Ceramide as an endothelial cell surface receptor and a lung-specific lipid vascular target for circulating ligands.

The vascular endothelium from individual organs is functionally specialized, and it displays a unique set of accessible molecular targets. These serve as endothelial cell receptors to affinity ligands. To date, all identified vascular receptors have been proteins. Here, we show that an endothelial lung-homing peptide (CGSPGWVRC) interacts with C16-ceramide, a bioactive sphingolipid that mediates several biological functions. Upon binding to cell surfaces, CGSPGWVRC triggers ceramide-rich platform formation, activates acid sphingomyelinase and ceramide production, without the associated downstream apoptotic signaling. We also show that the lung selectivity of CGSPGWVRC homing peptide is dependent on ceramide production in vivo. Finally, we demonstrate two potential applications for this lipid vascular targeting system: i) as a bioinorganic hydrogel for pulmonary imaging and ii) as a ligand-directed lung immunization tool against COVID-19. Thus, C16-ceramide is a unique example of a lipid-based receptor system in the lung vascular endothelium targeted in vivo by circulating ligands such as CGSPGWVRC.

Dimensional Reduction of Metal-Organic Frameworks for Enhanced Cryopreservation of Red Blood Cells.

To increase the red blood cell (RBC) cryopreservation efficiency by metal-organic frameworks (MOFs), a dimensional reduction approach has been proposed. Namely, 3D MOF nanoparticles are progressively reduced to 2D ultra-thin metal-organic layers (MOLs). We found that 2D MOLs are beneficial for enhanced interactions of the interfacial hydrogen-bonded water network and increased utilization of inner ordered structures, due to the higher surface-to-volume ratio. Specifically, a series of hafnium (Hf)-based 2D MOLs with different thicknesses (monolayer to stacked multilayers) and densities of hydrogen bonding sites have been synthesized. Both ice recrystallization inhibition activity (IRI) and RBCs cryopreservation assay confirm the pronounced better IRI activity and excellent cell recovery efficiency (up to ≈63 % at a very low concentration of 0.7 mg mL-1 ) of thin-layered Hf-MOLs compared to their 3D counterparts, thereby verifying the dimensional reduction strategy to improved cryoprotectant behaviors.

Bioinspired Cell Silicification: From Extracellular to Intracellular.

In nature, biosilicification directs the formation of elaborate amorphous silica exoskeletons that provide diatoms mechanically strong, chemically inert, non-decomposable silica armor conferring chemical and thermal stability as well as resistance to microbial attack, without changing the optical transparency or adversely effecting nutrient and waste exchange required for growth. These extraordinary silica/cell biocomposites have inspired decades of biomimetic research aimed at replication of diatoms' hierarchically organized exoskeletons, immobilization of cells or living organisms within silica matrices and coatings to protect them against harmful external stresses, genetic re-programming of cellular functions by virtue of physico-chemical confinement within silica, cellular integration into devices, and endowment of cells with non-native, abiotic properties through facile silica functionalization. In this Perspective, we focus our discussions on the development and concomitant challenges of bioinspired cell silicification ranging from "cells encapsulated within 3D silica matrices" and "cells encapsulated within 2D silica shells" to extra- and intracellular silica replication, wherein all biomolecular interfaces are encased within nanoscopic layers of amorphous silica. We highlight notable examples of advances in the science and technology of biosilicification and consider challenges to advancing the field, where we propose cellular "mineralization" with arbitrary nanoparticle exoskeletons as a generalizable means to impart limitless abiotic properties and functions to cells, and, based on the interchangeability of water and silicic acid and analogies between amorphous ice and amorphous silica, we consider "freezing" cells within amorphous silica as an alternative to cryo-preservation.

Uptake and Toxicity of Respirable Carbon-Rich Uranium-Bearing Particles: Insights into the Role of Particulates in Uranium Toxicity.

