Biosynthesis of photostable CdS quantum dots by UV-resistant psychrotolerant bacteria isolated from Union Glacier, Antarctica.

BACKGROUND: Quantum Dots (QDs) are fluorescent nanoparticles with exceptional optical and optoelectronic properties, finding widespread utility in diverse industrial applications. Presently, chemically synthesized QDs are employed in solar cells, bioimaging, and various technological domains. However, many applications demand QDs with prolonged lifespans under conditions of high-energy radiation. Over the past decade, microbial biosynthesis of nanomaterials has emerged as a sustainable and cost-effective process. In this context, the utilization of extremophile microorganisms for synthesizing QDs with unique properties has recently been reported. RESULTS: In this study, UV-resistant bacteria were isolated from one of the most extreme environments in Antarctica, Union Glacier at the Ellsworth Mountains. Bacterial isolates, identified through 16 S sequencing, belong to the genera Rhodococcus, Pseudarthrobacter, and Arthrobacter. Notably, Rhodococcus sp. (EXRC-4 A-4), Pseudarthrobacter sp. (RC-2-3), and Arthrobacter sp. (EH-1B-1) tolerate UV-C radiation doses ≥ 120 J/m². Isolated UV-resistant bacteria biosynthesized CdS QDs with fluorescence intensities 4 to 8 times higher than those biosynthesized by E. coli, a mesophilic organism tolerating low doses of UV radiation. Transmission electron microscopy (TEM) analysis determined QD sizes ranging from 6 to 23 nm, and Fourier-transform infrared (FTIR) analysis demonstrated the presence of biomolecules. QDs produced by UV-resistant Antarctic bacteria exhibit high photostability after exposure to UV-B radiation, particularly in comparison to those biosynthesized by E. coli. Interestingly, red fluorescence-emitting QDs biosynthesized by Rhodococcus sp. (EXRC-4 A-4) and Arthrobacter sp. (EH-1B-1) increased their fluorescence emission after irradiation. Analysis of methylene blue degradation after exposure to irradiated QDs biosynthesized by UV-resistant bacteria, indicates that the QDs transfer their electrons to O2 for the formation of reactive oxygen species (ROS) at different levels. CONCLUSIONS: UV-resistant Antarctic bacteria represent a novel alternative for the sustainable generation of nanostructures with increased radiation tolerance-two characteristics favoring their potential application in technologies requiring continuous exposure to high-energy radiation.

Toxicity Mechanisms of Copper Nanoparticles and Copper Surfaces on Bacterial Cells and Viruses.

Copper is a metal historically used to prevent infections. One of the most relevant challenges in modern society are infectious disease outbreaks, where copper-based technologies can play a significant role. Currently, copper nanoparticles and surfaces are the most common antimicrobial copper-based technologies. Despite the widespread use of copper on nanoparticles and surfaces, the toxicity mechanism(s) explaining their unique antimicrobial properties are not entirely known. In general, toxicity effects described in bacteria and fungi involve the rupture of membranes, accumulation of ions inside the cell, protein inactivation, and DNA damage. A few studies have associated Cu-toxicity with ROS production and genetic material degradation in viruses. Therefore, understanding the mechanisms of the toxicity of copper nanoparticles and surfaces will contribute to developing and implementing efficient antimicrobial technologies to combat old and new infectious agents that can lead to disease outbreaks such as COVID-19. This review summarizes the current knowledge regarding the microbial toxicity of copper nanoparticles and surfaces and the gaps in this knowledge. In addition, we discuss potential applications derived from discovering new elements of copper toxicity, such as using different molecules or modifications to potentiate toxicity or antimicrobial specificity.

Structural Factors That Determine the Activity of the Xenobiotic Reductase B Enzyme from Pseudomonas putida on Nitroaromatic Compounds.

