Surface Curvature Enhances the Electrotunability of Ionic Liquid Lubrication.

Ionic liquids (ILs) are a promising class of lubricants that allow dynamic friction control at electrified interfaces. In the real world, surfaces inevitably exhibit some degree of roughness, which can influence lubrication. In this work, we deposited single-layer graphene onto 20 nm silica nanoparticle films to investigate the effect of surface curvature and electrostatic potential on both the lubricious behavior and interfacial layering structure of 1-ethyl-3-methyl imidazolium bis(trifluoromethylsulfonyl)imide on graphene. Normal force and friction force measurements were conducted by atomic force microscopy using a sharp silicon tip. Our results reveal that the friction coefficient at the lubricated tip-graphene contacts significantly depends on surface curvature. Two friction coefficients are measured on graphene peaks and valleys with a higher coefficient measured at lower loads (pressures), whereas only one friction coefficient is measured on smooth graphene. Moreover, the electrotunability of the friction coefficient at low loads is observed to be significantly enhanced in peaks and valleys compared with smooth graphene. This is associated with the promoted overscreening of surface charge on convex interfaces and the steric hindrance at concave interfaces, which leads to more layers of ions (electrostatically) bound to the surface, i.e., thicker boundary films (electrical double layers). This work opens new avenues to control IL lubrication on the nanoscale by combining topographic features and an electric field.

Two-Legged Molecular Walker and Curvature: Mechanochemical Ring Migration on Graphene.

Attaining controllable molecular motion at the nanoscale can be beneficial for multiple reasons, spanning from optoelectronics to catalysis. Here we study the movement of a two-legged molecular walker by modeling the migration of a phenyl aziridine ring on curved graphene. We find that directional ring migration can be attained on graphene in the cases of both 1D (wrinkled/rippled) and 2D (bubble-shaped) curvature. Using a descriptor approach based on graphene's frontier orbital orientation, we can understand the changes in binding energy of the ring as it translates across different sites with variable curvature and the kinetic barriers associated with ring migration. Additionally, we show that the extent of covalent bonding between graphene and the molecule at different sites directly controls the binding energy gradient, propelling molecular migration. Importantly, one can envision such walkers as carriers of charge and disruptors of local bonding. This study enables a new way to tune the electronic structure of two-dimensional materials for a range of applications.

Mechanistic model for quantifying the effect of impact force on mechanochemical reactivity.

Conventional mechanochemical synthetic tools, such as ball mills, offer no methodology to quantitatively link macroscale reaction parameters, such as shaking frequency or milling ball radius, to fundamental drivers of reactivity, namely the force vectors applied to the reactive molecules. As a result, although mechanochemistry has proven to be a valuable method to make a wide variety of products, the results are seldom reproduceable between reactors, difficult to rationally optimize, and hard to ascribe to a specific reaction pathway. Here we have developed a controlled force reactor, which is a mechanochemical ball mill reactor with integrated force measurement and control during each impact. We relate two macroscale reactor parameters-impact force and impact time-to thermodynamic and kinetic transition state theories of mechanochemistry utilizing continuum contact mechanics principles. We demonstrate force controlled particle fracture of NaCl to characterize particle size evolution during reactions, and force controlled reaction between anhydrous copper(II) chloride and (1, 10) phenanthroline. During the fracture of NaCl, we monitor the evolution of particle size as a function of impact force and find that particles quickly reach a particle size of ∼100 µm largely independent of impact force, and reach steady state 10-100× faster than reaction kinetics of typical mechanochemical reactions. We monitor the copper(II) chloride reactivity by measuring color change during reaction. Applying our transition state theory developed here to the reaction curves of copper(II) chloride and (1, 10) phenanthroline at multiple impact forces results in an activation energy barrier of 0.61 ± 0.07 eV, distinctly higher than barriers for hydrated metal salts and organic ligands and distinctly lower than the direct cleavage of the CuCl bond, indicating that the reaction may be mediated by the higher affinity of Fe in the stainless steel vessel to Cl. We further show that the results in the controlled force reactor match rudimentary estimations of impact force within a commercial ball mill reactor Retsch MM400. These results demonstrate the ability to quantitatively link macroscale reactor parameters to reaction properties, motivating further work to make mechanochemical synthesis quantitative, predictable, and fundamentally insightful.

Using Patterned Self-Assembled Monolayers to Tune Graphene-Substrate Interactions.

