Teaching rotary root canal instrumentation using a Peyton teaching approach.

INTRODUCTION: The aim of the study was two evaluate the effectiveness of a Peyton teaching approach for rotary root canal instrumentation, in comparison to the traditional "see one-do one" method. MATERIAL AND METHODS: Forty undergraduate students were randomly divided into two groups (n = 20). Students of the first group (G1) were taught how to use rotary instrumentation using a modified Peyton method, whilst the second group (G2) watched a teaching video (30 min) on the same subject. Both groups instrumented a plastic block and subsequently both mesial canals of an extracted lower molar. The quality of the root canal instrumentation was analysed by 2 blinded observers on video recordings and x-rays. RESULTS: Interobserver correlation was 0.917 (p < .0005; Pearson) for the assessment of the video recordings; students of G1 received significantly more total points (83.55 ± 6.82 points) compared to G2 (69.76 ± 13.82) (p = .001; t-test), the gender had no significant effect on the overall results (p = .444; two-way ANOVA). Significant differences were detected for the categories "initial scouting," "coronal enlargement," "glide path preparation," "preparation using X2 file," "preparation using X3 file" (p < .05; t-test) as well as for the subcategories "sequence of rinse, recapitulation, rinse" (p = .001; t-test) and "recapitulation" (p < .002; t-test). No differences between groups were observed for the radiographic evaluation with respect to working length and canal straightening. CONCLUSION: Teaching rotary instrumentation by using the Peyton approach resulted in improved performance of undergraduate students assessed with a checklist-based process analysis. Enhanced implementation of rotary instrumentation could result in better long-term results of students' root canal treatment.

Present status and future directions: The restoration of root filled teeth.

This narrative review will focus on a number of contemporary considerations relating to the restoration of root filled teeth and future directions for research. Clinicians are now more than ever, aware of the interdependence of the endodontic and restorative aspects of managing root filled teeth, and how these aspects of treatment are fundamental to obtaining the best long-term survival. To obtain the optimal outcomes for patients, clinicians carrying out endodontic treatment should have a vested interest in the restorative phase of the treatment process, as well as an appreciation for the structural and biomechanical effects of endodontic-restorative procedures on restoration and tooth longevity. Furthermore, the currently available research, largely lacks appreciation of occlusal factors in the longevity of root filled teeth, despite surrogate outcomes demonstrating the considerable influence this variable has. Controversies regarding the clinical relevance of minimally invasive endodontic and restorative concepts are largely unanswered with respect to clinical data, and it is therefore, all too easy to dismiss these ideas due to the lack of scientific evidence. However, conceptually, minimally invasive endodontic-restorative philosophies appear to be valid, and therefore, in the pursuit of improved clinical outcomes, it is important that the efficacies of these treatment protocols are determined. Alongside an increased awareness of the preservation of tooth structure, developments in adhesive bonding, ceramic materials and the inevitable integration of digital dentistry, there is also a need to evaluate the efficacy of new treatment philosophies and techniques with well-designed prospective clinical studies.

Reduction of dual-species biofilm after sonic- or ultrasonic-activated irrigation protocols: A laboratory study.

AIM: To evaluate the antibacterial effect of sonic- and ultrasonic-activated irrigation on bacterial reduction of a dual-species biofilm in root canals compared to nonactivated irrigation in a laboratory study. METHODOLOGY: Two hundred and forty extracted human single-rooted maxillary anterior teeth were divided into two main groups (G, n = 120) according to the initial preparation size of the root canal (G1: size 25, 0.06 taper, G2: size 40, 0.06 taper). Root canals were inoculated with Enterococcus faecalis and Streptococcus oralis. After 5 days, G1 received combined instrumentation (up to size 40, 0.06 taper) and irrigation/activation, whereas G2 received solely irrigation/activation protocols. In both groups, irrigation was performed with sodium hypochlorite (NaOCl 1%) or physiological saline (NaCl 0.9%), using nonactivated syringe irrigation, sonic activation (2 x 30 s) or ultrasonic activation (2 x 30 s). Logarithmic reduction factors (LRFs) of colony-forming units were analysed separately for dentine-adherent and planktonic bacteria immediately after irrigation/activation protocols (time-point 1) or after 5 days of further incubation (time-point 2) by analysis of variance (anova) and post hoc tests (Tukey's HSD, t-test). The significance level was set at 0.05. RESULTS: In G1 subgroups (combined instrumentation with irrigation/activation), LRFs were significantly affected by the applied irrigation solution (p < .0001), but not by the activation method (p > .05; anova). In G2 subgroups (solely irrigation/activation), both, irrigant solution and activation, significantly affected LRFs (p < .0001, anova). Sonic activation resulted in significantly higher LRFs than ultrasonic activation (p < .0001) which had significantly greater reductions than nonactivated irrigation (p < .05; Tukey's HSD). At T2, strong bacterial regrowth was observed in all groups; however, a significant bacterial reduction was detected for factors instrumentation, irrigant solution and activation (p < .0001; anova). Similar LRFs were found for dentine-adherent and planktonic bacterial cells in all groups (r = 0.91 at T1, r = 0.8 at T2). CONCLUSIONS: In this laboratory study on extracted maxillary anterior teeth high-frequency sonic activation resulted in a greater bacterial reduction compared to ultrasonic activation in groups receiving solely irrigation/activation protocols; however, irrigation using NaOCl and ultrasonic activation also contributed significantly to bacterial reduction compared to the control groups.

