Conservation of floral, fruit and chromosomal diversity: a review on diploid and polyploid Capsicum annuum complex in India.

Capsicum as a spice crop, has wild and cultivated forms admired globally, including Indian subcontinent with vast climatic ranges. Systematic representation of the Indian Capsicum is required to address species relationships and sustainable agriculture, in face of unpredictable climatic conditions. We have updated the catalogue of Indian 'C. annuum complex' with 28 landraces and populations from different agro-climatic regions. The agro-climatic influence on the origin of stable chili landraces in India is remarkable, especially in the North East. The floral and fruit morphotype standards and chromosomal attributes have been considered for four distinct 'C. annuum complex' members under three species. The highlights of study are: (1) comparative profiling of Indian Capsicum species revealing less infraspecific variation within C. frutescens and C. chinense than C. annuum, at par with cultivation status, (2) karyotype analysis of some unique diploid landraces of C. annuum, (3) karyotypic confirmation of the polyploid Dalle Khursani landraces exclusive to India. To obtain more information, we attempted to correlate diversity of fruit and floral morphotype with chromosomal diversity. Existence of elite and rare germplasm found in the regional pockets offer great scope for enriching the agricultural tradition. The present dataset may serve as a template to be continuously upgraded by taxonomists, genomicists and breeders.

Allium cytogenetics: a critical review on the Indian taxa.

The genus Allium Linnaeus, 1753 (tribe Allieae) contains about 800 species worldwide of which almost 38 species are reported in India, including the globally important crops (onion, garlic, leek, shallot) and many wild species. A satisfactory chromosomal catalogue of Allium species is missing which has been considered in the review for the species occurring in India. The most prominent base number is x=8, with few records of x=7, 10, 11. The genome size has sufficient clues for divergence, ranging from 7.8 pg/1C to 30.0 pg/1C in diploid and 15.16 pg/1C to 41.78 pg/1C in polyploid species. Although the karyotypes are seemingly dominated by metacentrics, substantial variation in nucleolus organizing regions (NORs) is noteworthy. The chromosomal rearrangement between A.cepa Linnaeus, 1753 and its allied species has paved way to appreciate genomic evolution within Allium. The presence of a unique telomere sequence and its conservation in Allium sets this genus apart from all other Amaryllids and supports monophyletic origin. Any cytogenetic investigation regarding NOR variability, telomere sequence and genome size in the Indian species becomes the most promising field to decipher chromosome evolution against the background of species diversity and evolution, especially in the Indian subcontinent.

A critical review on cytogenetics of Cucurbitaceae with updates on Indian taxa.

The cytogenetic relationships in the species of Cucurbitaceae are becoming immensely important to answer questions pertaining to genome evolution. Here, a simplified and updated data resource on cytogenetics of Cucurbitaceae is presented on the basis of foundational parameters (basic, zygotic and gametic chromosome numbers, ploidy, genome size, karyotype) and molecular cytogenetics. We have revised and collated our own findings on seven agriculturally important Indian cucurbit species in a comparative account with the globally published reports. Chromosome count (of around 19% species) shows nearly three-fold differences while genome size (of nearly 5% species) shows 5.84-fold differences across the species. There is no significant correlation between chromosome numbers and nuclear genome sizes. The possible trend of evolution is discussed here based on molecular cytogenetics data, especially the types and distribution of nucleolus organizer regions (NORs). The review supersedes the scopes of general chromosome databases and invites scopes for continuous updates. The offline resource serves as an exclusive toolkit for research and breeding communities across the globe and also opens scope for future establishment of web-database on Cucurbitaceae cytogenetics.

A phylogenetic analysis of Momordica (Cucurbitaceae) in India based on karyo-morphology, nuclear DNA content and rDNA ITS1-5.8S-ITS2 sequences.