Graphene has unique mechanical, electronic, and optical properties that make it of interest for an array of applications. These properties can be modulated by controlling the architecture of graphene and its interactions with surfaces. Self-assembled monolayers (SAMs) can tailor graphene-surface interactions; however, spatially controlling these interactions remains a challenge. Here, we blend colloidal lithography with varying SAM chemistries to create patterned architectures that modify the properties of graphene based on its chemical interactions with the substrate and to study how these interactions are spatially arrayed. The patterned systems and their resulting structural, nanomechanical, and optical properties have been characterized using atomic force microscopy, Raman and infrared spectroscopies, scattering-type scanning near-field optical microscopy, and X-ray photoelectron spectroscopy.

Plug-and-Play Approach for Preparing Chromatin Containing Site-Specific DNA Modifications: The Influence of Chromatin Structure on Base Excision Repair.

The genomic DNA of eukaryotic cells exists in the form of chromatin, the structure of which controls the biochemical accessibility of the underlying DNA to effector proteins. In order to gain an in depth molecular understanding of how chromatin structure regulates DNA repair, detailed in vitro biochemical and biophysical studies are required. However, because of challenges associated with reconstituting nucleosome arrays containing site-specifically positioned DNA modifications, such studies have been limited to the use of mono- and dinucleosomes as model in vitro substrates, which are incapable of folding into native chromatin structures. To address this issue, we developed a straightforward and general approach for assembling chemically defined oligonucleosome arrays (i.e., designer chromatin) containing site-specifically modified DNA. Our method takes advantage of nicking endonucleases to excise short fragments of unmodified DNA, which are subsequently replaced with synthetic oligonucleotides containing the desired modification. Using this approach, we prepared several oligonucleosome substrates containing precisely positioned 2'-deoxyuridine (dU) residues and examined the efficiency of base excision repair (BER) within several distinct chromatin architectures. We show that, depending on the translational position of the lesion, the combined catalytic activities of uracil DNA glycosylase (UDG) and apurinic/apyrimidinic endonuclease 1 (APE1) can be either inhibited by as much as 20-fold or accelerated by more than 5-fold within compact chromatin (i.e., the 30 nm fiber) relative to naked DNA. Moreover, we demonstrate that digestion of dU by UDG/APE1 proceeds much more rapidly in mononucleosomes than in compacted nucleosome arrays, thereby providing the first direct evidence that internucleosome interactions play an important role in regulating BER within higher-order chromatin structures. Overall, this work highlights the value of performing detailed biochemical studies on precisely modified chromatin substrates in vitro and provides a robust platform for investigating DNA modifications in chromatin biology.

One-Pot Synthesis of Four Chlorin Derivatives by a Divergent Ylide.

Chlorins have unique photophysical properties that are exploited in diverse biological and materials applications. De novo chlorin synthesis with specific exocyclic motifs can be challenging and many are not stable to photobleaching and/or oxidation. A facile approach to a stable synthetic chlorin with a fused N-methyl pyrrolidine uses cyclo addition of a sarcosine-based azomethine ylide on 5,10,15,20-tetrakis(2,3,4,5,6-pentafluorophenyl)-porphyrin (TPPF20) is reported, but this approach has limitations. We report the synthesis of stable chlorin scaffolds starting with TPPF20 using a new glycine-based N-(hydroxymethyl)- N-methelenemethanideaminium ylide. Careful control of the 1,3-dipolar cycloaddition reaction allows a divergent use of the glycine derived ylide to yield four new chlorins, including the fused NH-pyrrolidine, two dimers, and the same N-methyl chlorin product from the sarcosine ylide reaction. The mechanism begins with the formation of a bis(hydroxymethyl)glycine, which then dehydrates and decarboxylates to form the active N-(hydroxymethyl)- N-methelenemethanideaminium ylide, which then reacts with TPPF20 to form a key N-(hydroxymethyl)-17,18-pyrrolidinyl-chlorin intermediate. Deformylation of this intermediate affords the (17,18-pyrrolidinyl)-chlorin, whereas a Cannizzaro-type reaction promotes a hydride attack to an imine chlorin cation to yield the N-methyl chlorin. The exocyclic NH-pyrrolidine provides a unique mode of attaching chiral moieties that avoids formation of diasteromers at the bridgehead carbons.

Practical, high-yield synthesis of thiol-terminated diacetylenes for formation of conductive monolayers.

