RESUMO
Silver nanoparticles (AgNPs) are well-proven antimicrobial nanomaterials, yet little is elucidated regarding the mechanism underlying cytotoxicity induced by these nanoparticles. Here, we tested the hypothesis that mitochondria are primary intracellular targets of two AgNPs and silver ions in mouse hepatocytes (AML12) cultured in glucose- and galactose-based media. AML12 cells were more sensitive to mitochondrial uncoupling when grown with galactose rather than glucose. However, 24 h treatments with 15 nm AgNPs and 6 nm GA-AgNPs (5 and 10 µg/mL) and AgNO3 (1 and 3 µg/mL), concentrations that resulted in either 10 or 30% cytotoxicity, failed to cause more toxicity to AML12 cells grown on galactose than glucose. Furthermore, colocalization analysis and subcellular Ag quantification did not show any enrichment of silver content in mitochondria in either medium. Finally, the effects of the same exposures on mitochondrial respiration were mild or undetectable, a result inconsistent with mitochondrial toxicity causing cell death. Our results suggest that neither ionic Ag nor the AgNPs that we tested specifically target mitochondria and are inconsistent with mitochondrial dysfunction being the primary cause of cell death after Ag exposure under these conditions.
RESUMO
Desktop fused deposition modeling (FDM®) three-dimensional (3D) printers are becoming increasingly popular in schools, libraries, and among home hobbyists. FDM® 3D printers have been shown to release ultrafine airborne particles in large amounts, indicating the potential for inhalation exposure and consequent health risks among FDM® 3D printer users and other room occupants including children. These particles are generated from the heating of thermoplastic polymer feedstocks during the FDM® 3D printing process, with the most commonly used polymers being acrylonitrile butadiene styrene (ABS) and poly-lactic acid (PLA). Risk assessment of these exposures demands estimation of internal dose, especially to address intra-human variability across life stages. Dosimetry models have proven to effectively translate particle exposures to internal dose metrics relevant to evaluation of their effects in the respiratory tract. We used the open-access multiple path particle dosimetry (MPPD v3.04) model to estimate inhaled particle deposition in different regions of the respiratory tract for children of various age groups from three months to eighteen years old adults. Mass concentration data for input into the MPPD model were calculated using particle size distribution and density data from experimental FDM® 3D printer emissions tests using both ABS and PLA. The impact of changes in critical parameters that are principal determinants of inhaled dose, including: sex, age, and exposure duration, was examined using input parameter values available from the International Commission on Radiological Protection. Internal dose metrics used included regional mass deposition, mass deposition normalized by pulmonary surface area, surface area of deposited particles by pulmonary surface area, and retained regional mass. Total mass deposition was found to be highest in the 9-year-old to 18-year-old age groups with mass deposition by pulmonary surface area highest in 3-month-olds to 9-year-olds and surface area of deposited particles by pulmonary surface area to be highest in 9-year-olds. Clearance modeling revealed that frequent 3D printer users are at risk for an increased cumulative retained dose.
RESUMO
The remarkable advances coming about through nanotechnology promise to revolutionize many aspects of modern life; however, these advances come with a responsibility for due diligence to ensure that they are not accompanied by adverse consequences for human health or the environment. Many novel nanomaterials (having at least one dimension <100 nm) could be highly mobile if released into the environment and are also very reactive, which has raised concerns for potential adverse impacts including, among others, the potential for neurotoxicity. Several lines of evidence led to concerns for neurotoxicity, but perhaps none more than observations that inhaled nanoparticles impinging on the mucosal surface of the nasal epithelium could be internalized into olfactory receptor neurons and transported by axoplasmic transport into the olfactory bulbs without crossing the blood-brain barrier. From the olfactory bulb, there is concern that nanomaterials may be transported deeper into the brain and affect other brain structures. Of course, people will not be exposed to only engineered nanomaterials, but rather such exposures will occur in a complex mixture of environmental materials, some of which are incidentally generated particles of a similar inhalable size range to engineered nanomaterials. To date, most experimental studies of potential neurotoxicity of nanomaterials have not considered the potential exposure sources and pathways that could lead to exposure, and most studies of nanomaterial exposure have not considered potential neurotoxicity. Here, we present a review of potential sources of exposures to nanoparticles, along with a review of the literature on potential neurotoxicity of nanomaterials. We employ the linked concepts of an aggregate exposure pathway (AEP) and an adverse outcome pathway (AOP) to organize and present the material. The AEP includes a sequence of key events progressing from material sources, release to environmental media, external exposure, internal exposure, and distribution to the target site. The AOP begins with toxicant at the target site causing a molecular initiating event and, like the AEP, progress sequentially to actions at the level of the cell, organ, individual, and population. Reports of nanomaterial actions are described at every key event along the AEP and AOP, except for changes in exposed populations that have not yet been observed. At this last stage, however, there is ample evidence of population level effects from exposure to ambient air particles that may act similarly to engineered nanomaterials. The data give an overall impression that current exposure levels may be considerably lower than those reported experimentally to be neurotoxic. This impression, however, is tempered by the absence of long-term exposure studies with realistic routes and levels of exposure to address concerns for chronic accumulation of materials or damage. Further, missing across the board are "key event relationships", which are quantitative expressions linking the key events of either the AEP or the AOP, making it impossible to quantitatively project the likelihood of adverse neurotoxic effects from exposure to nanomaterials or to estimate margins of exposure for such relationships.
