Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 19 de 19
Filtrar
Mais filtros

Base de dados
Tipo de documento
Intervalo de ano de publicação
1.
Angew Chem Int Ed Engl ; 62(5): e202216349, 2023 Jan 26.
Artigo em Inglês | MEDLINE | ID: mdl-36450099

RESUMO

A novel series of heterometallic f-block-frameworks including the first examples of transuranic heterometallic 238 U/239 Pu-metal-organic frameworks (MOFs) and a novel monometallic 239 Pu-analog are reported. In combination with theoretical calculations, we probed the kinetics and thermodynamics of heterometallic actinide(An)-MOF formation and reported the first value of a U-to-Th transmetallation rate. We concluded that formation of uranyl species could be a driving force for solid-state metathesis. Density of states near the Fermi edge, enthalpy of formation, band gap, proton affinity, and thermal/chemical stability were probed as a function of metal ratios. Furthermore, we achieved 97 % of the theoretical maximum capacity for An-integration. These studies shed light on fundamental aspects of actinide chemistry and also foreshadow avenues for the development of emerging classes of An-containing materials, including radioisotope thermoelectric generators or metalloradiopharmaceuticals.

2.
J Am Chem Soc ; 141(29): 11628-11640, 2019 Jul 24.
Artigo em Inglês | MEDLINE | ID: mdl-31276404

RESUMO

Thermodynamic studies of actinide-containing metal-organic frameworks (An-MOFs), reported herein for the first time, are a step toward addressing challenges related to effective nuclear waste administration. In addition to An-MOF thermochemistry, enthalpies of formation were determined for the organic linkers, 2,2'-dimethylbiphenyl-4,4'-dicarboxylic acid (H2Me2BPDC) and biphenyl-4,4'-dicarboxylic acid (H2BPDC), which are commonly used building blocks for MOF preparation. The electronic structure of the first example of An-MOF with mixed-metal AnAn'-nodes was influenced through coordination of transition metals as shown by the density of states near the Fermi edge, changes in the Tauc plot, conductivity measurements, and theoretical calculations. The "structural memory" effect (i.e., solvent-directed crystalline-amorphous-crystalline structural dynamism) was demonstrated as a function of node coordination degree, which is the number of organic linkers per metal node. Remarkable three-month water stability was reported for Th-containing frameworks herein, and the mechanism is also considered for improvement of the behavior of a U-based framework in water. Mechanistic aspects of capping linker installation were highlighted through crystallographic characterization of the intermediate, and theoretical calculations of free energies of formation (ΔGf) for U- and Th-MOFs with 10- and 12-coordinated secondary building units (SBUs) were performed to elucidate experimentally observed transformations during the installation processes. Overall, these results are the first thermochemical, electronic, and mechanistic insights for a relatively young class of actinide-containing frameworks.

3.
Phys Chem Chem Phys ; 15(31): 13147-52, 2013 Aug 21.
Artigo em Inglês | MEDLINE | ID: mdl-23824146

RESUMO

Identification of the existence of pyrocarbonate ion C2O5(2-) in molten carbonates exposed to a CO2 atmosphere provides key support for a newly established bi-ionic transport model that explains the mechanisms of high CO2 permeation flux observed in mixed oxide-ion and carbonate-ion conducting (MOCC) membranes containing highly interconnected three dimensional ionic channels. Here we report the first Raman spectroscopic evidence of C2O5(2-) as an active species involved in the CO2-transport process of MOCC membranes exposed to a CO2 atmosphere. The two new broad peaks centered at 1317 cm(-1) and 1582 cm(-1) are identified as the characteristic frequencies of the C2O5(2-) species. The measured characteristic Raman frequencies of C2O5(2-) are in excellent agreement with the DFT-model consisting of six overlapping individual theoretical bands calculated from Li2C2O5 and Na2C2O5.


