Lightweight, Strong, and Transparent Wood Films Produced by Capillary Driven Self-Densification.

Wood delignification and densification enable the production of high strength and/or transparent wood materials with exceptional properties. However, processing needs to be more sustainable and besides the chemical delignification treatments, energy intense hot-pressing calls for alternative approaches. Here, this study shows that additional softening of delignified wood via a mild swelling process using an ionic liquid-water mixture enables the densification of tube-line wood cells into layer-by-layer sheet structures without hot-pressing. The natural capillary force induces self-densification in a simple drying process resulting in a transparent wood film. The as-prepared films with ≈150 µm thickness possess an optical transmittance ≈70%, while maintaining optical haze >95%. Due to the densely packed sheet structure with a large interfacial area, the reassembled wood film is fivefold stronger and stiffer than the delignified wood in fiber direction. Owing to a low density, the specific tensile strength and elastic modulus are as high as 282 MPa cm3 g-1 and 31 GPa cm3 g-1. A facile and highly energy efficient wood nanotechnology approach are demonstrated toward more sustainable materials and processes by directly converting delignified wood into transparent wood omitting polymeric matrix infiltration or mechanical pressing.

Insights into Enhanced Peroxydisulfate Activation with B and Fe Co-Doped Biochar from Bark for the Rapid Degradation of Guaiacol.

A boron and iron co-doped biochar (B-Fe/biochar) from Masson pine bark was fabricated and used to activate peroxydisulfate (PDS) for the degradation of guaiacol (GL). The roles of the dopants and the contribution of the radical and non-radical oxidations were investigated. The results showed that the doping of boron and iron significantly improved the catalytic activity of the biochar catalyst with a GL removal efficiency of 98.30% within 30 min. The degradation of the GL mainly occurred through the generation of hydroxyl radicals (·OHs) and electron transfer on the biochar surface, and a non-radical degradation pathway dominated by direct electron transfer was proposed. Recycling the B-Fe/biochar showed low metal leaching from the catalyst and satisfactory long-term stability and reusability, providing potential insights into the use of metal and non-metal co-doped biochar catalysts for PDS activation.

Starch-Based Composite Films with Enhanced Hydrophobicity, Thermal Stability, and UV-Shielding Efficacy Induced by Lignin Nanoparticles.

Thehighly efficient utilization of lignin is of great importance for the development of the biorefinery industry. Herein, a novel "core-shell" lignin nanoparticle (LNP) with a diameter of around 135 nm was prepared, after the lignin was isolated from the effluent of formic acid fractionation via dialysis. In an attempt to endow composite materials with vital functionalities, the LNP was added to the starch film and the starch/polyvinyl alcohol (PVA) or starch/polyethylene oxide (PEO) composite film. The results showed that the hydrophobicity performance of the synthesized films was enhanced significantly. Specifically, the dynamic water contact angle value of the starch/PVA composite film with 1% (wt) addition of LNPs could be maintained as high as 122° for 180 s; the starch/PEO composite film also achieved an excellent water contact angle above 120°. The addition of LNPs promoted the formation of some rough structures on the film surface, as shown by the scanning electron microscopy images, which could repel the water molecules efficiently and are closely related to the enhanced hydrophobicity of the starch film. What is more, the as-prepared LNP conferred strengthened thermal stability and ultraviolet blocking properties on the starch composite film. The structural combination of the polymer film with LNPs holds the promise for providing advanced functionalities to the composite material with wide applications.

Biodegradable, Flexible and Ultraviolet Blocking Nanocellulose Composite Film Incorporated with Lignin Nanoparticles.

