Delamination from an adhesive sphere: Curvature-induced dewetting versus buckling.

Everyday experience confirms the tendency of adhesive films to detach from spheroidal regions of rigid substrates-what is a petty frustration when placing a sticky band aid onto a knee is a more serious matter in the coating and painting industries. Irrespective of their resistance to bending, a key driver of such phenomena is Gauss' Theorema Egregium, which implies that naturally flat sheets cannot conform to doubly curved surfaces without developing a strain whose magnitude grows sharply with the curved area. Previous attempts to characterize the onset of curvature-induced delamination, and the complex patterns it gives rise to, assumed a dewetting-like mechanism in which the propensity of two materials to form contact through interfacial energy is modified by an elastic energy penalty. We show that this approach may characterize moderately bendable sheets but fails qualitatively to describe the curvature-induced delamination of ultrathin films, whose mechanics is governed by their propensity to buckle and delaminate partially, under minute levels of compression. Combining mechanical and geometrical considerations, we introduce a minimal model for curvature-induced delamination accounting for the two buckling motifs that underlie partial delamination: shallow "rucks" and localized "folds". We predict nontrivial scaling rules for the onset of curvature-induced delamination and various features of the emerging patterns, which compare well with experiments. Beyond gaining control on the use of ultrathin adhesives in cutting-edge technologies such as stretchable electronics, our analysis is a significant step toward quantifying the multiscale morphology that emerges upon imposing geometrical and mechanical constraints on highly bendable solid objects.

Flow-induced choking of a compliant Hele-Shaw cell.

After centuries of striving for structural rigidity, engineers and scientists alike are increasingly looking to harness the deformation, buckling, and failure of soft materials for functionality. In fluidic devices, soft deformable components that respond to the flow have the advantage of being passive; they do not require external actuation. Harnessing flow-induced deformation for passive functionality provides a means of developing flow analogs of electronic circuit components such as fluidic diodes and capacitors. The electronic component that has so far been overlooked in the microfluidics literature-the fuse-is a passive safety device that relies on a controlled failure mechanism (melting) to protect a circuit from overcurrent. Here, we describe how a compliant Hele-Shaw cell behaves in a manner analogous to the electrical fuse; above a critical flux, the flow-induced deformation of the cell blocks the outflow, interrupting (choking) the flow. In particular, the pressure distribution within the fluid applies a spatially variant normal force to the soft boundary, which causes nonuniform deformation. As a consequence of lateral confinement and incompressibility of the soft material, this flow-induced elastic deformation manifests as bulging near the cell outflow; bulges that come into contact with the rigid cell roof interrupt the flow. We identify two nondimensional parameters that govern the central deflection and the choking of the cell, respectively. This study therefore provides the mechanical foundations for engineering passive-flow limiters into fluidic devices.

Dynamics of wrinkling in ultrathin elastic sheets.

The wrinkling of thin elastic objects provides a means of generating regular patterning at small scales in applications ranging from photovoltaics to microfluidic devices. Static wrinkle patterns are known to be governed by an energetic balance between the object's bending stiffness and an effective substrate stiffness, which may originate from a true substrate stiffness or from tension and curvature along the wrinkles. Here, we investigate dynamic wrinkling induced by the impact of a solid sphere onto an ultrathin polymer sheet floating on water. The vertical deflection of the sheet's center induced by impact draws material radially inward, resulting in an azimuthal compression that is relieved by the wrinkling of the entire sheet. We show that this wrinkling is truly dynamic, exhibiting features that are qualitatively different to those seen in quasistatic wrinkling experiments. Moreover, we show that the wrinkles coarsen dynamically because of the inhibiting effect of the fluid inertia. This dynamic coarsening can be understood heuristically as the result of a dynamic stiffness, which dominates the static stiffnesses reported thus far, and allows control of wrinkle wavelength.

Dynamic Buckling of an Elastic Ring in a Soap Film.

Dynamic buckling may occur when a load is rapidly applied to, or removed from, an elastic object at rest. In contrast to its static counterpart, dynamic buckling offers a wide range of accessible patterns depending on the parameters of the system and the dynamics of the load. To study these effects, we consider experimentally the dynamics of an elastic ring in a soap film when part of the film is suddenly removed. The resulting change in tension applied to the ring creates a range of interesting patterns that cannot be easily accessed in static experiments. Depending on the aspect ratio of the ring's cross section, high-mode buckling patterns are found in the plane of the remaining soap film or out of the plane. Paradoxically, while inertia is required to observe these nontrivial modes, the selected pattern does not depend on inertia itself. The evolution of this pattern beyond the initial instability is studied experimentally and explained through theoretical arguments linking dynamics to pattern selection and mode growth. We also explore the influence of dynamic loading and show numerically that, by imposing a rate of loading that competes with the growth rate of instability, the observed pattern can be selected and controlled.

Cloaking by coating: how effectively does a thin, stiff coating hide a soft substrate?

From human tissue to fruits, many soft materials are coated by a thin layer of a stiffer material. While the primary role of such a coating is often to protect the softer material, the thin, stiff coating also has an important effect on the mechanical behaviour of the composite material, making it appear significantly stiffer than the underlying material. We study this cloaking effect of a coating for the particular case of indentation tests, which measure the 'firmness' of the composite solid: we use a combination of theory and experiment to characterize the firmness quantitatively. We find that the indenter size plays a key role in determining the effectiveness of cloaking: small indenters feel a mixture of the material properties of the coating and of the substrate, while large indenters sense largely the unadulterated substrate.