Xenobiotic reductase B (XenB) catalyzes the reduction of the aromatic ring or nitro groups of nitroaromatic compounds with methyl, amino or hydroxyl radicals. This reaction is of biotechnological interest for bioremediation, the reuse of industrial waste or the activation of prodrugs. However, the structural factors that explain the binding of XenB to different substrates are unknown. Molecular dynamics simulations and quantum mechanical calculations were performed to identify the residues involved in the formation and stabilization of the enzyme/substrate complex and to explain the use of different substrates by this enzyme. Our results show that Tyr65 and Tyr335 residues stabilize the ligands through hydrophobic interactions mediated by the aromatic rings of these aminoacids. The higher XenB activity determined with the substrates 1,3,5-trinitrobenzene and 2,4,6-trinitrotoluene is consistent with the lower energy of the highest occupied molecular orbital (LUMO) orbitals and a lower energy of the homo orbital (LUMO), which favors electrophile and nucleophilic activity, respectively. The electrostatic potential maps of these compounds suggest that the bonding requires a large hydrophobic region in the aromatic ring, which is promoted by substituents in ortho and para positions. These results are consistent with experimental data and could be used to propose point mutations that allow this enzyme to process new molecules of biotechnological interest.

Phosphate Favors the Biosynthesis of CdS Quantum Dots in Acidithiobacillus thiooxidans ATCC 19703 by Improving Metal Uptake and Tolerance.

Recently, we reported the production of Cadmium sulfide (CdS) fluorescent semiconductor nanoparticles (quantum dots, QDs) by acidophilic bacteria of the Acidithiobacillus genus. Here, we report that the addition of inorganic phosphate to Acidithiobacillus thiooxidans ATCC 19703 cultures favors the biosynthesis of CdS QDs at acidic conditions (pH 3.5). The effect of pH, phosphate and cadmium concentrations on QDs biosynthesis was studied by using Response Surface Methodology (RSM), a multivariate technique for analytical optimization scarcely used in microbiological studies to date. To address how phosphate affects intracellular biosynthesis of CdS QDs, the effect of inorganic phosphate on bacterial cadmium-uptake was evaluated. By measuring intracellular levels of cadmium we determined that phosphate influences the capacity of cells to incorporate this metal. A relation between cadmium tolerance and phosphate concentrations was also determined, suggesting that phosphate participates in the adaptation of bacteria to toxic levels of this metal. In addition, QDs-biosynthesis was also favored by the degradation of intracellular polyphosphates. Altogether, our results indicate that phosphate contributes to A. thiooxidans CdS QDs biosynthesis by influencing cadmium uptake and cadmium tolerance. These QDs may also be acting as a nucleation point for QDs formation at acidic pH. This is the first study reporting the effect of phosphates on QDs biosynthesis and describes a new cadmium-response pathway present in A. thiooxidans and most probably in other bacterial species.

Co-synthesis of medium-chain-length polyhydroxyalkanoates and CdS quantum dots nanoparticles in Pseudomonas putida KT2440.

Microbial polymers and nanomaterials production is a promising alternative for sustainable bioeconomics. To this end, we used Pseudomonas putida KT2440 as a cell factory in batch cultures to coproduce two important nanotechnology materials- medium-chain-length (MCL)-polyhydroxyalkanoates (PHAs) and CdS fluorescent nanoparticles (i.e. quantum dots [QDots]). Due to high cadmium resistance, biomass and PHA yields were almost unaffected by coproduction conditions. Fluorescent nanocrystal biosynthesis was possible only in presence of cysteine. Furthermore, this process took place exclusively in the cell, displaying the classical emission spectra of CdS QDots under UV-light exposure. Cell fluorescence, zeta potential values, and particles size of QDots depended on cadmium concentration and exposure time. Using standard PHA-extraction procedures, the biosynthesized QDots remained associated with the biomass, and the resulting PHAs presented no traces of CdS QDots. Transmission electron microscopy located the synthesized PHAs in the cell cytoplasm, whereas CdS nanocrystals were most likely located within the periplasmic space, exhibiting no apparent interaction. This is the first report presenting the microbial coproduction of MCL-PHAs and CdS QDots in P. putida KT2440, thus constituting a foundation for further bioprocess developments and strain engineering towards the efficient synthesis of these highly relevant bioproducts for nanotechnology.

