Chitosan-based nanocomposites for the repair of bone defects.

Chitosan scaffolds of different deacetylation degrees, average molecular weights and concentrations reinforced with silica nanoparticles were prepared for bone tissue regeneration. The resulting nanocomposites showed similar pore sizes (<300 µm) regardless the deacetylation degree and concentration used in their formulation. Their mechanical compression resistance was increased by a 30% with the addition of silica nanoparticles as nanofillers. The biocompatibility of the three-dimensional chitosan scaffolds was confirmed by the Alamar Blue assay in human primary osteoblasts as well as the formation of cell spheroids indicative of their great potential for bone regeneration. In vivo implantation of the scaffolds in a mice calvaria defect model provided substantial evidences of the suitability of these nanocomposites for bone tissue engineering showing a mature and dense collagenous tissue with small foci of mineralization, vascularized areas and the infiltration of osteoblasts and osteoclasts. Nevertheless, mature bone tissue formation was not observed after eight weeks of implantation.

Active multilayered capsules for in vivo bone formation.

Interest in the development of new sources of transplantable materials for the treatment of injury or disease has led to the convergence of tissue engineering with stem cell technology. Bone and joint disorders are expected to benefit from this new technology because of the low self-regenerating capacity of bone matrix secreting cells. Herein, the differentiation of stem cells to bone cells using active multilayered capsules is presented. The capsules are composed of poly-L-glutamic acid and poly-L-lysine with active growth factors embedded into the multilayered film. The bone induction from these active capsules incubated with embryonic stem cells was demonstrated in vitro. Herein, we report the unique demonstration of a multilayered capsule-based delivery system for inducing bone formation in vivo. This strategy is an alternative approach for in vivo bone formation. Strategies using simple chemistry to control complex biological processes would be particularly powerful, as they make production of therapeutic materials simpler and more easily controlled.

Three-dimensional sprayed active biological gels and cells for tissue engineering application.

Complex three-dimensional structures can "a priori" be built layer-by-layer with a large number of different components, including various cell types, polyelectrolytes, drugs, proteins, peptides or DNA. Our approach is based on the spraying of such elements in order to form a highly functionalized and structured biomaterial. The proposed route will allow the control at the surface and in depth the distribution of the different included elements (matrix and cells).The main objective of this work concerns the buildup of biomaterials aimed to reconstruct biological tissue. The proposed ways are highly innovative and consist in a simple and progressive spraying of all the elements constituting finally the biomaterial.We report here that it is possible (i) to build an alginate gel by alternate spraying of alginate and Ca(2+); (ii) to spray active alginate gel and cells; (iii) to build layer-by-layer an active reservoir under and on the top of this sprayed gel and cells; (iv) to follow the activity of these sprayed cells with time; (v) to propose a three-dimensional sprayed structure for tissue engineering application.

Bone Marrow Stromal Cells Promote Innervation of Bioengineered Teeth.

Transplantation of bone marrow mesenchymal stem cells (BMDCs) into a denervated side of the spinal cord was reported to be a useful option for axonal regeneration. The innervation of teeth is essential for their function and protection but does not occur spontaneously after injury. Cultured reassociations between dissociated embryonic dental mesenchymal and epithelial cells and implantation lead to a vascularized tooth organ regeneration. However, when reassociations were coimplanted with a trigeminal ganglion (TG), innervation did not occur. On the other hand, reassociations between mixed embryonic dental mesenchymal cells and bone marrow-derived cells isolated from green fluorescent protein (GFP) transgenic mice (BMDCs-GFP) (50/50) with an intact and competent dental epithelium (ED14) were innervated. In the present study, we verified the stemness of isolated BMDCs, confirmed their potential role in the innervation of bioengineered teeth, and analyzed the mechanisms by which this innervation can occur. For that purpose, reassociations between mixed embryonic dental mesenchymal cells and BMDCs-GFP with an intact and competent dental epithelium were cultured and coimplanted subcutaneously with a TG for 2 wk in ICR mice. Axons entered the dental pulp and reached the odontoblast layer. BMDCs-GFP were detected at the base of the tooth, with some being present in the pulp associated with the axons. Thus, while having a very limited contribution in tooth formation, they promoted the innervation of the bioengineered teeth. Using quantitative reverse transcription polymerase chain reaction and immunostainings, BMDCs were shown to promote innervation by 2 mechanisms: 1) via immunomodulation by reducing the number of T lymphocytes (CD3+, CD25+) in the implants and 2) by expressing neurotrophic factors such as NGF, BDNF, and NT3 for axonal growth. This strategy using autologous mesenchymal cells coming from bone marrow could be used to innervate bioengineered teeth without treatment with an immunosuppressor such as cyclosporine A (CsA), thus avoiding multiple side effects.