Assuntos
Encéfalo/efeitos dos fármacos , Exposição por Inalação/efeitos adversos , Nanoestruturas/toxicidade , Rotas de Resultados Adversos , Animais , Humanos , Nanoestruturas/efeitos adversosRESUMO
Engineered nanomaterials (ENM) are a growing aspect of the global economy, and their safe and sustainable development, use, and eventual disposal requires the capability to forecast and avoid potential problems. This review provides a framework to evaluate the health and safety implications of ENM releases into the environment, including purposeful releases such as for antimicrobial sprays or nano-enabled pesticides, and inadvertent releases as a consequence of other intended applications. Considerations encompass product life cycles, environmental media, exposed populations, and possible adverse outcomes. This framework is presented as a series of compartmental flow diagrams that serve as a basis to help derive future quantitative predictive models, guide research, and support development of tools for making risk-based decisions. After use, ENM are not expected to remain in their original form due to reactivity and/or propensity for hetero-agglomeration in environmental media. Therefore, emphasis is placed on characterizing ENM as they occur in environmental or biological matrices. In addition, predicting the activity of ENM in the environment is difficult due to the multiple dynamic interactions between the physical/chemical aspects of ENM and similarly complex environmental conditions. Others have proposed the use of simple predictive functional assays as an intermediate step to address the challenge of using physical/chemical properties to predict environmental fate and behavior of ENM. The nodes and interactions of the framework presented here reflect phase transitions that could be targets for development of such assays to estimate kinetic reaction rates and simplify model predictions. Application, refinement, and demonstration of this framework, along with an associated knowledgebase that includes targeted functional assay data, will allow better de novo predictions of potential exposures and adverse outcomes.
Assuntos
Ecotoxicologia/métodos , Saúde Ambiental , Poluentes Ambientais/toxicidade , Nanoestruturas/toxicidade , Humanos , Modelos Teóricos , Medição de Risco , SegurançaRESUMO
There is a need to accurately detect, characterize, and quantify nanoparticles in suspensions. This study helps to understand the complex interactions between similar types of nanoparticles. Before initiating a study of metal nanoparticles, five submicron PS beads with sizes between 200 nm and 1 µm were used to derive a reference scale that was useful in evaluating the flow cytometer for functionality, sensitivity, resolution, and reproducibility. Side scatter intensity (SSC) from metal nanoparticles was obtained simultaneously from 405 nm and 488 nm lasers. The 405 nm laser generally yielded histogram distributions with smaller CVs, less side scatter intensity, better separation indices between beads and decreased scatter differences between different sized particles compared with the 488 nm laser. Submicron particles must be diluted to 10(6) and 10(7) particles/mL before flow cytometer analysis to avoid coincidence counting artifacts. When particles were too concentrated the following occurred: swarm, electronic overload, coincidence counting, activation of doublet discrimination and rejection circuitry, increase of mean SSC histogram distributions, alterations of SSC and pulse width histogram shape, decrease and fluctuations in counting rate and decrease or elimination of particulate water noise and 1 µm reference bead. To insure that the concentrations were in the proper counting range, the nanoparticle samples were mixed with a known concentration of 1 µm counting beads. Sequential dilutions of metal nanoparticles in a 1 µm counting bead suspension helped determine the diluted concentration needed for flow cytometer analysis. It was found that the original concentrated nanoparticle samples had to be diluted, between 1:10,000 and 1:100,000, before characterization by flow cytometry. The concentration of silver or gold nanoparticles in the undiluted sample were determined by comparing them with a known concentration (1.9 × 10(6) beads/mL) of 1 µm polystyrene reference beads.