The exploration of functional films using sustainable cellulose-based materials to replace plastics has been of much interest. In this work, two kinds of lignin nanoparticles (LNPs) were mixed with cellulose nanofibrils (CNFs) for the fabrication of composite films with biodegradable, flexible and ultraviolet blocking performances. LNPs isolated from p-toluenesulfonic acid hydrolysis was easily recondensed and deposited on the surface of composite film, resulting in a more uneven surface; however, the composite film consisting of CNFs and LNPs isolated from maleic acid hydrolysis exhibited a homogeneous surface. Compared to pure CNF film, the composite CNF/LNP films exhibited higher physical properties (tensile strength of 164 MPa and Young's modulus of 8.0 GPa), a higher maximal weight loss temperature of 310 °C, and a perfect UVB blocking performance of 95.2%. Meanwhile, the composite film had a lower environmental impact as it could be rapidly biodegraded in soil and manmade seawater. Overall, our results open new avenues for the utilization of lignin nanoparticles in biopolymer composites to produce functional and biodegradable film as a promising alternative to petrochemical plastics.

Valorization of Rice Straw via Hydrotropic Lignin Extraction and Its Characterization.

Rice straw hydrotropic lignin was extracted from p-Toluene sulfonic acid (p-TsOH) fractionation with a different combined delignification factor (CDF). Hydrotropic lignin characterization was systematically investigated, and alkaline lignin was also studied for the contrast. Results showed that the hydrotropic rice straw lignin particle was in nanometer scopes. Compared with alkaline lignin, the hydrotropic lignin had greater molecular weight. NMR analysis showed that ß-aryl ether linkage was well preserved at low severities, and the unsaturation in the side chain of hydrotropic lignin was high. H units and G units were preferentially degraded and subsequently condensed at high severity. High severity also resulted in the cleavage of part ß-aryl ether linkage. 31P-NMR showed the decrease in aliphatic hydroxyl groups and the increasing carboxyl group content at high severity. The maximum weight loss temperature of the hydrotropic lignin was in the range of 330-350 °C, higher than the alkaline lignin, and the glass conversion temperature (Tg) of the hydrotropic lignin was in the range of 107-125 °C, lower than that of the alkaline lignin. The hydrotropic lignin has high ß-aryl ether linkage content, high activity, nanoscale particle size, and low Tg, which is beneficial for its further valorization.

Resource utilization and ionization modification of waste starch from the recycling process of old corrugated cardboard paper.

Generally, the mechanical strength and stiffness of old corrugated cardboard (OCC) waste paper are decreased after multiple recycling procedures. Surface sizing starch, which is extensively used in the surface sizing of paper making, accumulates after dissolving from the fibers and is transformed into pollutant during the OCC re-pulping process. To overcome the pollution and reutilization problem of the waste starch during the recycling process of OCC paper, waste starch was ionized using hydrogen peroxide (H2O2) to improve the mechanical properties of OCC paper during the reutilization. The results showed that the carboxyl group of waste starch increased with an increasing degree of ionization, resulting in enhanced copper ion adsorption capacity. Furthermore, the retention rate of the modified starch in the wet-end increased from 18.0% to 48.2%. The OCC paper presented the highest burst index and tensile strength of 8.94 kPa m2/g and 112.5 N m/g, respectively, when MS-2 was added. This work has great significance for implementation of the cleaning production of OCC waste papers and the reutilization of the waste starch.

The Effect of Fibrillation, Semi-Dry Pressing, and Surface Treatment on the Barrier Properties of Water Molecules and Oxygen on Food Packaging Paper.

The characteristics of fiber morphology and paper structure are critical to the barrier properties of food packaging paper. Herein, this study aimed to use pulp fibrillation, paper semi-dry pressing and carboxymethyl starch (CMS) coating to flatten the fibers, which were formed on the paper surface with good barrier properties due to the tight bond between fibers. The results showed that the permeability of paper was reduced by 87.56%, from 81.44 µm/Pa·s to 10.13 µm/Pa·s after the pulp fibrillation treatment (60 °SR). Moreover, semi-dry pressing treatment contributed to decreasing the water vapor transmission coefficient (WVP) by 50.98% to 2.74 × 10-10 g/m·s·Pa, and the oxygen permeation coefficient (OP) decreased by 98.04% to 1.93 × 10-14 cm3·cm/cm2·s·Pa. After coating the paper surface with titanium dioxide (TiO2) and CMS, the WVP of the paper was further reduced to 1.55 × 10-10 g/m·s·Pa, and OP was reduced to 0.19 × 10-14 cm3·cm/cm2·s·Pa. These values were 72.27% and 99.8% lower than those of the original paper, respectively. Therefore, through pulp fibrillation, semi-dry pressing of paper, TiO2 filling, and surface coating with CMS, there is no need to use synthetic polymer surface film-forming agents to achieve the high barrier properties that are required for low water and oxygen molecules permeation in food packaging paper.