European Society of Endodontology position statement: The restoration of root filled teeth.

This position statement on the restoration of root filled teeth represents the consensus of an expert committee, convened by the European Society of Endodontology (ESE). Current clinical and scientific evidence, as well as the expertise of the committee, have been used to develop this statement. The aim is to provide clinicians with evidence-based principles for decision-making on the choice of restoration following the completion of root canal treatment. By discussing the evidence in relation to key topics regarding post-endodontic restoration, a series of clinical recommendations are made. The scientific basis of the recommendations made in this paper can be found in a recently published review article (Bhuva et al. 2021, International Endodontic Journal, https://doi.org/10.1111/iej.13438). It is the intention of the committee to update this statement as further evidence emerges.

Root canal pre-treatment and adhesive system affect bond strength durability of fiber posts ex vivo.

OBJECTIVES: To investigate the effect of different pre-treatments on the long-term bond strength of fiberglass posts luted either with dual-curing self-etch adhesives and core build-up composites or with a self-adhesive resin (SAR) cement. MATERIALS AND METHODS: In total, 180 human root-filled teeth received post-space preparations and three different dentin pre-treatments (PTs): PT1, ethanol (99%); PT2, ethanol-tertiary-butanol-water-solution (AH Plus Cleaner, Dentsply Sirona; York, USA); and PT3, distilled water (control). Five luting systems were used: FU, Futurabond U (Voco; Cuxhaven, Germany); CL, Clearfil DC Bond (Kuraray Noritake; Okayama, Japan); GR, Gradia Core SE Bond (GC Europe NV; Leuven, Belgium); LU, LuxaBond Universal (DMG; Hamburg, Germany); and RX, RelyX Unicem 2 (3M; Minnesota, USA). Roots were cut into six slices (1 mm thick). From each root canal region, three slices were submitted to immediate and three to post-storage push-out testing. The latter were subjected to thermocycling (5-55°C, 6.000 cycles) and stored for six months in saline solution (0.9%, 37°C). Data were analysed using repeated measures ANOVA and chi-square tests (MV±SD). RESULTS: Bond strength was significantly affected by material (p<0.0005), pre-treatment (p=0.016), and storage (p<0.0005; repeated-measures ANOVA). LU (18.8±8.1MPa) revealed significantly higher bond strength than RX (16.08±6.4MPa), GR (15.1±4.6MPa), CL (13.95±5.2MPa), and FU (13.7±6.3MPa). PT1 (16.5±6.9MPa) revealed significantly higher bond strength than PT3 (14.5±5.7MPa). CONCLUSIONS: A universal adhesive in self-etch mode combined with a core build-up material revealed higher bond strength than a SAR cement, both interacted positively with Ethanol pre-treatment. CLINICAL RELEVANCE STATEMENT: Ethanol (99%) rinsing can be recommended as part of post and core pre-treatment for the investigated luting systems.

Hard X-ray phase-contrast-enhanced micro-CT for quantifying interfaces within brittle dense root-filling-restored human teeth.

