CD22L Conjugation to Insulin Attenuates Insulin-Specific B Cell Activation.

Pancreatic islet-reactive B lymphocytes promote Type 1 diabetes (T1D) by presenting an antigen to islet-destructive T cells. Teplizumab, an anti-CD3 monoclonal, delays T1D onset in patients at risk, but additional therapies are needed to prevent the disease entirely. Therefore, bifunctional molecules were designed to selectively inhibit T1D-promoting anti-insulin B cells by conjugating a ligand for the B cell inhibitory receptor CD22 (i.e., CD22L) to insulin, which permit these molecules to concomitantly bind to anti-insulin B cell receptors (BCRs) and CD22. Two prototypes were synthesized: 2:2 insulin-CD22L conjugate on a 4-arm PEG backbone, and 1:1 insulin-CD22L direct conjugate. Transgenic mice (125TgSD) expressing anti-insulin BCRs provided cells for in vitro testing. Cells were cultured with constructs for 3 days, then assessed by flow cytometry. Duplicate wells with anti-CD40 simulated T cell help. A 2-insulin 4-arm PEG control caused robust proliferation and activation-induced CD86 upregulation. Anti-CD40 further boosted these effects. This may indicate that BCR-cross-linking occurs when antigens are tethered by the PEG backbone as soluble insulin alone has no effect. Addition of CD22L via the 2:2 insulin-CD22L conjugate restored B cell properties to that of controls without an additional beneficial effect. In contrast, the 1:1 insulin-CD22L direct conjugate significantly reduced anti-insulin B cell proliferation in the presence of anti-CD40. CD22L alone had no effect, and the constructs did not affect the WT B cells. Thus, multivalent antigen constructs tend to activate anti-insulin B cells, while monomeric antigen-CD22L conjugates reduce B cell activation in response to simulated T cell help and reduce pathogenic B cell numbers without harming normal cells. Therefore, monomeric antigen-CD22L conjugates warrant futher study and may be promising candidates for preclinical trials to prevent T1D without inducing immunodeficiency.

Design of a Tumor Binding GMCSF as Intratumoral Immunotherapy of Solid Tumors.

Next-generation cancer immunotherapies may utilize immunostimulants to selectively activate the host immune system against tumor cells. Checkpoint inhibitors (CPIs) like anti-PD1/PDL-1 that inhibit immunosuppression have shown unprecedented success but are only effective in the 20-30% of patients that possess an already "hot" (immunogenic) tumor. In this regard, intratumoral (IT) injection of immunostimulants is a promising approach since they can work synergistically with CPIs to overcome the resistance to immunotherapies by inducing immune stimulation in the tumor. One such immunostimulant is granulocyte macrophage-colony-stimulating factor (GMCSF) that functions by recruiting and activating antigen-presenting cells (dendritic cells) in the tumor, thereby initiating anti-tumor immune responses. However, key problems with GMCSF are lack of efficacy and the risk of systemic toxicity caused by the leakage of GMCSF from the tumor tissue. We have designed tumor-retentive versions of GMCSF that are safe yet potent immunostimulants for the local treatment of solid tumors. The engineered GMCSFs (eGMCSF) were synthesized by recombinantly fusing tumor-ECM (extracellular matrix) binding peptides to GMCSF. The eGMCSFs exhibited enhanced tumor binding and potent immunological activity in vitro and in vivo. Upon IT administration, the tumor-retentive eGMCSFs persisted in the tumor, thereby alleviating systemic toxicity, and elicited localized immune activation to effectively turn an unresponsive immunologically "cold" tumor "hot".

Multivalent Scaffolds to Promote B cell Tolerance.

