A systematic review on potential microbial carbohydrases: current and future perspectives.

Various studies have shown that the microbial proteins are often more stable than belongs to other sources like plant and animal origin. Hence, the interest in microbial enzymes has gained much attention due to many potential applications like bioenergy, biofuel production, biobleaching, bioconversion and so on. Additionally, recent trends revealed that the interest in isolating novel microbes from harsh environments have been the main focus of many scientists for various applications. Basically, industrially important enzymes can be categorized into mainly three groups: carbohydrases, proteases, and lipases. Among those, the enzymes especially carbohydrases involved in production of sugars. Carbohydrases include amylases, xylanases, pectinases, cellulases, chitinases, mannases, laccases, ligninases, lactase, glucanase, and glucose oxidase. Thus, here, an approach has been made to highlight five enzymes namely amylase, cellulase, laccase, pectinase, and xylanase from different sources with special emphasis on their properties, mechanism, applications, production optimization, purification, molecular approaches for its enhanced and stable production, and also biotechnological perspectives of its future development. Also, green and sustainable catalytic conversion strategies using nanoparticles of these enzymes have also been discussed. This review will provide insight into the carbohydrases importance and their usefulness that will help to the researchers working in this field.

Potential of eggshell waste derived calcium for sustainable production of biogas from cassava wastewater.

Cassava is a staple crop that plays a significant role in the food security of many countries. However, its processing produces a liquid by-product known as cassava wastewater (CW), which can have adverse environmental consequences if discarded without treatment. Despite its cyanide content, CW has a high organic content and may be profitable when used to produce biogas. In this study, the influence of calcium particles from eggshell residues was investigated on the anaerobic digestion of CW. Moreover, the performance of the bioreactor was remotely monitored. Calcium particles from milled-calcined chicken eggshells were added to the bioreactor, and biogas production was investigated for 21 days. Adding 1 g/L and 3 g/L of calcium particles increased biogas (Bio H2 + Bio CH4) production by 195% and 338%, respectively. Finally, the requirement for digestate post-treatment before use in agriculture was observed after assessing its phytotoxicity through the germination and root growth of L. sativa seeds.

Phytoremediation of Heavy Metal-Contaminated Sites: Eco-environmental Concerns, Field Studies, Sustainability Issues, and Future Prospects.

Environmental contamination due to heavy metals (HMs) is of serious ecotoxicological concern worldwide because of their increasing use at industries. Due to non-biodegradable and persistent nature, HMs cause serious soil/water pollution and severe health hazards in living beings upon exposure. HMs can be genotoxic, carcinogenic, mutagenic, and teratogenic in nature even at low concentration. They may also act as endocrine disruptors and induce developmental as well as neurological disorders, and thus, their removal from our natural environment is crucial for the rehabilitation of contaminated sites. To cope with HM pollution, phytoremediation has emerged as a low-cost and eco-sustainable solution to conventional physicochemical cleanup methods that require high capital investment and labor alter soil properties and disturb soil microflora. Phytoremediation is a green technology wherein plants and associated microbes are used to remediate HM-contaminated sites to safeguard the environment and protect public health. Hence, in view of the above, the present paper aims to examine the feasibility of phytoremediation as a sustainable remediation technology for the management of metal-contaminated sites. Therefore, this paper provides an in-depth review on both the conventional and novel phytoremediation approaches; evaluates their efficacy to remove toxic metals from our natural environment; explores current scientific progresses, field experiences, and sustainability issues; and revises world over trends in phytoremediation research for its wider recognition and public acceptance as a sustainable remediation technology for the management of contaminated sites in the twenty-first century.

Environmental threatening concern and efficient removal of pharmaceutically active compounds using metal-organic frameworks as adsorbents.

