RESUMO
INTRODUCTION: Radiotherapy to the bladder has a risk of toxicity to pelvic structures, which can be reduced by using fiducial markers for targeting. Injectable contrast offers an alternative marker to gold seeds, which may fall out or exacerbate scarring. Combining contrast agents with tissue glue can minimize dispersion through tissue, enhancing its utility. We evaluated combinations of contrast agents and tissue glue using porcine bladder, for feasibility and utility as fiducial markers to aid image-guided radiotherapy. METHODS: Different contrast agents (Lipiodol ultra or Urografin) were combined with different tissue glues (Histoacryl, Tisseal or Glubran2). The mixtures were endoscopically injected into porcine bladder submucosa to identify the area of interest with multiple fiducial markers. The porcine bladders were imaged within a phantom porcine pelvis using standard radiation therapy imaging modalities. The feasibility as an injectable fiducial marker and visibility of each fiducial marker on imaging were scored as binary outcomes by two proceduralists and two radiation therapists, respectively. RESULTS: Lipiodol-glue combinations were successfully administered as multiple fiducials that were evident on CT and CBCT. Lipiodol with Histoacryl or Glubran2 was visible on kV imaging. The Lipiodol Glubran2 combination was deemed subjectively easiest to use at delivery, and a better fiducial on KV imaging. CONCLUSION: This study demonstrates the feasibility of mixing contrast medium Lipiodol with Histoacryl or Glubran2 tissue glue, which, injected endoscopically, provides discrete and visible fiducial markers to aid image-guided radiotherapy. Although promising, further study is required to assess the durability of these markers through a course of radiotherapy.
Assuntos
Marcadores Fiduciais , Radioterapia Guiada por Imagem/métodos , Neoplasias da Bexiga Urinária/radioterapia , Animais , Tomografia Computadorizada de Feixe Cônico , Cianoacrilatos , Cistoscopia , Diatrizoato de Meglumina , Embucrilato , Óleo Etiodado , Estudos de Viabilidade , Adesivo Tecidual de Fibrina , Suínos , Adesivos Teciduais , Tomografia Computadorizada por Raios XRESUMO
Background and purpose: Treatment planning for MR-guided stereotactic body radiotherapy (SBRT) for pancreatic tumors can be challenging, leading to a wide variation of protocols and practices. This study aimed to harmonize treatment planning by developing a consensus planning protocol for MR-guided pancreas SBRT on a 1.5 T MR-Linac. Materials and methods: A consortium was founded of thirteen centers that treat pancreatic tumors on a 1.5 T MR-Linac. A phased planning exercise was conducted in which centers iteratively created treatment plans for two cases of pancreatic cancer. Each phase was followed by a meeting where the instructions for the next phase were determined. After three phases, a consensus protocol was reached. Results: In the benchmarking phase (phase I), substantial variation between the SBRT protocols became apparent (for example, the gross tumor volume (GTV) D99% ranged between 36.8 - 53.7 Gy for case 1, 22.6 - 35.5 Gy for case 2). The next phase involved planning according to the same basic dosimetric objectives, constraints, and planning margins (phase II), which led to a large degree of harmonization (GTV D99% range: 47.9-53.6 Gy for case 1, 33.9-36.6 Gy for case 2). In phase III, the final consensus protocol was formulated in a treatment planning system template and again used for treatment planning. This not only resulted in further dosimetric harmonization (GTV D99% range: 48.2-50.9 Gy for case 1, 33.5-36.0 Gy for case 2) but also in less variation of estimated treatment delivery times. Conclusion: A global consensus protocol has been developed for treatment planning for MR-guided pancreatic SBRT on a 1.5 T MR-Linac. Aside from harmonizing the large variation in the current clinical practice, this protocol can provide a starting point for centers that are planning to treat pancreatic tumors on MR-Linac systems.