Autoimmune diseases are characterized by aberrant immune responses toward self-antigens. Current treatments lack specificity, promoting adverse effects by broadly suppressing the immune system. Therapies that specifically target the immune cells responsible for disease are a compelling strategy to mitigate adverse effects. Multivalent formats that display numerous binding epitopes off a single scaffold may enable selective immunomodulation by eliciting signals through pathways unique to the targeted immune cells. However, the architecture of multivalent immunotherapies can vary widely, and there is limited clinical data with which to evaluate their efficacy. Here, we set forth to review the architectural properties and functional mechanisms afforded by multivalent ligands and evaluate four multivalent scaffolds that address autoimmunity by altering B cell signaling pathways. First, we address both synthetic and natural polymer backbones functionalized with a variety of small molecule, peptide, and protein ligands for probing the effects of valency and costimulation. Then, we review nanoparticles composed entirely from immune signals which have been shown to be efficacious. Lastly, we outline multivalent liposomal nanoparticles capable of displaying high numbers of protein antigens. Taken together, these examples highlight the versatility and desirability of multivalent ligands for immunomodulation and illuminate strengths and weaknesses of multivalent scaffolds for treating autoimmunity.

Novel 3D Force Sensors for a Cost-Effective 3D Force Plate for Biomechanical Analysis.

Three-dimensional force plates are important tools for biomechanics discovery and sports performance practice. However, currently, available 3D force plates lack portability and are often cost-prohibitive. To address this, a recently discovered 3D force sensor technology was used in the fabrication of a prototype force plate. Thirteen participants performed bodyweight and weighted lunges and squats on the prototype force plate and a standard 3D force plate positioned in series to compare forces measured by both force plates and validate the technology. For the lunges, there was excellent agreement between the experimental force plate and the standard force plate in the X-, Y-, and Z-axes (r = 0.950-0.999, p < 0.001). For the squats, there was excellent agreement between the force plates in the Z-axis (r = 0.996, p < 0.001). Across axes and movements, root mean square error (RMSE) ranged from 1.17% to 5.36% between force plates. Although the current prototype force plate is limited in sampling rate, the low RMSEs and extremely high agreement in peak forces provide confidence the novel force sensors have utility in constructing cost-effective and versatile use-case 3D force plates.

Glatiramer Acetate Complexed with CpG as Intratumoral Immunotherapy in Combination with Anti-PD-1.

CpG oligodeoxynucleotides are toll-like receptor 9 agonists capable of inducing potent pro-inflammatory immune responses. Although CpG oligodeoxynucleotides have shown promising antitumor effects, their systemic activity can trigger immune-related toxicity, limiting therapeutic application. We previously identified glatiramer acetate (GA), a cationic polypeptide approved for the treatment of relapsing-remitting multiple sclerosis, as an intratumoral delivery agent capable of complexing with CpG, thereby pinning it to the injection site and limiting systemic exposure. Here, we investigated whether the combination of CpG or GA-CpG polyplexes and intraperitoneal anti-PD-1 therapy would result in synergistic efficacy in AT84 and CT26 murine syngeneic models of head and neck and colon cancers, respectively. In both AT84 and CT26 tumor models, intratumoral CpG or GA-CpG treatment similarly suppressed tumor growth, but the efficacy was not amplified with anti-PD-1. Nevertheless, combination treatment increased cytotoxic T cell, helper T cell, and natural killer cell infiltration into AT84 tumors. Surprisingly, the combination of intratumoral GA and intraperitoneal anti-PD-1 treatment resulted in elevated systemic GM-CSF and IL-2 cytokine levels and demonstrated synergistic antitumor effects in the CT26 mouse tumor model. Moreover, tumors that responded most significantly to anti-PD-1 plus GA treatment showed increased markers of infiltration of CD4+ T cells and natural killer cells. Combinations of intratumoral GA or GA-CpG polyplexes with anti-PD-1 treatment warrant further investigation as combination cancer immunotherapy strategies.

Autoantigen Tetramer Silences Autoreactive B Cell Populations.