An alarming number of contaminants of emerging concern, including active residues from pharmaceuticals and personal care products (PPCPs), are increasingly being introduced in water systems and environmental matrices due to unavoidable outcomes of modern-day lifestyle. Most of the PPCPs based contaminants are not completely eliminated during the currently used water/wastewater treatment processes. Therefore, highly selective and significant removal of PPCPs from environmental matrices remains a scientific challenge. In recent years, a wide range of metal-organic frameworks (MOFs) and MOF-based nanocomposites have been designed and envisioned for environmental remediation applications. MOF-derived novel cues had shown an adsorptive capability for the extraction and removal of an array of trace constituents in environmental samples. Noteworthy features such as substantial surface area, size, dispersibility, tunable structure, and repeated use capability provide MOFs-derived platform a superiority over in-practice conventional adsorptive materials. This review provides a comprehensive evaluation of the efficient removal or mitigation of various categories of PPCPs by diverse types of MOF-derived adsorbents with suitable examples. The growing research investigations in this direction paves the way for designing more efficient porous nanomaterials that would be useful for the elimination of PPCPs, and separation perspectives.

As(III) and As(V) removal by using iron impregnated biosorbents derived from waste biomass of Citrus limmeta (peel and pulp) from the aqueous solution and ground water.

Now a day's biosorbents with magnetic properties have been applied for water and wastewater treatment process, because of its magnetic nature it can be easily separated and can be reused more than one time. In the present study, two magnetic biosorbents were synthesized from waste biomass of Citrus limetta (peel and pulp) at 500 °C temperature represented as PAC-500 and PPAC-500. These biosorbents were effectively used for the removal of As(III) and As(V) from an aqueous solution and groundwater samples. The prepared biosorbents were characterized by using Brunauer Emmett Teller (BET), Zeta potential, Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Energy Disperssive X-ray (EDS), X-ray Diffraction (XRD) and Particle Size Analyzer (PSA). Isotherms, kinetics and thermodynamics were also applied to the obtained experimental data. The regeneration study revealed that the biosorbent can be recycled up to four cycles. The adsorbent capacity of PAC-500 and PPAC-500 for the sorption of As(III) was 714.28 µg/g and 526.31 µg/g, respectively, whereas the qmax value for As(V) sorption was 2000 µg/g for both the biosorbents (PAC-500 and PPAC-500). The effect of competitive ions was also studied that shows that the presence of H2PO4- and CO32 have negative effects on the sorption of As(III) and As(V). Arsenic is very toxic and it is a more important subject for consideration, therefore it is necessary to develop a low cost material that is very efficient in removing As from ground water contaminated with As water.

Hexavalent chromium reduction potential of Cellulosimicrobium sp. isolated from common effluent treatment plant of tannery industries.

Present study deals with the isolation and characterization of a bacterium capable for the effective reduction of Cr(VI) from tannery wastewater. Based on the 16S rRNA gene sequence analysis, this bacterium was identified as Cellulosimicrobium sp. (KX710177). During the Cr(VI) reduction experiment performed at 50, 100, 200,and 300mg/L of Cr(VI) concentrations, the bacterium showed 99.33% and 96.98% reduction at 50 and 100mg/L at 24 and 96h, respectively. However, at 200 and 300mg/L concentration of Cr(VI), only 84.62% and 62.28% reduction was achieved after 96h, respectively. The SEM analysis revealed that bacterial cells exposed to Cr(VI) showed increased cell size in comparison to unexposed cells, which might be due to either the precipitation or adsorption of reduced Cr(III) on bacterial cells. Further, the Energy Dispersive X-ray (EDX) analysis showed some chromium peaks for cells exposed to Cr(VI), which might be either due to the presence of precipitated reduced Cr(III) on cells or complexation of Cr(III) with cell surface molecules. The bacterium also showed resistance and sensitivity against the tested antibiotics with a wide range of MIC values ranging from 250 to 800mg/L for different heavy metals. Thus, this multi-drug and multi-metal resistant bacterium can be used as a potential agent for the effective bioremediation of metal contaminated sites.