Particulate matter (PM) presents an environmental health risk for communities residing close to uranium (U) mine sites. However, the role of the particulate form of U on its cellular toxicity is still poorly understood. Here, we investigated the cellular uptake and toxicity of C-rich U-bearing particles as a model organic particulate containing uranyl citrate over a range of environmentally relevant concentrations of U (0-445 µM). The cytotoxicity of C-rich U-bearing particles in human epithelial cells (A549) was U-dose-dependent. No cytotoxic effects were detected with soluble U doses. Carbon-rich U-bearing particles with a wide size distribution (<10 µm) presented 2.7 times higher U uptake into cells than the particles with a narrow size distribution (<1 µm) at 100 µM U concentration. TEM-EDS analysis identified the intracellular translocation of clusters of C-rich U-bearing particles. The accumulation of C-rich U-bearing particles induced DNA damage and cytotoxicity as indicated by the increased phosphorylation of the histone H2AX and cell death, respectively. These findings reveal the toxicity of the particulate form of U under environmentally relevant heterogeneous size distributions. Our study opens new avenues for future investigations on the health impacts resulting from environmental exposures to the particulate form of U near mine sites.

Conversion of Metal-Organic Cage to Ligand-Free Ultrasmall Noble Metal Nanocluster Catalysts Confined within Mesoporous Silica Nanoparticle Supports.

Supported ultrasmall noble metal nanocluster-based (UNMN-based) catalysts are one of the most important classes of solid materials for heterogeneous catalysis. In this work, we present a novel strategy for the controlled synthesis of ligand-free UNMN nanocatalysts based on in situ reduction of a palladium-based (Pd-based) metal-organic cage (MOC) confined within monosized, thiol-modified mesoporous silica nanoparticle (MSN) supports. By taking advantage of the high mutual solubility of MOCs and MSNs in DMSO and the strong interactions between the thiol-modified MSN pore wall and MOC surface, a good dispersion of MOC molecules was achieved throughout the MSN support. The close correspondence of the MSN pore diameter (ca. 5.0 nm) with the diameter of the MOC (ca. 4.0 nm) confines MOC packing to approximately a monolayer. Based on this spatial constraint and electrostatic binding of the MOC to the thiol-modified MSN pore surface, in situ MOC reduction followed by metal atom diffusion, coalescence, and anchoring on the active sites resulted in ligand-free Pd-based UNMNs of approximately 0.9 ± 0.2 nm in diameter decorating the MSN pore surfaces. Control experiments of the reduction of a conventional palladium source or the reduction of free, unconstrained cages in solution under the same conditions only produced large metal nanocrystals (NP, >2 nm), confirming the importance of confined reduction to achieve a highly catalytically active surface. In light of this strategy, two catalytic experiments including the reaction of 4-nitrophenol to 4-aminophenol and the Suzuki C-C coupling reaction show superior catalytic activity of the engineered MSN-supported UNMN nanocatalysts compared to their free form and state of the art commercial catalysts. We believe that our new strategy will open new avenues for artificially designed UNMN-inspired nanoarchitectures for wide applications.

Metal-Organic Framework Nanoparticle-Assisted Cryopreservation of Red Blood Cells.

The development of hybrid nanomaterials mimicking antifreeze proteins that can modulate/inhibit the growth of ice crystals for cell/tissue cryopreservation has attracted increasing interests. Herein, we describe the first utilization of zirconium (Zr)-based metal-organic framework (MOF) nanoparticles (NPs) with well-defined surface chemistries for the cryopreservation of red blood cells (RBCs) without the need of any (toxic) organic solvents. Distinguishing features of this cryoprotective approach include the exceptional water stability, low hemolytic activity, and the long periodic arrangement of organic linkers on the surface of MOF NPs, which provide a precise spacing of hydrogen donors to recognize and match the ice crystal planes. Five kinds of Zr-based MOF NPs, with different pore size, surface chemistry, and framework topologies, were used for the cryoprotection of RBCs. A "splat" assay confirmed that MOF NPs not only exhibited ice recrystallization inhibition activities but also acted as a "catalyst" to accelerate the melting of ice crystals. The human RBC cryopreservation tests displayed RBC recoveries of up to ∼40%, which is higher than that obtained via commonly used hydroxyethyl starch polymers. This cryopreservation approach will inspire the design and utilization of MOF-derived nanoarchitectures for the effective cryopreservation of various cell types as well as tissue samples.