Many autoimmune therapies focus on immune suppression to reduce symptom severity and halt disease progression; however, currently approved treatments lack specificity for the autoantigen and rely on more global immune suppression. Multivalent antigen arrays can disarm pathogenic autoimmune B cell populations that specifically recognize the antigen of interest via their B cell receptor (BCR). Disarmament may be achieved by BCR engagement, cross-linking, and sustained receptor occupancy as a result of multivalent, high avidity BCR binding. To engage and explore this mechanism, a tetramer display of the encephalogenic proteolipid peptide (PLP139-151), referred to as 4-arm PLP139-151, was synthesized by copper-catalyzed azide-alkyne cycloaddition chemistry. Subcutaneous administration of 4-arm PLP139-151 completely ameliorated symptoms of paralysis in a mouse model of multiple sclerosis known as experimental autoimmune encephalomyelitis. Competitive binding of 4-arm PLP139-151 to PLP139-151-specific IgG in the mouse serum demonstrated the enhanced avidity associated with the multivalent array compared to the free peptide. Furthermore, key PLP139-151-reactive B cells were depleted following 4-arm PLP139-151 treatment, resulting in significant reduction of proinflammatory cytokines. Together, these data demonstrate the potential of 4-arm PLP139-151 to silence autoreactive B cell populations and limit the downstream activation of effector cells.

Flow Behavior Prior to Crosslinking: The Need for Precursor Rheology for Placement of Hydrogels in Medical Applications and for 3D Bioprinting.

Hydrogels - water swollen cross-linked networks - have demonstrated considerable promise in tissue engineering and regenerative medicine applications. However, ambiguity over which rheological properties are needed to characterize these gels before crosslinking still exists. Most hydrogel research focuses on the performance of the hydrogel construct after implantation, but for clinical practice, and for related applications such as bioinks for 3D bioprinting, the behavior of the pre-gelled state is also critical. Therefore, the goal of this review is to emphasize the need for better rheological characterization of hydrogel precursor formulations, and standardized testing for surgical placement or 3D bioprinting. In particular, we consider engineering paste or putty precursor solutions (i.e., suspensions with a yield stress), and distinguish between these differences to ease the path to clinical translation. The connection between rheology and surgical application as well as how the use of paste and putty nomenclature can help to qualitatively identify material properties are explained. Quantitative rheological properties for defining materials as either pastes or putties are proposed to enable easier adoption to current methods. Specifically, the three-parameter Herschel-Bulkley model is proposed as a suitable model to correlate experimental data and provide a basis for meaningful comparison between different materials. This model combines a yield stress, the critical parameter distinguishing solutions from pastes (100-2000 Pa) and from putties (>2000 Pa), with power law fluid behavior once the yield stress is exceeded. Overall, successful implementation of paste or putty handling properties to the hydrogel precursor may minimize the surgeon-technology learning time and ultimately ease incorporation into current practice. Furthermore, improved understanding and reporting of rheological properties will lead to better theoretical explanations of how materials affect rheological performances, to better predict and design the next generation of biomaterials.

Glatiramer Acetate (Copaxone) is a Promising Gene Delivery Vector.

Glatiramer acetate (GA) is the active substance of Teva's Copaxone drug, which contains random polypeptides used to treat multiple sclerosis. Glatiramer acetate was originally developed to emulate human myelin basic protein, which contains four different residues [alanine (A), glutamic acid (E), tyrosine (T), and lysine (K)]. We found that GA can complex, condense, and transfect plasmid DNA. Mixing the positively charged GA and the negatively charged genetic material in correct proportions produced small, stable, and highly positively charged nanoparticles. This simple GA-pDNA formulation produced high levels of transfection efficiency with low toxicity in HeLa and A549 cells (lung and cervical cancer cells). Additionally, we studied and compared the nanoparticle properties, gene expression, and cytotoxicity of K100-pDNA (high-molecular-weight polylysine) and K9-pDNA (low-molecular-weight polylysine) nanoparticles to those of GA-pDNA nanoparticles. We also studied the effect of calcium, which was previously reported to reduce the size and enhance gene expression resulting from similar polyelectrolyte complexes. Adding calcium did not reduce particle size, nor improve the transfection efficiency of GA-pDNA nanoparticles as it did for polylysine-pDNA nanoparticles. GA-pDNA nanoparticles may be prepared by mixing a genetic payload with approved GA therapeutics (e.g., Copaxone), thus offering intriguing possibilities for translational gene therapy studies.

Tocopherol Emulsions as Functional Autoantigen Delivery Vehicles Evoke Therapeutic Efficacy in Experimental Autoimmune Encephalomyelitis.