The infrageneric delimitation of Momordica, a medicinally important genus of Cucurbitaceae, is ill-defined until date. Momordica chromosomes are extremely small and are difficult to stain and visualize because of the dense cytoplasmic background. We have conducted karyomorphometric analysis by EMA method in five Indian Momordica species, and the nuclear genome sizes were estimated by flow cytometry for the first time. The somatic chromosome numbers ranged from 2n = 18 to 56 in the species. We have resolved previously disputed chromosome numbers in M. cymbalaria and M. dioica as 2n = 18 (lowest) and 2n = 56, respectively. Chromosome counts in the other species were re-confirmed as 2n = 22 in M. charantia, 2n = 28 in M. cochinchinensis and 2n = 56 in M. subangulata. The largest genome size was recorded in M. cymbalaria (3.74 pg 2C-1), while the smallest size (0.72 pg 2C-1) was detected in M. charantia var. charantia. The nuclear genome sizes were analysed in comparison to chromosome numbers and total chromosome lengths of the species. Karyomorphometric indices showed comparable symmetric karyotypes in the species except in M. cymbalaria having tendency towards asymmetry. The UPGMA phenogram and principle component analysis based on nuclear DNA contents and karyomorphometric parameters demonstrated interspecies differences, intraspecific distinction within M. charantia varieties and highlighted distinction of M. cymbalaria. This study was further supported by the rDNA ITS sequence-based phylogenetic analysis which revealed the monophyletic origin of the Indian members of Momordica and clarified the intraspecies relationship among the studied members. As a whole, the study brought out new insights on species diversification within the genus Momordica in India and would benefit further studies on biosystematics and plant breeding programmes.

Chromosomal localization of 45S rDNA, sex-specific C values, and heterochromatin distribution in Coccinia grandis (L.) Voigt.

Coccinia grandis is a widely distributed dioecious cucurbit in India, with heteromorphic sex chromosomes and X-Y sex determination mode. The present study aids in the cytogenetic characterization of four native populations of this plant employing distribution patterns of 45S rDNA on chromosomes and guanine-cytosine (GC)-rich heterochromatin in the genome coupled with flow cytometric determination of genome sizes. Existence of four nucleolar chromosomes could be confirmed by the presence of four telomeric 45S rDNA signals in both male and female plants. All four 45S rDNA sites are rich in heterochromatin evident from the co-localization of telomeric chromomycin A (CMA)(+ve) signals. The size of 45S rDNA signal was found to differ between the homologues of one nucleolar chromosome pair. The distribution of heterochromatin is found to differ among the male and female populations. The average GC-rich heterochromatin content of male and female populations is 23.27 and 29.86 %, respectively. Moreover, the male plants have a genome size of 0.92 pg/2C while the female plants have a size of 0.73 pg/2C, reflecting a huge genomic divergence between the genders. The great variation in genome size is owing to the presence of Y chromosome in the male populations, playing a multifaceted role in sexual divergence in C. grandis.

Dynamics of sex expression and chromosome diversity in Cucurbitaceae: a story in the making.

The family Cucurbitaceae showcases a wide range of sexual phenotypes being variedly regulated by biological and environmental factors. In the present context, we have tried to assemble reports of cytogenetic investigations carried out in cucurbits accompanied by information on sex expression diversities and chromosomal or molecular basis of sex determination in dioecious (or other sexual types, if reported) taxa known so far. Most of the Cucurbitaceae tribes have mixed sexual phenotypes with varying range of chromosome numbers and hence, ancestral conditions become difficult to probe. Occurrence of polyploidy is rare in the family and has no influence on sexual traits. The sex determination mechanisms have been elucidated in some well-studied taxa like Bryonia,Coccinia and Cucumis showing interplay of genic, biochemical, developmental and sometimes chromosomal determinants. Substantial knowledge about genic and molecular sex differentiation has been obtained for genera like Momordica, Cucurbita and Trichosanthes. The detailed information on sex determination schemes, genomic sequences and molecular phylogenetic relationships facilitate further comprehensive investigations in the tribe Bryonieae. The discovery of organ identity genes and sex-specific sequences regulating sexual behaviour in Coccinia,Cucumis and Cucurbita opens up opportunities of relevant investigations to answer yet unaddressed questions pertaining to floral unisexuality, dioecy and chromosome evolution in the family. The present discussion brings the genera in light, previously recognized under subfamily Nhandiroboideae, where the study of chromosome cytology and sex determination mechanisms can simplify our understanding of sex expression pathways and its phylogenetic impacts.