Mathematical modeling in cancer nanomedicine: a review.

Cancer continues to be among the leading healthcare problems worldwide, and efforts continue not just to find better drugs, but also better drug delivery methods. The need for delivering cytotoxic agents selectively to cancerous cells, for improved safety and efficacy, has triggered the application of nanotechnology in medicine. This effort has provided drug delivery systems that can potentially revolutionize cancer treatment. Nanocarriers, due to their capacity for targeted drug delivery, can shift the balance of cytotoxicity from healthy to cancerous cells. The field of cancer nanomedicine has made significant progress, but challenges remain that impede its clinical translation. Several biophysical barriers to the transport of nanocarriers to the tumor exist, and a much deeper understanding of nano-bio interactions is necessary to change the status quo. Mathematical modeling has been instrumental in improving our understanding of the physicochemical and physiological underpinnings of nanomaterial behavior in biological systems. Here, we present a comprehensive review of literature on mathematical modeling works that have been and are being employed towards a better understanding of nano-bio interactions for improved tumor delivery efficacy.

Integrated nanotechnology platform for tumor-targeted multimodal imaging and therapeutic cargo release.

A major challenge of targeted molecular imaging and drug delivery in cancer is establishing a functional combination of ligand-directed cargo with a triggered release system. Here we develop a hydrogel-based nanotechnology platform that integrates tumor targeting, photon-to-heat conversion, and triggered drug delivery within a single nanostructure to enable multimodal imaging and controlled release of therapeutic cargo. In proof-of-concept experiments, we show a broad range of ligand peptide-based applications with phage particles, heat-sensitive liposomes, or mesoporous silica nanoparticles that self-assemble into a hydrogel for tumor-targeted drug delivery. Because nanoparticles pack densely within the nanocarrier, their surface plasmon resonance shifts to near-infrared, thereby enabling a laser-mediated photothermal mechanism of cargo release. We demonstrate both noninvasive imaging and targeted drug delivery in preclinical mouse models of breast and prostate cancer. Finally, we applied mathematical modeling to predict and confirm tumor targeting and drug delivery. These results are meaningful steps toward the design and initial translation of an enabling nanotechnology platform with potential for broad clinical applications.

Uptake and intracellular fate of cholera toxin subunit b-modified mesoporous silica nanoparticle-supported lipid bilayers (aka protocells) in motoneurons.

Cholera toxin B (CTB) modified mesoporous silica nanoparticle supported lipid bilayers (CTB-protocells) are a promising, customizable approach for targeting therapeutic cargo to motoneurons. In the present study, the endocytic mechanism and intracellular fate of CTB-protocells in motoneurons were examined to provide information for the development of therapeutic application and cargo delivery. Pharmacological inhibitors elucidated CTB-protocells endocytosis to be dependent on the integrity of lipid rafts and macropinocytosis. Using immunofluorescence techniques, live confocal and transmission electron microscopy, CTB-protocells were primarily found in the cytosol, membrane lipid domains and Golgi. There was no difference in the amount of motoneuron activity dependent uptake of CTB-protocells in neuromuscular junctions, consistent with clathrin activation at the axon terminals during low frequency activity. In conclusion, CTB-protocells uptake is mediated principally by lipid rafts and macropinocytosis. Once internalized, CTB-protocells escape lysosomal degradation, and engage biological pathways that are not readily accessible by untargeted delivery methods.

Protocells: Modular Mesoporous Silica Nanoparticle-Supported Lipid Bilayers for Drug Delivery.

Mesoporous silica nanoparticle-supported lipid bilayers, termed 'protocells,' represent a potentially transformative class of therapeutic and theranostic delivery vehicle. The field of targeted drug delivery poses considerable challenges that cannot be addressed with a single 'magic bullet'. Consequently, the protocell has been designed as a modular platform composed of interchangeable biocompatible components. The mesoporous silica core has variable size and shape to direct biodistribution and a controlled pore size and surface chemistry to accommodate diverse cargo. The encapsulating supported lipid bilayer can be modified with targeting and trafficking ligands as well as polyethylene glycol (PEG) to effect selective binding, endosomal escape of cargo, drug efflux prevention, and potent therapeutic delivery, while maintaining in vivo colloidal stability. This review describes the individual components of the platform, including the mesoporous silica nanoparticle core and supported lipid bilayer, their assembly (by multiple techniques) into a protocell, and the combined, often synergistic, performance of the protocell based on in vitro and in vivo studies, including the assessment of biocompatibility and toxicity. In closing, the many emerging variations of the protocell theme and the future directions for protocell research are commented on.