Bonding of resin composite fillings, for example following root-canal treatment, is a challenge because remaining gaps grow and lead to failure. Here, phase-contrast-enhanced micro-computed tomography (PCE-CT) is used to explore methods of non-destructive quantification of the problem, so that countermeasures can be devised. Five human central incisors with damaged crowns were root-filled followed by restoration with a dental post. Thereafter, the crowns were rebuilt with a resin composite that was bonded conventionally to the tooth with a dental adhesive system (Futurabond U). Each sample was imaged by PCE-CT in a synchrotron facility (ID19, European Synchrotron Radiation Facility) with a pixel size of 650 nm. The reconstructed datasets from each sample were segmented and analysed in a semi-automated manner using ImageJ. PCE-CT at sub-micrometre resolution provided images with an impressive increased contrast and detail when compared with laboratory micro-computed tomography. The interface between the dental adhesive and the tooth was often strongly disrupted by the presence of large debonded gaps (on average 34% ± 15% on all surfaces). The thickness of the gaps spanned 2 µm to 16 µm. There was a large variability in the distribution of gaps within the bonding area in each sample, with some regions around the canal exhibiting up to 100% discontinuity. Although only several micrometres thick, the extensive wide gaps may serve as gateways to biofilm leakage, leading to failure of the restorations. They can also act as stress-raising `cracks' that are likely to expand over time in response to cyclic mechanical loading as a consequence of mastication. The observations here show how PCE-CT can be used as a non-destructive quantitative tool for understanding and improving the performance of clinically used bonded dental restorations.

Guided implant surgery for one-piece ceramic implants: a digital workflow.

BACKGROUND: Accurate implant placement in the bone is key to successful implant treatment. Once inserted, it can be difficult to correct the orientation of the implant axis, especially of a one-piece implant. Prosthetic-driven digital implant planning in combination with fully guided implant surgery can offer additional safety in such cases. CASE PRESENTATION: The patient presented with a wide, edentulous interdental space extending from sites 13 to 16, which was to be restored with three one-piece zirconia implants supporting a zirconia fixed partial denture comprizing a cantilever to the mesial aspect. Digital planning based on DICOM (Digital Imaging and Communications in Medicine) and intraoral surface data was performed to ensure optimal positioning. Guided implant placement was executed using a contra-angle handpiece with special attachments and a compatible, sleeveless drill guide. Impressions of the implants for the final restoration were acquired using an intraoral scanner. Reflection-related errors were compensated for by using the given digital abutment geometry. The DICOM and STL datasets were superimposed and used as the basis for fabricating a monolithic zirconia restoration through a subtractive milling process. The final restoration was adhesively cemented. CONCLUSIONS: By using a prosthetic-driven implant planning strategy, it was possible to place the one-piece ceramic implants without an available implant manufacturer's guide-based solution. This was accomplished using a contra-angle surgical handpiece with special attachments and a compatible drill guide. This approach is particularly recommended for the placement of one-piece implants, which otherwise require irreversible abutment grinding for the adjustment of the implant axis orientation after placement. To increase the precision of the digital impressions of the implants, the ideal abutment geometry was imported and superimposed onto the scan data. The results demonstrate that the proposed method can dispense with the need for gingival retraction when acquiring impressions for implants of this type in the future.

Pharmacist-led medication reviews for geriatric residents in German long-term care facilities.

BACKGROUND: The benefit of medication reviews for long-term care (LTC) residents has been generally recognized throughout health care systems. Whereas many studies showed the impact of comprehensive medication reviews performed by specialized clinical pharmacists, little is known about the impact of medication reviews performed by community pharmacists. Involving them in the provision of medication reviews may help satisfy the increasing demand for ensuring medication safety. METHODS: Community pharmacists supplying drugs to the LTC facilities performed a medication review for German LTC residents aged at least 65 years and taking five or more drugs per day based on the patients' medication only. Documented potential drug-related problems (DRPs) and the implementation rate of pharmaceutical interventions were evaluated descriptively. To assess the quality of the medication reviews, we developed a corresponding reference system based on the analysis of two experienced clinical pharmacists. RESULTS: Twelve pharmacies performed medication reviews for 94 LTC residents. Overall, the pharmacists documented 154 potential DRPs (mean 1.6 per patient, SD 1.5) of which the most common were drug-drug interactions (40%) followed by potentially inappropriate medication (PIM) (16%) and inappropriate dosages (14%). 33% of the pharmacists' interventions to solve DRPs were successfully implemented, mostly dosage adjustments. The identification of potentially severe drug-drug interactions and PIM showed the highest agreement (88 and 73%) with the reference system. CONCLUSIONS: The medication review program of community pharmacists for LTC residents led to the identification of relevant DRPs. The reference system assessing the quality of the service can contribute to its transparency and reveals the potential for its improvement. The community pharmacists' knowledge of the LTC residents and their relation to the prescribers is crucial for providing successful medication reviews.