Assuntos
Dióxido de Carbono/química , Dietil Pirocarbonato/análogos & derivados , Dietil Pirocarbonato/química , Teoria Quântica , Análise Espectral Raman
4.
J Phys Chem B ; 127(27): 6091-6101, 2023 Jul 13.
Artigo em Inglês | MEDLINE | ID: mdl-37399503

RESUMO

Complementary X-ray absorption fine structure (XAFS) spectroscopy and Raman spectroscopy studies were conducted on several UCl3 concentrations in several chloride salt compositions. The samples were 5% UCl3 in LiCl (S1), 5% UCl3 in KCl (S2), 5% UCl3 in LiCl-KCl eutectic (S3), 5% UCl3 in LiCl-KCl eutectic (S4), 50% UCl3 in KCl (S5), and 20% UCl3 in KCl (S6) molar concentrations. Sample S3 had UCl3 sourced from Idaho National Laboratory (INL), and all other samples were UCl3 sourced from TerraPower. The initial compositions were prepared in an inert and oxygen-free atmosphere. XAFS measurements were performed in the atmosphere at a beamline, and Raman spectroscopy was conducted inside a glovebox. Raman spectra were able to confirm initial UCl3. XAFS and later Raman spectra measured, however, did not correctly match the literature and computational spectra for the prepared UCl3 salt. Rather, the data shows some complex uranium oxychloride phases at room temperature that transition into uranium oxides upon heating. Oxygen pollution due to failure of the sealing mechanism can result in oxidation of the UCl3 salts. The oxychlorides present may be both a function of the unknown O2 exposure concentration, depending on the source of the leak and the salt composition. Evidence of this oxychloride claim and its subsequent decomposition is justified in this work.

5.
J Phys Chem B ; 126(7): 1539-1550, 2022 Feb 24.
Artigo em Inglês | MEDLINE | ID: mdl-35138853

RESUMO

Understanding the local environment of the metal atoms in salt melts is important for modeling the properties of melts and predicting their behavior and thus helping enable the development of technologies such as molten salt reactors and solar-thermal power systems and new approaches to recycling rare-earth metals. Toward that end, we have developed an in situ approach for measuring the coordination of metals in molten salt coupling X-ray absorption spectroscopy (XAS) and Raman spectroscopy. Our approach was demonstrated for two salt mixtures (1.9 and 5 mol % SrCl2 in NaCl, 0.8 and 5 mol % ZrF4 in LiF) at up to 1100 °C. Near-edge (X-ray absorption near-edge structure, XANES) and extended X-ray absorption fine structure (EXAFS) spectra were measured. The EXAFS response was modeled using ab initio FEFF calculations. Strontium's first shell is observed to be coordinated with chlorine (Sr2+-Cl-) and zirconium's first shell is coordinated by fluorine (Zr4+-F-), both having coordination numbers that decrease with increasing temperature. Multiple zirconium complexes are believed to be present in the melt, which may interfere and distort the EXAFS spectra and result in an anomalously low zirconium first shell coordination number. The use of boron nitride (BN) powder as a salt diluent for XAFS measurements was found to not interfere with measurements and thus can be used for investigations of such systems.

6.
Membranes (Basel) ; 11(10)2021 Oct 05.
Artigo em Inglês | MEDLINE | ID: mdl-34677532

RESUMO

Triple ionic-electronic conductors have received much attention as electrode materials. In this work, the bulk characteristics of oxygen diffusion and surface exchange were determined for the triple-conducting BaCo0.4Fe0.4Zr0.2-XYXO3-δ suite of samples. Y substitution increased the overall size of the lattice due to dopant ionic radius and the concomitant formation of oxygen vacancies. Oxygen permeation measurements exhibited a three-fold decrease in oxygen permeation flux with increasing Y substitution. The DC total conductivity exhibited a similar decrease with increasing Y substitution. These relatively small changes are coupled with an order of magnitude increase in surface exchange rates from Zr-doped to Y-doped samples as observed by conductivity relaxation experiments. The results indicate that Y-doping inhibits bulk O2- conduction while improving the oxygen reduction surface reaction, suggesting better electrode performance for proton-conducting systems with greater Y substitution.