Controlling the metal to semiconductor transition of MoS2 and WS2 in solution.

Lithiation-exfoliation produces single to few-layered MoS2 and WS2 sheets dispersible in water. However, the process transforms them from the pristine semiconducting 2H phase to a distorted metallic phase. Recovery of the semiconducting properties typically involves heating of the chemically exfoliated sheets at elevated temperatures. Therefore, it has been largely limited to sheets deposited on solid substrates. Here, we report the dispersion of chemically exfoliated MoS2 sheets in high boiling point organic solvents enabled by surface functionalization and the controllable recovery of their semiconducting properties directly in solution. This process connects the scalability of chemical exfoliation with the simplicity of solution processing, ultimately enabling a facile method for tuning the metal to semiconductor transitions of MoS2 and WS2 within a liquid medium.

Cellular complexity captured in durable silica biocomposites.

Tissue-derived cultured cells exhibit a remarkable range of morphological features in vitro, depending on phenotypic expression and environmental interactions. Translation of these cellular architectures into inorganic materials would provide routes to generate hierarchical nanomaterials with stabilized structures and functions. Here, we describe the fabrication of cell/silica composites (CSCs) and their conversion to silica replicas using mammalian cells as scaffolds to direct complex structure formation. Under mildly acidic solution conditions, silica deposition is restricted to the molecularly crowded cellular template. Inter- and intracellular heterogeneity from the nano- to macroscale is captured and dimensionally preserved in CSCs following drying and subjection to extreme temperatures allowing, for instance, size and shape preserving pyrolysis of cellular architectures to form conductive carbon replicas. The structural and behavioral malleability of the starting material (cultured cells) provides opportunities to develop robust and economical biocomposites with programmed structures and functions.

Porous ice phases with VI and distorted VII structures constrained in nanoporous silica.

High-pressure compression of water contained in nanoporous silica allowed fabrication of novel porous ice phases as a function of pressure. The starting liquid nanoporous H2O transformed to ice VI and VII at 1.7 and 2.5 GPa, respectively, which are 0.6 and 0.4 GPa higher than commonly accepted pressures for bulk H2O. The continuous increase of pressure drives the formation of a tetragonally distorted VII structure with the space group I4mm, rather than a cubic Pn3m phase in bulk ice. The enhanced incompressibility of the tetragonal ice is related to the unique nanoporous configuration, and the distortion ratio c/a gradually increases with increasing pressure. The structural changes and enhanced thermodynamic stability may be interpreted by the two-dimensional distribution of silanol groups on the porous silica surfaces and the associated anisotropic interactions with H2O at the interfaces.

Atomic layer deposition of L-alanine polypeptide.

L-Alanine polypeptide thin films were synthesized via atomic layer deposition (ALD). Instead of using an amino acid monomer as the precursor, an L-alanine amino acid derivatized with a protecting group was used to prevent self-polymerization, increase the vapor pressure, and allow linear cycle-by-cycle growth emblematic of ALD. The successful deposition of a conformal polypeptide film has been confirmed by FTIR, TEM, and Mass Spectrometry, and the ALD process has been extended to polyvaline.

Mesoporous silica nanoparticle nanocarriers: biofunctionality and biocompatibility.