Porphyromonas gingivalis and its lipopolysaccharide differently modulate epidermal growth factor-dependent signaling in human gingival epithelial cells.

Periodontitis is an inflammatory disease induced by pathogenic bacteria such as Porphyromonas gingivalis. Little is known about epidermal growth factor (EGF) signals in human gingival epithelial cells (HGEC), which are major targets of P. gingivalis, and how the expression of proteins participating in EGF signaling-that is, EGF-receptor (EGFR), suppressor of cytokine signaling-3 (SOCS-3), interferon regulatory factor-1 (IRF-1), and signal transducers and activators of transcription (STAT-3)-are modified. This study aimed to assess the effects of P. gingivalis and its purified lipopolysaccharide (LPS-Pg) on EGF signaling. HGEC were infected for 2 h in a dose-dependent manner with P. gingivalis and with heat-killed P. gingivalis, and activated for 2 and 24 h by 1 µg/mL of purified LPS-Pg. Quantitative reverse transcription polymerase chain reaction and Western blotting were performed to measure mRNA and protein levels for SOCS-3, IRF-1 EGF, EGFR, and STAT-3. The tyrosine-phosphorylation status of STAT-3 was also examined. The results showed that infection of HGEC cells with P. gingivalis, but not with heat-killed P. gingivalis, led to significant reductions in expression levels of mRNAs and proteins for SOCS-3, IRF-1, and EGFR, while LPS-Pg over time significantly increased the expression of these mRNAs and proteins. Tyrosine-phosphorylation of STAT-3 was significantly increased during infection with P. gingivalis and activation by LPS-Pg but not modified during infection with heat-killed P. gingivalis. This study highlights that P. gingivalis and its purified LPS differentially modulated the expression of proteins (SOCS-3, IRF-1, EGFR, and STAT-3) interfering with EGF signaling.

Promoting bioengineered tooth innervation using nanostructured and hybrid scaffolds.

The innervation of teeth mediated by axons originating from the trigeminal ganglia is essential for their function and protection. Immunosuppressive therapy using Cyclosporine A (CsA) was found to accelerate the innervation of transplanted tissues and particularly that of bioengineered teeth. To avoid the CsA side effects, we report in this study the preparation of CsA loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles, their embedding on polycaprolactone (PCL)-based scaffolds and their possible use as templates for the innervation of bioengineered teeth. This PCL scaffold, approved by the FDA and capable of mimicking the extracellular matrix, was obtained by electrospinning and decorated with CsA-loaded PLGA nanoparticles to allow a local sustained action of this immunosuppressive drug. Dental re-associations were co-implanted with a trigeminal ganglion on functionalized scaffolds containing PLGA and PLGA/cyclosporine in adult ICR mice during 2weeks. Histological analyses showed that the designed scaffolds did not alter the teeth development after in vivo implantation. The study of the innervation of the dental re-associations by indirect immunofluorescence and transmission electron microscopy (TEM), showed that 88.4% of the regenerated teeth were innervated when using the CsA-loaded PLGA scaffold. The development of active implants thus allows their potential use in the context of dental engineering. STATEMENT OF SIGNIFICANCE: Tooth innervation is essential for their function and protection and this can be promoted in vivo using polymeric scaffolds functionalized with immunosuppressive drug-loaded nanoparticles. Immunosuppressive therapy using biodegradable nanoparticles loaded with Cyclosporine A was found to accelerate the innervation of bioengineered teeth after two weeks of implantation.

Three-dimensional Micro-culture System for Tooth Tissue Engineering.

The arrangement of cells within a tissue plays an essential role in organogenesis, including tooth development. Progress is being made to regenerate teeth by reassociating dissociated embryonic dental cells and implanting them in vivo. In the present study, we tested the hanging drop method to study mixed epithelial-mesenchymal cell reorganization in a liquid instead of semisolid medium to see whether it could lead to tooth histogenesis and organogenesis. This method allowed the control of the proportion and number of cells to be used, and the forming microtissues showed homogeneous size. The liquid environment favored cell migrations as compared with collagen gels. Three protocols were compared. The one that sequentially combined the hanging drop and semisolid medium cultures prior to in vivo implantation gave the best results. Indeed, after implantation, teeth developed, showing a well-formed crown, mineralization of dentin and enamel, and the initiation of root formation. Vascularization and the cellular heterogeneity in the mesenchyme were similar to what was observed in developing molars. Finally, after coimplantation with a trigeminal ganglion, the dental mesenchyme, including the odontoblast layer, became innervated. The real advantage of this technique is the small number of cells required to make a tooth. This experimental model can be employed to study the development, physiology, metabolism, or toxicology in forming teeth and test other cell sources.