Degradation and decolourization potential of an ligninolytic enzyme producing Aeromonas hydrophila for crystal violet dye and its phytotoxicity evaluation.

This study deals the biodegradation of crystal violet dye by a ligninolytic enzyme producing bacterium isolated from textile wastewater that was characterized and identified as Aeromonas hydrophila based on the 16 S rRNA gene sequence analysis. The degradation of crystal violet dye was studied under different environmental and nutritional conditions, and results showed that the isolated bacterium was effective to decolourize 99% crystal violet dye at pH 7 and temperature 35 °C in presence of sucrose and yeast extract as C and N source, respectively. This bacterium also produced lignin peroxidase and laccase enzyme, which were characterized by the SDS-PAGE analysis and found to have the molecular weight of ~ 40 and ~ 60 kDa, respectively. Further, the GC-MS analysis showed that CV dye was biotransformed into phenol, 2, 6-bis (1,1-dimethylethyl), 2',6'-dihydroxyacetophenone and benzene by the isolated bacterium and the toxicity of CV dye was reduced upto a significant level as it showed 60%, 56.67% and 46.67% inhibition in seed germination. But, after the bacterial degradation/decolourization, it showed only 43.33%, 36.67% and 16.67% inhibition in seed germination after 24, 48 and 72 h, respectively. Thus, this study concluded that the isolated bacterium has high potential for the degradation/decolourization of CV dye as well to reduce its toxicity upto a significant level.

Characterization and Identification of Recalcitrant Organic Pollutants (ROPs) in Tannery Wastewater and Its Phytotoxicity Evaluation for Environmental Safety.

Tannery wastewater (TWW) is of serious environmental concern to pollution control authorities, because it contains highly toxic, recalcitrant organic and inorganic pollutants. The nature and characteristics of recalcitrant organic pollutants (ROPs) are not fully explored to date. Hence, the purpose of this study was to characterize and identify the ROPs present in the treated TWW. Gas chromatography-mass spectrometry data analysis showed the presence of a variety of ROPs in the treated TWW. Results unfolded that benzyl chloride, butyl octyl phthalate, 2,6-dihydroxybenzoic acid 3TMS, dibutyl phthalate, benzyl alcohol, benzyl butyl phthalate, 4-chloro-3-methyl phenol, phthalic acid, 2'6'-dihydroxyacetophenone, diisobutyl phthalate, 4-biphenyltrimethylsiloxane, di-(-2ethy hexyl)phthalate, 1,2-benzenedicarboxylic acid, dibenzyl phthalate, and nonylphenol were present in the treated TWW. Due to endocrine disrupting nature and aquatic toxicity, the U.S. Environmental Protection Agency classified many of these as "priority pollutants" and restricted their use in leather industries. In addition, the physicochemical analysis of the treated TWW also showed very high BOD, COD, and TDS values along with high Cr and Pb content beyond the permissible limits for industrial discharge. Furthermore, phytotoxicity assessment unfolds the inhibitory effects of TWW on the seed germination, seedling growth parameters, and α-amylase activity in Phaseolus aureus L. This indicates that the TWW discharged even after secondary treatment into the environment has very high pollution parameters and may cause a variety of serious health threats in living beings upon exposure. Overall, the results reported in this study will be helpful for the proper treatment and management of TWW to combat the environmental threats.

Photocatalytic activity of CuO/Cu(OH)2 nanostructures in the degradation of Reactive Green 19A and textile effluent, phytotoxicity studies and their biogenic properties (antibacterial and anticancer).