7.
ChemSusChem ; 14(12): 2621-2630, 2021 Jun 21.
Artigo em Inglês | MEDLINE | ID: mdl-33909321

RESUMO

One of the most promising electrolytes for all-solid-state lithium batteries is Li7 La3 Zr2 O12 . Previously, their thermodynamic stability, Li-ion conductivity, and structural features induced by Ga-doping have not been empirically determined or correlated. Here, their interplay was examined for Li7-3x Gax La3 Zr2 O12 with target xGa=0, 0.25, 0.50, 0.75, and 1.00 atoms per formula unit (apfu). Formation enthalpies, obtained with calorimetry and found to be exothermic at all compositions, linearly decreased in stability with increased xGa. At dilute xGa substitution, the formation enthalpy curve shifted stepwise endothermically, and the conductivity increased to a maximum, coinciding with 0.529 Ga apfu. This correlated with percolation threshold analysis (0.558 Ga apfu). Further substitution (0.787 Ga apfu) produced a large decrease in the stability and conductivity due to a large increase in point defects and blocked Li-migration pathways. At xGa=1.140 apfu, a small exothermic shift was related to defect cluster organization extending the Li hopping distance and decreased Li-ion conductivity.

8.
ACS Appl Mater Interfaces ; 12(34): 38012-38018, 2020 Aug 26.
Artigo em Inglês | MEDLINE | ID: mdl-32846475

RESUMO

Understanding the mechanisms of proton conduction at the interface of materials enables the development of a new generation of protonic ceramic conductors at low temperatures (<150 °C) through water absorption and proton transport on the surface and grain boundaries. Conductivity measurements under Ar-3% H2O and Ar-3% D2O revealed a σ(H2O)/σ(D2O) ratio of approximately 2, indicating a hopping-based mechanism for proton conduction at the interface. In situ Raman spectroscopy was performed on water-saturated, porous, and nanostructured TiO2 membranes to directly observe the isotope exchange reactions over the temperature range of 25 to 175 °C. The behavior of the isotope exchange reactions suggested a Grotthuss-type proton transport and faster isotope exchange reactions at 175 °C than that at 25 °C with a corresponding activation energy of 9 kJ mol-1. The quantitative and mechanistic kinetic description of the isotope exchange process via in situ Raman spectroscopy represents a significant advance toward understanding proton transport mechanisms and aids in the development of high-performance proton conductors with rapid surface exchange coefficients of importance to contemporary energy conversion and storage material development. In addition, new material systems are proposed, which combine interface and bulk effects at low temperatures (<150 °C), resulting in enhanced proton transport through interfacial engineering at the nanoscale.

9.
Membranes (Basel) ; 10(5)2020 May 12.
Artigo em Inglês | MEDLINE | ID: mdl-32408617

RESUMO

Protonic ceramics (PCs) with high proton conductivity at intermediate temperatures (300-600 °C) have attracted many applications in energy conversion and storage devices such as PC fuel/electrolysis cells, PC membrane reactors, hydrogen pump, hydrogen or water-permeable membranes, and gas sensors. One of the essential steps for fulfilling the practical utilization of these intermediate-temperature PC energy devices is the successful development of advanced manufacturing methods for cost-effectively and rapidly fabricating them with high energy density and efficiency in a customized demand. In this work, we developed a new laser 3D printing (L3DP) technique by integrating digital microextrusion-based 3D printing and precise and rapid laser processing (sintering, drying, cutting, and polishing), which showed the capability of manufacturing PCs with desired complex geometries, crystal structures, and microstructures. The L3DP method allowed the fabrication of PC parts such as pellets, cylinders, cones, films, straight/lobed tubes with sealed endings, microchannel membranes, and half cells for assembling PC energy devices. The preliminary measurement of the L3DP electrolyte film showed a high proton conductivity of ≈7 × 10-3 S/cm. This L3DP technique not only demonstrated the potential to bring the PCs into practical use but also made it possible for the rapid direct digital manufacturing of ceramic-based devices.

