Effective medium optical modelling of indium tin oxide nanocrystal films.

Doped semiconductor nanocrystal-based thin films are widely used for many applications, such as screens, electrochromic windows, light emitting diodes, and solar cells. Herein, we have employed spectroscopic ellipsometry to measure and model the complex dielectric response of indium tin oxide films fabricated by nanocrystal deposition and sintering. The films could be modelled as Bruggemann effective media, allowing estimation of the nanoscale interstitial porosity of the structure. The effective dielectric constants show the possibility of tuning the plasma frequency and the epsilon-near zero condition of the film.

Quantitative Ultrafast Electron-Temperature Dynamics in Photo-Excited Au Nanoparticles.

The femtosecond evolution of the electronic temperature of laser-excited gold nanoparticles is measured, by means of ultrafast time-resolved photoemission spectroscopy induced by extreme-ultraviolet radiation pulses. The temperature of the electron gas is deduced by recording and fitting high-resolution photo emission spectra around the Fermi edge of gold nanoparticles providing a direct, unambiguous picture of the ultrafast electron-gas dynamics. These results will be instrumental to the refinement of existing models of femtosecond processes in laterally-confined and bulk condensed-matter systems, and for understanding more deeply the role of hot electrons in technological applications.

Morphological modulation of graphene-mediated hybridization in plasmonic systems.

We investigated the plasmonic response of a 2-dimensional ordered array of closely spaced (few-nm apart) Au nanoparticles covered by a large-area single-layer graphene sheet. The array consisted of coherently aligned nanoparticle chains, endowed with a characteristic uniaxial anisotropy. The joint effect of such a morphology and of the very small particle size and spacing led to a corresponding uniaxial wrinkling of graphene in the absence of detectable strain. The deposition of graphene redshifted the Au plasmon-resonance, strongly increased the optical absorption of the array and, most importantly, induced a marked optical anisotropy in the plasmonic response, absent in the pristine nanoparticle array. The experimental observations are accounted for by invoking a graphene-mediated resistive coupling between the Au nanoparticles, where the optical anisotropy arises from the wrinkling-induced anisotropic electron mobility in graphene at optical frequencies.

In-Operando Optical Spectroscopy of Field-Effect-Gated Al-Doped ZnO.

Transparent conductive oxides (TCO) have the unique characteristics of combining optical transparency with high electrical conductivity; such a property makes them uniquely alluring for applications in visible and infrared photonics. One of their most interesting features is the large sensitivity of their optical response to the doping level. We performed the active electrical manipulation of the dielectric properties of aluminum-doped ZnO (AZO), a TCO-based on Earth-abundant elements. We actively tuned the optical and electric performances of AZO films by means of an applied voltage in a parallel-plate capacitor configuration, with SrTiO3 as the dielectric, and monitored the effect of charge injection/depletion by means of in-operando spectroscopic ellipsometry. Calculations of the optical response of the gated system allowed us to extract the spatially resolved variations in the dielectric function of the TCO and infer the injected/depleted charge profile at the interface.

Tamm Plasmon Resonance as Optical Fingerprint of Silver/Bacteria Interaction.

The incorporation of responsive elements into photonic crystals is an effective strategy for fabricating active optical components to be used as sensors, actuators, and modulators. In particular, the combination of simple multilayered dielectric mirrors with optically responsive plasmonic materials has proven to be successful. Recently, Tamm plasmon (TP) modes have emerged as powerful tools for these purposes. These modes arise at the interface between a distributed Bragg reflector (DBR) and a plasmonic layer and can be excited at a normal incidence angle. Although the TP field is located usually at the DBR/metal interface, recent studies have demonstrated that nanoscale corrugation of the metal layer permits access to the TP mode from outside, thus opening exciting perspectives for many real-life applications. In this study, we show that the TP resonance obtained by capping a DBR with a nanostructured layer of silver is responsive to Escherichia coli. Our data indicate that the modification of the TP mode originates from the well-known capability of silver to interact with bacteria, within a process in which the release of Ag+ ions leaves an excess of negative charge in the metal lattice. Finally, we exploited this effect to devise a case study in which we optically differentiated between the presence of proliferative and nonproliferative bacteria using the TP resonance as a read-out. These findings make these devices promising all-optical probes for bacterial metabolic activity, including their response to external stressors.