Assuntos
Citometria de Fluxo/métodos , Ouro/química , Nanopartículas Metálicas/química , Prata/química , Citometria de Fluxo/normas , Lasers , Microesferas , Tamanho da Partícula , Padrões de ReferênciaRESUMO
Ethanol (EtOH) exposure induces a variety of concentration-dependent neurological and developmental effects in the rat. Physiologically-based pharmacokinetic (PBPK) models have been used to predict the inhalation exposure concentrations necessary to produce blood EtOH concentrations (BEC) in the range associated with these effects. Previous laboratory reports often lacked sufficient detail to adequately simulate reported exposure scenarios associated with BECs in this range, or lacked data on the time-course of EtOH in target tissues (e.g. brain, liver, eye, fetus). To address these data gaps, inhalation studies were performed at 5000, 10 000, and 21 000 ppm (6 h/d) in non-pregnant female Long-Evans (LE) rats and at 21 000 ppm (6.33 h/d) for 12 d of gestation in pregnant LE rats to evaluate our previously published PBPK models at toxicologically-relevant blood and tissue concentrations. Additionally, nose-only and whole-body plethysmography studies were conducted to refine model descriptions of respiration and uptake within the respiratory tract. The resulting time-course and plethysmography data from these in vivo studies were compared to simulations from our previously published models, after which the models were recalibrated to improve descriptions of tissue dosimetry by accounting for dose-dependencies in pharmacokinetic behavior. Simulations using the recalibrated models reproduced these data from non-pregnant, pregnant, and fetal rats to within a factor of 2 or better across datasets, resulting in a suite of model structures suitable for simulation of a broad range of EtOH exposure scenarios.
Assuntos
Etanol/farmacocinética , Exposição por Inalação , Exposição Materna , Troca Materno-Fetal/fisiologia , Modelos Biológicos , Animais , Encéfalo/embriologia , Encéfalo/metabolismo , Testes Respiratórios , Relação Dose-Resposta a Droga , Etanol/sangue , Etanol/toxicidade , Olho/embriologia , Olho/metabolismo , Feminino , Sangue Fetal/metabolismo , Idade Gestacional , Exposição por Inalação/efeitos adversos , Exposição por Inalação/análise , Cinética , Fígado/embriologia , Fígado/metabolismo , Exposição Materna/efeitos adversos , Troca Materno-Fetal/efeitos dos fármacos , Pletismografia , Gravidez , Ratos Long-EvansRESUMO
Concerns about the safety of manufacturing and using engineered nanomaterials (ENMs) have been increasing as the technology continues to expand. Efforts have been underway to investigate the potentially harmful effects of ENMs without carrying out the challenging empirical studies. To make such investigations possible, the US EPA Office of Research and Development (ORD) developed the nanomaterial database NaKnowBase (NKB) containing the detail of hundreds of assays conducted and published by ORD scientists experimentally investigating the environmental health and safety effects of ENMs (nanoEHS). This article describes specifics of the effort to mine, refine, and analyse the NKB. Here we use a quantitative structure activity relationship (QSAR) analysis, using a random forest of decision trees to predict the in vitro cell viability effects that occur upon exposure to ENMs that are similar in composition and structure and implement a set of laboratory conditions. These predictions are confirmed using the Jaqpot cloud platform developed by the National Technical University of Athens, Greece (NTUA) where nanoEHS effects are investigated with scientists working together globally.
