RESUMO
Herein we present a new strategy for the oxidative synthesis of formamides from various types of amines and bioderived formyl sources (DHA, GLA and GLCA) and molecular oxygen (O2) as oxidant on g-C3N4 supported Cu catalysts. Combined characterization data from EPR, XAFS, XRD and XPS revealed the formation of single CuN4 sites on supported Cuphen/C3N4 catalysts. EPR spin trapping experiments disclosed â OOH radicals as reactive oxygen species and â NR1R2 radicals being responsible for the initial C-C bond cleavage. Control experiments and DFT calculations showed that the successive C-C bond cleavage in DHA proceeds via a reaction mechanism co-mediated by â NR1R2 and â OOH radicals based on the well-equilibrated CuII and CuI cycle. Our catalyst has much higher activity (TOF) than those based on noble metals.
RESUMO
Heterogeneously catalyzed N-formylation of amines to formamide with CO2 /H2 is highly attractive for the valorization of CO2 . However, the relationship of the catalytic performance with the catalyst structure is still elusive. Herein, mixed valence catalysts containing Cu2 O/Cu interface sites were constructed for this transformation. Both aliphatic primary and secondary amines with diverse structures were efficiently converted into the desired formamides with good to excellent yields. Combined ex and in situ catalyst characterization revealed that the presence of Cu2 O/Cu interface sites was vital for the excellent catalytic activity. Density functional theory (DFT) calculations demonstrated that better catalytic activity of Cu2 O/Cu(111) than Cu(111) is attributed to the assistance of oxygen at the Cu2 O/Cu interface (Ointer ) in formation of Ointer -H moieties, which not only reduce the apparent barrier of HCOOH formation but also benefit the desorption of the desired N-formylated amine, leading to high activity and selectivity.
RESUMO
Elucidating the reaction mechanism in heterogeneous catalysis is critically important for catalyst development, yet remains challenging because of the often unclear nature of the active sites. Using a molecularly defined copper single-atom catalyst supported by a UiO-66 metal-organic framework (Cu/UiO-66) allows a detailed mechanistic elucidation of the CO oxidation reaction. Based on a combination of in situ/operando spectroscopies, kinetic measurements including kinetic isotope effects, and density-functional-theory-based calculations, we identified the active site, reaction intermediates, and transition states of the dominant reaction cycle as well as the changes in oxidation/spin state during reaction. The reaction involves the continuous reactive dissociation of adsorbed O2 , by reaction of O2,ad with COad , leading to the formation of an O atom connecting the Cu center with a neighboring Zr4+ ion as the rate limiting step. This is removed in a second activated step.
RESUMO
The simultaneous control of the defect species and surface properties of semiconducting materials is a crucial aspect of improving photocatalytic performance, yet it remains challenging. Here, we synthesized Mg-Zr-codoped single-crystalline Ta3N5 (Ta3N5:Mg+Zr) nanoparticles by a brief NH3 nitridation process, exhibiting photocatalytic water reduction activity 45 times greater than that of pristine Ta3N5 under visible light. A coherent picture of the relations between the defect species (comprising reduced Ta, nitrogen vacancies and oxygen impurities), surface properties (associated with dispersion of the Pt cocatalyst), charge carrier dynamics, and photocatalytic activities was drawn. The tuning of defects and simultaneous optimization of surface properties resulting from the codoping evidently resulted in the generation of high concentrations of long-lived electrons in this material as well as the efficient migration of these electrons to evenly distributed surface Pt sites. These effects greatly enhanced the photocatalytic activity. This work highlights the importance and feasibility of improving multiple properties of a catalytic material via a one-step strategy.