Thermal Scanning-Probe Lithography for Broad-Band On-Demand Plasmonic Nanostructures on Transparent Substrates.

Thermal scanning-probe lithography (t-SPL) is a high-resolution nanolithography technique that enables the nanopatterning of thermosensitive materials by means of a heated silicon tip. It does not require alignment markers and gives the possibility to assess the morphology of the sample in a noninvasive way before, during, and after the patterning. In order to exploit t-SPL at its peak performances, the writing process requires applying an electric bias between the scanning hot tip and the sample, thereby restricting its application to conductive, optically opaque, substrates. In this work, we show a t-SPL-based method, enabling the noninvasive high-resolution nanolithography of photonic nanostructures onto optically transparent substrates across a broad-band visible and near-infrared spectral range. This was possible by intercalating an ultrathin transparent conductive oxide film between the dielectric substrate and the sacrificial patterning layer. This way, nanolithography performances comparable with those typically observed on conventional semiconductor substrates are achieved without significant changes of the optical response of the final sample. We validated this innovative nanolithography approach by engineering periodic arrays of plasmonic nanoantennas and showing the capability to tune their plasmonic response over a broad-band visible and near-infrared spectral range. The optical properties of the obtained systems make them promising candidates for the fabrication of hybrid plasmonic metasurfaces supported onto fragile low-dimensional materials, thus enabling a variety of applications in nanophotonics, sensing, and thermoplasmonics.

Local dielectric function of hBN-encapsulated WS2flakes grown by chemical vapor deposition.

Hexagonal boron nitride (hBN), sometimes referred to as white graphene, receives growing interest in the scientific community, especially when combined into van der Waals (vdW) homo- and heterostacks, in which novel and interesting phenomena may arise. hBN is also commonly used in combination with two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDCs). The realization of hBN-encapsulated TMDC homo- and heterostacks can indeed offer opportunities to investigate and compare TMDC excitonic properties in various stacking configurations. In this work, we investigate the optical response at the micrometric scale of mono- and homo-bilayer WS2grown by chemical vapor deposition and encapsulated between two single layers of hBN. Imaging spectroscopic ellipsometry is exploited to extract the local dielectric functions across one single WS2flake and detect the evolution of excitonic spectral features from monolayer to bilayer regions. Exciton energies undergo a redshift by passing from hBN-encapsulated single layer to homo-bilayer WS2, as also confirmed by photoluminescence spectra. Our results can provide a reference for the study of the dielectric properties of more complex systems where hBN is combined with other 2D vdW materials into heterostructures and are stimulating towards the investigation of the optical response of other technologically-relevant heterostacks.

Doping-Dependent Optical Response of a Hybrid Transparent Conductive Oxide/Plasmonic Medium.

Understanding the interaction between plasmonic nanoparticles and transparent conductive oxides is instrumental to the development of next-generation photovoltaic, optoelectronic, and energy-efficient solid-state lighting devices. We investigated the optical response of hybrid media composed of gold nanoparticles deposited on aluminum-doped zinc oxide thin films with varying doping concentration by spectroscopic ellipsometry. The dielectric functions of bare AZO were addressed first, revealing doping-induced effects such as the band gap shift and the appearance of free carriers. In the hybrid media, a blue-shift of the localized surface plasmon resonance of Au NPs as a function of increasing Al doping of the substrate was observed, ascribed to the occurrence of a charge transfer between the two materials and the doping-dependent variation of the polarizability of the substrate.