Contemporary approaches to treating autoimmune diseases like multiple sclerosis broadly modulate the immune system and leave patients susceptible to severe adverse effects. Antigen-specific immunotherapies (ASIT) offer a unique opportunity to selectively suppress autoreactive cell populations but have suffered from marginal efficacy even when employing traditional adjuvants to improve delivery. The development of immunologically active antigen delivery vehicles could potentially increase the clinical success of antigen-specific immunotherapies. An emulsion of the antioxidant tocopherol delivering an epitope of proteolipid protein autoantigen (PLP139-151) yielded significant efficacy in mice with experimental autoimmune encephalomyelitis (EAE). In vitro studies indicated tocopherol emulsions reduced oxidative stress in antigen-presenting cells. Ex vivo analysis revealed that tocopherol emulsions shifted cytokine responses in EAE splenocytes. In addition, IgG responses against PLP139-151 were increased in mice treated with tocopherol emulsions delivering the antigen, suggesting a possible skew in immunity. Overall, tocopherol emulsions provide a functional delivery vehicle for ASIT capable of ameliorating autoimmunity in a murine model.

Microsphere-Based Scaffolds in Regenerative Engineering.

Microspheres have long been used in drug delivery applications because of their controlled release capabilities. They have increasingly served as the fundamental building block for fabricating scaffolds for regenerative engineering because of their ability to provide a porous network, offer high-resolution control over spatial organization, and deliver growth factors/drugs and/or nanophase materials. Because they provide physicochemical gradients via spatiotemporal release of bioactive factors and nanophase ceramics, microspheres are a desirable tool for engineering complex tissues and biological interfaces. In this review we describe various methods for microsphere fabrication and sintering, and elucidate how these methods influence both micro- and macroscopic scaffold properties, with a special focus on the nature of sintering. Furthermore, we review key applications of microsphere-based scaffolds in regenerating various tissues. We hope to inspire researchers to join a growing community of investigators using microspheres as tissue engineering scaffolds so that their full potential in regenerative engineering may be realized.

Practical Considerations, Challenges, and Limitations of Bioconjugation via Azide-Alkyne Cycloaddition.

Interrogating biological systems is often limited by access to biological probes. The emergence of "click chemistry" has revolutionized bioconjugate chemistry by providing facile reaction conditions amenable to both biologic molecules and small molecule probes such as fluorophores, toxins, or therapeutics. One particularly popular version is the copper-catalyzed azide-alkyne cycloaddition (AAC) reaction, which has spawned new alternatives such as the strain-promoted azide-alkyne cycloaddition reaction, among others. This focused review highlights practical approaches to AAC reactions for the synthesis of peptide or protein bioconjugates and contrasts current challenges and limitations in light of recent advances in the field. The conical success of antibody drug conjugates has expanded the toolbox of linkers and payloads to facilitate practical applications of bioconjugation to create novel therapeutics and biologic probes. The AAC reaction in particular is poised to enable a large set of functionalized molecules as a combinatorial approach to high-throughput bioconjugate generation, screening, and honing of lead compounds.

Hyaluronic-Acid-Hydroxyapatite Colloidal Gels Combined with Micronized Native ECM as Potential Bone Defect Fillers.

One of the grand challenges in translational regenerative medicine is the surgical placement of biomaterials. For bone regeneration in particular, malleable and injectable colloidal gelsare frequently designed to exhibit self-assembling and shear-response behavior which facilitates biomaterial placement in tissue defects. The current study demonstrated that by combining native extracellular matrix (ECM) microparticles, i.e., demineralized bone matrix (DBM) and decellularized cartilage (DCC), with hyaluronic acid (HA) and hydroxyapatite (HAP) nanoparticles, a viscoelastic colloidal gel consisting exclusively of natural materials was achieved. Rheological testing of HA-ECM suspensions and HA-HAP-ECM colloidal gels concluded either equivalent or substantially higher storage moduli (G' ≈ 100-10 000 Pa), yield stresses (τy ≈ 100-1000 Pa), and viscoelastic recoveries (G'recovery ≥ 87%) in comparison with controls formulated without ECM, which indicated a previously unexplored synergy in fluid properties between ECM microparticles and HA-HAP colloidal networks. Notable rheological differences were observed between respective DBM and DCC formulations, specifically in HA-HAP-DBM mixtures, which displayed a mean 3-fold increase in G' and a mean 4-fold increase in τy from corresponding DCC mixtures. An initial in vitro assessment of these potential tissue fillers as substrates for cell growth revealed that all formulations of HA-ECM and HA-HAP-ECM showed no signs of cytotoxicity and appeared to promote cell viability. Both DBM and DCC colloidal gels represent promising platforms for future studies in bone and cartilage tissue engineering. Overall, the current study identified colloidal gels constructed exclusively of natural materials, with viscoelastic properties that may facilitate surgical placement for a wide variety of therapeutic applications.