Dual regulation of thermal conductivity and mechanical performance of nano cellulose-based composite via mimicking plant cell wall structure.

Combining thermal conductive fillers and flexible polymers is an agile approach to fabricating composites with heat-conducting performance. However, the thermal conductivity of the composites is hard to reach an equal level to the functional fillers. The mainspring is that the thermally conductive pathways within the composite could not be well-constructed due to the air-induced interface thermal resistance. Herein, inspired by the plant cell wall structure, polyvinyl alcohol (PVA) with abundant hydroxyl groups was adopted as a binder for boosting the thermally conductive pathways construction between cellulose nanofiber (CNF) and alkalized hexagonal boron nitride (BN-OH), also for strengthening the mechanical performance of the composite. The results showed that the tensile strength and through-plane thermal conductivity of the composite were high up to 91.0 MPa and 2.2 W m-1 K-1 at 40 wt% PVA content, exhibiting 121 % and 450 % enhancements compared to pure CNF film (41.2 MPa and 0.4 W m-1 K-1). Moreover, the composite also presented high thermal stability (decomposition temperature of onset was 218 °C) and good hydrophobicity properties. Overall, this study innovatively proposes an idea for enhancing the thermal conductivity and improving the mechanical properties of the composite, which is indispensable for developing thermal management materials for next-generation electronics.

Effect of Aminating Lignin Loading with Arbuscular Mycorrhizal Fungi on Soil Aggregate Structure Improvement.

Lignin is an important component of plant fiber raw materials, and is a three-dimensional network structure aromatic polymer with abundant resources and a complex structure in nature. Lignin is generally used as industrial waste, and its potential value has not been fully utilized. Modern agriculture extensively uses chemical fertilizers, leading to the gradual degradation of soil fertility and structure, which seriously affects crop growth, nutrient transport, and root respiration function. Based on soil bulk density, porosity, aggregates, and their stability indicators, this study analyzed the effects of aminated industrial lignin and its loading with arbuscular mycorrhizal fungi on soil structure improvement and plant growth. It was hoped that resource-rich lignin could play a beneficial role in improving soil structure and promoting crop growth. The phenolic hydroxyl group of lignin was epoxidized and further aminated to load with arbuscular mycorrhizal fungi. The results indicated that amine-modified lignin could effectively load with arbuscular mycorrhizal fungi. The application of arbuscular mycorrhizal fungi-supported aminated lignin to soil aggregate structure improvement greatly reduced the bulk density of soil, and increased the porosity of soil and the content of large granular soil. Compared with unmodified soil, soil bulk density decreased by 73.08%, the porosity of soil increased by 70.43%, and the content of large granular soil increased by 56.38%. Using the improved soil for corn cultivation efficiently increased the biomass of corn. The plant height was increased by 72.16%, the root-shoot ratio was increased by 156.25%, and other indexes were also improved to varying degrees. The experimental method provides an important basis for the effective utilization of lignin materials in agriculture in the future.

A triple-crosslinked, self-healing, polyvinyl alcohol/nanocellulose hydrogel for versatile sensing applications.