RESUMO
Photocatalytic ozonation (light/O3/photocatalyst), an independent advanced oxidation process (AOP) proposed in 1996, has demonstrated over the past two decades its robust oxidation capacity and potential for practical wastewater treatment using sunlight and air (source of ozone). However, its development is restricted by two main issues: (i) a lack of breakthrough catalysts working under visible light (42-43% of sunlight in energy) as well as ambiguous property-activity relationships and (ii) unclear fundamental reasons underlying its high yield of hydroxyl radicals (â¢OH). In this Account, we summarize our substantial contributions to solving these issues, including (i) new-generation graphitic carbon nitride (g-C3N4) catalysts with excellent performance for photocatalytic ozonation under visible light, (ii) mechanisms of charge carrier transfer and reactive oxygen species (ROS) evolution, (iii) property-activity relationships, and (iv) chemical and working stabilities of g-C3N4 catalysts. On this basis, the principles/directions for future catalyst design/optimization are discussed, and a new concept of integrating solar photocatalytic ozonation with catalytic ozonation in one plant for continuous treatment of wastewater regardless of sunlight availability is proposed.The story starts from our finding that bulk/nanosheet/nanoporous g-C3N4 triggers a strong synergy between visible light (vis) and ozone, causing efficient mineralization of a wide variety of organic pollutants. Taking bulk g-C3N4 as an example, photocatalytic ozonation (vis/O3/g-C3N4) causes the mineralization of oxalic acid (a model pollutant) at a rate 95.8 times higher than the sum of photocatalytic oxidation (vis/O2/g-C3N4) and ozonation. To unravel this synergism, we developed a method based on in situ electron paramagnetic resonance (EPR) spectroscopy coupled with an online spin trapping technique for monitoring under realistic aqueous conditions the generation and transfer of photoinduced charge carriers and their reaction with dissolved O3/O2 to form ROS. The presence of only 2.1 mol % O3 in the inlet O2 gas stream can trap 1-2 times more conduction band electrons than pure O2 and shifts the reaction pathway from inefficient three-electron reduction of O2 (O2 â â¢O2- â HO2⢠â H2O2 â â¢OH) to more efficient one-electron reduction of O3 (O3 â â¢O3- â HO3⢠â â¢OH), thereby increasing the yield of â¢OH by a factor of 17. Next, we confirmed band structure as a decisive factor for catalytic performance and established a new concept for resolving this relationship, involving "the number of reactive charge carriers". An optimum balance between the number and reducing ability of photoinduced electrons, which depends on the interplay between the band gap and the conduction band edge potential, is a key property for highly active g-C3N4 catalysts. Furthermore, we demonstrated that g-C3N4 is chemically stable toward O3 and â¢O2- but that â¢OH can tear and oxidize its heptazine units to form cyameluric acid and further release nitrates into the aqueous environment. Fortunately, â¢OH usually attacks organic pollutants in wastewater in preference to g-C3N4, thus preserving the working stability of g-C3N4 and the steady operation of photocatalytic ozonation. This AOP, which serves as an in situ â¢OH manufacturer, would be of interest to a broad chemistry world since â¢OH radicals are active species not only for environmental applications but also for organic synthesis, polymerization, zeolite synthesis, and protein footprinting.
RESUMO
The shift from fossil carbon sources to renewable ones is vital for developing sustainable chemical processes to produce valuable chemicals. In this work, value-added formamides were synthesized in good yields by the reaction of amines with C2 and C3 biomass-based platform molecules such as glycolic acid, 1,3-dihydroxyacetone and glyceraldehyde. These feedstocks were selectively converted by catalysts based on Cu-containing zeolite 5A through the inâ situ formation of carbonyl-containing intermediates. To the best of our knowledge, this is the first example in which all the carbon atoms in biomass-based feedstocks could be amidated to produce formamide. Combined catalyst characterization results revealed preferably single CuII sites on the surface of Cu/5A, some of which form small clusters, but without direct linking via oxygen bridges. By combining the results of electron paramagnetic resonance (EPR) spin-trapping, operando attenuated total reflection (ATR) IR spectroscopy and control experiments, it was found that the formation of formamides might involve a HCOOH-like intermediate and . NHPh radicals, in which the selective formation of . OOH radicals might play a key role.