Local Optical Properties in CVD-Grown Monolayer WS2 Flakes.

Excitons dominate the light absorption and re-emission spectra of monolayer transition-metal dichalcogenides (TMD). Microscopic investigations of the excitonic response in TMD almost invariably extract information from the radiative recombination step, which only constitutes one part of the picture. Here, by exploiting imaging spectroscopic ellipsometry (ISE), we investigate the spatial dependence of the dielectric function of chemical vapor deposition (CVD)-grown WS2 flakes with a microscopic lateral resolution, thus providing information about the spatially varying, exciton-induced light absorption in the monolayer WS2. Comparing the ISE results with imaging photoluminescence spectroscopy data, the presence of several correlated features was observed, along with the unexpected existence of a few uncorrelated characteristics. The latter demonstrates that the exciton-induced absorption and emission features are not always proportional at the microscopic scale. Microstructural modulations across the flakes, having a different influence on the absorption and re-emission of light, are deemed responsible for the effect.

Plasmonics of Au nanoparticles in a hot thermodynamic bath.

Electromagnetically-heated metal nanoparticles can be exploited as efficient heat sources at the nanoscale. The assessment of their temperature is, however, often performed indirectly by modelling their temperature-dependent dielectric response. Direct measurements of the optical properties of metallic nanoparticles in equilibrium with a thermodynamic bath provide a calibration of their thermo-optical response, to be exploited for refining current thermoplasmonic models or whenever direct temperature assessments are practically unfeasible. We investigated the plasmonic response of supported Au nanoparticles in a thermodynamic bath from room temperature to 350 °C. A model explicitly including the temperature-dependent dielectric function of the metal and finite-size corrections to the nanoparticles' permittivity correctly reproduced experimental data for temperatures up to 75 °C. The model accuracy gradually faded for higher temperatures. Introducing a temperature-dependent correction that effectively mimics a surface-scattering-like source of damping in the permittivity of the nanoparticles restored good agreement with the data. A finite-size thermodynamic effect such as surface premelting may be invoked to explain this effect.

Electronic properties of single-layer tungsten disulfide on epitaxial graphene on silicon carbide.

This work reports an electronic and micro-structural study of an appealing system for optoelectronics: tungsten disulfide (WS2) on epitaxial graphene (EG) on SiC(0001). The WS2 is grown via chemical vapor deposition (CVD) onto the EG. Low-energy electron diffraction (LEED) measurements assign the zero-degree orientation as the preferential azimuthal alignment for WS2/EG. The valence-band (VB) structure emerging from this alignment is investigated by means of photoelectron spectroscopy measurements, with both high space and energy resolution. We find that the spin-orbit splitting of monolayer WS2 on graphene is of 462 meV, larger than what is reported to date for other substrates. We determine the value of the work function for the WS2/EG to be 4.5 ± 0.1 eV. A large shift of the WS2 VB maximum is observed as well, due to the lowering of the WS2 work function caused by the donor-like interfacial states of EG. Density functional theory (DFT) calculations carried out on a coincidence supercell confirm the experimental band structure to an excellent degree. X-ray photoemission electron microscopy (XPEEM) measurements performed on single WS2 crystals confirm the van der Waals nature of the interface coupling between the two layers. In virtue of its band alignment and large spin-orbit splitting, this system gains strong appeal for optical spin-injection experiments and opto-spintronic applications in general.

Plasmonic Color-Graded Nanosystems with Achromatic Subwavelength Architectures for Light Filtering and Advanced SERS Detection.