Charge Type, Charge Spacing, and Hydrophobicity of Arginine-Rich Cell-Penetrating Peptides Dictate Gene Transfection.

Noncovalent complexation of plasmid DNA (pDNA) with cell-penetrating peptides (CPPs) forms relatively large complexes with poor gene expression. Yet, condensing these CPP-pDNA complexes via addition of calcium chloride produces small and stable nanoparticles with high levels of gene expression. This simple formulation offered high transfection efficiency and negligible cytotoxicity in HEK-293 (a virus-immortalized kidney cell) and A549 (a human lung cancer cell line). Small changes in CPP charge type, charge spacing, and hydrophobicity were studied by using five arginine-rich CPPs: the well-known hydrophilic polyarginine R9 peptide, a hydrophilic RH9 peptide, and three amphiphilic peptides (RA9, RL9, and RW9) with charge distributions that favor membrane penetration. R9 and RW9 nanoparticles were significantly more effective than the other CPPs under most formulation conditions. However, these CPPs exhibit large differences in membrane penetration potential. Maximum transfection resulted from an appropriate balance of complexing with pDNA, releasing DNA, and membrane penetration potential.

Microsphere-based scaffolds encapsulating tricalcium phosphate and hydroxyapatite for bone regeneration.

Bioceramic mixtures of tricalcium phosphate (TCP) and hydroxyapatite (HAp) are widely used for bone regeneration because of their excellent cytocompatibility, osteoconduction, and osteoinduction. Therefore, we hypothesized that incorporation of a mixture of TCP and HAp in microsphere-based scaffolds would enhance osteogenesis of rat bone marrow stromal cells (rBMSCs) compared to a positive control of scaffolds with encapsulated bone-morphogenic protein-2 (BMP-2). Poly(D,L-lactic-co-glycolic acid) (PLGA) microsphere-based scaffolds encapsulating TCP and HAp mixtures in two different ratios (7:3 and 1:1) were fabricated with the same net ceramic content (30 wt%) to evaluate how incorporation of these ceramic mixtures would affect the osteogenesis in rBMSCs. Encapsulation of TCP/HAp mixtures impacted microsphere morphologies and the compressive moduli of the scaffolds. Additionally, TCP/HAp mixtures enhanced the end-point secretion of extracellular matrix components relevant to bone tissue compared to the "blank" (PLGA-only) microsphere-based scaffolds as evidenced by the biochemical, gene expression, histology, and immunohistochemical characterization. Moreover, the TCP/HAp mixture groups even surpassed the BMP-2 positive control group in some instances in terms of matrix synthesis and gene expression. Lastly, gene expression data suggested that the rBMSCs responded differently to different TCP/HAp ratios presented to them. Altogether, it can be concluded that TCP/HAp mixtures stimulated the differentiation of rBMSCs toward an osteoblastic phenotype, and therefore may be beneficial in gradient microsphere-based scaffolds for osteochondral regeneration.

Effect of lipid headgroup charge and pH on the stability and membrane insertion potential of calcium condensed gene complexes.