RESUMO
Titanium dioxide nanoparticles (nano-TiO(2)) catalyze reactions under UV radiation and are hypothesized to cause phototoxicity. A human-derived line of retinal pigment epithelial cells (ARPE-19) was treated with six samples of nano-TiO(2) and exposed to UVA radiation. The TiO(2) nanoparticles were independently characterized to have mean primary particle sizes and crystal structures of 22nm anatase/rutile, 25nm anatase, 31nm anatase/rutile, 59nm anatase/rutile, 142nm anatase, and 214nm rutile. Particles were suspended in cell culture media, sonicated, and assessed for stability and aggregation by dynamic light scattering. Cells were treated with 0, 0.3, 1, 3, 10, 30, or 100µg/ml nano-TiO(2) in media for 24hrs and then exposed to UVA (2hrs, 7.53J/cm(2)) or kept in the dark. Viability was assessed 24hrs after the end of UVA exposure by microscopy with a live/dead assay (calcein-AM/propidium iodide). Exposure to higher concentrations of nano-TiO(2) with UVA lowered cell viability. The 25nm anatase and 31nm anatase/rutile were the most phototoxic (LC(50) with UVA<5µg/ml), while the 142nm anatase and 214nm rutile were the least phototoxic. An acellular assay ranked TiO(2) nanoparticles for their UVA photocatalytic reactivities. The particles were found to be capable of generating thiobarbituric acid reactive substances (TBARS) under UVA. Flow cytometry showed that nano-TiO(2) combined with UVA decreased cell viability and increased the generation of reactive oxygen species (ROS, measured by Mitosox). LC(50) values under UVA were correlated with TBARS reactivity, particle size, and surface area.
Assuntos
Nanopartículas Metálicas/toxicidade , Espécies Reativas de Oxigênio/metabolismo , Epitélio Pigmentado da Retina/efeitos dos fármacos , Titânio/toxicidade , Raios Ultravioleta/efeitos adversos , Sobrevivência Celular/efeitos dos fármacos , Sobrevivência Celular/efeitos da radiação , Células Cultivadas , Relação Dose-Resposta a Droga , Citometria de Fluxo , Humanos , Concentração Inibidora 50 , Dose Letal Mediana , Luz , Nanopartículas Metálicas/administração & dosagem , Nanopartículas Metálicas/química , Tamanho da Partícula , Epitélio Pigmentado da Retina/metabolismo , Epitélio Pigmentado da Retina/efeitos da radiação , Espalhamento de Radiação , Titânio/administração & dosagem , Titânio/químicaRESUMO
Biofuel blends of 10% ethanol (EtOH) and gasoline are common in the USA, and higher EtOH concentrations are being considered (15-85%). Currently, no physiologically-based pharmacokinetic (PBPK) models are available to describe the kinetics of EtOH-based biofuels. PBPK models were developed to describe life-stage differences in the kinetics of EtOH alone in adult, pregnant, and neonatal rats for inhalation, oral, and intravenous routes of exposure, using data available in the open literature. Whereas ample data exist from gavage and intravenous routes of exposure, kinetic data from inhalation exposures are limited, particularly at concentrations producing blood and target tissue concentrations associated with developmental neurotoxicity. Compared to available data, the three models reported in this paper accurately predicted the kinetics of EtOH, including the absorption, peak concentration, and clearance across multiple datasets. In general, model predictions for adult and pregnant animals matched inhalation and intravenous datasets better than gavage data. The adult model was initially better able to predict the time-course of blood concentrations than was the neonatal model. However, after accounting for age-related changes in gastric uptake using the calibrated neonate model, simulations consistently reproduced the early kinetic behavior in blood. This work provides comprehensive multi-route life-stage models of EtOH pharmacokinetics and represents a first step in development of models for use with gasoline-EtOH blends, with additional potential applicability in investigation of the pharmacokinetics of EtOH abuse, addiction, and toxicity.
Assuntos
Etanol/farmacocinética , Modelos Biológicos , Animais , Animais Recém-Nascidos , Biocombustíveis , Simulação por Computador , Vias de Administração de Medicamentos , Etanol/administração & dosagem , Etanol/metabolismo , Feminino , Gravidez , RatosRESUMO
The US EPA Office of Research and Development (ORD) has conducted a research program assessing potential risks of emerging materials and technologies, including engineered nanomaterials (ENM). As a component of that program, a nanomaterial knowledge base, termed "NaKnowBase", was developed containing the results of published ORD research relevant to the potential environmental and biological actions of ENM. The experimental data address issues such as ENM release into the environment; fate, transport and transformations in environmental media; exposure to ecological species or humans; and the potential for effects on those species. The database captures information on the physicochemical properties of ENM tested, assays performed and their parameters, and the results obtained. NaKnowBase (NKB) is a relational SQL database, and may be queried either with SQL code or through a user-friendly web interface. Filtered results may be output in spreadsheet format for subsequent user-defined analyses. Potential uses of the data might include input to quantitative structure-activity relationships (QSAR), meta-analyses, or other investigative approaches.