Effect of methyl cellulose on gelation behavior and drug release from poloxamer based ophthalmic formulations.

The effect of weight average molecular weight (Mw) of methyl cellulose (MC) on the gelation behavior of Poloxamer 407 (PM) and in vitro release of Ketorolac Tromethamine (KT) from different ophthalmic formulations based on PM is examined. A drop of gelation temperature of PM is observed using MC of various M(w) by test tube tilting method, UV-vis spectroscopy, viscometry and rheometry. It is also observed that the viscosity and gel strength of all the formulations are increased with the increase in Mw of MC. PM with highest Mw of MC provides best drug release property among all the formulations. It is evident from this investigation that there is a distinct effect of M(w) of MC on the gelation behavior of PM as well as on the drug release profile of KT from PM-MC based ophthalmic formulations.

Dextrin-mediated synthesis of Ag NPs for colorimetric assays of Cu(2+) ion and Au NPs for catalytic activity.

A facile one-pot approach for rapid synthesis of silver and gold nanoparticles (Ag NPs and Au NPs) with narrow size distribution and good stability was described by reducing silver nitrate and chloroauric acid with polysaccharide dextrin. Here, dextrin was used as both a reducing and stabilizing agent for synthesis of NPs. The as-synthesized Ag NPs and Au NPs were characterized by UV-visible absorption spectroscopy, transmission electron microscopy (TEM) and X-ray diffraction (XRD). The Ag NPs and Au NPs exhibited an absorption maxima at 404 and 547 nm respectively. TEM images showed NPs in the range of 8-28 nm. The crystallinity of the NPs was measured by XRD analysis. Furthermore, the as-prepared Ag NPs revealed colorimetric sensor property for detection of Cu(2+) ions based on changes in absorbance resulting from metal ion-induced aggregation of NPs or direct deposition of metal ions onto NPs. The as-prepared Au NPs exhibited a notable catalytic activity toward the reduction of 4-nitrophenol to 4-aminophenol in the presence of NaBH4.

Investigation on sodium benzoate release from poly(butylene adipate-co-terephthalate)/organoclay/sodium benzoate based nanocomposite film and their antimicrobial activity.

Polymeric nanocomposites embedded with nontoxic antimicrobial agents have recently gained potential industrial significance, mainly for their applicability to preserve food quality and ensure safety. In this study, a poly(butylene adipate-co-terephthalate) (PBAT)/organoclay (CMMT) based nanocomposite film doped with sodium benzoate (SB) as antimicrobial agent was prepared by a solution mixing process. A homogenous dispersion of organoclay (cetyltrimethylammonium-modified montmorillonite [CMMT]) in PBAT matrix was observed by X-ray diffraction and transmission electron microscopy. PBAT/CMMT nanocomposite film showed higher barrier properties against water and methanol vapor compared to the PBAT film. The release of SB from PBAT and its nanocomposite film was measured and the relevant data were fitted to the Weibull model. The higher values of Weibull's shape factor and scale parameter as corroborated by experimental findings indicated faster rate of SB release from PBAT/CMMT/SB nanocomposite film, when compared to the pristine PBAT film. Bacterial inhibition studies were accomplished against 2 food pathogenic bacteria, Bacillus subtilis and Staphylococcus aureus, by determining the zone of inhibition and corresponding growth profiles. Both bacterial inhibition studies and growth profiles established that PBAT/CMMT/SB demonstrated better antimicrobial activity than PBAT/SB film. Therefore, PBAT/CMMT/SB nanocomposite film can be used for food packaging application as it showed good barrier properties and antimicrobial activity against food pathogenic bacteria.

Antibacterial activity of Ag-Au alloy NPs and chemical sensor property of Au NPs synthesized by dextran.