In this study, CuO/Cu(OH)2 (denoted as CuONs) nanostructures were synthesized relying to a cheap and rapid chemical co-precipitation method using copper sulfate and liquid ammonia as precursors. Results obtained from X-ray diffraction, and field emission scanning electron microscopy analysis revealed the crystalline nature of synthesized CuONs. Fourier transform infrared spectroscopy and energy dispersive spectroscopy studies showed interactions between copper and oxygen atoms. Synthesized CuONs showed the size in the range of 20-30 nm using high resolution transmission electron microscopy analysis. The photocatalytic degradation performance of Reactive Green 19A (RG19A) dye using CuONs was evaluated. The results showed that CuONs exhibited 98% degradation efficiency after 12 h and also complete mineralization in form of reducing chemical oxygen demand (COD) (84%) and total organic carbon (TOC) (80%). The nanocatalyst was recovered from the dye containing solution and its catalytic activity can be reused up to four times efficiently. CuONs was also able to decolorize actual textile effluent (80% in terms of the American Dye Manufacturers' Institute (ADMI) value) with significant reductions in COD (72%) and TOC (69%). Phytotoxicity studies revealed that the degradation products of RG19A and textile effluent were scarcely toxic in nature, thereby increasing the applicability of CuONs for the treatment of textile wastewater. Additionally, the CuONs showed a maximum antibacterial effect against human pathogens which also displayed synergistic antibacterial potential related to commercial antibiotics. Moreover, CuONs displayed strong antioxidant activity in terms of ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (IC50: 51 µg/mL) and DPPH (1,1-diphenyl-2-picrylhydrazyl) (IC50: 60 µg/mL) radical scavenging. The CuONs exhibited dose dependent response against tumor rat C6 cell line (IC50: 60 µg/mL) and may serve as anticancer agents.

Environmental Pollution, Toxicity Profile and Treatment Approaches for Tannery Wastewater and Its Chemical Pollutants.

Leather industries are key contributors in the economy of many developing countries, but unfortunately they are facing serious challenges from the public and governments due to the associated environmental pollution. There is a public outcry against the industry due to the discharge of potentially toxic wastewater having alkaline pH, dark brown colour, unpleasant odour, high biological and chemical oxygen demand, total dissolved solids and a mixture of organic and inorganic pollutants. Various environment protection agencies have prioritized several chemicals as hazardous and restricted their use in leather processing however; many of these chemicals are used and discharged in wastewater. Therefore, it is imperative to adequately treat/detoxify the tannery wastewater for environmental safety. This paper provides a detail review on the environmental pollution and toxicity profile of tannery wastewater and chemicals. Furthermore, the status and advances in the existing treatment approaches used for the treatment and/or detoxification of tannery wastewater at both laboratory and pilot/industrial scale have been reviewed. In addition, the emerging treatment approaches alone or in combination with biological treatment approaches have also been considered. Moreover, the limitations of existing and emerging treatment approaches have been summarized and potential areas for further investigations have been discussed. In addition, the clean technologies for waste minimization, control and management are also discussed. Finally, the international legislation scenario on discharge limits for tannery wastewater and chemicals has also been discussed country wise with discharge standards for pollution prevention due to tannery wastewater.

Toxic and genotoxic effects of hexavalent chromium in environment and its bioremediation strategies.

Chromium is one of the major inorganic environmental pollutants, which is added in the environment through various natural and anthropogenic activities and exists mainly in two forms: Cr(III) and Cr(VI). Cr(VI) is considered to be more toxic than Cr(III) due to its high solubility and mobility. It is a well-reported occupational carcinogen associated with lung, nasal, and sinus cancers. Thus, this review article provides the detailed information on the occurrence, sources of chromium contamination in the environment and their toxicological effects in human, animal, plants as well as in microorganisms, and bioremediation strategies to minimize the toxic effects.

Exposure to Crystal Violet, Its Toxic, Genotoxic and Carcinogenic Effects on Environment and Its Degradation and Detoxification for Environmental Safety.