Failure loads of all-ceramic cantilever fixed dental prostheses on post-restored abutment teeth: influence of the post presence and post position.

The influence of a fiber post-restored abutment tooth on the load capability of a three-unit zirconia framework cantilever fixed dental prosthesis (cFDP) was evaluated after simulated clinical function. Human lower sound premolars (n = 64) were distributed, in equal numbers, to four experimental groups: two vital abutment teeth (group I; control); mesial abutment tooth post-restored (group II); distal abutment tooth post-restored (group III); and mesial and distal abutment teeth post-restored (group IV). All specimens received an adhesively luted three-unit cFDP of veneered zirconia. Simulated clinical function was performed by two subsequent sequences of thermal-cycling (2 × 3,000 cycles) and mechanical loading (1.2 × 106 load cycles from 0 to 50 N) (TCML). Four specimens failed during TCML (one in each of groups I and IV and two in group II). The maximum load capability ranged from 365 to 538 N and was not significantly different between groups. Specimens with post-restored abutments failed mainly because of abutment tooth fracture of the distal abutment. The presence or position of post-restored abutment teeth has no significant impact on load capability of all-ceramic three-unit cFDPs. The risk of tooth fracture of the distal abutment teeth of a cFDP was significantly increased when one abutment tooth, irrespective of its position, was post-and-core restored.

Direct or Indirect Restoration of Endodontically Treated Maxillary Central Incisors with Class III Defects? Composite vs Veneer or Crown Restoration.

PURPOSE: The aim of this ex-vivo study was to evaluate the load capacity of direct or indirect endodontically restored maxillary central incisors with Class III defects, with or without glass-fiber posts. MATERIALS AND METHODS: Seventy-two extracted human maxillary central incisors were endodontically treated and bi-proximal Class III cavities were prepared. Specimens were randomly allocated to six groups (n = 12): direct restoration with composite (C); direct restoration with composite and additional glass-fiber post (CP); ceramic veneer restoration (V), ceramic veneer restoration and additional glass-fiber post (VP), ceramic crown restoration (Cr), ceramic crown restoration and additional glass-fiber post (CrP). Specimens were exposed to thermomechanical loading (TML: 1.2 million cycles, 1 to 50 N; 6000 thermal cycles between 5°C and 55°C for 1 min each), and subsequently linearly loaded until failure (Fmax [N]) at an angle of 135 degrees 3 mm below the incisal edge on the palatal side. Statistical tests were performed using the Kruskall-Wallis and Mann-Whitney U-Test. RESULTS: During dynamic loading by TML, one early failure occurred in group C, CP, and CrP. Subsequent linear loading resulted in mean fracture load values [N] of C = 483 ± 219, CP = 536 ± 281, V = 908 ± 293, VP = 775 ± 333, Cr = 549 ± 258, CrP = 593 ± 259. The Kruskal-Wallis test showed significant differences of load capacity between groups (p < 0.05). Mann-Whitney U-test revealed significantly lower maximum fracture load values of group C compared to group V (p = 0.014), after Bonferroni-Holm correction. Non-restorable root fracture was the most frequent type of failure. CONCLUSION: Endodontically treated maxillary central incisors with Class III defects directly restored with composite are as loadable as indirect crown restorations. Compared to full-coverage restorations, less invasive veneers appear to be more beneficial. Additional placement of glass-fiber posts shows no positive effect.

Effect of Final Irrigation Protocol and Etching Mode on Bond Strength of a Multimode Adhesive in the Root Canal.