Plasmonic color-graded systems are devices featuring a spatially variable plasmonic response over their surface. They are widely used as nanoscale color filters; their typical size is small enough to allow integration with miniaturized electronic circuits, paving the way to realize novel nanophotonic devices. Currently, most plasmonic color-graded systems are intrinsically discrete because their chromatic response exploits the tailored plasmon resonance of microarchitectures characterized by different size or geometry for each target color. Here, we report the realization of multifunctional plasmon-graded devices where continuously graded chromatic response is achieved by smoothly tuning the composition of the resonator material while simultaneously maintaining an achromatic nanoscale geometry. The result is a new class of versatile materials: we show their application as plasmonic filters with a potential pixel size smaller than half of the exciting wavelength but also as multiplexed surface-enhanced Raman spectroscopy (SERS) substrates. Many more implementations, such as photovoltaic efficiency boosters or color routers, await and will benefit from the low fabrication cost and intrinsic plasmonic flexibility of the presented systems.

Pushing the high-energy limit of plasmonics.

The localized surface plasmon resonance of metal nanoparticles allows confining the eletromagnetic field in nanosized volumes, creating high-field "hot spots", most useful for enhanced nonlinear optical spectroscopies. The commonly employed metals, Au and Ag, yield plasmon resonances only spanning the visible/near-infrared range. Stretching upward, the useful energy range of plasmonics requires exploiting different materials. Deep-ultraviolet plasmon resonances happen to be achievable with one of the cheapest and most abundant materials available: aluminum indeed holds the promise of a broadly tunable plasmonic response, theoretically extending far into the deep-ultraviolet. Complex nanofabrication and the unavoidable Al oxidation have so far prevented the achievement of this ultimate high-energy response. A nanofabrication technique producing purely metallic Al nanoparticles has at last allowed to overcome these limits, pushing the plasmon resonance to 6.8 eV photon energy (≈180 nm) and thus significantly broadening the spectral range of plasmonics' numerous applications.

Deep ultraviolet plasmon resonance in aluminum nanoparticle arrays.

Small aluminum nanoparticles have the potential to exhibit localized surface plasmon resonances in the deep ultraviolet region of the electromagnetic spectrum, however technical and scientific challenges make it difficult to attain this limit. We report the fabrication of arrays of Al/Al2O3 core/shell nanoparticles with a metallic-core diameter between 12 and 25 nm that display sharp plasmonic resonances at very high energies, up to 5.8 eV (down to λ = 215 nm). The arrays were fabricated by means of a straightforward self-organization approach. The experimental spectra were compared with theoretical calculations that allow the correlation of each feature to the corresponding plasmon modes.

Optical properties of Yeast Cytochrome c monolayer on gold: an in situ spectroscopic ellipsometry investigation.

The adsorption of Yeast Cytochrome c (YCC) on well defined, flat gold substrates has been studied by Spectroscopic Ellipsometry (SE) in the 245-1000 nm wavelength range. The investigation has been performed in aqueous ambient at room temperature, focusing on monolayer-thick films. In situ Î´Ψ and Î´Δ difference spectra have shown reproducibly well-defined features related to molecular optical absorptions typical of the so-called heme group. The data have been reproduced quantitatively by a simple isotropic optical model, accounting for the molecular absorption spectrum and film-substrate interface effects. The simulations allowed a reliable estimate of the film thickness and the determination of the position and the shape of the so-called Soret absorption peak that, within the experimental uncertainty, is the same found for molecules in liquid. These findings suggest that YCC preserves its native structure upon adsorption. The same optical model was able to reproduce also ex situ results on rinsed and dried samples, dominated by the spectral features associated to the polypeptide chain that tend to overwhelm the heme absorption features.

Interferometric control of spin-polarized electron populations at a metal surface observed by multiphoton photoemission.

In an interferometric pump-probe experiment, we demonstrate the phase tuning of the spin polarization of photoelectrons emitted in a three-photon process from Cu(001). A phase shift of pi between delayed ultrafast circularly polarized light pulses can switch the spin polarization from +/-20% to -/+40%. In the delay regime of overlapping pulses, we show the dominating role of optical interference effects in determining the spin polarization. For longer delays, we detect the influence of the coherent material response, manifested in both the final state electron population as well as the final state spin polarization.