RESUMO
To date, approximately 200 chemicals have been tested in US Environmental Protection Agency (EPA) or Organization for Economic Co-operation and Development (OECD) developmental neurotoxicity (DNT) guideline studies, leaving thousands of chemicals without traditional animal information on DNT hazard potential. To address this data gap, a battery of in vitro DNT new approach methodologies (NAMs) has been proposed. Evaluation of the performance of this battery will increase the confidence in its use to determine DNT chemical hazards. One approach to evaluate DNT NAM performance is to use a set of chemicals to evaluate sensitivity and specificity. Since a list of chemicals with potential evidence of in vivo DNT has been established, this study aims to develop a curated list of "negative" chemicals for inclusion in a "DNT NAM evaluation set". A workflow, including a literature search followed by an expert-driven literature review, was used to systematically screen 39 chemicals for lack of DNT effect. Expert panel members evaluated the scientific robustness of relevant studies to inform chemical categorizations. Following review, the panel discussed each chemical and made categorical determinations of "Favorable", "Not Favorable", or "Indeterminate" reflecting acceptance, lack of suitability, or uncertainty given specific limitations and considerations, respectively. The panel determined that 10, 22, and 7 chemicals met the criteria for "Favorable", "Not Favorable", and "Indeterminate", for use as negatives in a DNT NAM evaluation set. Ultimately, this approach not only supports DNT NAM performance evaluation but also highlights challenges in identifying large numbers of negative DNT chemicals.
Assuntos
Síndromes Neurotóxicas , Testes de Toxicidade , Animais , Síndromes Neurotóxicas/etiologia , Projetos de Pesquisa , Testes de Toxicidade/métodos , Estados Unidos , United States Environmental Protection AgencyRESUMO
Acute solvent exposures may contribute to automobile accidents because they increase reaction time and decrease attention, in addition to impairing other behaviors. These effects resemble those of ethanol consumption, both with respect to behavioral effects and neurological mechanisms. These observations, along with the extensive data on the relationship between ethanol consumption and fatal automobile accidents, suggested a way to estimate the probability of fatal automobile accidents from solvent inhalation. The problem can be approached using the logic of the algebraic transitive postulate of equality: if A=B and B=C, then A=C. We first calculated a function describing the internal doses of solvent vapors that cause the same magnitude of behavioral impairment as ingestion of ethanol (A=B). Next, we fit a function to data from the literature describing the probability of fatal car crashes for a given internal dose of ethanol (B=C). Finally, we used these two functions to generate a third function to estimate the probability of a fatal car crash for any internal dose of organic solvent vapor (A=C). This latter function showed quantitatively (1) that the likelihood of a fatal car crash is increased by acute exposure to organic solvent vapors at concentrations less than 1.0 ppm, and (2) that this likelihood is similar in magnitude to the probability of developing leukemia from exposure to benzene. This approach could also be applied to other potentially adverse consequences of acute exposure to solvents (e.g., nonfatal car crashes, property damage, and workplace accidents), if appropriate data were available.
Assuntos
Acidentes de Trânsito/mortalidade , Poluentes Atmosféricos/toxicidade , Exposição Ambiental , Solventes/toxicidade , Benzeno/toxicidade , Etanol/sangue , Etanol/toxicidade , Humanos , Exposição por Inalação , Solventes/administração & dosagemRESUMO
The Adverse Outcome Pathway (AOP) framework is serving as a basis to integrate new data streams in order to enhance the power of predictive toxicology. AOP development for engineered nanomaterials (ENM), including silver nanoparticles (AgNP), is currently lagging behind other chemicals of regulatory interest due to our limited understanding of the mechanism by which underlying genetics or diseases directly modify host response to AgNP exposures. This also highlights the importance of considering the Aggregate Exposure Pathway (AEP) framework, which precedes the AOP framework and outlines source to target site exposure. The AEP and AOP frameworks interface at the target site, where a molecular initiating event (MIE) occurs and is followed by key events (KE) for adverse cellular and organ responses along a biological pathway and ends with the adverse organism response. The primary goal of this study is to use AgNP to interrogate the AEP-AOP framework by organizing and integrating in vitro dose-response data and in vivo exposure-response data from previous studies to evaluate the effects of interactions between host genetic and acquired factors, or gene × environment interactions (G × E), on AgNP toxicity in the respiratory system. Using this framework will help us to identify plausible key event relationships (KER) between MIE and adverse organism responses when KE are not measured using the same assay in order to derive future predictive models, guide research, and support development of tools for making risk-based, regulatory decisions on ENM. This article is categorized under: Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials Toxicology and Regulatory Issues in Nanomedicine > Regulatory and Policy Issues in Nanomedicine.