Impact of maternal exposure to wood smoke pollution on fetal lung morphology in a rat model / Impacto de la exposición materna a la contaminación por humo de leña en la morfología pulmonar fetal en un modelo de rata

SUMMARY: Residential heating with wood is an important source of ambient air pollution. Evidence links air pollution to serious health effects such as respiratory and cardiovascular mortality and morbidity. We hypothesized that prenatal exposure to wood smoke pollution causes morphological changes in the development of the rat lung, leading to altered lung structure and function during later life. We presumed that analysis of the fetal lung stereology provides novel insights into the underlying processes mediating particulate matter associated developmental changes and damage. The objective of the study was to investigate the effects of exposure during gestational period to wood smoke pollution on lung fetal morphology. To test this, pregnant rats were exposed during pregestational and gestational periods to wood smoke pollution. Complete lungs samples were obtained from 24 fetus from healthy female G3 rats subjected to cesarean at 19 days post-fecundation. The lungs were prepared for histological and stereological analysis. The volume fraction of terminal bronchioles VV [tb, lung] and volume fraction of parenchyma VV [par, lung], surface density of terminal bronchioles SV [tb, lung] as well as numerical density of bronchiolar exocrinocytes NA [ec,lung] were calculated by light microscopy. Statistical analysis detected significant differences between groups in volume density VV [tb, lung; %] (p=0.0012) and surface density SV [tb, lung; mm2/mm3] (p<0.0001) of the terminal bronchioles. However, it did not show differences between groups in the stereological parameter volume density VV [par, lung; %] (p=0.0838) and numerical density of bronchiolar exocrinocytes NA [ec,lung; nº/mm2] (p=0.0705). The analysis of the evidence obtained indicates that exposure to environmental pollution was affects lung maturation, and particularly the proportion and area of terminal bronchioles in the fetal lung. In conclusion, maternal exposure to wood smoke pollution during pregnancy was associated with a decrease in the lower conducting airways of lungs, which, according to urban pollution studies, could be related to early childhood lower respiratory illness. The public health implications of this study are that reducing or avoiding exposure to wood smoke is important before and during pregnancy.

RESUMEN: La calefacción residencial con leña es una fuente importante de contaminación ambiental. La evidencia vincula la contaminación del aire con graves efectos sobre la salud, como la mortalidad y la morbilidad respiratoria y cardiovascular. Hipotetizamos que la exposición prenatal a la contaminación por humo de leña causa cambios en el desarrollo del pulmón de rata, lo que conduce a una morfo-función pulmonar alteradas durante la vida posterior, creemos que el análisis de la estereología pulmonar fetal proporcionará nuevos conocimientos sobre los procesos subyacentes que median esos cambios. El objetivo del estudio fue investigar los efectos de la exposición prenatal a la contaminación ambiental por humo de leña sobre la morfología pulmonar fetal. Ratas preñadas fueron expuestas durante los períodos pregestacional y gestacional a la contaminación por humo de leña. En fetos de 19 días post-fecundación fue obtenido el pulmón para análisis histológico y estereológico. Fue determinado la fracción de volumen de bronquiolos terminales VV [tb, pulmón], fracción de volumen del parénquima VV [par, pulmón], densidad superficial de los bronquiolos terminales SV [tb, pulmón] así como la densidad numérica de exocrinocitos NA [ec, pulmón]. El análisis estadístico detectó diferencias significativas entre grupos en la densidad de volumen V [tb, pulmón; %] (p=0,0012) y densidad superficial SV [tb, pulmón; mm2/mm3] (p<0,0001) de los bronquiolos terminales. Sin embargo, no demostró diferencias entre grupos en la densidad de volumen VV [par, pulmón; %] (p=0,0838) y numérica de exocrinocitos bronquiolares NA [ec, pulmón; nº / mm ] (p=0,0705). El análisis de la evidencia obtenida indica que la exposición a la contaminación ambiental afectó la maduración pulmonar, y particularmente la proporción y área de bronquiolos terminales en el pulmón fetal. En conclusión, la exposición materna a la contaminación por humo de leña durante la gestación se asoció a una disminución de las vías respiratorias conductoras de aire en pulmón, lo que, según estudios de contaminación urbana, podría estar relacionado con enfermedades de las vías respiratorias inferiores en la primera infancia. Las implicaciones para la salud pública de este estudio son que reducir o evitar la exposición al humo de leña es importante previo y durante la gestación. Por otro lado, la contaminación por humo de leña tiene un gran impacto en la salud pública que, en teoría, es posible prevenir.