RESUMO
Emerging technologies for integrated optical circuits demand novel approaches and materials. This includes a search for nanoscale waveguides that should satisfy criteria of high optical density, small cross-section, technological feasibility and structural perfection. All these criteria are met with self-assembled gallium phosphide (GaP) epitaxial nanowires. In this work, the effects of the nanowire geometry on their waveguiding properties are studied both experimentally and numerically. Cut-off wavelength dependence on the nanowire diameter is analyzed to demonstrate the pathways for fabrication of low-loss and subwavelength cross-section waveguides for visible and near-infrared (IR) ranges. Probing the waveguides with a supercontinuum laser unveils the filtering properties of the nanowires due to their resonant action. The nanowires exhibit perfect elasticity allowing fabrication of curved waveguides. It is demonstrated that for the nanowire diameters exceeding the cut-off value, the bending does not sufficiently reduce the field confinement promoting applicability of the approach for the development of nanoscale waveguides with a preassigned geometry. Optical X-coupler made of two GaP nanowires allowing for spectral separation of the signal is fabricated. The results of this work open new ways for the utilization of GaP nanowires as elements of advanced photonic logic circuits and nanoscale interferometers.
RESUMO
Semiconductor nanowires are the perfect platform for nanophotonic applications owing to their resonant, waveguiding optical properties and technological capabilities providing control over their crystalline and chemical compositions. The vapor-liquid-solid growth mechanism allows the formation of hybrid metal-dielectric nanostructures promoting sub-wavelength light manipulation. In this work, we explore both experimentally and numerically the plasmonic effects promoted by a gallium (Ga) nanoparticle optical antenna decorating the facet of gallium phosphide (GaP) nanowires. Raman, photoluminescence and near-field mapping techniques are used to study the effects. We demonstrate several phenomena including field enhancement, antenna effect and increase in internal reflection. We show that the observed effects have to be considered when nanowires with a plasmonic particle are used in nanophotonic circuits and discuss the ways for utilization of these effects for efficient coupling of light into nanowire waveguide and field tailoring. The results open up promising pathways for the development of both passive and active nanophotonic elements, light harvesting and sensorics.
RESUMO
Au-catalyzed CdTe nanowires have been grown by close-space sublimation on Mo foils via the vapor-liquid-solid technique. Nanowire length (up to 25 µm) increased as a function of growth temperature and time. Nanowire average radius only started to increase after 20 min of growth. A model has been developed to quantitatively describe this observed growth behavior. The model takes into account the simultaneous lateral extension of nanowires (radii were in the range 150-550 nm), observed for longer growth times. Fitting the model to the experimental data yields a number of kinetic parameters. More importantly, the threshold character of the radius-time dependence as well as the essentially non-linear shape of the length-time relationship is well reproduced by the model.
RESUMO
The development of novel nanophotonic devices and circuits necessitates studies of optical phenomena in nanoscale structures. Catalyzed semiconductor nanowires are known for their unique properties including high crystallinity and silicon compatibility making them the perfect platform for optoelectronics and nanophotonics. In this work, we explore numerically optical properties of gallium phosphide nanowires governed by their dimensions and study waveguiding, coupling between the two wires and resonant field confinement to unveil nanoscale phenomena paving the way for the fabrication of the integrated optical circuits. Photonic coupling between the two adjacent nanowires is studied in detail to demonstrate good tolerance of the coupling to the distance between the two aligned wires providing losses not exceeding 30% for the gap of 100 nm. The dependence of this coupling is investigated with the wires placed nearby varying their relative position. It is found that due to the resonant properties of a nanowire acting as a Fabry-Perot cavity, two coupled wires represent an attractive system for control over the optical signal processing governed by the signal interference. We explore size-dependent plasmonic behaviors of the metallic Ga nanoparticle enabling GaP nanowire as an antenna-waveguide hybrid system. We demonstrate numerically that variation of the structure dimensions allows the nearfield tailoring. As such, we explore GaP NWs as a versatile platform for integrated photonic circuits.
RESUMO
Semiconductor nanowires exhibit numerous capabilities to advance the development of future optoelectronic devices. Among the III-V material family, gallium phosphide (GaP) is an attractive platform with low optical absorption and high nonlinear susceptibility, making it especially promising for nanophotonic applications. However, investigation of single nanostructures and their waveguiding properties remains challenging owing to typically planar experimental arrangements. Here we study the linear and nonlinear waveguiding optical properties of a single GaP nanowire in a special experimental layout, where an optically trapped structure is aligned along its major axis. We demonstrate efficient second harmonic generation in individual nanowires and unravel phase matching conditions, linking between linear guiding properties of the structure and its nonlinear tensorial susceptibility. The capability to pick up single nanowires, sort them with the aid of optomechanical manipulation and accurately position pre-tested structures opens a new avenue for the generation of optoelectronic origami-type devices.
RESUMO
Tailorable synthesis of axially heterostructured epitaxial nanowires (NWs) with a proper choice of materials allows for the fabrication of novel photonic devices, such as a nanoemitter in the resonant cavity. An example of the structure is a GaP nanowire with ternary GaPAs insertions in the form of nano-sized discs studied in this work. With the use of the micro-photoluminescence technique and numerical calculations, we experimentally and theoretically study photoluminescence emission in individual heterostructured NWs. Due to the high refractive index and near-zero absorption through the emission band, the photoluminescence signal tends to couple into the nanowire cavity acting as a Fabry-Perot resonator, while weak radiation propagating perpendicular to the nanowire axis is registered in the vicinity of each nano-sized disc. Thus, within the heterostructured nanowire, both amplitude and spectrally anisotropic photoluminescent signals can be achieved. Numerical modeling of the nanowire with insertions emitting in infrared demonstrates a decay in the emission directivity and simultaneous rise of the emitters coupling with an increase in the wavelength. The emergence of modulated and non-modulated radiation is discussed, and possible nanophotonic applications are considered.