Stem cells and applications: a survey.

Since the 1960s and the therapeutic use of hematopoietic stem cells of bone marrow origin, there has been increasing interest in the study of undifferentiated progenitors that have ability to proliferate and differentiate in different tissues. Different stem cells (SC) with different potential can be isolated and characterised. Despite the promise of embryonic stem cells, in many cases, adult stem cells provide a more interesting approach to clinical applications. It is undeniable that mesenchymal stem cells (MSC) from bone marrow, adipose tissue or MSC of Wharton Jelly, which have limited potential, are of interest for clinical applications in regenerative medicine because they are easily separated and prepared and no ethical problems are involved in their use.During the last 10 years, these multipotent cells have generated considerable interest and in particular have been shown to escape allogeneic immune response and be capable of immunomodulatory activity. These properties may be of a great interest for regenerative medicine. Different clinical applications are under study (cardiac insufficiency, atherosclerosis, stroke, bone, cartilage, diabetes, ophthalmology, urology, liver, organ's reconstruction…).

Bone formation induced by growth factors embedded into the nanostructured particles.

Tissue engineering has merged with stem cell biotechnology with development of new sources of transplantable biomaterials for the treatment of bone tissue diseases. Bone defects are expected to benefit from this new biotechnology because of the low self-regenerating capacity of bone matrix secreting cells. The differentiation of stem cells to bone cells using bi-functionalized multilayered particles is presented. The functionalized particles are composed of poly-glutamic acid (PGA) and poly-L-lysine (PLL) with two bone growth factors (BMP-2 and TGFbeta1) embedded into the multilayered film. The induction of bone from these bioactive particles incubated with embryonic stem cells was demonstrated in vitro. We report the demonstration of a multilayered particle-based delivery system for inducing bone formation in vivo. This new strategy is an alternative approach for in vivo bone formation.

Nano-odontology: nanostructured assemblies for endodontic regeneration.

The vitality of the pulp is so fundamental to the functional life of the tooth that new strategies are required to avoid the removal of the whole pulp following irreversible pulpitis and to regenerate the lost endodontic tissues. Nano-odontology would provide suitable solutions for pulp tissue conservative and regenerative approaches. In our group, we have shown that when covalently coupled to Poly-Glutamic Acid (PGA) the incorporation of an anti-inflammatory hormone (melanocortin, a-MSH) into the multilayered films Poly-L-Lysine (PLL)/PGA increases the anti-inflammatory reaction of pulp fibroblasts and macrophages stimulated by LPS (Lipo-Polysaccharides). Recently, usual linear PLL polymers have been chemically grafted for making new Dendrigraft polymers (DGLG4) whose higher branching ratios can give useful properties. The objective is to use nanostructured assemblies containing DGLG4 and PGA-alpha-MSH to design a new nanomaterial. These nanostructured assemblies (DGLG4-PGA-alpha-MSH)n constitute a thick reservoir of the anti-inflammatory peptide and promote adhesion and proliferation of pulp fibroblast on the biomaterial surface. These nanostructured films could be adapted for an endodontic regeneration application to target pulp connective tissue regeneration. Firstly, the crucial reduction of inflammation could be helpful by using PGA-alpha-MSH and secondly the initiation of the regeneration of the connective tissue will be promoted by the whole nanostructured film of which allows pulp cells colonisation.

Original approach for cartilage tissue engineering with mesenchymal stem cells.

Cartilage tissue engineering gives the ability to product adaptable neocartilage to lesion with autologous cells. Our work aimed to develop a stratified scaffold with a simple and progressive spraying build-up to mimic articular cartilage environment. An Alginate/Hyaluronic Acid (Alg/HA) hydrogel seeded with human Mesenchymal Stem Cells (hMSC) was construct by spray. First, cells repartition and actin organization were study with confocal microscopy. Then, we analyzed cells viability and finally, metabolic activity. Our results indicated a homogenous cells repartition in the hydrogel and a pericellular actin repartition. After 3 days of culture, we observed about 52% of viable cells in the scaffold. Then, from day 7 until the end of culture (D28), the proportion of living cells and their metabolic activity increased, what indicates that culture conditions are not harmful for the cells. We report here that sprayed method allowed to product a scaffold with hMSCs that confer a favorable environment for neocartilage construction: 3D conformation and ability of cells to increase their metabolic activity, therefore with few impact on hMSCs.