10.
ACS Omega ; 5(20): 11637-11642, 2020 May 26.
Artigo em Inglês | MEDLINE | ID: mdl-32478254

RESUMO

One of the essential challenges for energy conversion and storage devices based on protonic ceramics is that the high temperature (1600-1700 °C) and long-time firing (>10 h) are inevitably required for the fabrication, which makes the sustainable and clean manufacturing of protonic ceramic devices impractical. This study provided a new rapid laser reactive sintering (RLRS) method for the preparation of nine protonic ceramics [i.e., BaZr0.8Y0.2O3-δ (BZY20), BZY20 + 1 wt % NiO, BaCe0.7Zr0.1Y0.1Yb0.1O3-δ (BCZYYb), BCZYYb + 1 wt % NiO, 40 wt % BCZYYb + 60 wt % NiO, BaCe0.85Fe0.15O3-δ-BaCe0.15Fe0.85O3-δ (BCF), BaCo0.4Fe0.4Zr0.1Y0.1O3-δ (BCFZY0.1), BaCe0.6Zr0.3Y0.1O3-δ (BCZY63), and La0.7Sr0.3CrO3-δ (LSC)] with desired crystal structures and microstructures. Following this, the dual-layer half-cells, comprising the porous electrode and dense electrolyte, were prepared by the developed RLRS technique. After applying the BCFZY0.1 cathode, the protonic ceramic fuel cell (PCFC) single cells were prepared and tested initially. The derived conductivity of the RLRS electrolyte films showed comparable proton conductivity with the electrolyte prepared by conventional furnace sintering. The initial cost estimation based on electricity consumption during the sintering process for the fabrication of PCFC single cells showed that RLRS is more competitive than the conventional furnace sintering. This RLRS can be combined with the rapid additive manufacturing of ceramics for the sustainable and clean manufacturing of protonic ceramic energy devices and the processing of other ceramic devices.

11.
ACS Appl Mater Interfaces ; 11(12): 11498-11506, 2019 Mar 27.
Artigo em Inglês | MEDLINE | ID: mdl-30830736

RESUMO

One major challenge for the further development of solid oxide fuel cells is obtaining high-performance cathode materials with sufficient stability against reactions with CO2 present in the ambient atmosphere. However, the enhanced stability is often achieved by using material systems exhibiting decreased performance metrics. The phenomena underlying the performance and stability trade-off has not been well understood. This paper uses antimony-doped SrFeO3-δ as a model material to shed light on the relationship between the structure, stability, and performance of perovskite-structured oxides which are commonly used as cathode materials. X-ray absorption revealed that partial substitution of Fe by Sb leads to a series of changes in the local environment of the iron atom, such as a decrease in the iron oxidation state and increase in the oxygen coordination number. Theoretical calculations show that the structural changes are associated with an increase in both the oxygen vacancy formation energy and metal-oxygen bond energy. The area-specific resistance (ASR) of the perovskite oxide increases with Sb doping, indicating a deterioration of the oxygen reduction activity. Exposure of the materials to CO2 leads to depressed oxygen desorption and an increased ASR, which becomes less pronounced at higher Sb doping levels. Origin of the stability-performance trade-off is discussed based on the structural parameters.

12.
ACS Omega ; 3(10): 13559-13566, 2018 Oct 31.
Artigo em Inglês | MEDLINE | ID: mdl-31458063

RESUMO

Heterostructured composite ceria electrolytes have been shown to accelerate the oxygen reduction activity and provide a new approach to improve solid oxide fuel cell (SOFC) performance. In this study, barium carbonate was added to gadolinium-doped ceria, Gd0.2Ce0.8O2-δ (GDC) electrolyte to improve the electrochemical performance of intermediate-temperature SOFCs. The heterostructured electrolyte was formed by the addition of 5 wt % BaCO3 to a GDC electrolyte, resulting in a reaction during sintering that formed well-dispersed BaCe0.8Gd0.2O3-δ (BCG) throughout the electrolyte. The resulting material was tested as an electrolyte using La0.6Sr0.4Co0.2Fe0.8O3-δ as a cathode, resulting in a dramatic reduction to the polarization resistance of more than half the value (600 and 700 °C, the resistance was reduced from 2.49 and 0.23 Ω cm2 to 1.21 and 0.12 Ω cm2) obtained by using pure GDC as an electrolyte. Furthermore, full cell SOFC tests employing the heterostructured electrolyte conducted during overextended durations indicated that the BCG phase in the 5BCG-GDC electrolyte was stable in an air atmosphere with no observed reactions with residual CO2. This approach of tailoring surface reactivity by tailoring the composition and structure of the electrolyte as opposed to electrode materials provides an alternative method to improve fuel cell performance.