RESUMO
INTRODUCTION: Polylactic acid (PLA) is a promising material for customised bolus 3D-printing in radiotherapy, however variations in printing techniques between external manufacturers could increase treatment uncertainties. This study aimed to assess consistency across various 3D-printed PLA samples from different manufacturers. METHODS: Sample prints of dimensions 5 × 5 × 1 cm with 100% infill were acquired from multiple commercial 3D-printing services. All samples were CT scanned to determine average Hounsfield unit (HU) values and physical densities. The coefficient of equivalent thickness (CET) was obtained for both photons and electrons and dose attenuation compared to TPS calculations in Elekta Monaco v5.11. RESULTS: Some samples showed warped edges up to 1.5 mm and extensive internal radiological defects only detectable with CT scanning. Physical densities ranged from 1.06 to 1.22 g cm-3 and HU values ranged from -5.1 to 221.0 HU. Measured CET values varied from 0.95 to 1.17 and TPS dose calculations were consistent with the variation in CET. Electron R50 and R90 shifted by up to 2 mm for every 1 cm of printed bolus, a clinically significant finding. Photon surface dose varied by up to 3%, while depth doses were within 1%. CONCLUSIONS: 3D-printed PLA can have considerable variability in density, HU and CET values between samples and manufacturers. Centres looking to outsource 3D-printed bolus would benefit from clear, open communication with manufacturers and undertake stringent QA examination prior to implementation into the clinical environment.
Assuntos
Poliésteres , Impressão Tridimensional , Imagens de Fantasmas , Tomografia Computadorizada por Raios X/métodosRESUMO
INTRODUCTION: The COVID-19 pandemic demanded a rapid response within Radiation Oncology services to minimise the risk of infection to patients and workforce. This study aimed to assess whether the operational changes put in place to reduce infection risks were effective in engaging and supporting staff. METHODS: Our service's response saw staff and patients split into morning or afternoon shifts without overlap. Changes included extended clinic hours, modified treatment regimens, expanded online/electronic communication and remote working. Staff were invited to respond to an electronic questionnaire in September 2020, just after the peak of the second COVID-19 wave in Victoria. Responses captured demographic data, parental status, profession, happiness levels, fear of COVID-19 and e-communication efficacy. RESULTS: A 57% response rate was achieved. 69% of respondents were female; 40% were aged 45+ and 35% had school-aged children. Staff aged 45+ showed a significantly greater fear of COVID-19 than younger staff. 36% of respondents reported feeling nervous or anxious watching news reports about COVID-19. 92% of staff were happy with their work arrangements; staff with children were happier than staff without children with their shifts. Online chat/channels were reported as the preferred e-communication method between colleagues. CONCLUSION: Staff provided predominantly positive feedback to the changes made in response to the pandemic, reporting high levels of happiness and willingness to continue with the changes implemented during COVID-19. The strategies adopted worked well and the overall high levels of staff satisfaction will allow our service to quickly pivot should further surges, or another pandemic, arise.
Assuntos
Atitude do Pessoal de Saúde , COVID-19/prevenção & controle , Radio-Oncologistas/psicologia , Radio-Oncologistas/estatística & dados numéricos , Recursos Humanos/estatística & dados numéricos , Adulto , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Pandemias , SARS-CoV-2 , Inquéritos e Questionários , VitóriaRESUMO
BACKGROUND AND PURPOSE: Image-guidance with fiducials has been shown to improve pelvic radiotherapy outcome. However, bladder fiducials using ethiodized oil (EO) alone can disperse widely, and gold causes Computed Tomography scan (CT) metal artifacts. The study's purpose was to investigate the ability to deliver EO-tissue glue fiducials and compare them to gold for bladder radiotherapy image guidance. MATERIALS AND METHODS: A fluid-filled porcine bladder model was used to assess the ability to cystoscopically inject visible EO glue fiducials into the submucosa. We then transferred the bladders into a porcine pelvis for imaging and compared them to gold fiducials using CT, Cone Beam CT (CBCT), and kilovoltage (KV) planar views. A tissue-equivalent phantom was utilized to analyze the CT number Hounsfield Unit (HU) characteristics and artifacts of the glue and gold fiducials. Percentile ranges and normal tissue voxel percentages of the subsequent CT number voxel histogram from a 2 cm sphere surrounding the fiducial was used to characterize the artifact. RESULTS: We successfully delivered all EO glue fiducials into the porcine bladders as discrete fiducials. They were well seen on CT, CBCT, and KV imaging. The glue fiducials had lower CT number values, but less CT number spread of the voxel percentile ranges consistent with the diminished contrast and less artifact than gold. The glue fiducial types had similar CT number characteristics. CONCLUSION: This study has shown that EO glue fiducials can be delivered with online visualization qualities comparable to gold fiducials without metal-related artifacts.