The study of ordered mesoporous silica materials has exploded since their discovery by Mobil researchers 20 years ago. The ability to make uniformly sized, porous, and dispersible nanoparticles using colloidal chemistry and evaporation-induced self-assembly has led to many applications of mesoporous silica nanoparticles (MSNPs) as "nanocarriers" for delivery of drugs and other cargos to cells. The exceptionally high surface area of MSNPs, often exceeding 1000 m²/g, and the ability to independently modify pore size and surface chemistry, enables the loading of diverse cargos and cargo combinations at levels exceeding those of other common drug delivery carriers such as liposomes or polymer conjugates. This is because noncovalent electrostatic, hydrogen-bonding, and van der Waals interactions of the cargo with the MSNP internal surface cause preferential adsorption of cargo to the MSNP, allowing loading capacities to surpass the solubility limit of a solution or that achievable by osmotic gradient loading. The ability to independently modify the MSNP surface and interior makes possible engineered biofunctionality and biocompatibility. In this Account, we detail our recent efforts to develop MSNPs as biocompatible nanocarriers (Figure 1 ) that simultaneously display multiple functions including (1) high visibility/contrast in multiple imaging modalities, (2) dispersibility, (3) binding specificity to a particular target tissue or cell type, (4) ability to load and deliver large concentrations of diverse cargos, and (5) triggered or controlled release of cargo. Toward function 1, we chemically conjugated fluorescent dyes or incorporated magnetic nanoparticles to enable in vivo optical or magnetic resonance imaging. For function 2, we have made MSNPs with polymer coatings, charged groups, or supported lipid bilayers, which decrease aggregation and improve stability in saline solutions. For functions 3 and 4, we have enhanced passive bioaccumulation via the enhanced permeability and retention effect by modifying the MSNP surfaces with positively charged polymers. We have also chemically attached ligands to MSNPs that selectively bind to receptors overexpressed in cancer cells. We have used encapsulation of MSNPs within reconfigurable supported lipid bilayers to develop new classes of responsive nanocarriers that actively interact with the target cell. Toward function 4, we exploit the high surface area and tailorable surface chemistry of MSNPs to retain hydrophobic drugs. Finally, for function 5, we have engineered dynamic behaviors by incorporating molecular machines within or at the entrances of MSNP pores and by using ligands, polymers, or lipid bilayers. These provide a means to seal-in and retain cargo and to direct MSNP interactions with and internalization by target cells. Application of MSNPs as nanocarriers requires biocompatibility and low toxicity. Here the intrinsic porosity of the MSNP surface reduces the extent of hydrogen bonding or electrostatic interactions with cell membranes as does surface coating with polymers or lipid bilayers. Furthermore, the high surface area and low extent of condensation of the MSNP siloxane framework promote a high rate of dissolution into soluble silicic acid species, which are found to be nontoxic. Potential toxicity is further mitigated by the high drug capacity of MSNPs, which greatly reduces needed dosages compared with other nanocarriers. We anticipate that future generations of MSNPs incorporating molecular machines and encapsulated by membrane-like lipid bilayers will achieve a new level of controlled cellular interactions.

Revealing the interfacial self-assembly pathway of large-scale, highly-ordered, nanoparticle/polymer monolayer arrays at an air/water interface.

The pathway of interfacial self-assembly of large-scale, highly ordered 2D nanoparticle/polymer monolayer or bilayer arrays from a toluene solution at an air/water interface was investigated using grazing-incidence small-angle scattering at a synchrotron source. Interfacial-assembly of the ordered nanoparticle/polymer array was found to occur through two stages: formation of an incipient randomly close-packed interfacial monolayer followed by compression of the monolayer to form a close-packed lattice driven by solvent evaporation from the polymer. Because the nanoparticles are hydrophobic, they localize exclusively to the polymer-air interface during self-assembly, creating a through thickness asymmetric film as confirmed by X-ray reflectivity. The interfacial self-assembly approach can be extended to form binary NP/polymer arrays. It is anticipated that by understanding the interfacial self-assembly pathway, this simple evaporative procedure could be conducted as a continuous process amenable to large area nanoparticle-based manufacturing needed for emerging energy technologies.

Synthetic Biohybrids of Red Blood Cells and Cascaded-Enzymes@ Metal-Organic Frameworks for Hyperuricemia Treatment.