PURPOSE: To analyze the effects of ethanol for final post space irrigation and etching mode on the bond strength of fiber posts luted with a mild multimode adhesive (pH 2.3) as compared with a reference group using a self-adhesive resin cement (SAR). MATERIALS AND METHODS: Human anterior teeth were endodontically treated. After post space preparation, the root canals were irrigated using 1% sodium hypochlorite (NaOCl) applied with passive ultrasonic irrigation, followed by either distilled water (control) or distilled water and ethanol 99% as final post space irrigation. Fiber posts were luted using Futurabond U in self-etch mode (FU-SE), Futurabond U in etch-and-rinse mode (FU-ER), or Futurabond DC (SE) in combination with a dual-curing core buildup material (Grandio Core, all VOCO); alternatively, posts were inserted using a self-adhesive composite cement (RelyX Unicem 2, 3M ESPE). Bond strengths were evaluated using push-out tests following thermocycling (TC) and storage in 0.9% NaCl for 3 months. RESULTS: Mean push-out bond strengths (MPa) were significantly affected by the luting system (p < 0.0005) but not by the irrigation protocol (p = 0.068; ANOVA), although a significant interaction between the factors "luting agent" and "pre-treatment" was observed. FU E&R (21.28 [4.34]) and RX (20.12 [7.32]) revealed significantly higher bond strengths compared to FU SE (15.9 [6.02]), whereas F DC (18.8 [6.9]) did not differ significantly from all other groups. Ethanol pre-treatment increased bond strength in the apical part of the root canal for all materials, with the exception of FU E&R. CONCLUSION: Mild multimode adhesives exhibit comparable mean bond strengths to a SAR cement within the root canal for luting fiber posts if applied in an etch-and-rinse mode. Using this approach, ethanol application has no positive effects on bond strength.

Are self-adhesive resin cements suitable as core build-up materials? Analyses of maximum load capability, margin integrity, and physical properties.

OBJECTIVES: The aim of the present study was to test a self-adhesive resin cement used as core build-up material in comparison to two commercially available core build-up materials. MATERIALS AND METHODS: Forty human anterior teeth were endodontically treated and fiber post insertion (RelyX Fiber posts) and core build-ups were performed using two core build-up materials applied with an etch-and-rinse adhesive approach (Luxacore Dual-LC and Clearfil Core-CC) and an experimental self-adhesive resin cement (SAR) in two application modes (SAR Handmix and SAR Automix). Samples were subjected to thermo-mechanical loading. Margin integrity was determined using scanning electron microscopy (SEM), and maximum load capability (Fmax) was evaluated. Physical properties of the tested materials were also examined. RESULTS: Fmax was significantly affected by the core build-up material (p < 0.0005; one-way ANOVA). CC [481 (158) N] revealed significantly higher Fmax compared to LC [226 (80) N], SAR Hand [205 (115), and SAR Automix [197 (134) N] (p < 0.05; Tukey-B). The percentage of margin quality "continuous margin" in enamel after thermo-mechanical loading (TML) differed significantly among groups (p < 0.0005; Kruskal-Wallis); CC demonstrated a significantly higher percentage of margin quality "continuous margin" compared to the other groups. Physical properties were significantly affected by the different core materials (p < 0.0005; ANOVA); CC and LC demonstrated significantly higher flexural strength compared to both SAR groups as well as significantly higher water sorption of both SAR groups compared to CC and LC. CONCLUSION: Within the limitations of the present in vitro study, we conclude that the investigated experimental self-adhesive resin cement is not suitable as a core build-up material due to the lower maximum load capability, low margin quality, and the data of the mechanical properties. CLINICAL RELEVANCE: The investigated experimental self-adhesive resin cement cannot be recommended as a core build-up material.

Do chlorhexidine and ethanol improve bond strength and durability of adhesion of fiber posts inside the root canal?

OBJECTIVES: The aim was to investigate the effects of chlorhexidine and ethanol pretreatment of the root canal on push-out bond strengths and durability of adhesion of fiber posts luted with two different adhesive strategies. MATERIALS AND METHODS: One hundred twenty human anterior teeth were endodontically treated. After post space preparation, the root canals were irrigated using 1 % sodium hypochlorite (NaOCl) applied with passive ultrasonic irrigation followed by distilled water (control). In pretreatment (PT) group, chlorhexidine (CHX) root canals were irrigated using 2 % chlorhexidine; and in the PT group, 99 % ethanol was used prior application of the luting agent. Two different post-and-luting systems with an etch-and-rinse (CX) adhesive approach (n = 60) and a self-adhesive resin cement (RX; n = 60) were inserted into the root canals. Bond strengths were evaluated initially and after thermocycling and storage for 6 months using push-out tests. RESULTS: Bond strength was significantly affected by the adhesive strategy (p < 0.0005), the pretreatment (p < 0.0005) and the location inside the root canal (p < 0.0005; repeated measurement ANOVA). Ethanol significantly increased bond strengths irrespective of the luting agent used compared to the control and CHX group (p < 0.05; Tukey's B). CONCLUSION: Ethanol significantly increased bond strength of the CX and the RX system inside the root canal and could be recommended as a final rinse for luting fiber posts using an ethanol-based etch-and-rinse adhesive system or self-adhesive resin cement. CLINICAL RELEVANCE: PT of the root canal using ethanol seems to facilitate adhesive luting of fiber posts with the tested adhesive system and luting cements.