Crystal Violet (CV), a triphenylmethane dye, has been extensively used in human and veterinary medicine as a biological stain, as a textile dye in textile processing industries and also used to provide a deep violet color to paints and printing ink. CV is also used as a mutagenic and bacteriostatic agent in medical solutions and antimicrobial agent to prevent the fungal growth in poultry feed. Inspite of its many uses, CV has been reported as a recalcitrant dye molecule that persists in environment for a long period and pose toxic effects in environment. It acts as a mitotic poison, potent carcinogen and a potent clastogene promoting tumor growth in some species of fish. Thus, CV is regarded as a biohazard substance. Although, there are several physico-chemical methods such as adsorption, coagulation and ion-pair extraction reported for the removal of CV, but these methods are insufficient for the complete removal of CV from industrial wastewaters and also produce large quantity of sludge containing secondary pollutants. However, biological methods are regarded as cost-effective and eco-friendly for the treatment of industrial wastewaters, but these methods also have certain limitations. Therefore, there is an urgent need to develop such eco-friendly and cost-effective biological treatment methods, which can effectively remove the dye from industrial wastewaters for the safety of environment, as well as human and animal health.

Genotoxicity evaluation of tannery effluent treated with newly isolated hexavalent chromium reducing Bacillus cereus.

In this study, the efficiency of free and immobilized cells of newly isolated hexavalent chromium [Cr(VI)] reducing Bacillus cereus strain Cr1 (accession no. KJ162160) was studied in the treatment of tannery effluent. The analysis of effluents revealed high chemical oxygen demand (COD-1260 mg/L), biological oxygen demand (BOD5-660 mg/L), total dissolved solids (TDS-14000 mg/L), electrical conductivity (EC-21.5 mS/cm) and total chromium (TC-2.4 mg/L). The effluents also showed genotoxic effects to Allium cepa. Treatment of tannery effluent with isolated B. cereus strain led to considerable reduction of pollutant load. The pollutant load reduction was studied with both immobilized and free cells and immobilized cells were more effective in reducing COD (65%), BOD (80%), TDS (67%), EC (65%) and TC (92%) after 48 h. GC-MS analysis of pre and post-treatment tannery effluent samples revealed reduction of organic load after treatment with free and immobilized cells. An improvement in mitotic index and reduction in chromosomal aberrations was also observed in A. cepa grown with post-treatement effluent samples compared to untreated sample. Results demonstrate that both methods of bacterial treatment (free and immobilized) were efficient in reducing the pollutant load of tannery effluent as well as in reducing genotoxic effects, however, treatment with immobilized cells was more effective.

Microbial indicators, pathogens and methods for their monitoring in water environment.

Water is critical for life, but many people do not have access to clean and safe drinking water and die because of waterborne diseases. The analysis of drinking water for the presence of indicator microorganisms is key to determining microbiological quality and public health safety. However, drinking water-related illness outbreaks are still occurring worldwide. Moreover, different indicator microorganisms are being used in different countries as a tool for the microbiological examination of drinking water. Therefore, it becomes very important to understand the potentials and limitations of indicator microorganisms before implementing the guidelines and regulations designed by various regulatory agencies. This review provides updated information on traditional and alternative indicator microorganisms with merits and demerits in view of their role in managing the waterborne health risks as well as conventional and molecular methods proposed for monitoring of indicator and pathogenic microorganisms in the water environment. Further, the World Health Organization (WHO) water safety plan is emphasized in order to develop the better approaches designed to meet the requirements of safe drinking water supply for all mankind, which is one of the major challenges of the 21st century.

Treatment of industrial wastewaters by algae-bacterial consortium with Bio-H2 production: Recent updates, challenges and future prospects.