Flexible conductive hydrogels (FCHs) have attracted widespread interest as versatile monoliths that can be intricately integrated with various ingredients boasting multiple functionalities. The chemicophysical properties of FCHs cover a wide range, which significantly vary in their building blocks. However, achieving both favorable mechanical strength and high conductivity simultaneously through a facile approach remains a challenge. Herein, polyvinyl alcohol, dialdehyde cellulose nanofibrils, silver nanoparticles, borax, and tannic acid are readily "one-pot" incorporated into FCHs with great tensile stress (499 kPa), tensile strain (4591 %), and compressive stress (269 kPa) due to abundant hydrogen bonding, dynamic borate-diol bonding, and intermolecular acetalization. They also exhibit desired self-healing, generalized-adhesive, and antibacterial performances. Taking advantage of these, FCHs are further employed to support an epidermal sensor, on which remarkable strain sensitivity (gauge factor = 8.22), high-pressure sensitivity (≥ 0.258 kPa-1), and fast response (≤ 190 ms) are recorded. Its highly adaptive mechano-electric transformability and functions can be well maintained in serving as an array unit and touch screen pen. The results well addressed in this work are anticipated to pave the universal way of engineering FCHs.

State-of-the-art of lignin-derived carbon nanodots: Preparation, properties, and applications.

Lignin-derived carbon nanodots (LCNs) are nanometer-scale carbon spheres fabricated from naturally abundant lignin. Owing to rich and highly heritable graphene like π-π conjugated structure of lignin, to fabricate LCNs from it not only endows LCNs with on-demand tunable size and optical features, but also further broadens the green and chemical engineering of carbon nanodots. Recently, they have become increasingly popular in sensing, bioimaging, catalysis, anti-counterfeiting, energy storage/conversion, and others. Despite the enormous research efforts put into the ongoing development of lignin value-added utilization, few commercial LCNs are available. To have a deeper understanding of this issue, critical impacts on the preparation, properties, and applications of state-of-the-art LCNs are carefully reviewed and discussed. A concise analysis of their unique advantages, limitations for specific applications, and current challenges and outlook is conducted. We hope that this review will stimulate further advances in the functional material-oriented production of lignin.

Superelastic carbon aerogels with anisotropic and hierarchically-enhanced cellular structure for wearable piezoresistive sensors.

Elastic carbon aerogels have promising applications in the field of wearable sensors. Herein, a new strategy for preparing carbon aerogels with excellent compressive strength and strain, shape recovery, and fatigue resistance was proposed based on the structure design and carbonization optimization of nanocellulose-based precursor aerogels. By the combination of directional freezing and zinc ion cross-linking, bacterial cellulose (BC)/alginate (SA) composite aerogels with high elasticity and compressive strength were first achieved. The existance of zinc ions also significantly improved the carbon retention rate and inhibited structural shrinkage, thus making the carbon aerogels retain ultra-high elasticity and fatigue resistance after compression. Moreover, the carbon aerogel possessed excellent piezoresistive pressure sensing performance with a wide detection range of 0-7.8 kPa, high sensitivity of 11.04 kpa-1, low detection limit (2 % strain), fast response (112 ms), and good durability (over 1,000 cycles). Based on these excellent properties, the carbon aerogel pressure sensors were further successfully used for human motion monitoring, from joint motion to and speech recognition.

Nanocellulose-based membranes with pH- and temperature-responsive pore size for selective separation.

Smart gating membranes have drawn much attention due to the controllable pore structure. Herein, a smart gating membrane with dual responsiveness was prepared from bacteria cellulose (BC) grafted with pH- and temperature-responsive polymers. By external stimulation, the average pore size of the membrane can be controlled from 33.75 nm to 144.81 nm, and the pure water flux can be regulated from 342 to 2118 L·m-2·h-1 with remarkable variation in the pH range of 1-11 and temperature range of 20-60 °C. The adjustability of pore size is able to achieve the gradient selective separation of particles and polymers with different sizes. In addition, owing to the underwater superoleophobicity and the nanoscale pore structure, the membrane separation efficiencies of emulsified oils are higher than 99 %. Moreover, the controllable pore size endows the membrane with good self-cleaning performance. This nanocellulose-based smart gating membrane has potential applications in the fields of controllable permeation, selective separation, fluid transport, and drug/chemical controlled release systems.