Noncovalently condensed complexes of genetic material, cell penetrating peptides (CPPs), and calcium chloride present a nonviral route to improve transfection efficiency of nucleic acids (e.g., pDNA and siRNA). However, the exact mechanisms of membrane insertion and delivery of macromolecule complexes to intracellular locations as well as their stability in the intracellular environment are not understood. We show that calcium condensed gene complexes containing different hydrophilic (i.e., dTAT, K9, R9, and RH9) and amphiphilic (i.e., RA9, RL9, and RW9) CPPs formed stable cationic complexes of hydrodynamic radii 100 nm at neutral pH. However, increasing the acidity caused the complexes to become neutral or anionic and increase in size. Using zwitterionic and anionic phospholipid monolayers as models that mimic the membrane composition of the outer leaflet of cell membranes and intracellular vesicles and pHs that mimic the intracellular environment, we study the membrane insertion potential of these seven gene complexes (CPP/pDNA/Ca(2+) complexes) into model membranes. At neutral pH, all gene complexes demonstrated the highest insertion potential into anionic phospholipid membranes, with complexes containing amphiphilic peptides showing the maximum insertion. However, at acidic pH, the gene complexes demonstrated maximum monolayer insertion into zwitterionic lipids, irrespective of the chemical composition of the CPP in the complexes. Our results suggest that in the neutral environment the complexes are unable to penetrate the zwitterionic lipid membranes but can penetrate through the anionic lipid membranes. However, the acidic pH mimicking the local environment in the late endosomes leads to a significant increase in adsorption of the complexes to zwitterionic lipid headgroups and decreases for anionic headgroups. These membrane-gene complex interactions may be responsible for the ability of the complexes to efficiently enter the intracellular environment through endocytosis and escape from the endosomes to effectively deliver their genetic payload.

Mapping glycosaminoglycan-hydroxyapatite colloidal gels as potential tissue defect fillers.

Malleable biomaterials such as Herschel-Bulkley (H-B) fluids possess shear responsive rheological properties and are capable of self-assembly and viscoelastic recovery following mechanical disruption (e.g., surgical placement via injection or spreading). This study demonstrated that the addition of moderate molecular weight glycosaminoglycans (GAGs) such as chondroitin sulfate (CS) (Mw = 15-30 kDa) and hyaluronic acid (HA) (Mw = 20-41 kDa) can be used to modify several rheological properties including consistency index (K), flow-behavior index (n), and yield stress (τy) of submicrometer hydroxyapatite (HAP) (Davg ≤ 200 nm) colloidal gels. GAG-HAP colloidal mixtures exhibited substantial polymer-particle synergism, likely due to "bridging" flocculation, which led to a synergistic increase in consistency index (KGAG-HAP ≥ KGAG + KHAP) without compromising shear-thinning behavior (n < 1) of the gel. In addition, GAG-HAP colloids containing high concentrations of HAP (60-80% w/v) exhibited substantial yield stress (τy ≥ 100 Pa) and viscoelastic recovery properties (G'recovery ≥ 64%). While rheological differences were observed between CS-HAP and HA-HAP colloidal gels, both CS and HA represent feasible options for future studies involving bone defect filling. Overall, this study identified mixture regions where rheological properties in CS-HAP and HA-HAP colloidal gels aligned with desired properties to facilitate surgical placement in non-load-bearing tissue-filling applications such as calvarial defects.

Polyarginine molecular weight determines transfection efficiency of calcium condensed complexes.

Cell penetrating peptides (CPPs) have been extensively studied in polyelectrolyte complexes as a means to enhance the transfection efficiency of plasmid DNA (pDNA). Increasing the molecular weight of CPPs often enhances gene expression but poses a risk of increased cytotoxicity and immunogenicity compared to low molecular weight CCPs. Conversely, low molecular weight CPPs typically have low transfection efficiency due to large complex size. Complexes made using low molecular weight CPPs were found to be condensed to a small size by adding calcium. In this study, complexes of low molecular weight polyarginine and pDNA were condensed with calcium. These complexes showed high transfection efficiency and low cytotoxicity in A549 carcinomic human alveolar basal epithelial cells. The relationships between transfection efficiency and polyarginine size (5, 7, 9, or 11 amino acids), polyarginine/pDNA charge ratios, and calcium concentrations were studied. Polyarginine 7 was significantly more effective than other polyarginines under most formulation conditions, suggesting a link between cell penetration ability and transfection efficiency.

