Spontaneous shape reconfigurations in multicompartmental microcylinders.

Nature's particles, such as spores, viruses or cells, are adaptive--i.e., they can rapidly alter major phenomenological attributes such as shape, size, or curvature in response to environmental changes. Prominent examples include the hydration-mediated opening of ice plant seeds, actuation of pine cones, or the ingenious snapping mechanism of predatory Venus flytraps that rely on concave-to-convex reconfigurations. In contrast, experimental realization of reconfigurable synthetic microparticles has been extremely challenging and only very few examples have been reported so far. Here, we demonstrate a generic approach towards dynamically reconfigurable microparticles that explores unique anisotropic particle architectures, rather than direct synthesis of sophisticated materials such as shape-memory polymers. Solely enabled by their architecture, multicompartmental microcylinders made of conventional polymers underwent active reconfiguration including shape-shifting, reversible switching, or three-way toggling. Once microcylinders with appropriate multicompartmental architectures were prepared by electrohydrodynamic cojetting, simple exposure to an external stimulus, such as ultrasound or an appropriate solvent, gives rise to interfacial stresses that ultimately cause reversible topographical reconfiguration. The broad versatility of the electrohydrodynamic cojetting process with respect to materials selection and processing suggests strategies for a wide range of dynamically reconfigurable adaptive materials including those with prospective applications for sensors, reprogrammable microactuators, or targeted drug delivery.

Red blood cell-mimicking synthetic biomaterial particles.

Biomaterials form the basis of current and future biomedical technologies. They are routinely used to design therapeutic carriers, such as nanoparticles, for applications in drug delivery. Current strategies for synthesizing drug delivery carriers are based either on discovery of materials or development of fabrication methods. While synthetic carriers have brought upon numerous advances in drug delivery, they fail to match the sophistication exhibited by innate biological entities. In particular, red blood cells (RBCs), the most ubiquitous cell type in the human blood, constitute highly specialized entities with unique shape, size, mechanical flexibility, and material composition, all of which are optimized for extraordinary biological performance. Inspired by this natural example, we synthesized particles that mimic the key structural and functional features of RBCs. Similar to their natural counterparts, RBC-mimicking particles described here possess the ability to carry oxygen and flow through capillaries smaller than their own diameter. Further, they can also encapsulate drugs and imaging agents. These particles provide a paradigm for the design of drug delivery and imaging carriers, because they combine the functionality of natural RBCs with the broad applicability and versatility of synthetic drug delivery particles.

Engineering, characterization and directional self-assembly of anisotropically modified nanocolloids.

Along with traditional attributes such as the size, shape, and chemical structure of polymeric micro-objects, control over material distribution, or selective compartmentalization, appears to be increasingly important for maximizing the functionality and efficacy of biomaterials. The fabrication of tri- and tetracompartmental colloids made from biodegradable poly(lactide-co-glycolide) polymers via electrohydrodynamic co-jetting is demonstrated. The presence of three compartments is confirmed via flow cytometry. Additional chemical functionality is introduced via the incorporation of acetylene-functionalized polymers into individual compartments of the particles. Direct visualization of the spatioselective distribution of acetylene groups is demonstrated by confocal Raman microscopy as well as by reaction of the acetylene groups with azide-biotin via 'click chemistry'. Biotin-streptavidin binding is then utilized for the controlled assembly and orientation of bicompartmental particles onto functionalized, micropatterned substrates prepared via chemical vapor deposition polymerization.

Compartmentalized photoreactions within compositionally anisotropic Janus microstructures.

We demonstrate spatially controlled photoreactions within bicompartmental microparticles and microfibers. Selective photoreactions are achieved by anisotropic incorporation of photocrosslinkable poly(vinyl cinnamate) in one compartment of either colloids or microfibers. Prior to photoreaction, bicompartmental particles, and fibers were prepared by EHD co-jetting of two compositionally distinct polymer solutions. Physical and chemical anisotropy was confirmed by confocal laser scanning microscopy, Fourier-transformed infrared spectroscopy, and scanning electron microscopy. The data indicate adjustment of polymer concentrations of the jetting solutions to be the determining factors for particle and fiber structures. Subsequent exposure of poly(vinyl cinnamate)-based particles and fibers to UV light at 254 nm resulted in spatially controlled crosslinking. Treatment of the crosslinked bicompartmental colloids with chloroform produced half-moon shaped objects. These hemishells exhibited a distinct porous morphology with pore sizes in the range of 70 nm. Based on this novel synthetic approach, Janus-type particles and fibers can be prepared by EHD co-jetting and can be selectively photocrosslinked without the need for masks or selective laser writing.