Gold and silver-gold alloy nanoparticles with mean diameter of 10nm and narrow size distribution were prepared by reduction of the correspondent metal precursors using aqueous dextran solution which acts as both a reducing and capping agent. The formation of nanoparticles was characterized by UV-vis spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD) and dynamic light scattering (DLS). The silver and gold nanoparticles exhibited absorption maxima at 425 and 551 nm respectively; while for the bimetallic Ag-Au alloy appeared 520 nm in between them. TEM images showed monodispersed particles in the range of 8-10nm. The crystallinity of the nanoparticles was assured by XRD analysis. DLS data gave particle size distribution. The dextran stabilized Au nanoparticles used as a colorimetric sensor for detection and estimation of pesticide present in water. The dextran stabilized Ag-Au alloy nanoparticles exhibited interesting antimicrobial activity against bacteria at micromolar concentrations.

Effect of PEG-salt mixture on the gelation temperature and morphology of MC gel for sustained delivery of drug.

Gelation temperature of MC was reduced from 59°C to 54°C with the addition of 10% PEG. Sodium tartrate (NaT) and sodium citrate (NaC) were added to the MC-PEG solution to further reduce the gelation temperature close to physiological temperature. Different techniques were used to measure the gelation temperature of all formulations. It was observed that NaC was more effective in reducing the gelation temperature of MC-PEG combination than NaT. Environmental scanning electron microscopy (ESEM) images of hydrogels containing NaC and NaT showed that NaC containing hydrogel having an interconnected microporous structure instead of the hollow rod like structure as in the case of NaT containing hydrogel. In vitro drug release studies showed that drug release time increased from 6 to 9h by only changing the type of salt from NaT to NaC in MC-PEG combination.

Effect of clay concentration on morphology and properties of hydroxypropylmethylcellulose films.

Hydroxypropylmethylcellulose (HPMC)/montmorillonite (MMT) nanocomposite films are prepared by solution intercalation method. Mechanical, thermal, moisture absorption, optical clarity and water vapor permeability of HPMC/MMT nanocomposite films are measured. X-ray diffraction (XRD) and transmission electron microscopic (TEM) results establish formation of partially intercalated and partially exfoliated HPMC/MMT nanocomposite films. In presence of MMT, the tensile strength, tensile modulus and elongation at break of HPMC films are improved. The thermal stability of HPMC/MMT nanocomposites is better than pure HPMC. The moisture absorption of HPMC film measured in 75% of constant relative humidity is reduced with loading of MMT. Optical clarity of HPMC film is almost unaffected in presence of MMT. Water vapor permeability of HPMC decreases in presence of nanoclay due to increasing tortuous path for diffusion.

Synthesis of HPMC stabilized nickel nanoparticles and investigation of their magnetic and catalytic properties.

Nickel nanoparticles synthesized from NiCl2·6H2O by hydrazine hydrate in mixed solvent of ethanol and water in the presence of hydroxypropylmethylcellulose (HPMC) as protective and stabilizing agents. The morphology and sizes of synthesized Ni nanoparticles were studied by field-emission-scanning-electron microscopy (FESEM). Structural properties of nanoparticles were examined by X-ray diffraction (XRD). The polymer stabilized Ni nanoparticles were characterized by Fourier-transform infrared (FTIR) spectroscopy. The magnetic measurement showed that the resultant Ni nanoparticles were ferromagnetic. Also, the saturation magnetization (MS), remanent magnetization (MR) and coercivity (MR) were observed to increase with decreasing temperature. The results of magnetic characterization showed that the magnetic properties of the HPMC stabilized Ni nanoparticles are quite different from those of the bared Ni nanoparticles. All the observed magnetic properties essentially reflected the very typical nanoparticle type nature. Consequently, the resulting Ni nanoparticles were found to be highly active and recyclable catalyst for Suzuki coupling reactions.

Effect of xanthan gum and guar gum on in situ gelling ophthalmic drug delivery system based on poloxamer-407.

