Copper(III) Metallacyclopentadienes via Zirconocene Transfer and Reductive Elimination to an Isolable Phenanthrocyclobutadiene.

Despite the widespread use of copper catalysis for the formation of C-C bonds, debate about the mechanism persists. Reductive elimination from Cu(III) is often invoked as a key step, yet examples of its direct observation from isolable complexes remain limited to only a few examples. Here, we demonstrate that incorporation of bulky mesityl (Mes) groups into the α-positions of a phenanthrene-appended zirconacyclopentadiene, Cp2Zr(2,5-Mes2-phenanthro[9,10]C4), enables efficient oxidative transmetalation to the corresponding, formal Cu(III) metallacyclopentadiene dimer. The dimer was quantitatively converted to a structurally analogous anionic monomer [nBu4N]{Cl2Cu(2,5-Mes2-phenanthro[9,10]C4)} upon treatment with [nBu4N][Cl]. Both metallacycles undergo quantitative reductive elimination upon heating to generate phenanthrocyclobutadiene and a Cu(I) species. Due to the steric protection provided by the mesityl groups, this cyclobutadiene was isolated and thoroughly characterized to reveal antiaromaticity comparable to that of free cyclobutadiene, which imbues it with a small highest occupied molecular orbital-lowest unoccupied molecular orbital energy gap of 1.85 eV and accessible reduced and oxidized electronic states.

Expanded [23]-Helicene with Exceptional Chiroptical Properties via an Iterative Ring-Fusion Strategy.

Expanded helicenes are an emerging class of helical nanocarbons composed of alternating linear and angularly fused rings, which give rise to an internal cavity and a large diameter. The latter is expected to impart exceptional chiroptical properties, but low enantiomerization free energy barriers (ΔG‡e) have largely precluded experimental interrogation of this prediction. Here, we report the syntheses of expanded helicenes containing 15, 19, and 23 rings on the inner helical circuit, using two iterations of an Ir-catalyzed, site-selective [2 + 2 + 2] reaction. This series of compounds displays a linear relationship between the number of rings and ΔG‡e. The expanded [23]-helicene, which is 7 rings longer than any known single carbohelicene and among the longest known all-carbon ladder oligomers, exhibits a ΔG‡e that is high enough (29.2 ± 0.1 kcal/mol at 100 °C in o-DCB) to halt enantiomerization at ambient temperature. This enabled the isolation of enantiopure samples displaying circular dichroism dissymmetry factors of ±0.056 at 428 nm, which are ≥1.7× larger than values for previously reported classical and expanded helicenes. Computational investigations suggest that this improved performance is the result of both the increased diameter and length of the [23]-helicene, providing guiding design principles for high dissymmetry molecular materials.

Scalable, Divergent Synthesis of a High Aspect Ratio Carbon Nanobelt.

Carbon nanobelts are molecules of high fundamental and technological interest due to their structural similarity to carbon nanotubes, of which they are molecular cutouts. Despite this attention, synthetic accessibility is a major obstacle, such that the few known strategies offer limited structural diversity, functionality, and scalability. To address this bottleneck, we have developed a new strategy that utilizes highly fused monomer units constructed via a site-selective [2 + 2 + 2] cycloaddition and a high-yielding zirconocene-mediated macrocyclization to achieve the synthesis of a new carbon nanobelt on large scale with the introduction of functional handles in the penultimate step. This nanobelt represents a diagonal cross section of an armchair carbon nanotube and consequently has a longitudinally extended structure with an aspect ratio of 1.6, the highest of any reported nanobelt. This elongated structure promotes solid-state packing into aligned columns that mimic the parent carbon nanotube and facilitates unprecedented host-guest chemistry with oligo-arylene guests in nonpolar solvents.

Elucidation of Diverse Solid-State Packing in a Family of Electron-Deficient Expanded Helicenes via Microcrystal Electron Diffraction (MicroED)*.

Solid-state packing plays a defining role in the properties of a molecular organic material, but it is difficult to elucidate in the absence of single crystals that are suitable for X-ray diffraction. Herein, we demonstrate the coupling of divergent synthesis with microcrystal electron diffraction (MicroED) for rapid assessment of solid-state packing motifs, using a class of chiral nanocarbons-expanded helicenes-as a proof of concept. Two highly selective oxidative dearomatizations of a readily accessible helicene provided a divergent route to four electron-deficient analogues containing quinone or quinoxaline units. Crystallization efforts consistently yielded microcrystals that were unsuitable for single-crystal X-ray diffraction, but ideal for MicroED. This technique facilitated the elucidation of solid-state structures of all five compounds with <1.1 Šresolution. The otherwise-inaccessible data revealed a range of notable packing behaviors, including four different space groups, homochirality in a crystal for a helicene with an extremely low enantiomerization barrier, and nanometer scale cavities.

Shape-Selective Synthesis of Pentacene Macrocycles and the Effect of Geometry on Singlet Fission.