Comparison of hydrophobic cellulose nanofibrils modified with different diisocyanates for circulating oil absorption.

A large number of polluting substances, including chlorinated organic substances that were highly stable and hazardous, has been emitted due to the rapidly developing chemical industry, which will affect the ecological environment. Nanocellulose aerogels are effective carriers for adsorption of oil substances and organic solvents, however, the extremely strong hydrophilicity and poor mechanical properties limited their widespread applications. In this study, TEMPO-oxidized cellulose nanofibrils was modified with 2, 4-toluene diisocyanate (TDI) and 4,4'-diphenylmethane diisocyanate (MDI) to prepare strong and hydrophobic aerogels for oil adsorption. The main purpose was to evaluate and compare the effects of two diisocyanates on various properties of modified aerogels. It was found that the modified aerogel had better hydrophobic properties, mechanical properties and adsorption properties. In particular, the modified aerogel with TDI as crosslinker showed a better performance, with a maximum chloroform adsorption capacity of 99.3 g/g, a maximum water contact angle of 131.3°, and a maximum compression stress of 36.3 kPa. This study provides further evidence of the potential of functional nanocellulose aerogel in addressing environmental pollution caused by industrial emissions.

Superelastic chitin nanofibril/chitosan aerogel for effective circulating and continuous oil-water separation.

Elastic and hydrophobic aerogels have received a lot of attention in dealing with the increasing oil pollution due to their recyclable properties. Herein, we present an ultralight and superelastic aerogel with highly oriented polygon structure based on chitin nanofibril (ChNF) and chitosan (CS) by directional freezing. The chemical cross-linking enables good mechanical strength at low aerogel density. After 500 compression-release cycles, the aerogel can retain the deformation recovery rate of 88 % in air, demonstrating the excellent resilience. The bio-based aerogel has high absorption capacity (52-114 g/g) for various oils and organic solvents, and it is able to achieve the absorption retention of 90 % even after 20 absorption-extrusion cycles. Moreover, owing to the good elasticity, the pore size of the aerogel can be adjusted by compression to selectively separate water-in-oil emulsions of different particle sizes with separation efficiencies higher than 99.5 %. The bio-based aerogel with good cycle performance has broad application prospects in the field of oil-water separation.

Lignin decolorization in organic solvents and their application in natural sunscreen.

In order to improve the utilization of industrial lignin as an effective component for ultraviolet (UV) shielding, organic solvent (methanol, ethanol, and acetone) fractionation was applied to improve its UV absorption performance and reduce its apparent color. Physicochemical properties of lignin and lignin-based sunscreens, such as molar mass fraction, functional group content, color change and UV shielding properties, were characterized in detail by GPC, UV spectroscopy, 31P NMR and HSQC-NMR spectroscopy. The results showed that the color and UV-shielding properties of the soluble fraction were significantly superior to those of the original and insoluble fractions. Different lignin fractions were acted as the only active substance in the pure cream and its UV-shielding properties were compared. Among them, the composite sunscreen by adding 5 wt% acetone fractionated lignin had highest sun protection factor (SPF) value of 6.6, approximately 4.5 times higher than those sunscreens mixed with pristine lignin. Overall, this work offers the potential of industrial lignin in value-added applications such as UV protection and cosmetics.

Freeze-casting production of thermal insulating and fire-retardant lightweight aerogels based on nanocellulose and boron nitride.

Cellulose aerogels exhibit biocompatibility and biodegradability, rendering them promising candidate for application in building energy conservation and insulation materials. However, the intrinsic inflammability of pristine cellulose aerogel causes unneglectable safety concerns, hindering their application in energy-efficient buildings. Herein, a thermal insulating, fire-retardant, strong, and lightweight aerogel was produced via freeze-casting suspensions of cellulose nanofibril (CNF) and l-glutamine functionalized boron nitride nanosheets (BNNS-g). The aerogel with a BNNS-g:CNF concentration ratio of 15:5 exhibited outstanding mechanical strength owing to the strong interaction between BNNS-g and CNF as well as satisfactory thermal insulating performance (0.052 W/m·K). Particularly, this aerogel showed excellent fire-retardant and self-extinguishing capabilities in the vertical burning test, which remained unscathed after over 60 s of burning in a butane flame. Further, the limit oxygen index (LOI) of this aerogel was 36.0 %, which was better than the LOIs of traditional petrochemical-based insulating materials. This study provides a promising strategy for producing aerogels with excellent properties using cellulose and other inorganic nano-fillers.