Currently, scarcity/security of clean water and energy resources are the most serious problems worldwide. Industries use large volume of ground water and a variety of chemicals to manufacture the products and discharge large volume of wastewater into environment, which causes severe impacts on environment and public health. Fossil fuels are considered as major energy resources for electricity and transportation sectors, which release large amount of CO2 and micro/macro pollutants, leading to cause the global warming and public health hazards. Therefore, algae-bacterial consortium (A-BC) may be eco-friendly, cost-effective and sustainable alternative way to treat the industrial wastewaters (IWWs) with Bio-H2 production. A-BC has potential to reduce the global warming and eutrophication. It also protects environment and public health as it converts toxic IWWs into non or less toxic (biomass). It also reduces 94%, 90% and 50% input costs of nutrients, freshwater and energy, respectively during IWWs treatment and Bio-H2 production. Most importantly, it produce sustainable alternative (Bio-H2) to replace use of fossil fuels and fill the world's energy demand in eco-friendly manner. Thus, this review paper provides a detailed knowledge on industrial wastewaters, their pollutants and toxic effects on water/soil/plant/humans and animals. It also provides an overview on A-BC, IWWs treatment, Bio-H2 production, fermentation process and its enhancement methods. Further, various molecular and analytical techniques are also discussed to characterize the A-BC structure, interactions, metabolites and Bio-H2 yield. The significance of A-BC, recent update, challenges and future prospects are also discussed.

Bacterial degradation of synthetic and kraft lignin by axenic and mixed culture and their metabolic products.

Pulp paper mill effluent has high pollution load due to presence of lignin and its derivatives as major colouring and polluting constituents. In this study, two lignin degrading bacteria IITRL1 and IITRSU7 were isolated and identified as Citrobacter freundii (FJ581026) and Citrobacter sp. (FJ581023), respectively. In degradation study by axenic and mixed culture, mixed bacterial culture was found more effective compared to axenic culture as it decolourized 85 and 62% of synthetic and kraft lignin whereas in axenic conditions, bacterium IITRL1 and IITRSU7 decolourized 61 and 64% synthetic and 49 and 54% kraft lignin, respectively. Further, the mixed bacterial culture also showed the removal of 71, 58% TOC; 78, 53% AOX; 70, 58% COD and 74, 58% lignin from synthetic and kraft lignin, respectively. The ligninolytic enzyme was characterized as manganese peroxidase by SDS-PAGE yielding a single band of 43 KDa. The HPLC analysis of degraded samples showed reduction as well as shifting of peaks compared to control indicating the degradation as well as transformation of compounds. Further, in GC-MS analysis of synthetic and kraft lignin degraded samples, hexadecanoic acid was found as recalcitrant compounds while 2,4,6-trichloro-phenol, 2,3,4,5-tetrachloro-phenol and pentachloro-phenol were detected as new metabolites.

Wastewater generation and treatment by various eco-friendly technologies: Possible health hazards and further reuse for environmental safety.

The discharge of untreated wastewater as a result of various developmental activities such as urbanization, industrialization and changes in lifestyle poses great threats to aquatic ecosystems as well as humans. Currently, ∼380 billion m3 (380 trillion liters) of wastewater is generated globally every year. Around 70% of freshwater withdrawals are used for agricultural production throughout the world. The wastewater generated through agricultural run-off further pollutes freshwater resources. However, only 24% of the total wastewater generated from households and industries is treated before its disposal in rivers or reused in agriculture. The most problematic contaminants associated with ecological toxicity are heavy metals such as Cd, Cr, Cu, Ni, Zn, Fe, Pb, Hg, As and Mn. One of the most important issues linked with wastewater generation is the residual presence of pathogenic microorganisms which pose potential health hazards to consumers when they enter into the food chain. It is estimated that in India almost USD 600 million (48.60 billion INR) is spent per year to tackle waterborne diseases (WBD). In light of this, immediate action is needed to effectively treat wastewater and develop safer reuse prospects. Various wastewater treatment technologies have been established and they work well to provide an alternative water source to meet the growing demand. The main concern towards treating wastewater is to eliminate inorganic and organic substances and lower the nutrient concentration, total solids, and microbial pathogens to prevent freshwater pollution and health risks.

Microalgae: A green eco-friendly agents for bioremediation of tannery wastewater with simultaneous production of value-added products.