The aim of this investigation was to develop a novel in situ gelling formulation based on poloxamer-407 (PM) for the sustained release of an ophthalmic drug. In an attempt to reduce the concentration of PM without compromising the in situ gelling capability and also to increase the drug release time, xanthan gum (XG) and guar gum (GG) were added into PM to develop different formulations. At concentrations of 18% and above, the PM was able to undergo sol-gel transition below body temperature. It was found that XG and GG at a weight ratio of 3:7 were able to convert PM solution into gel below body temperature at PM concentrations below 18%. Both the in vitro and in vivo studies indicated that the PM with an XG-GG combination had a better ability to retain the drug than PM itself. The results indicated that the developed in situ gelling formulations containing PM with XG-GG may be a better alternative than a conventional eye drop.

Synergistic effect of salt mixture on the gelation temperature and morphology of methylcellulose hydrogel.

Gelation temperature of methylcellulose (MC) can be altered by adding different additives. Pure MC showed sol-gel transition at 60°C. Sodium citrate and sodium tartrate were used alone and in combination to see the effect of individual salt and combination of salts on the gelation temperature of MC. The gelation temperature of all the binary and ternary combinations of MC and salts were measured with different methods such as test tube tilting method (TTM), UV-vis spectroscopy, viscometry, and by rheometer and also the morphology of gels were characterized with the help of environmental scanning electron microscopy (ESEM). It was observed that when 0.1 M sodium citrate (NaC) and 0.1 M sodium tartrate (NaT) were used separately, the gelation temperature of MC was reduced up to 44°C and 47°C respectively but when mixture of NaC and NaT (0.1 (M) NaC and 0.1 (M) (NaT)) were used the gelation temperature was further reduced to 36°C. It was clear from ESEM images that when NaC and NaT were used separately the formation of network was not distinguishable. But, well-connected network structure was observed when a mixture 0.1 M NaC and 0.1 M NaT was used.

Synthesis of methylcellulose-silver nanocomposite and investigation of mechanical and antimicrobial properties.

In this paper we reported preparation of methylcellulose-silver nanocomposite films by mixing of aqueous solution of methylcellulose with silver nitrate followed by casting. The silver nanoparticles were generated in methylcellulose matrix through reduction and stabilization by methylcellulose. The surface plasmon band at 412 nm indicated the formation of Ag nanoparticles. The MC-Ag nanocomposite films were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR). The X-ray diffraction analysis of synthesized MC-Ag nanocomposite films revealed that metallic silver was present in face centered cubic crystal structure. Average crystallite size of silver nanocrystal was 22.7 nm. The FTIR peaks of as-synthesized MC-Ag nanocomposite fully designated the strong interaction between Ag nanoparticles and MC matrix. Nano-sized silver modified methylcellulose showed enhanced mechanical properties i.e. the introduction of Ag leading to both strengthening and toughening of MC matrix. The methylcellulose-silver nanocomposite films offered excellent antimicrobial activity against various microorganisms.

Effect of PVA on the gel temperature of MC and release kinetics of KT from MC based ophthalmic formulations.

The effect of molecular weight of poly(vinyl alcohol) (PVA) and sodium chloride on the gelation temperature of methylcellulose (MC) was studied with the objective to develop a MC based formulation for sustained delivery of ketorolac tromethamine a model ophthalmic drug. Pure MC showed sol-gel transition at 61.2 °C. In order to reduce the gelation temperature of MC and to increase the drug release time, PVA was used. Different techniques such as test tube tilting method, UV-vis spectroscopy, viscometry and rheometry were used to measure gelation temperature of all the binary combinations of MC and PVA. It was observed that the gelation temperature of MC was reduced with the addition of 4% PVA and also the extent of reduction of the gelation temperature of MC was dependent on the molecular weight of PVA. The strong interactions between MC and PVA molecules were established using Fourier transform infrared spectroscopy. To study the in vitro drug release properties of the MC-PVA binary combinations, 6% sodium chloride was used to reduce the gelation temperature further up to physiological temperature. It was observed that the drug release time increased from 5 to 8h with the increase of molecular weight of PVA from 9×10(3) to 1.3×10(5) and this was due to the higher viscosity, better gel strength and greater interactions between the drug and PVA molecules in case of PVA (1.3×10(5)) compared to PVA (9×10(3)). In order to have an idea about the nature of interactions between the functional moieties of the drug and the polymer unit of PVA, a theoretical study was carried out.