Self-assembled monolayers of thiol terminated conjugated diacetylenes can be cross-linked using ultraviolet light to form highly conjugated polydiacetylenic conductive monolayers1; however, the reported syntheses of the diacetylene monomers present numerous problems that prevent the wide spread application of these in functional materials. We report a redesigned four-step synthesis that proceeds in 75-80 % overall yields and allows gram scale production of an array of thiol terminated conjugated diacetylenes, thereby allowing examination and application of these low-dimensional conductive materials.

Driving Surface Chemistry at the Nanometer Scale Using Localized Heat and Stress.

Driving and measuring chemical reactions at the nanoscale is crucial for developing safer, more efficient, and environment-friendly reactors and for surface engineering. Quantitative understanding of surface chemical reactions in real operating environments is challenging due to resolution and environmental limitations of existing techniques. Here we report an atomic force microscope technique that can measure reaction kinetics driven at the nanoscale by multiphysical stimuli in an ambient environment. We demonstrate the technique by measuring local reduction of graphene oxide as a function of both temperature and force at the sliding contact. Kinetic parameters measured with this technique reveal alternative reaction pathways of graphene oxide reduction previously unexplored with bulk processing techniques. This technique can be extended to understand and precisely tailor the nanoscale surface chemistry of any two-dimensional material in response to a wide range of external, multiphysical stimuli.

Effects of Direct Solvent-Quantum Dot Interaction on the Optical Properties of Colloidal Monolayer WS2 Quantum Dots.

Because of the absence of native dangling bonds on the surface of the layered transition metal dichalcogenides (TMDCs), the surface of colloidal quantum dots (QDs) of TMDCs is exposed directly to the solvent environment. Therefore, the optical and electronic properties of TMDCS QDs are expected to have stronger influence from the solvent than usual surface-passivated QDs due to more direct solvent-QD interaction. Study of such solvent effect has been difficult in colloidal QDs of TMDC due to the large spectroscopic heterogeneity resulting from the heterogeneity of the lateral size or (and) thickness in ensemble. Here, we developed a new synthesis procedure producing the highly uniform colloidal monolayer WS2 QDs exhibiting well-defined photoluminescence (PL) spectrum free from ensemble heterogeneity. Using these newly synthesized monolayer WS2 QDs, we observed the strong influence of the aromatic solvents on the PL energy and intensity of monolayer WS2 QD beyond the simple dielectric screening effect, which is considered to result from the direct electronic interaction between the valence band of the QDs and molecular orbital of the solvent. We also observed the large effect of stacking/separation equilibrium on the PL spectrum dictated by the balance between inter QD and QD-solvent interactions. The new capability to probe the effect of the solvent molecules on the optical properties of colloidal TMDC QDs will be valuable for their applications in various liquid surrounding environments.

Fabrication and Electrochemical Performance of Structured Mesoscale Open Shell V2O5 Networks.

Crystalline vanadium pentoxide (V2O5) has attracted significant interest as a potential cathode material for energy storage applications due to its high theoretical capacity. Unfortunately, the material suffers from low conductivity as well as slow lithium ion diffusion, both of which affect how fast the electrode can be charged/discharged and how many times it can be cycled. Colloidal crystal templating (CCT) provides a simple approach to create well-organized 3-D nanostructures of materials, resulting in a significant increase in surface area that can lead to marked improvements in electrochemical performance. Here, a single layer of open shell V2O5 architectures ca. 1 µm in height with ca. 100 nm wall thickness was fabricated using CCT, and the electrochemical properties of these assemblies were evaluated. A decrease in polarization effects, resulting from the higher surface area mesostructured features, was found to produce significantly enhanced electrochemical performance. The discharge capacity of an unpatterned thin film of V2O5 (∼8.1 µAh/cm2) was found to increase to ∼10.2 µAh/cm2 when the material was patterned by CCT, affording enhanced charge storage capabilities as well as a decrease in the irreversible degradation during charge-discharge cycling. This work demonstrates the importance of creating mesoscale electrode surfaces for improving the performance of energy storage devices and provides fundamental understanding of the means to improve device performance.

The influence of nearest-neighbour interactions and assembly dynamics on the transport properties of porphyrin supramolecular assemblies on Au(111).