Effects of endodontic root canal irrigants on tooth dentin revealed by infrared spectroscopy: a systematic literature review.

BACKGROUND: Root canal irrigation endodontic solutions have effects on the chemistry of dentin. Infrared spectroscopy is a non-destructive chemical characterization method where the strength of absorption often correlates with mineral or organic composition. OBJECTIVES: To survey effects of commonly used irrigation solutions on the composition of root dentin as detected by widely-available Fourier transform infrared spectroscopy (FTIR) methods. METHODS: Electronic databases were searched for articles published between 1983 to 2023. After risk of bias assessments (OHAT), studies were grouped according to effects per irrigation solution. Inclusion criteria comprised in vitro studies that used extracted human or bovine teeth, treated by irrigation solutions characterized using FTIR spectroscopy and presenting spectral data. Publications that did not share FTIR spectra were excluded. RESULTS: A wide range of concentrations, durations, and methodologies have been tested but only 30 out of 3452 studies met our inclusion criteria. Different FTIR methods were used with the Attenuated Total Reflection (ATR) variant being the most common (21 studies). Investigated solutions included sodium hypochlorite (NaOCl), ethylenediaminetetraacetic-acid (EDTA), 1-hydroxyethylidene-1-1-diphosphonic-acid (HEDP), peracetic-acid (PAA), glycolic-acid (GA), and citric-acid (CA) though most focused on NaOCl and EDTA. All solutions had detectable effects on the FTIR signature of dentin. NaOCl mainly affects the organic signatures, revealing reduced amide/phosphate ratios with increasing concentrations. EDTA mainly effects the inorganic component, increasing with time and concentration, yet glycolic acid has stronger effects than EDTA on dentin. Beyond the type of irrigant and dentin exposure durations, concentration and protocol of application had strong effects. There is a lack of studies comparing similar irrigants under conditions that mimic clinical scenarios analyzing bulk sample because FTIR of powder dentin differs from bulk measurements. SIGNIFICANCE: The ideal root-canal irrigant should combine local disinfection properties with minimal compositional effects on healthy dentin. FTIR methods appear reliable to identify important changes in root dentin chemical composition. Such information can help understand when endodontic irrigation might lead to root degradation or possibly contribute to long term failures such as vertical fractures. Awareness of chemical damage from irrigation procedures may help clinicians select procedures that reduce deleterious effects on the root canal structures.

Influence of Cavity Lining on the 3-Year Clinical Outcome of Posterior Composite Restorations: A Randomized Controlled Clinical Trial.

The purpose of this randomized, split-mouth-designed controlled and single-blinded clinical study was to evaluate the 3-year clinical performance of Class I and Class II resin composite restorations placed with or without cavity lining with a flowable composite. Fifty patients with treatment needs in two premolars or molars were included. One of the teeth was restored using the nanohybrid composite (Grandio®SO, control group), in the test group a high viscosity flowable composite was additionally applied as a first layer. In both groups, the same self-etch adhesive system was applied. Clinical evaluation after 3 years was carried out using the modified USPHS/Ryge criteria. At the 3-year follow-up the recall rate was 92%. Four restorations failed in the test group (8.7%), three due to the loss of vitality and one after fracture. The control group exhibited a cumulative success rate of 100%, while the test group achieved a success rate of 91.3%. This led to significant differences in the annual failure rate (AFR) between the two groups, with rates of 0% and 2.9% (p < 0.05; Mann-Whitney U-test). After 3 years the cumulative survival rate including all restorations was 95.7%. Statistical analysis revealed significant differences for the parameters: tooth vitality, marginal discoloration, success rate, and AFR. The other parameters exhibited no significant differences. Consequently, the nanohybrid composite demonstrated excellent performance over a 3-year period, whereas the utilization of a flowable composite for the cavity lining did not appear to exert a beneficial influence on clinical outcomes.