RESUMO
The palladium-catalyzed oxidative carbonylation of amines toward the synthesis of oxalamides has been established around 30â years ago and it usually needs the presence of (over)stoichiometric amounts of oxidant. In this work, the first transformation of this type in which the oxidant was replaced by visible light is described. The new approach uses a simple robust Pd complex, which can even be partially recycled. A mechanistic reason is provided and supported by control experiments and EPR studies, showing that PdI was formed and Pd0 was the active species. Both nitrogen- and the intermediate acyl radical can be detected. Moreover, the formation of hydrogen was confirmed by gas GC.
RESUMO
Operando EPR, XANES/EXAFS, UV-Vis and ATR-IR spectroscopic methods have been coupled for the first time in the same experimental setup for investigation of unclear mechanistic aspects of selective aerobic oxidation of benzyl alcohol by a Cu/TEMPO catalytic system (TEMPO=2,2,6,6-tetramethylpiperidinyloxyl). By multivariate curve resolution with alternating least-squares fitting (MCR-ALS) of simultaneously recorded XAS and UV-Vis data sets, it was found that an initially formed (bpy)(NMI)CuI - complex (bpy=2,2'-bipyridine, NMI=N-methylimidazole ) is converted to two different CuII species, a mononuclear (bpy)(NMI)(CH3 CN)CuII -OOH species detectable by EPR and ESI-MS, and an EPR-silent dinuclear (CH3 CN)(bpy)(NMI)CuII (µ-OH)2 â CuII (bpy)(NMI) complex. The latter is cleaved in the further course of reaction into (bpy)(NMI)(HOO)CuII -TEMPO monomers that are also EPR-silent due to dipolar interaction with bound TEMPO. Both Cu monomers and the Cu dimer are catalytically active in the initial phase of the reaction, yet the dimer is definitely not a major active species nor a resting state since it is irreversibly cleaved in the course of the reaction while catalytic activity is maintained. Gradual formation of non-reducible CuII leads to slight deactivation at extended reaction times.
RESUMO
The impact of formaldehyde (HCHO, formed in vehicle exhaust gases by incomplete combustion of fuel) on the performance of a commercial V2O5-WO3/TiO2 catalyst in NH3-SCR of NOx under dry conditions has been analyzed in detail by catalytic tests, in situ FTIR and transient studies using temporal analysis of products (TAP). HCHO reacts preferentially with NH3 to a formamide (HCONH2) surface intermediate. This deprives NH3 partly from its desired role as a reducing agent in the SCR and diminishes NO conversion and N2 selectivity. Between 250 and 400 °C, HCONH2 decomposes by dehydration (major pathway) and decarbonylation (minor pathway) to liberate toxic HCN and CO, respectively. HCN was proven to be oxidized by lattice oxygen of the catalyst to CO2 and NO, which enters the NH3-SCR reaction.
Assuntos
Amônia , Titânio , Catálise , FormaldeídoRESUMO
Metal-organic framework (MOF)-derived Co-N-C catalysts with isolated single cobalt atoms have been synthesized and compared with cobalt nanoparticles for formic acid dehydrogenation. The atomically dispersed Co-N-C catalyst achieves superior activity, better acid resistance, and improved long-term stability compared with nanoparticles synthesized by a similar route. High-angle annular dark-field-scanning transmission electron microscopy, X-ray photoelectron spectroscopy, electron paramagnetic resonance, and X-ray absorption fine structure characterizations reveal the formation of CoII Nx centers as active sites. The optimal low-cost catalyst is a promising candidate for liquid H2 generation.
RESUMO
Photocatalytic pathways could prove crucial to the sustainable production of fuels and chemicals required for a carbon-neutral society. Electron-hole recombination is a critical problem that has, so far, limited the efficiency of the most promising photocatalytic materials. Here, we show the efficacy of anisotropy in improving charge separation and thereby boosting the activity of a titania (TiO2) photocatalytic system. Specifically, we show that H2 production in uniform, one-dimensional brookite titania nanorods is highly enhanced by engineering their length. By using complimentary characterization techniques to separately probe excited electrons and holes, we link the high observed reaction rates to the anisotropic structure, which favors efficient carrier utilization. Quantum yield values for hydrogen production from ethanol, glycerol, and glucose as high as 65%, 35%, and 6%, respectively, demonstrate the promise and generality of this approach for improving the photoactivity of semiconducting nanostructures for a wide range of reacting systems.