Assuntos
Rotas de Resultados Adversos , Interação Gene-Ambiente , Nanopartículas Metálicas , Sistema Respiratório , Prata , Animais , Humanos , Nanopartículas Metálicas/toxicidade , Sistema Respiratório/efeitos dos fármacos , Sistema Respiratório/fisiopatologia , Medição de Risco , Prata/toxicidadeRESUMO
Risk assessments of manganese by inhalation or oral routes of exposure typically acknowledge the duality of manganese as an essential element at low doses and a toxic metal at high doses. Previously, however, risk assessors were unable to describe manganese pharmacokinetics quantitatively across dose levels and routes of exposure, to account for mass balance, and to incorporate this information into a quantitative risk assessment. In addition, the prior risk assessment of inhaled manganese conducted by the U.S. Environmental Protection Agency (EPA) identified a number of specific factors that contributed to uncertainty in the risk assessment. In response to a petition regarding the use of a fuel additive containing manganese, methylcyclopentadienyl manganese tricarbonyl (MMT), the U.S. EPA developed a test rule under the U.S. Clean Air Act that required, among other things, the generation of pharmacokinetic information. This information was intended not only to aid in the design of health outcome studies, but also to help address uncertainties in the risk assessment of manganese. To date, the work conducted in response to the test rule has yielded substantial pharmacokinetic data. This information will enable the generation of physiologically based pharmacokinetic (PBPK) models capable of making quantitative predictions of tissue manganese concentrations following inhalation and oral exposure, across dose levels, and accounting for factors such as duration of exposure, different species of manganese, and changes of age, gender, and reproductive status. The work accomplished in response to the test rule, in combination with other scientific evidence, will enable future manganese risk assessments to consider tissue dosimetry more comprehensively than was previously possible.
Assuntos
Manganês/farmacologia , Manganês/toxicidade , Oligoelementos/farmacologia , Oligoelementos/toxicidade , Relação Dose-Resposta a Droga , Exposição Ambiental , Monitoramento Ambiental , Humanos , Exposição por Inalação , Manganês/administração & dosagem , Manganês/farmacocinética , Necessidades Nutricionais , Medição de Risco , Oligoelementos/administração & dosagem , Oligoelementos/farmacocinética , Incerteza , Estados Unidos , United States Environmental Protection AgencyRESUMO
We describe here two optical microscopy techniques-dark-field confocal light scanning microscopy (DF-CLSM) and dark-field wide-field confocal microscopy (DF-WFCM), that can be used to study interaction between nanoparticles and cells in 3D space. Dark field microscopy can detect very small structures below the diffraction limit of conventional light microscopes, while a confocal setup provides vertical sectioning capabilities to render specimens in 3D. The use of DF-WFCM instead of DF-CLSM allows faster sample processing but yields lower resolution. We used a retinal pigment epithelial cell line ARPE-19 to illustrate different optical and lighting conditions necessary for optimal imaging of metal and metal oxide nanoparticles (TiO2 and Ag). Our experimental setup primarily involved an E-800 Nikon and Nikon Ni upright microscopes and a Nikon Ti2 microscope connected to a xenon light source along with special dark-field objectives. For confocal studies we used either Leica and Nikon inverted confocal microscopes. For microscopic analyses, ARPE-19 cells were fixed in situ in cultured chamber slides or collected from T-25 flasks and then fixed in suspension. At the lowest concentrations of TiO2 or Ag tested (0.1-0.3 µg/mL), we were able to detect as few as 5-10 nanoparticles per cell due to intense light scattering by the particles. The degree of brightness detected indicated that the uptake of nanoparticles within ARPE-19 cells could be monitored using dark-field microscopy. Here we describe how to use wide-field microscopy to follow nanoparticle uptake by cells and how to assess some aspects of cellular health in in vitro cell cultures exposed to nanoparticles.