Phosphomolybdic acid-catalyzed oxidation of waste starch: a new strategy for handling the OCC pulping wastewater.

When old corrugated cardboard (OCC) is returned to the paper mill for repulping and reuse, the starch, which is added to the paper surface as a reinforcement agent, is dissolved into the pulping wastewater. Most of the OCC pulping wastewater is recycled to save precious water resources; however, during the water recycling process, the accumulation of dissolved starch stimulates microbial reproduction, which causes poor water quality and putrid odor. This problem seriously affects the stability of the papermaking process and product quality. In this study, phosphomolybdic acid (H3PMo12O40, abbreviated as PMo12) was utilized to catalyze the waste starch present in papermaking wastewater to monosaccharides, realizing the resource utilization of waste starch. The results showed that the optimized yield of total reducing sugar (78.68 wt%) and glycolic acid (12.83 wt%) was achieved at 145 °C with 30 wt% PMo12 at pH 2, which is equivalent to 91.51 wt% starch recovered from wastewater for resource utilization. In addition, the regeneration of the reduced PMo12 was realized by applying a potential of 1 V for 2 h. Overall, this study has theoretical significance and potential application value for resource utilization of waste starch in OCC pulping process and cleaner management of OCC waste paper.

Metal-coordination and surface adhesion-assisted molding enabled strong, water-resistant carboxymethyl cellulose films.

Developing renewable and biodegradable materials derived from cellulose is an attractive strategy to replace petroleum-derived plastics. In this study, metal ions (Cu2+, Fe3+, and Al3+) were added as a green binder into carboxymethyl cellulose (CMC) films to improve their mechanical properties and water resistance capacity. The tensile strengths of CMCAl3+ films were 133 MPa and 99 MPa at 43 % and 97 % humidity, respectively, which were comparable to or greater than those of the majority of commercially available plastics. Additionally, we proposed an interfacial adhesion-assisted molding strategy for forming cellulose-based films, avoiding film wrinkles and unevenness during drying and metal-coordination formation. The resultant films exhibited high transparency, excellent mechanical properties, water resistance capacity, ultraviolet light (UV) shielding, and antibacterial activity. In summary, the biodegradable, eco-friendly, excellent application performance, and adaptability of CMCMn+ (Mn+: polyvalent metal ions) films open new prospects as a viable alternative to non-biodegradable plastics.

Effect of temperature on simultaneous separation and extraction of hemicellulose using p-toluenesulfonic acid treatment at atmospheric pressure.

Hemicelluloses were effectively separated using p-toluenesulfonic acid (p-TsOH) treatment at high temperature. High temperature and pressure promoted hydrolysis of hemicellulose, which limited its value upon recovery. In this study, bagasse hemicellulose was separated and extracted by p-TsOH treatment at atmospheric pressure. The effects of temperature, p-TsOH concentration, and time on hemicellulose separation and extraction were investigated. The optimal conditions were 80 °C, 3.0% p-TsOH, and 120 min. The separation and extraction yield of hemicellulose was 73.23% and 36.02%, respectively. Extraction hemicellulose with 95.60% purity was obtained. In addition, the dissolution mechanism of hemicellulose was analyzed. Degradation of ß-glycosidic bonds was inhibited. Benzyl ether bond between carbohydrates and lignin was selectively cleaved. The skeleton structure of xylan in hemicellulose was protected while the functional groups of branch chain were severely damaged. It provides a valuable theoretical basis for the efficient separation and extraction of hemicellulose.