Hyperuricemia, caused by an imbalance between the rates of production and excretion of uric acid (UA), may greatly increase the mortality rates in patients with cardiovascular and cerebrovascular diseases. Herein, for fast-acting and long-lasting hyperuricemia treatment, armored red blood cell (RBC) biohybrids, integrated RBCs with proximal, cascaded-enzymes of urate oxidase (UOX) and catalase (CAT) encapsulated within ZIF-8 framework-based nanoparticles, have been fabricated based on a super-assembly approach. Each component is crucial for hyperuricemia treatment: 1) RBCs significantly increase the circulation time of nanoparticles; 2) ZIF-8 nanoparticles-based superstructure greatly enhances RBCs resistance against external stressors while preserving native RBC properties (such as oxygen carrying capability); 3) the ZIF-8 scaffold protects the encapsulated enzymes from enzymatic degradation; 4) no physical barrier exists for urate diffusion, and thus allow fast degradation of UA in blood and neutralizes the toxic by-product H2 O2 . In vivo results demonstrate that the biohybrids can effectively normalize the UA level of an acute hyperuricemia mouse model within 2 h and possess a longer elimination half-life (49.7 ± 4.9 h). They anticipate that their simple and general method that combines functional nanomaterials with living cell carriers will be a starting point for the development of innovative drug delivery systems.

Lithographically defined macroscale modulation of lateral fluidity and phase separation realized via patterned nanoporous silica-supported phospholipid bilayers.

Using lithographically defined surfaces consisting of hydrophilic patterns of nanoporous and nonporous (bulk) amorphous silica, we show that fusion of small, unilamellar lipid vesicles produces a single, contiguous, fluid bilayer phase experiencing a predetermined pattern of interfacial interactions. Although long-range lateral fluidity of the bilayer, characterized by fluorescence recovery after photobleaching, indicates a nominally single average diffusion constant, fluorescence microscopy-based measurements of temperature-dependent onset of fluidity reveals a locally enhanced fluidity for bilayer regions supported on nanoporous silica in the vicinity of the fluid-gel transition temperature. Furthermore, thermally quenching lipid bilayers composed of a binary lipid mixture below its apparent miscibility transition temperature induces qualitatively different lateral phase separation in each region of the supported bilayer: The nanoporous substrate produces large, microscopic domains (and domain-aggregates), whereas surface texture characterized by much smaller domains and devoid of any domain-aggregates appears on bulk glass-supported regions of the single-lipid bilayer. Interestingly, lateral distribution of the constituent molecules also reveals an enrichment of gel-phase lipids over nanoporous regions, presumably as a consequence of differential mobilities of constituent lipids across the topographic bulk/nanoporous boundary. Together, these results reveal that subtle local variations in constraints imposed at the bilayer interface, such as by spatial variations in roughness and substrate adhesion, can give rise to significant differences in macroscale biophysical properties of phospholipid bilayers even within a single, contiguous phase.

Re-examining the size/charge paradigm: differing in vivo characteristics of size- and charge-matched mesoporous silica nanoparticles.

The combination of nanoparticle (NP) size, charge, and surface chemistry (e.g., extent of modification with polyethylene glycol (PEG)) is accepted as a key determinant of NP/cellular interactions. However, the influence of spatial arrangement and accessibility of the charged molecules on the NP surface vis-à-vis the average surface charge (zeta (ζ) potential) is incompletely understood. Here we demonstrate that two types of mesoporous silica nanoparticles (MSNP) that are matched in terms of primary and hydrodynamic particle size, shape, pore structure, colloidal stability, and ζ potential, but differ in surface chemistry, viz. the spatial arrangement and relative exposure of surface amines, have profoundly different interactions with cells and tissues when evaluated in vitro and in vivo. While both particles are ∼50 nm in diameter, PEGylated, and positively charged (ζ = +40 mV), PEG-PEI (MSNPs modified with exposed polyamines), but not PEG-NMe3(+) (MSNP modified with distributed, obstructed amines) rapidly bind serum proteins, diverse cells types in vitro, and endothelial and white blood cells in vivo (ex ovo chick embryo model). This finding helps elucidate the relative role of surface exposure of charged molecules vs ζ potential in otherwise physicochemically matched MSNP and highlights protein corona neutrality as an important design consideration when synthesizing cationic NPs for biological applications.