Assuntos
Nanopartículas Metálicas/química , Prata/análise , Titânio/análise , Linhagem Celular , Citometria de Fluxo , Células Hep G2 , Humanos , Microscopia ConfocalRESUMO
Evaluation of the potential hazard of man-made nanomaterials has been hampered by a limited ability to observe and measure nanoparticles in cells. A FACSCalibur™ flow cytometer and a Stratedigm S-1000 flow cytometer were used to measure changes in light scatter from cells after incubation with either silver nanoparticles (AgNP) or TiO2 nanoparticles. Within the range of between 0.1 µg/mL and 30 µg/mL the nanoparticles caused a proportional increase of the side scatter and decrease of the forward scatter intensity signals. At the lowest concentrations of TiO2 (ranging between 0.1 µg/mL and 0.3 µg/mL), the flow cytometer can detect as few as 5-10 nanoparticles per cell. The influence of nanoparticles on the cell cycle was detected by nonionic detergent lysis of nanoparticle incubated cells that were stained with DAPI or propidium iodide (PI). Viability of nanoparticle treated cells was determined by PI exclusion. Surface plasmonic resonance (SPR) was detected primarily in the far-red fluorescence detection channels after excitation with a 488 nm laser.Our results suggest that the uptake of nanoparticles within cells can be monitored using flow cytometry. This uptake of nanoparticle data was confirmed by viewing the nanoparticles in the cells using dark-field microscopy. The flow cytometry detection of nanoparticles approach may help fill a critical need to assess the relationship between nanoparticle dose and cellular toxicity. Such experiments using nanoparticles could potentially be performed quickly and easily using the flow cytometer to measure both nanoparticle uptake and cellular health.
Assuntos
Citometria de Fluxo/instrumentação , Prata/análise , Titânio/análise , Ciclo Celular/efeitos dos fármacos , Linhagem Celular , Sobrevivência Celular/efeitos dos fármacos , Humanos , Nanopartículas Metálicas , Prata/farmacologia , Ressonância de Plasmônio de Superfície , Titânio/farmacologiaRESUMO
During studies on the absorption and interactions between silver nanoparticles and mammalian cells grown in vitro it was observed that large extracellular rings of silver nanoparticles were deposited on the microscope slide, many located near post-mitotic cells. Silver nanoparticles (AgNP, 80nm), coated with citrate, were incubated at concentrations of 0.3 to 30 µg/ml with a human-derived culture of retinal pigment epithelial cells (ARPE-19) and observed using darkfield and fluorescent microscopy, 24 h after treatment. Approximately cell-sized extracellular rings of deposited AgNP were observed on the slides among a field of dispersed individual AgNP. The mean diameter of 45 nanoparticles circles was 62.5 +/-12 microns. Ring structures were frequently observed near what appeared to be post-mitotic daughter cells, giving rise to the possibility that cell membrane fragments were deposited on the slide during mitosis, and those fragments selectively attracted and retained silver nanoparticles from suspension in the cell culture medium. These circular structures were observable for the following technical reasons: 1) darkfield microscope could observe single nanoparticles below 100 nm in size, 2) a large concentration (108 and 109) of nanoparticles was used in these experiments 3) negatively charged nanoparticles were attracted to adhesion membrane proteins remaining on the slide from mitosis. The observation of silver nanoparticles attracted to apparent remnants of cellular mitosis could be a useful tool for the study of normal and abnormal mitosis.