Here we report on the effect of local molecular organization or "tertiary structure" on the charge transport properties of thiol-tethered tetraphenylporphyrin (ZnTPPF4-SC5SH) nanoscale clusters of ca. 5 nm in lateral dimension embedded within a dodecanethiol (C12) monolayer on Au(111). The structure of the clusters in the mixed monolayers and their resulting transport properties were monitored by Atomic Force Microscopy (AFM), Scanning Tunneling Microscopy (STM) and Spectroscopy (STS). The mixed films were deposited on Au(111) for a period of one to five days, during which the lateral dimensions of the ZnTPPF4-SC5SH islands that were formed after one day reduced by nearly 35% on average by five days, accompanied by a noticeable depletion of the surrounding C12 monolayer. These subtle changes in mixed monolayer morphology were accompanied by drastic differences in conductance. The ZnTPPF4-SC5SH clusters assembled for one day exhibited highly reproducible I-V spectra with simple tunneling behavior. By three days, this evolved into bias-induced switching of conductance, with a ∼100-1000 fold increase. Furthermore, current fluctuations started to become significant, and then dominated transport across the ZnTPPF4-SC5SH clusters assembled over five days. Our data suggests that this evolution can be understood by slow surface diffusion, enabling the ZnTPPF4-SC5SH molecules to overcome initial steric hindrance in the early stages of island formation in the C12 monolayer (at day one), to reach a more energetically-favored, close-packed organization, as noted by the decrease in island size (by day three). However, when desorption of the supporting matrix of C12 became pronounced (by day five), the ZnTPPF4-SC5SH clusters began to lose stabilization, and stochastic switching was then observed to dominate transport in the clusters, illustrating the critical nature of the local organization on these transport properties.

Fluorinated porphyrinoids as efficient platforms for new photonic materials, sensors, and therapeutics.

Porphyrinoids are robust heterocyclic dyes studied extensively for their applications in medicine and as photonic materials because of their tunable photophysical properties, diverse means of modifying the periphery, and the ability to chelate most transition metals. Commercial applications include their use as phthalocyanine dyes in optical discs, porphyrins in photodynamic therapy, and as oxygen sensors. Most applications of these dyes require exocyclic moieties to improve solubility, target diseases, modulate photophysical properties, or direct the self-organization into architectures with desired photonic properties. The synthesis of the porphyrinoid depends on the desired application, but the de novo synthesis often involves several steps, is time consuming, and results in low isolated yields. Thus, the application of core porphyrinoid platforms that can be rapidly and efficiently modified to evaluate new molecular architectures allows researchers to focus on the design concepts rather than the synthesis methods, and opens porphyrinoid chemistry to a broader scientific community. We have focused on several widely available, commercially viable porphyrinoids as platforms: meso-perfluorophenylporphyrin, perfluorophthalocyanine, and meso-perfluorophenylcorrole. The perfluorophenylporphyrin is readily converted to the chlorin, bacteriochlorin, and isobacteriochlorin. Derivatives of all six of these core platforms can be efficiently and controllably made via mild nucleophilic aromatic substitution reactions using primary S, N, and O nucleophiles bearing a wide variety of functional groups. The remaining fluoro groups enhance the photo and oxidative stability of the dyes and can serve as spectroscopic signatures to characterize the compounds or in imaging applications using (19)F NMR. This review provides an overview of the chemistry of fluorinated porphyrinoids that are being used as a platform to create libraries of photo-active compounds for applications in medicine and materials.

Utilizing atomistic simulations to map pressure distributions and contact areas in molecular adlayers within nanoscale surface-asperity junctions: a demonstration with octadecylsilane-functionalized silica interfaces.

To achieve a better understanding of the mechanical effects of adsorbed films at surface contacts, methods were developed to map and examine the pressure distribution of nanoasperity contacts, modeled by molecular dynamics simulation. The methods employ smoothing functions to project the atomic forces obtained in contact simulation onto the contact plane for fitting to standard continuum contact models and subsequent analysis. Importantly, these methods allow for contact evolution between nanoscopic asperity-asperity contacts to be examined because these are the central load-bearing junctions at interfaces. To demonstrate the application and features of this approach, it was employed to examine the evolution of contact between silica nanoasperities, with an increasing density of octadecyltrichlorosilane (OTS) films employed as a model adsorbate film. Linearly increasing contact radius and linearly decreasing maximal pressure were observed as a function of the film packing density. Because contact between the underlying, high-energy silica surfaces is undesirable, the evolution of silica contact was also examined using these same methods. As more molecules were introduced into the contact, a sharp transition was observed from the narrow, high-pressure interaction between the underlying substrates, to a broad, substantially lower pressure interaction, indicating a sharp transition from the dry to lubricated condition. To study the dependence of these behaviors on contact morphology, silica nanoasperities in contact with a flat silica surface were also examined. Similar behavior, including the broadening of the contact area and the minimization of direct surface contact, were observed. The method developed herein is applicable to a variety of systems and can be employed to optimize surface protection and pressure redistribution by boundary lubricants. This method can also be extended to AFM adhesion measurements where a detailed understanding of the true contact area is critical for the quantitative determinations of molecular forces and local surface mechanics.