Various irrigation protocols for final rinse to improve bond strengths of fiber posts inside the root canal.

Irrigation after post space preparation and its effects on the bond strength of different adhesive strategies are still an issue of interest. The aim of the present study was to investigate the effects of various irrigation protocols (IPs) on the push-out bond strengths of fiber posts. One-hundred and fifty extracted human anterior teeth were divided into three groups (n = 50 each) and endodontically treated. The post space was irrigated before post placement using the following five IPs in each group: IP1 (control): 5 ml of distilled water; IP2: 5.25% sodium hypochlorite (NaOCl) applied with passive ultrasonic irrigation (PUI); IP3: 1% NaOCl applied with PUI; IP4: 18% ethylenediaminetetracetic acid (EDTA) followed by 5.25% NaOCl; and IP5: 2% chlorhexidine (CHX). Fiber posts placement in each group was performed using three different adhesive strategies. A self-etch adhesive system revealed higher bond strength (16.2 ± 6.9 MPa) compared with an etch-and-rinse adhesive (8.5 ± 4.2 MPa) and a self-adhesive resin cement (9.2 ± 4.7 MPa). The use of 18% EDTA/5.25% NaOCl increased the bond strength of the self-adhesive resin cement. Conversely, this IP decreased the bond strength for the etch-and-rinse adhesive system, whilst 1% NaOCl enhanced the bond strength for the same system. Consequently, each adhesive strategy may need to be adapted to a specific IP.

The Interleukin 6 Protein Level as well as a Genetic Variants, (rs1800795, rs1800797) Are Associated with Adverse Cardiovascular Outcomes within 10-Years Follow-Up.

BACKGROUND: Worldwide, cardiovascular disease (CVD) is the leading cause of premature death. The proinflammatory cytokine interleukin 6 (IL-6) is a essential marker of innate immunity that is considered to play an important proatherogenic role for cardiovascular disease. The aim of this study (substudy of ClinTrials.gov identifier: NCT01045070) was to evaluate IL-6 protein level and genetic variants (rs1800795, rs1800797) with respect to CV outcome (combined endpoint: myocardial infarction, stroke/transient ischemic attack, cardiac death, death according to stroke) among patients CVD within 10-years follow-up. MATERIAL AND METHODS: Overall 1002 in-patients with CVD were included. IL-6 protein level was determined by electrochemiluminescence immunoassay (fasting, between 7 and 8 a.m.). Genetic analyses were carried out by single specific primer-polymerase chain reaction. RESULTS: In survival analyses, IL-6 protein levels of ≥6.4 pg/mL (log-rank test: p = 0.034; cox regression: p = 0.032, hazard ratio = 1.29) and CC genotype of rs1800795 (log-rank test: p < 0.001, cox regression: p < 0.001, hazard ratio = 1.72) and AA genotype of rs180797 (log-rank test: p = 0.002, cox regression: p < 0.001, hazard ratio = 1.62) were associated with a poorer CV prognosis considering combined CV endpoint. CONCLUSION: This study was the first to investigate both elevated IL-6 levels and genetic variants for their prognostic value for adverse CV outcomes in CVD patients within the 10-year follow-up period.

C-Reactive Protein Level and the Genetic Variant rs1130864 in the CRP Gene as Prognostic Factors for 10-Year Cardiovascular Outcome.

BACKGROUND: Cardiovascular disease (CVD) is the primary cause of premature death and disability worldwide. There is extensive evidence that inflammation represents an important pathogenetic mechanism in the development and prognosis of CVD. C-reactive protein (CRP) is a potential marker of vascular inflammation and plays a direct role in CVD by promoting vascular inflammation. The objective of this study (ClinTrials.gov identifier: NCT01045070) was to assess the prognostic impact of CRP protein levels and genetic variants of CRP gene events on cardiovascular (CV) outcome (10-year follow-up) in patients suffering from CVD. METHODS: CVD patients were prospectively included in this study (n = 1002) and followed up (10 years) regarding combined CV endpoint (CV death, death from stroke, myocardial infarction (MI), and stroke/transient ischemic attack (TIA)). CRP protein level (particle-enhanced immunological turbidity test) and genetic variants (rs1130864, rs1417938, rs1800947, rs3093077; polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) after DNA extraction from EDTA-blood) were evaluated. RESULTS: In survival analyses, increased CRP protein levels of ≥5 mg/L (log-rank test: p < 0.001, Cox regression: p = 0.002, hazard ratio = 1.49) and CT + TT genotype of rs1130864 (log-rank test: p = 0.041; Cox regression: p = 0.103, hazard ratio = 1.21) were associated with a weaker CV prognosis considering combined CV endpoint. CONCLUSIONS: Elevated CRP level and genetic variant (rs1130864) were proven to provide prognostic value for adverse outcome in CVD patients within the 10-year follow-up period.