Wettability-Independent Droplet Transport by Bendotaxis.

We demonstrate "bendotaxis," a novel mechanism for droplet self-transport at small scales. A combination of bending and capillarity in a thin channel causes a pressure gradient that, in turn, results in the spontaneous movement of a liquid droplet. Surprisingly, the direction of this motion is always the same, regardless of the wettability of the channel. We use a combination of experiments at a macroscopic scale and a simple mathematical model to study this motion, focusing in particular on the timescale associated with the motion. We suggest that bendotaxis may be a useful means of transporting droplets in technological applications, e.g., in developing self-cleaning surfaces, and discuss the implications of our results for such applications.

Gigantic floating leaves occupy a large surface area at an economical material cost.

The giant Amazonian waterlily (genus Victoria) produces the largest floating leaves in the plant kingdom. The leaves' notable vasculature has inspired artists, engineers, and architects for centuries. Despite the aesthetic appeal and scale of this botanical enigma, little is known about the mechanics of these extraordinary leaves. For example, how do these leaves achieve gigantic proportions? We show that the geometric form of the leaf is structurally more efficient than those of other smaller species of waterlily. In particular, the spatially varying thickness and regular branching of the primary veins ensures the structural integrity necessary for extensive coverage of the water surface, enabling optimal light capture despite a relatively low leaf biomass. Leaf gigantism in waterlilies may have been driven by selection pressures favoring a large surface area at an economical material cost, for outcompeting other plants in fast-drying ephemeral pools.

Taming Electrowetting Using Highly Concentrated Aqueous Solutions.

Wetting of carbon surfaces is one of the most widespread, yet poorly understood, physical phenomena. Control over wetting properties underpins the operation of aqueous energy-storage devices and carbon-based filtration systems. Electrowetting, the variation in the contact angle with an applied potential, is the most straightforward way of introducing control over wetting. Here, we study electrowetting directly on graphitic surfaces with the use of aqueous electrolytes to show that reversible control of wetting can be achieved and quantitatively understood using models of the interfacial capacitance. We manifest that the use of highly concentrated aqueous electrolytes induces a fully symmetric and reversible wetting behavior without degradation of the substrate within the unprecedented potential window of 2.8 V. We demonstrate where the classical "Young-Lippmann" models apply, and break down, and discuss reasons for the latter, establishing relations among the applied bias, the electrolyte concentration, and the resultant contact angle. The approach is extended to electrowetting at the liquid|liquid interface, where a concentrated aqueous electrolyte drives reversibly the electrowetting response of an insulating organic phase with a significantly decreased potential threshold. In summary, this study highlights the beneficial effect of highly concentrated aqueous electrolytes on the electrowettability of carbon surfaces, being directly related to the performance of carbon-based aqueous energy-storage systems and electronic and microfluidic devices.

Guided droplet transport on synthetic slippery surfaces inspired by a pitcher plant.

We show how anisotropic, grooved features facilitate the trapping and directed transport of droplets on lubricated, liquid-shedding surfaces. Capillary action pins droplets to topographic surface features, enabling transport along the feature while inhibiting motion across (or detachment from) the feature. We demonstrate the robustness of this capillary-based mechanism for directed droplet transport on slippery surfaces by combining experiments on synthetic, lubricant-infused surfaces with observations on the natural trapping surface of a carnivorous pitcher plant. Controlling liquid navigation on synthetic surfaces promises to unlock significant potential in droplet-based technologies. Our observations also offer novel insight into the evolution of the Nepenthes pitcher plant, indicating that the 'pitfall' trapping mechanism is enhanced by the lubricant-infused, macroscopic grooves on the slippery peristome surface, which guide prey into the trap in a way that is more tightly controlled than previously considered.

Indentation of a floating elastic sheet: geometry versus applied tension.

The localized loading of an elastic sheet floating on a liquid bath occurs at scales from a frog sitting on a lily pad to a volcano supported by the Earth's tectonic plates. The load is supported by a combination of the stresses within the sheet (which may include applied tensions from, for example, surface tension) and the hydrostatic pressure in the liquid. At the same time, the sheet deforms, and may wrinkle, because of the load. We study this problem in terms of the (relatively weak) applied tension and the indentation depth. For small indentation depths, we find that the force-indentation curve is linear with a stiffness that we characterize in terms of the applied tension and bending stiffness of the sheet. At larger indentations, the force-indentation curve becomes nonlinear and the sheet is subject to a wrinkling instability. We study this wrinkling instability close to the buckling threshold and calculate both the number of wrinkles at onset and the indentation depth at onset, comparing our theoretical results with experiments. Finally, we contrast our results with those previously reported for very thin, highly bendable membranes.

Granular segregation in a thin drum rotating with periodic modulation.

We present the results of an experimental investigation into the effects of a sinusoidal modulation of the rotation rate on the segregation patterns formed in thin drum of granular material. The modulation transforms the base pattern formed under steady conditions by splitting or merging the initial streaks. Specifically, the relation between the frequency of modulation and the rotation rate determines the number of streaks which develop from the base state. The results are in accord with those of Fiedor and Ottino [J. Fluid. Mech. 533, 223 (2005)10.1017/S0022112005003952], and we show that their ideas apply over a wide range of parameter space. Furthermore, we provide evidence that the observed relationship is maintained for filling fractions far from 50% and generalize the result in terms of the geometry of the granular deposit.