Water in the Electrical Double Layer of Ionic Liquids on Graphene.

The performance of electrochemical devices using ionic liquids (ILs) as electrolytes can be impaired by water uptake. This work investigates the influence of water on the behavior of hydrophilic and hydrophobic ILs─with ethylsulfate and tris(perfluoroalkyl)trifluorophosphate or bis(trifluoromethyl sulfonyl)imide (TFSI) anions, respectively─on electrified graphene, a promising electrode material. The results show that water uptake slightly reduces the IL electrochemical stability and significantly influences graphene's potential of zero charge, which is justified by the extent of anion depletion from the surface. Experiments confirm the dominant contribution of graphene's quantum capacitance (CQ) to the total interfacial capacitance (Cint) near the PZC, as expected from theory. Combining theory and experiments reveals that the hydrophilic IL efficiently screens surface charge and exhibits the largest double layer capacitance (CIL ∼ 80 µF cm-2), so that CQ governs the charge stored. The hydrophobic ILs are less efficient in charge screening and thus exhibit a smaller capacitance (CIL ∼ 6-9 µF cm-2), which governs Cint already at small potentials. An increase in the total interfacial capacitance is observed at positive voltages for humid TFSI-ILs relative to dry ones, consistent with the presence of a satellite peak. Short-range surface forces reveal the change of the interfacial layering with potential and water uptake owing to reorientation of counterions, counterion binding, co-ion repulsion, and water enrichment. These results are consistent with the charge being mainly stored in a ∼2 nm-thick double layer, which implies that ILs behave as highly concentrated electrolytes. This knowledge will advance the design of IL-graphene-based electrochemical devices.

Reversible changes in solution pH resulting from changes in thermoresponsive polymer solubility.

Pendant groups on polymers that have lower-critical solution temperature (LCST) properties experience a water-like environment below the LCST where the polymer is soluble but are less hydrated above the LCST when the polymer phase separates from solution. When these pendant groups are amphoteric groups like carboxylate salts or ammonium salts, the change in solvation that accompanies the polymer precipitation event significantly changes these groups' acidity or basicity. These changes in acidity or basicity can lead to carboxylate salts forming carboxylic acid groups by capturing protons from the bulk solvent or ammonium salts reverting to the neutral amine by release of protons to the bulk solvent, respectively. When polymers like poly(N-isopropylacrylamide) that contain a sufficient loading of such comonomers are dissolved in solutions whose pH is near the pK(a) of the pendant acid or basic group and undergo an LCST event, the LCST event can change the bulk solution pH. These changes are reversible. These effects were visually followed using common indicators with soluble polymers and or by monitoring solution pH as a function of temperature. LCST events triggered by the addition of a kosmotropic salt lead to similar reversible solution pH changes.

Solute- and temperature-responsive "smart" grafts and supported membranes formed by covalent layer-by-layer assembly.

Polymers like poly(N-isopropylacrylamide) (PNIPAM) exhibit lower critical solution temperature (LCST) behavior. A variety of reports have shown that brush grafts of PNIPAM on surfaces exhibit similar temperature responsiveness. We recently described an alternative synthetic approach to such surfaces that affords surfaces with similar LCST-like behavior. We also noted how such surfaces' wettability can change in response to the identity and concentration of solutes. Here we show that this synthetic procedure can be extended to glass surfaces and to more complex surfaces present in porous glass frits. Functionalized glass surfaces exhibit solute-dependent wetting behavior analogous to that previously reported. We further show that the resulting responsive nanocomposite grafts on such frits exhibit "smart" responsive permeability with a greater than 1000-fold difference in permeability to water versus aqueous solutions of sodium sulfate. This "smart" permeability is ascribed to the solute-dependent wettability behavior of the responsive PNIPAM component of the nanocomposite graft, which is sensitive both to the identity and concentration of the solute anion and to temperature.