Assuntos
Nanopartículas Metálicas/análise , Mitose , Prata/análise , Linhagem Celular , Humanos , Microscopia de Fluorescência/métodos , Organelas/químicaRESUMO
Fused Deposition Modeling (FDM®), also known as Fused Filament Fabrication (FFF), 3D printers have been shown in numerous studies to emit ultrafine particles and volatile organic compounds (VOCs). Filament extruders, designed to create feedstocks for 3D printers, have recently come onto the consumer market for at-home hobbyists as an alternative to buying 3D printer filaments. These instruments allow for the creation of 3D printer filaments from raw plastic pellets. Given the similarity in processes and materials used by 3D printers and filament extruders, we hypothesized that filament extruders may also release ultrafine particle emissions and VOCs. An off-the-shelf filament extruder was operated in a 2 m3 chamber using three separate feedstocks: acrylonitrile butadiene styrene (ABS) pellets, pulverized poly-lactic acid (PLA), and PLA pellets. Ultrafine particle emissions were measured in real-time using a scanning mobility particle sizer and thermal desorption tubes were used for both non-targeted and targeted analysis of VOCs present in emissions. Ultrafine particle number emission rates were comparable to those found in 3D printer studies with the greatest to least emission rates from ABS pellets, pulverized PLA, and PLA pellets, respectively. In addition, the majority of particles released were found to be ultrafine (1-100 nm), similar to 3D printer studies. A variety of VOCs were identified using the ABS feedstock, including styrene and ethylbenzene, and PLA feedstock. Styrene average mass concentration amounts were found to be near the EPA Integrated Risk Information System Reference Concentration for Inhalation Exposure for 3 min and 5 min samples. Further studies will be needed to determine the impact on emissions of environmental volume, air exchange rate, and extruder settings such as extrusion speed and temperature. The results support the hypothesis that use of a filament extruder may present an additional exposure risk to 3D printer hobbyists.
RESUMO
The literature concerning the neurobehavioral and neurophysiological effects of long-term exposure to perchloroethylene (PERC) in humans was meta-analyzed to provide a quantitative review and synthesis in the form of dose-effect curves. The useable database from this literature comprised studies reporting effects of long-term exposure to PERC, effects that included slowed reaction times, cognitive deficits, impaired color vision, and reduced visual contrast sensitivity. For the meta-analyses, dose was defined as the product of the concentration inhaled PERC and the duration of exposure, expressed in unites of ppm-h/1000 (for numerical convenience). Dose-related results were highly variable across studies. Reports involving low exposure concentrations characteristic of nonoccupational exposures consistently produced effects of a magnitude that were comparable to those reported for higher concentration occupational studies. If this finding is reliable and general, studies of occupationally exposed persons may underestimate the magnitude of effects of PERC and other chemicals in the total population. Given the limited scope of the available data for PERC and its methodological and reporting problems (small sample sizes, testers were not blind to the subjects' exposure conditions, and the timing and location of testing were insufficiently documented), it seems important to test this conclusion with a well-documented study of two groups (occupational and nonoccupational exposure) in which subjects are evaluated in randomized order, using the same procedures and with the testers kept blind to the status of the subjects.
Assuntos
Doenças do Sistema Nervoso Central/induzido quimicamente , Exposição Ambiental/efeitos adversos , Tetracloroetileno/efeitos adversos , Relação Dose-Resposta a Droga , Humanos , Fatores de Tempo , Acuidade Visual/efeitos dos fármacosRESUMO
Fused deposition modeling (FDM) 3D printers, the most popular choice among home hobbyists, have been shown to release volatile organic chemicals (VOCs) and billions of airborne particles per minute, indicating the potential for consumer inhalation exposure and consequent health risks. Publications on FDM 3D printer emissions however, contain large heterogeneity of testing methods and analytical procedures making it difficult to reach overall conclusions for particle characteristics or particle number emission rates across the field. In this publication, data were collected over the printing time from 3D printer emission studies including particle count diameters (PCDs) (nanometers), particle number concentrations (PNCs) (particles/cm3), and particle number emission rates (PNERs) (particlesâ¯min-1). Despite heterogeneity in methods, the majority of particles released were reported as ultrafine in size (i.e., <100â¯nm) indicating that using both acrylonitrile butadiene styrene (ABS) and poly-lactic acid (PLA) may present a risk of exposure to respirable particles. Mean PNC emitted in 3D printing tests ranged over several orders of magnitude across publications with overall means of 300,980â¯particles/cm3 for ABS and 65,482â¯particles/cm3 for PLA. Although mean PNC data were available from only 7 of the 16 papers reviewed, ABS resulted in greater particle numbers than PLA suggesting increased exposure to ultrafine particles. A linear mixed model was fitted for mean PNCs to further explore the impact of nozzle temperature and filament material. Finally, the PNER calculation method especially regarding losses, varied widely across studies, and directly impacted the PNERs reported. To strengthen direct comparability of results going forward, it is recommended that standard emissions testing protocols be developed for FDM 3D printers and particle influxes and losses be more uniformly calculated.