Dynamic measurements of membrane insertion potential of synthetic cell penetrating peptides.

Cell penetrating peptides (CPPs) have been established as excellent candidates for mediating drug delivery into cells. When designing synthetic CPPs for drug delivery applications, it is important to understand their ability to penetrate the cell membrane. In this paper, anionic or zwitterionic phospholipid monolayers at the air-water interface are used as model cell membranes to monitor the membrane insertion potential of synthetic CPPs. The insertion potential of CPPs having different cationic and hydrophobic amino acids were recorded using a Langmuir monolayer approach that records peptide adsorption to model membranes. Fluorescence microscopy was used to visualize alterations in phospholipid packing due to peptide insertion. All CPPs had the highest penetration potential in the presence of anionic phospholipids. In addition, two of three amphiphilic CPPs inserted into zwitterionic phospholipids, but none of the hydrophilic CPPs did. All the CPPs studied induced disruptions in phospholipid packing and domain morphology, which were most pronounced for amphiphilic CPPs. Overall, small changes to amino acids and peptide sequences resulted in dramatically different insertion potentials and membrane reorganization. Designers of synthetic CPPs for efficient intracellular drug delivery should consider small nuances in CPP electrostatic and hydrophobic properties.

Disrupting N-Glycosylation Using Type I Mannosidase Inhibitors Alters B-Cell Receptor Signaling.

Kifunensine is a known inhibitor of type I α-mannosidase enzymes and has been shown to have therapeutic potential for a variety of diseases and application in the expression of high-mannose N-glycan bearing glycoproteins; however, the compound's hydrophilic nature limits its efficacy. We previously synthesized two hydrophobic acylated derivatives of kifunensine, namely, JDW-II-004 and JDW-II-010, and found that these compounds were over 75-fold more potent than kifunensine. Here we explored the effects of these compounds on different mice and human B cells, and we demonstrate that they affected the cells in a similar fashion to kifunensine, further demonstrating their functional equivalence to kifunensine in assays utilizing primary cells. Specifically, a dose-dependent increase in the formation of high-mannose N-glycans decorated glycoproteins were observed upon treatment with kifunensine, JDW-II-004, and JDW-II-010, but greater potency was observed with the acylated derivatives. Treatment with kifunensine or the acylated derivatives also resulted in impaired B-cell receptor (BCR) signaling of the primary mouse B cells; however, primary human B cells treated with kifunensine or JDW-II-004 did not affect BCR signaling, while a modest increase in BCR signaling was observed upon treatment with JDW-010. Nevertheless, these findings demonstrate that the hydrophobic acylated derivatives of kifunensine can help overcome the mass-transfer limitations of the parent compound, and they may have applications for the treatment of ERAD-related diseases or prove to be more cost-effective alternatives for the generation and production of high-mannose N-glycan bearing glycoproteins.

Strategies to Screen Anti-AQP4 Antibodies from Yeast Surface Display Libraries.

A rapid and effective method to identify disease-specific antibodies from clinical patients is important for understanding autoimmune diseases and for the development of effective disease therapies. In neuromyelitis optica (NMO), the identification of antibodies targeting the aquaporin-4 (AQP4) membrane protein traditionally involves the labor-intensive and time-consuming process of single B-cell sorting, followed by antibody cloning, expression, purification, and analysis for anti-AQP4 activity. To accelerate patient-specific antibody discovery, we compared two unique approaches for screening anti-AQP4 antibodies from yeast antibody surface display libraries. Our first approach, cell-based biopanning, has strong advantages for its cell-based display of native membrane-bound AQP4 antigens and is inexpensive and simple to perform. Our second approach, FACS screening using solubilized AQP4 antigens, permits real-time population analysis and precision sorting for specific antibody binding parameters. We found that both cell-based biopanning and FACS screening were effective for the enrichment of AQP4-binding clones. These screening techniques will enable library-scale functional interrogation of large natively paired antibody libraries for comprehensive analysis of anti-AQP4 antibodies in clinical samples and for robust therapeutic discovery campaigns.