RESUMO
Glycolic acid (GA), as important building block of biodegradable polymers, has been synthesized for the first time in excellent yields at room temperature by selective oxidation of 1,3-dihyroxyacetone (DHA) using a cheap supported Cu/Al2 O3 catalyst with single active CuII species. By combining EPR spin-trapping and operando ATR-IR experiments, different mechanisms for the co-synthesis of GA, formates, and formamides have been derived, in which . OH radicals formed from H2 O2 by a Fenton-like reaction play a key role.
RESUMO
The selective cleavage of thermodynamically stable C(sp3 )-C(sp3 ) single bonds is rare compared to their ubiquitous formation. Herein, we describe a general methodology for such transformations using homogeneous copper-based catalysts in the presence of air. The utility of this novel methodology is demonstrated for Cα -Cß bond scission in >70 amines with excellent functional group tolerance. This transformation establishes tertiary amines as a general synthon for amides and provides valuable possibilities for their scalable functionalization in, for example, natural products and bioactive molecules.
RESUMO
This work reports the synthesis of heterostructured copper-ceria and iron-ceria nanorods and the role of their morphology, redox, and acid properties in catalytic diesel soot combustion. Microscopy images show the presence of nanocrystalline CuO (9.5 ± 0.5 nm) and Fe2O3 (7.3 ± 0.5 nm) particles on the surface of CeO2 nanorods (diameter is 8.5 ± 2 nm and length within 16-89 nm). In addition to diffraction peaks of CuO and Fe2O3 nanocrystallites, X-ray diffraction (XRD) studies reveal doping of Cu2+ and Fe3+ ions into the fluorite lattice of CeO2, hence abundant oxygen vacancies in the Cu/CeO2 and Fe/CeO2 nanorods, as evidenced by Raman spectroscopy studies. XRD and Raman spectroscopy studies further show substantial perturbations in Cu/CeO2 rods, resulting in an improved reducibility of bulk cerium oxide and formation of abundant Lewis acid sites, as investigated by H2-temperature-programmed reduction and pyridine-adsorbed Fourier transform infrared studies, respectively. The Cu/CeO2 rods catalyze the soot oxidation reaction at the lowest temperatures under both tight contact (Cu/CeO2; T50 = 358 °C, temperature at which 50% soot conversion is achieved, followed by Fe/CeO2; T50 = 368 °C and CeO2; T50 = 433 °C) and loose contact conditions (Cu/CeO2; T50 = 419 °C and Fe/CeO2; T50 = 435 °C). A possible mechanism based on the synergetic effect of redox and acid properties of Cu/CeO2 nanorods was proposed: acid sites can activate soot particles to form reactive carbon species, which are oxidized by gaseous oxygen/lattice oxygen activated in the oxygen vacancies (redox sites) of ceria rods.
RESUMO
Selective aerobic oxidation of benzyl alcohol to benzaldehyde by a (bpy)CuI(IM)/TEMPO catalyst (IM represents differently substituted imidazoles) has been studied by simultaneous operando electron paramagnetic resonance/UV-vis/attentuated total reflectance infrared spectroscopy in combination with cyclic voltammetry to explore the particular role of imidazole in terms of ligand and/or base as well as of its substitution pattern on the catalytic performance. For molar ratios of IM/Cu ≥ 2, a (bpy)CuI/II(IM)a(IM)b complex is formed, in which the Cu-N distances and/or angles for the two IM ligands a and b are different. The coordination of a second IM molecule boosts the oxidation of CuI to CuII and, thus, helps to activate O2 by electron transfer from CuI to O2. The rates of CuI oxidation and CuII reduction and, thus, the rates of benzaldehyde formation depend on R of the R-N moiety in the IM ligand. Oxidation is fastest for R = H and alkyl, while reduction is slowest for R = H. The CuI/CuII interplay leads to decreasing total benzaldehyde formation rates in the order R (I+ effect) > R (conjugated system) > R = H.