13.
Sci Rep ; 8(1): 5003, 2018 Mar 22.
Artigo em Inglês | MEDLINE | ID: mdl-29567965

RESUMO

The titanate-based hollandite structure is proposed as an effective ceramic waste form for Cs-immobilization. In this study, quantum-mechanical calculations were used to quantify the impact of A-site and B-site ordering on the structural stability of hollandite with compositions BaxCsy(MzTi8-z)O16, where M = Zn2+, Ga3+, and Al3+. The calculated enthalpy of formation agrees with experimental measurements of related hollandite phases from melt solution calorimetry. Ground state geometry optimizations show that, for intermediate compositions (e.g., CsBaGa6Ti18O48), the presence of both Cs and Ba in the A-site tunnels is not energetically favored. However, the decay heat generated during storage of the Cs-containing waste form may overcome the energetics of Ba and Cs mixing in the tunnel structure of hollandite. The ability of the hollandite structure to accommodate the radioparagenesis of Cs to Ba is critical for long term performance of the waste. For the first time, B-site ordering was observed along the tunnel direction ([001] zone axis) for the Ga-hollandite compositions, as well as the intermediate Al-hollandite composition. These compositionally dependent structural features, and associated formation enthalpies, are of importance to the stability and radiation damage tolerance of ceramic waste forms.

14.
Sci Rep ; 8(1): 15294, 2018 Oct 17.
Artigo em Inglês | MEDLINE | ID: mdl-30333564

RESUMO

Formation enthalpies and Gibbs energies of actinide and rare-earth containing SIMs with silicate and germanate frameworks are reported. Volume-based thermodynamics (VBT) techniques complemented by density functional theory (DFT) were adapted and applied to these complex structures. VBT and DFT results were in closest agreement for the smaller framework silicate structure, whereas DFT in general predicts less negative enthalpies across all SIMs, regardless of framework type. Both methods predict the rare-earth silicates to be the most stable of the comparable structures calculated, with VBT results being in good agreement with the limited experimental values available from drop solution calorimetry.

15.
ACS Appl Mater Interfaces ; 9(10): 8659-8668, 2017 Mar 15.
Artigo em Inglês | MEDLINE | ID: mdl-28181431

RESUMO

A new heterostructured (La,Sr)2FeO4-δ (LSF214)-La0.8Sr0.2FeO3-δ (LSF113) electrode has been synthesized to improve the oxygen reduction reaction (ORR). This new materials system was fabricated by the deposition of Sr(NO3)2 into the LSF113 framework followed by subsequent heat treatment, resulting in a new three-dimensional (3D) LSF214-LSF113 heterostructured electrode. This material system consists of a with Ruddlesden-Popper (R-P) LSF214 phase formed on the surface of the LSF113 framework. The ORR activity has been enhanced by 1 order of magnitude using the LSF214-LSF113 heterostructured electrode. The ORR enhancement was the result of higher catalytic activity of the LSF214 phase and a mismatch in the lattice parameter between LSF214 and LSF113 regions which results in oxygen molecule adsorption and oxygen vacancy formation become more favered. Impedance spectroscopy measurements revealed that the presence of LSF214 reduced the polarization resistance of the LSF113 electrode on a ceria-based electrolyte. The high frequency resistance (RH) and low frequency resistance (RL) decreased substantially due to the enhanced oxygen transport process and accelerated oxygen incorporation rate in the LSF214-LSF113 heterostructured electrode. The heterostructured LSF214-LSF113 electrode provides a promising new approach to improve the oxygen reduction reaction activity through multiphase materials systems with tailored microstructures.