Fiber post placement with core build-up materials or resin cements-an evaluation of different adhesive approaches.

OBJECTIVE: To compare push-out bond strength of fiber-posts luted with different adhesive approaches to root canal dentin. MATERIALS AND METHODS: Forty maxillary first incisors were decoronated and endodontically treated. Specimens were randomly distributed into five groups (n = 8) and fiber-posts (DentinPost coated, Komet) were inserted using five different luting materials: etch-and-rinse adhesive systems and corresponding core-and-post material in groups 1 (DentinBond/DentinBuild, Komet) and 2 (XP Bond + SCA/Core-X flow, Densply), self-adhesive resin cements in groups 3 (RelyX Unicem, 3M Espe) and 4 (SmartCem 2, Dentsply) and a self-etch adhesive/resin cement in group 5 (ED-Primer II/Panavia F 2.0, Kuraray). The roots were sectioned into eight 1 mm thick serial slices and within 48 h push-out bond strength was investigated. Statistical analyses were performed using non-parametrical Kruskal-Wallis H-test and Mann-Whitney U-test for differences between experimental groups at p < 0.05. The failure modes were analyzed using Chi square test. RESULTS: The bond strength [MPa] (mean/min-max) for groups 3 (12.35/3.60-32.44), 4 (13.52/4.48-30.69) and 2 (11.15/5.23-35.58) were significantly higher (p < 0.001) compared to groups 1 (6.66/2.34-24.89) and 5 (7.41/0.28-34.18). Adhesive failure between dentin and luting agent was the most frequent failure mode. CONCLUSIONS: Bond strength of fiber-posts adhesively luted to root canal dentin was significantly higher when self-adhesive resin cements were used. One (group 2) of the tested core-and-post materials/etch-and-rinse adhesive achieved comparable bond strength values.

Time-lapse submicrometer particle motion reveals residual strain evolution and damaging stress relaxation in clinical resin composites sealing human root canals.

Polymer based composites are widely used for treatment, for example as biofilm resistant seals of root canal fillings. Such clinical use, however, fails more frequently than other dental composite restorations, due to stress-related misfits. The reason for this is that the biomaterials used are inserted as viscous masses that may bond to the substrate, yet shrinkage stresses arising during setting of the cross-linking polymer, work against durable adhesion. Here we combine phase contrast enhanced time-lapse radiography (radioscopy), digital image correlation (DIC) and submicrometer resolution phase-contrast enhanced microtomography (PCE-CT), to reveal the spatial and temporal dynamics of composite polymerization and strain evolution. Radioscopy of cavities located in the upper part of human root canals demonstrates how the composite post-gelation "densification" is dominated by viscous flow with quantifiable motion of both particles and entrapped voids. Thereafter, these composites enter a "stress-relaxation" stage and exhibit several structural adaptations, induced by residual shrinkage stresses. Consequently critical alterations to the final biomaterial geometry emerge: (i) entrapped bubbles expand; (ii) microscopic root filling pull-out occurs; (iii) the cavity walls deform inwards, and (iv) occasionally delamination ensues, propagating out from the root canal filling along buried restoration-substrate interfaces. Our findings shed new light on the interactions between confined spaces and biomedical composites that cross-link in situ, highlighting the crucial role of geometry in channeling residual stresses. They further provide new insights into the emergence of structural flaws, calling attention to the need to find new treatment options. STATEMENT OF SIGNIFICANCE: This work quantifies recurring spatial and temporal material redistribution in composites used clinically to fill internal spaces in teeth. This knowledge is important for both promoting biomaterial resistance against potentially pathologic biofilms and for improving structural capacity to endure years of mechanical function. Our study demonstrates the significant role of geometry and the need for improved control over stress raisers to develop better treatment protocols and new space filling materials. The use of high-brilliance X-rays for time-lapse imaging at submicrometer resolution provides dynamic information about the damaging effects of stress relaxation due to polymerization shrinkage.