Tannery wastewater (TWW) has high BOD, COD, TS and variety of pollutants like chromium, formaldehydes, biocides, oils, chlorophenols, detergents and phthalates etc. Besides these pollutants, TWW also rich source of nutrients like nitrogen, phosphorus, carbon and sulphur etc. that can be utilized by microalgae during their growth. Direct disposal of TWW into the environment may lead severe environmental and health threats, therefore it needs to be treated adequately. Microalgae are considered as an efficient microorganisms (fast growing, adaptability and strain robustness, high surface to volume ratio, energy saving) for remediation of wastewaters with simultaneous biomass recovery and generation of value-added products (VAPs) such as biofuels, biohydrogen, biopolymer, biofertilizer, pigments, bioethanol, bioactive compounds, nutraceutical etc. Most microalgae are photosynthetic and use CO2 and light energy to synthesise carbohydrate and reduces the emission of greenhouse gasses. Microalgae are also reported to remove heavy metals and antibiotics from wastewaters by bioaccumulation, biodegradation and biosorption. Microalgal treatment can be an alternative of conventional processes with generation of VAPs. The use of biotechnology in wastewater remediation with simultaneous generation of VAPs is trending. The validation of economic viability and environmental sustainability, life cycle assessment studies and techno-economic analysis is undergoing. Thus, in this review, the characteristics of TWW and microalgae are summarized, which manifest microalgae as potential candidates for wastewater remediation with simultaneous production of VAPs. Further, the treatment mechanisms, various factors (physical, chemical, mechanical and biological etc.) affecting treatment efficiency as well as challenges associated with microalgal remediation are also discussed.

Development of a simple biogas analyzer module (BAM) for real-time biogas production monitoring.

ABSTRACTAnaerobic digestion (AD) relies on the cooperation of specific microbial communities, making it susceptible to process disruptions that could impact biogas production. In this regard, this study presents a technological solution based on the Arduino platform, in the form of a simple online monitoring system that can track the produced biogas profile, named as biogas analyzer module (BAM). The applicability of the BAM focused on monitoring the biogas produced from sugarcane vinasse inoculated with sewage sludge biodigestion processed in mesophilic conditions (38 oC), in a pH range of 6.5-7.5, and following a three-stage operational model: (i) an adaptation (168 h), (ii) complete mixing (168 h), and (iii) bio-stimulation with glycerol (192 h). Then, the lab-made BAM was used to trace the produced biogas profile, which registered a total biogas volume of 8,719.86 cm3 and biomethane concentration of 95.79% (vol.), removing 90.8% (vol) of carbon dioxide (CO2) and 65.2% (vol) of hydrogen sulfide (H2S). In conclusion, the results ensured good accuracy and efficiency to the device created by comparisons with established standards (chromatographic and colorimetric methods), as well as the cost reduction. The developed device would likely be six times cheaper than what is available in the market.

Microbial fuel cell: A green eco-friendly agent for tannery wastewater treatment and simultaneous bioelectricity/power generation.

This review paper emphasised on the origin of hexavalent chromium toxicity in tannery wastewater and its remediation using novel Microbial Fuel Cell (MFC) technology, including electroactive bacteria, which are known as exoelectrogens, to simultaneously treat wastewater and its action in the production of bioenergy and the mechanism of Cr6+ reduction. Also, there are various parameters like electrode, pH, mode of operation, time of operation, and type of exchange membrane used for promising results shown in enhancing MFC production and remediation of Cr6+. Destructive anthropological activities, such as leather making and electroplating industries are key sources of hexavalent chromium contamination in aquatic repositories. When Cr6+ enters the food chain and enters the human body, it has the potential to cause cancer. MFC is a green innovation that generates energy economically through the reduction of toxic Cr6+ to less toxic Cr3+. The organic substrates utilized at the anode of MFC act as electrons (e-) donors. This review also highlighted the utilization of cheap substrates to make MFCs more economically suitable and the energy production at minimum cost.