16.
Sci Rep ; 6: 27412, 2016 06 07.
Artigo em Inglês | MEDLINE | ID: mdl-27273791

RESUMO

The hollandite structure is a promising crystalline host for Cs immobilization. A series of Ga-doped hollandite BaxCsyGa2x+yTi8-2x-yO16 (x = 0, 0.667, 1.04, 1.33; y = 1.33, 0.667, 0.24, 0) was synthesized through a solid oxide reaction method resulting in a tetragonal hollandite structure (space group I4/m). The lattice parameter associated with the tunnel dimension was found to increases as Cs substitution in the tunnel increased. A direct investigation of cation mobility in tunnels using electrochemical impedance spectroscopy was conducted to evaluate the ability of the hollandite structure to immobilize cations over a wide compositional range. Hollandite with the largest tunnel size and highest aspect ratio grain morphology resulting in rod-like microstructural features exhibited the highest ionic conductivity. The results indicate that grain size and optimized Cs stoichiometry control cation motion and by extension, the propensity for Cs release from hollandite.

17.
Nat Commun ; 6: 6824, 2015 Apr 10.
Artigo em Inglês | MEDLINE | ID: mdl-25857355

RESUMO

Mixed ionic-electronic conductors are widely used in devices for energy conversion and storage. Grain boundaries in these materials have nanoscale spatial dimensions, which can generate substantial resistance to ionic transport due to dopant segregation. Here, we report the concept of targeted phase formation in a Ce0.8Gd0.2O2-δ-CoFe2O4 composite that serves to enhance the grain boundary ionic conductivity. Using transmission electron microscopy and spectroscopy approaches, we probe the grain boundary charge distribution and chemical environments altered by the phase reaction between the two constituents. The formation of an emergent phase successfully avoids segregation of the Gd dopant and depletion of oxygen vacancies at the Ce0.8Gd0.2O2-δ-Ce0.8Gd0.2O2-δ grain boundary. This results in superior grain boundary ionic conductivity as demonstrated by the enhanced oxygen permeation flux. This work illustrates the control of mesoscale level transport properties in mixed ionic-electronic conductor composites through processing induced modifications of the grain boundary defect distribution.

18.
ACS Appl Mater Interfaces ; 6(1): 725-30, 2014 Jan 08.
Artigo em Inglês | MEDLINE | ID: mdl-24328190

RESUMO

Conventional Ni-BaCeO3-based membranes possess high hydrogen permeation flux but suffer serious flux degradation in CO2-containing atmosphere because of the formation of BaCO3 insulating layer. In this work, we report a novel Ni-BaZr0.1Ce0.7Y0.1Yb0.1O(3-δ) (Ni-BZCYYb) membrane, capable of both high hydrogen permeation flux and stable performance in CO2-containing atmosphere at 900 °C. Most importantly, the flux is found to be promoted rather than being diminished by CO2 normally observed for other high temperature proton conductors. The flux enhancement in Ni-BZCYYb membrane is attributed to the increase of moisture content in feed gas. When CO2 is introduced, the reverse water-gas shift reaction takes place generating H2O and CO. This work demonstrates that CO2 can be beneficial rather than detrimental for hydrogen permeation membranes that possess high chemical stability.

19.
Nanoscale ; 6(9): 4480-5, 2014 May 07.
Artigo em Inglês | MEDLINE | ID: mdl-24615571

RESUMO

The microstructure and connectivity of the ionic and electronic conductive phases in composite ceramic membranes are directly related to device performance. Transmission electron microscopy (TEM) including chemical mapping combined with X-ray nanotomography (XNT) have been used to characterize the composition and 3-D microstructure of a MIEC composite model system consisting of a Ce0.8Gd0.2O2 (GDC) oxygen ion conductive phase and a CoFe2O4 (CFO) electronic conductive phase. The microstructural data is discussed, including the composition and distribution of an emergent phase which takes the form of isolated and distinct regions. Performance implications are considered with regards to the design of new material systems which evolve under non-equilibrium operating conditions.

SELEÇÃO DE REFERÊNCIAS
Detalhe da pesquisa