particle size and shape on a nanoscale level and how it affects the performance of reactions. Drawing from decades of research, valuable insights have been gained. Intentionally shaping catalyst particles makes exposing a more significant percentage of reactive facets possible, enabling the control of overactive sites. In this study, the effectiveness of Co3O4 nanoparticles (NPs) with nanometric size as a catalyst is examined, with a particular emphasis on the coordination patterns between oxygen and cobalt atoms on the surface of these NPs. Investigating the correlation between the structure and reactivity of the exposed NPs reveals that the form of Co3O4 with nanometric size can be modified to tune its catalytic capabilities finely. Morphology-dependent nanocatalysis is often attributed to the advantageous exposure of reactive crystal facets accumulating numerous active sites. However, experimental evidences highlight the importance of considering the reorganization of NPs throughout their actions and the potential synergistic effects between nearby reactive and less-active aspects. Despite the significant role played by the atomic structure of Co3O4 NPs with nanometric size, limited attention has been given to this aspect due to challenges in high-resolution characterizations. To bridge this gap, this review strongly advocates for a comprehensive understanding of the relationship between the structure and reactivity through real-time observation of individual NPs during the operation. Proposed techniques enable the assessment of dimensions, configuration, and interfacial arrangement, along with the monitoring of structural alterations caused by fluctuating temperature and gaseous conditions. Integrating this live data with spectroscopic methods commonly employed in studying inactive catalysts holds the potential for an enhanced understanding of the fundamental active sites and the dynamic behavior exhibited in catalytic settings.
RESUMO
[This corrects the article DOI: 10.1016/j.isci.2024.110255.].
RESUMO
Layered double hydroxide (LDH) nanosheets as one type of two-dimensional materials have garnered increasing attention in the field of oxygen evolution reaction (OER) in recent decades. To address the challenges associated with poor conductivity and limited electron and charge transfer capability in LDH materials, we have developed a straightforward one-pot synthesis method to successfully fabricate a composite material with a microstructure resembling cabbage, which encompasses NiFe-LDH and nanocarbon (referred as NiFe-LDH@C). Atomic force microscopy (AFM) and high-resolution transmission electron microscopy (HRTEM) revealed that the monolayer NiFe-LDH with a height of ~0.5-0.8â nm is uniformly distributed and closely bonded to the carbon support, leading to a significant enhancement in conductivity and facilitating faster electron and charge transfer. Moreover, the NiFe-LDH@C exhibits a substantial number of surface defect sites, which enhances the interaction with oxygen species. This dual enhancement in charge transfer and oxygen species-mediated transfer greatly improves the catalytic OER performance, which is further corroborated by theoretical calculations. Notably, the Ni10Fe6-LDH@C with the highest concentration of surface oxygen vacancies demonstrated superior water oxidation performance, surpassing commercially available RuO2 catalysts; an OER overpotential of 231â mV@10â mA cm-2 with a Tafel slope of 71â mV dec-1 was achieved.
RESUMO
The effect on catalytic behavior induced by different morphology of NiO supports has been investigated using the example of gold-catalyzed CO oxidation. Three NiO-supported nanogold consisting of nanogold deposited onto NiO nanorods (NiO-R), nanosheet (NiO-S), and nanodiscs (NiO-D) were prepared. Transmission electron microscopy(TEM)/Scanning transmission electron microscopy(STEM) investigations indicated that Au particles dominantly exposed Au(111) facets virtually independent of NiO architectures. Au/NiO-S displayed a normal Arrhenius-type behavior. Au/NiO-R and Au/NiO-D showed an atypical behavior, characterized by a U-shaped curve of activity vs. temperature, which is attributed to the carbonate accumulation on whose catalytically active sites. On Au/NiO-R, a stable CO-conversion rate of 1.78 molCO gAu -1 h-1 at 30°C was achieved, which is among the higher rates reported so far for supported Au-based systems. DRIFTS measurement identified Auδ+ species as crucial CO adsorption sites promoting CO oxidation, and the catalytic CO oxidation should obey Mars-van Krevelen (<200°C) and Eley-Rideal mechanism (>240°C).
RESUMO
In this study, gold nanoparticles were dispersed on Co3O4 nanoplates, forming a specific Au-Co3O4 interface. Upon calcination at 300 °C in air, aberration-corrected STEM images evidenced that the gold nanoclusters (NCs) on Co3O4{111} were maintained at ca. 2.2 nm, which is similar to the size of the parent Au colloidal particles, demonstrating the stronger metal-support interaction (SMSI) on Co3O4{111}. Au/Co3O4{111} showed good catalytic activity (a full CO conversion achieved at 80 °C) and durability (over 10 hours) in CO oxidation, which was mainly due to the promotion by the surface oxygen vacancies and intrinsic defects of Co3O4{111} for activating O2 and by Au0, Auδ+, and Au+ species on the surface of gold NCs for CO activation, as evidenced by Raman and Fourier-transform infrared (FT-IR) spectroscopy analysis. Au/Co3O4 catalyzed CO oxidation obeyed the Langmuir-Hinshelwood mechanism at low temperatures.
RESUMO
The interfacial perimeter of nanogold and supports is often deemed as the catalytically active site for multiple reactions while the geometrical configuration of the interfacial perimeter at atomic scale is less studied. Herein, gold nanoparticles (NPs) of ca. 2.0 nm are dispersed on Co3O4 support in the shape of nanocubes (dominant Co3O4(001) facet) and nanoplates (Co3O4(111)), which forms different Au-Co3O4 interfaces with respect to the specific facet of the oxide support. A comparison is made on the basis of the interfacial structures and catalytic behavior of ethylene glycol oxidation. STEM analysis identifies that these metallic Au NPs interact with Co3O4 with an orientation relationship of Au/Co3O4(001) and Au/Co3O4(111). XPS and Raman spectroscopy investigations reveal the important variations in the reactivity of surface oxygen, surface Oads/OL ratio, and evolution of surface oxygen vacancies upon variation of the Co3O4 shape. Au/Co3O4-P exhibits much better catalytic activity than the Au/Co3O4-C counterpart in the aerobic oxidation of ethylene glycol, which is promoted by surface oxygen vacancies and intrinsic defects. It has been revealed that the surface oxygen vacancies participate in activating O2, thus making Co3O4-P a superior support for Au NPs in the catalysis of ethylene glycol oxidation.