RESUMO
The CF3 group is an omnipresent motif found in many pharmaceuticals, agrochemicals, catalysts, materials, and industrial chemicals. Despite well-established trifluoromethylation methodologies, the straightforward and selective introduction of such groups into (hetero)arenes using available and less expensive sources is still a major challenge. In this regard, the selective synthesis of various trifluoromethyl-substituted (hetero)arenes by palladium-catalyzed C-H functionalization is herein reported. This novel methodology proceeds under comparably mild reaction conditions with good regio- and chemoselectivity. As examples, trifluoromethylations of biologically important molecules, such as melatonin, theophylline, caffeine, and pentoxifylline, are showcased.
RESUMO
A series of ansa-titanocene triflate complexes are described as model compounds for the elementary steps of light-driven overall water splitting. Titanocene(III) triflate complexes are readily obtained by reaction of a titanocene source with Yb(OTf)3. Subsequent reactions with water and with/without TEMPO as hydrogen scavenger are studied. The as-obtained titanocene(IV) compounds can be photoreduced to give titanocene(III) triflate complexes, which can undergo further hydrolysis to form a closed catalytic cycle of water splitting. No further degradation of the photoreduced species was observed because of the presence of the OTf group. The stability of the system was evaluated in an experiment with high concentrations of water and TEMPO. X-ray crystallography on all titanocene complexes, EPR and NMR spectroscopy, and DFT were used to support our observations.
RESUMO
Co-components are a powerful tool to tune the performance of catalysts, but their nature and their impact on the catalysts is often controversially discussed. In this study X-ray absorption spectroscopy (XAS) was employed to elucidate the nature of co-components and their impact on the catalytic reaction. In anatase-supported Pd-based catalysts for the gas-phase acetoxylation of toluene, less noble co-components (e.g., Mn, Co, and Sb) spread over the support in their oxidic form and changed their valence state on stream. Incorporated atoms such as C or a small part of the Sb affect the electronic structure of Pd. For the noble Au, only a weak interaction with the support and Pd was observed during time on stream. Only XAS at the K-edges together with investigations of the Pd L-edge for a better understanding of the electronic structure, supplemented by STEM for elemental mapping, allow such detailed insights.
RESUMO
The first coupled operando EPR/UV-Vis/ATR-IR spectroscopy setup for mechanistic studies of gas-liquid phase reactions is presented and exemplarily applied to the well-known copper/TEMPO-catalyzed (TEMPO=(2,2,6,6-tetramethylpiperidin-1-yl)oxyl) oxidation of benzyl alcohol. In contrast to previous proposals, no direct redox reaction between TEMPO and Cu(I) /Cu(II) has been detected. Instead, the role of TEMPO is postulated to be the stabilization of a (bpy)(NMI)Cu(II) -O2 (â -) -TEMPO (bpy=2,2'-bipyridine, NMI=N-methylimidazole) intermediate formed by electron transfer from Cu(I) to molecular O2 .
RESUMO
Singlet cyclo-1,3-dipnicta-2,4-diazane-1,3-diyls of the type [E(µ-NTer)2 E] (2, E=P, As, Ter=2,6-dimesitylphenyl) can undergo a one-electron-oxidation utilizing silver salts of weakly coordinating anions such as [AgLn][B(C6F5)4 ] (L=donor solvents) to afford the novel cyclic radical cations, [E(µ-NTer)2E](+·) (3(+·)). When smaller and more basic anions were employed in the reaction, the anions were found to form covalent bonds to the radical centers yielding dipnictadiazanes, [FP(µ-NTer)2PF] (5) and [(CF3CO2)P(µ-NTer)2P(CF3CO2)] (6). A two-electron oxidation process, resulting in the formation of dications of the type [E(µ-NTer)2E](2+), could not be observed. Computational and EPR data revealed that the spin density is almost completely localized at the two heavier pnictogen centers E of the former 1,3-dipnictadiazane-1,3-diyls. The bonding situation in the radical cations features a rare example of a transannular one-electron π bond without having a σ bond.