Towards designer microparticles: simultaneous control of anisotropy, shape, and size.

Biodegradable, compositionally anisotropic microparticles with two distinct compartments that exhibit controlled shapes and sizes are fabricated. These multifunctional particles are prepared by electrohydrodynamic co-jetting of poly(lactide-co-glycolide) polymer solutions. By varying different solution and process parameters, namely, concentration and flow rate, a variety of non-equilibrium bicompartmental shapes, such as discoid and rod-shaped microparticles are produced in high yields. Optimization of jetting parameters, combined with filtration, results in near-perfect, bicompartmental spherical particles in the size range of 3-5 microm. Simultaneous control over anisotropy, size, shape, and surface structure provides an opportunity to create truly multifunctional microparticles for a variety of biological applications, such as drug delivery, diagnostic assays, and theranostics.

Microstructured materials based on multicompartmental fibers.

We demonstrate herein the fabrication of novel multicompartmental biodegradable microstructures via electrohydrodynamic cospinning of two or more polymer solutions. Under optimized processing conditions, the interface between the solutions can be sustained continuously for long time intervals, yielding fibers with multiple chemically distinct compartments. Simultaneous control over internal fiber architecture and the spatial arrangement of individual compartments combined with precise long-range fiber alignment makes these fibers potential candidates for applications such as tissue engineering or cell culture studies.

Biocompatible Polymers: Structurally Controlled Bio-hybrid Materials Based on Unidirectional Association of Anisotropic Microparticles with Human Endothelial Cells (Adv. Mater. 48/2009).

Biocompatible anisotropic polymer particles with bipolar affinity towards human endothelial cells are a novel type of building blocks for microstructured biohybrid materials, report Joerg Lahann and co-workers on p. 4920. Functional polarity due to two biologically distinct hemispheres has been achieved by synthesis of anisotropic particles via electro-hydrodynamic co-jetting of two different polymer solutions and subsequent selective surface modification.

Structurally Controlled Bio-hybrid Materials Based on Unidirectional Association of Anisotropic Microparticles with Human Endothelial Cells.

Biocompatible anisotropic polymer particles with bipolar affinity towards human endothelial cells are a novel type of building blocks for microstructured bio-hybrid materials. Functional polarity due to two biologically distinct hemispheres has been achieved by synthesis of anisotropic particles via electro-hydrodynamic co-jetting of two different polymer solutions and subsequent selective surface modification.

Micropatterned fiber scaffolds for spatially controlled cell adhesion.

Because the local microstructure plays a pivotal role for many biological functions, a wide range of methods have been developed to design precisely engineered substrates for both fundamental biological studies and biotechnological applications. However, these techniques have been by-and-large limited to flat surfaces. Herein, we use electrohydrodynamic co-spinning to prepare biodegradable three-dimensional fiber scaffolds with precisely engineered, micrometre-scale patterns, wherein each fiber is comprised of two distinguishable compartments. When bicompartmental fiber scaffolds are modified via spatially controlled peptide immobilization, highly selective cell guidance at spatial resolutions (<10 µm), so far exclusively reserved for flat substrates, is achieved. Microstructured fiber scaffolds may have utility for a range of biotechnological applications including tissue engineering or cell-based assays.

Multicompartmental microcylinders.

Colorful columns: A simple yet scalable method that yields multicompartmental microcylinders with controllable internal architectures, aspect ratios, and controlled surface modification uses electrohydrodynamic co-spinning followed by microsectioning. Compartments are discriminated by different colored dyes (see CLSM images; scale bars = 10.0 microm).

Amphiphilic colloidal surfactants based on electrohydrodynamic co-jetting.

A novel synthetic route for the preparation of amphiphilic Janus particles based on electrohydrodynamic cojetting has been developed. In this approach, selective encapsulation of hydrophobic fluorodecyl-polyhedral oligomeric silsesquioxane (F-POSS) in one compartment and a poly(vinyl alcohol) in the second compartment results in colloidal particles with surfactant-like properties including the self-organization at oil-water and air-water interfaces. Successful localization of the respective polymers in different compartments of the same particle is confirmed by a combination of fluorescence microscopy, vibrational spectroscopy, and ζ-potential measurements. We believe that this straightforward synthetic approach may lead to a diverse class of surface-active colloids that will have significant relevance ranging from basic scientific studies to immediate applications in areas, such as pharmaceutical sciences or cosmetics.