RESUMO
Zinc oxide (ZnO) nanostructures are widely used in various fields of science and technology due to their properties and ease of fabrication. To achieve the desired characteristics for subsequent device application, it is necessary to develop growth methods allowing for control over the nanostructures' morphology and crystallinity governing their optical and electronic properties. In this work, we grow ZnO nanostructures via hydrothermal synthesis using surfactants that significantly affect the growth kinetics. Nanostructures with geometry from nanowires to hexapods are obtained and studied with photoluminescence (PL) spectroscopy. Analysis of the photoluminescence spectra demonstrates pronounced exciton on a neutral donor UV emission in all of the samples. Changing the growth medium chemical composition affects the emission characteristics sufficiently. Apart the UV emission, nanostructures synthesized without the surfactants demonstrate deep-level emission in the visible range with a peak near 620 nm. Structures synthesized with the use of sodium citrate exhibit emission peak near 520 nm, and those with polyethylenimine do not exhibit the deep-level emission. Thus, we demonstrate the correlation between the hydrothermal growth conditions and the obtained ZnO nanostructures' optical properties, opening up new possibilities for their precise control and application in nanophotonics, UV-Vis and white light sources.
RESUMO
Control and analysis of the crystal phase in semiconductor nanowires are of high importance due to the new possibilities for strain and band gap engineering for advanced nanoelectronic and nanophotonic devices. In this letter, we report the growth of the self-catalyzed GaP nanowires with a high concentration of wurtzite phase by molecular beam epitaxy on Si (111) and investigate their crystallinity. Varying the growth temperature and V/III flux ratio, we obtained wurtzite polytype segments with thicknesses in the range from several tens to 500 nm, which demonstrates the high potential of the phase bandgap engineering with highly crystalline self-catalyzed phosphide nanowires. The formation of rotational twins and wurtzite polymorph in vertical nanowires was observed through complex approach based on transmission electron microscopy, powder X-ray diffraction, and reciprocal space mapping. The phase composition, volume fraction of the crystalline phases, and wurtzite GaP lattice parameters were analyzed for the nanowires detached from the substrate. It is shown that the wurtzite phase formation occurs only in the vertically-oriented nanowires during vapor-liquid-solid growth, while the wurtzite phase is absent in GaP islands parasitically grown via the vapor-solid mechanism. The proposed approach can be used for the quantitative evaluation of the mean volume fraction of polytypic phase segments in heterostructured nanowires that are highly desirable for the optimization of growth technologies.
RESUMO
Tailorable synthesis of III-V semiconductor heterostructures in nanowires (NWs) enables new approaches with respect to designing photonic and electronic devices at the nanoscale. We present a comprehensive study of highly controllable self-catalyzed growth of gallium phosphide (GaP) NWs on template-free silicon (111) substrates by molecular beam epitaxy. We report the approach to form the silicon oxide layer, which reproducibly provides a high yield of vertical GaP NWs and control over the NW surface density without a pre-patterned growth mask. Above that, we present the strategy for controlling both GaP NW length and diameter independently in single- or two-staged self-catalyzed growth. The proposed approach can be extended to other III-V NWs.
RESUMO
Controlled growth of heterostructured nanowires and mechanisms of their formation have been actively studied during the last decades due to perspectives of their implementation. Here, we report on the self-catalyzed growth of axially heterostructured GaPN/GaP nanowires on Si(111) by plasma-assisted molecular beam epitaxy. Nanowire composition and structural properties were examined by means of Raman microspectroscopy and transmission electron microscopy. To study the optical properties of the synthesized nanoheterostructures, the nanowire array was embedded into the silicone rubber membrane and further released from the growth substrate. The reported approach allows us to study the nanowire optical properties avoiding the response from the parasitically grown island layer. Photoluminescence and Raman studies reveal different nitrogen content in nanowires and parasitic island layer. The effect is discussed in terms of the difference in vapor solid and vapor liquid solid growth mechanisms. Photoluminescence studies at low temperature (5K) demonstrate the transition to the quasi-direct gap in the nanowires typical for diluted nitrides with low N-content. The bright room temperature photoluminescent response demonstrates the potential application of nanowire/polymer matrix in flexible optoelectronic devices.
RESUMO
In this paper we study growth of quasi-one-dimensional GaN nanowires (NWs) and nanotube (NT)-like nanostructures on Si(111) substrates covered with a thin AlN layer grown by means of plasma-assisted molecular beam epitaxy. In the first part of our study we investigate the influence of the growth parameters on the geometrical properties of the GaN NW arrays. First, we find that the annealing procedure carried out prior to deposition of the AlN buffer affects the elongation rate and the surface density of the wires. It has been experimentally demonstrated that the NW elongation rate and the surface density drastically depend on the substrate growth temperature, where 800 °C corresponds to the maximum elongation rate of the NWs. In the second part of the study, we introduce a new dopant-stimulated method for GaN nanotube-like nanostructure synthesis using a high-intensity Si flux. Transmission electron microscopy was used to investigate the morphological features of the GaN nanostructures. The synthesized structures have a hexagonal cross-section and possess high crystal quality. We propose a theoretical model of the novel nanostructure formation which includes the role of the dopant Si. Some of the Si-doped samples were studied with the photoluminescence (PL) technique. The analysis of the PL spectra shows that the highest value of donor concentration in the nanostructures exceeds 5â1019 cm-3.