Pentacene's extraordinary photophysical and electronic properties are highly dependent on intermolecular through-space interactions. Macrocyclic arrangements of chromophores have been shown to provide a high level of control over these interactions, but few examples exist for pentacene due to inherent synthetic challenges. In this work, zirconocene-mediated alkyne coupling was used as a dynamic covalent C-C bond forming reaction to synthesize two geometrically distinct, pentacene-containing macrocycles on a gram scale and in four or fewer steps. Both macrocycles undergo singlet fission in solution with rates that differ by an order of magnitude, while the rate of triplet recombination is approximately the same. This independent modulation of singlet and triplet decay rates is highly desirable for the design of efficient singlet fission materials. The dimeric macrocycle adopts a columnar packing motif in the solid state with large void spaces between pentacene units of the crystal lattice.

Critical Sensing Modalities for Hydrogen: Technical Needs and Status of the Field to Support a Changing Energy Landscape.

Decarbonization of the energy system is a key aspect of the energy transition. Energy storage in the form of chemical bonds has long been viewed as an optimal scheme for energy conversion. With advances in systems engineering, hydrogen has the potential to become a low cost, low emission, energy carrier. However, hydrogen is difficult to contain, it exhibits a low flammability limit (>40000 ppm or 4%), low ignition energy (0.02 mJ), and it is a short-lived climate forcer. Beyond commercially available sensors to ensure safety through spot checks in enclosed environments, new sensors are necessary to support the development of low emission infrastructure for production, transmission, storage, and end use. Efficient scalable broad area hydrogen monitoring motivates lowering the detection limit below that (10 ppm) of best in class commercial technologies. In this perspective, we evaluate recent advances in hydrogen gas sensing to highlight technologies that may find broad utility in the hydrogen sector. It is clear in the near term that a sensor technology suite is required to meet the variable constraints (e.g., power, size/weight, connectivity, cost) that characterize the breadth of the application space, ranging from industrial complexes to remote pipelines. This perspective is not intended to be another standard hydrogen sensor review, but rather provide a critical evaluation of technologies with detection limits preferably below 1 ppm and low power requirements. Given projections for rapid market growth, promising techniques will also be amenable to rapid development in technical readiness for commercial deployment. As such, methods that do not meet these requirements will not be considered in depth.

A sequential cyclization/π-extension strategy for modular construction of nanographenes enabled by stannole cycloadditions.

The synthesis of polycyclic aromatic hydrocarbons (PAHs) and related nanographenes requires the selective and efficient fusion of multiple aromatic rings. For this purpose, the Diels-Alder cycloaddition has proven especially useful; however, this approach currently faces significant limitations, including the lack of versatile strategies to access annulated dienes, the instability of the most commonly used dienes, and difficulties with aromatization of the [4 + 2] adduct. In this report we address these limitations via the marriage of two powerful cycloaddition strategies. First, a formal Cp2Zr-mediated [2 + 2 + 1] cycloaddition is used to generate a stannole-annulated PAH. Secondly, the stannoles are employed as diene components in a [4 + 2] cycloaddition/aromatization cascade with an aryne, enabling π-extension to afford a larger PAH. This discovery of stannoles as highly reactive - yet stable for handling - diene equivalents, and the development of a modular strategy for their synthesis, should significantly extend the structural scope of PAHs accessible by a [4 + 2] cycloaddition approach.

Site-selective [2 + 2 + n] cycloadditions for rapid, scalable access to alkynylated polycyclic aromatic hydrocarbons.

Polycyclic aromatic hydrocarbons (PAHs) are attractive synthetic building blocks for more complex conjugated nanocarbons, but their use for this purpose requires appreciable quantities of a PAH with reactive functional groups. Despite tremendous recent advances, most synthetic methods cannot satisfy these demands. Here we present a general and scalable [2 + 2 + n] (n = 1 or 2) cycloaddition strategy to access PAHs that are decorated with synthetically versatile alkynyl groups and its application to seven structurally diverse PAH ring systems (thirteen new alkynylated PAHs in total). The critical discovery is the site-selectivity of an Ir-catalyzed [2 + 2 + 2] cycloaddition, which preferentially cyclizes tethered diyne units with preservation of other (peripheral) alkynyl groups. The potential for generalization of the site-selectivity to other [2 + 2 + n] reactions is demonstrated by identification of a Cp2Zr-mediated [2 + 2 + 1]/metallacycle transfer sequence for synthesis of an alkynylated, selenophene-annulated PAH. The new PAHs are excellent synthons for macrocyclic conjugated nanocarbons. As a proof of concept, four were subjected to alkyne metathesis catalysis to afford large, PAH-containing arylene ethylene macrocycles, which possess a range of cavity sizes reaching well into the nanometer regime. Notably, these high-yielding macrocyclizations establish that synthetically convenient pentynyl groups can be effective for metathesis since the 4-octyne byproduct is sequestered by 5 Å MS. Most importantly, this work is a demonstration of how site-selective reactions can be harnessed to rapidly build up structural complexity in a practical, scalable fashion.