RESUMO
This paper presents an experimental setup to measure the horizontal centering error of a pre-built pyroelectric infrared (PIR) sensor module, in which a dual-element PIR sensor is aligned at the focal point of a single-zone Fresnel Lens. In the setup, the sensor module was placed facing a modulated infrared radiating source and turned over a range of horizontal angles. The position of the optical axis of the sensor module was determined based on the analysis of the output response of the sensor at turned angles. Thus, the horizontal centering error of the module is defined as the difference between the mechanical axis of the housing and the found optical axis. For the prebuilt sensor module, with the specific available equipment, the measurement of the centering error of the module achieved a resolution of 0.02 degrees.
RESUMO
The deep drawing process, a pivotal technique in sheet metal forming, frequently encounters challenges such as anisotropy-induced defects. This study comprehensively investigates the influence of various yield criteria on the anisotropic behavior and fracture prediction in SECC steel cylindrical cups. It integrates Hill'48R, Hill'48S, and von Mises yield criteria in conjunction with Swift's hardening law to evaluate material behavior under complex stress states. Experimental and numerical simulations assess the anisotropy effects across multiple orientations (0°, 45°, and 90°), revealing intricate relationships between stress criteria and material response. The findings indicate significant discrepancies between isotropic and anisotropic models in predicting fracture heights, emphasizing the importance of selecting appropriate yield criteria. Notably, the von Mises criterion results in lower fracture heights, suggesting higher susceptibility to fractures, while the Hill'48R model aligns closely with experimental data, validated through variations in punch corner radius and blank holder force parameters, with a maximum deviation of 3.23%. Hill'48S displays moderate plastic deformation characteristics.
RESUMO
Enhancing the operational efficacy of electrical discharge machining (EDM) is crucial for achieving optimal results in various engineering materials. This study introduces an innovative solution-the use of coated electrodes-representing a significant advancement over current limitations. The choice of coating material is critical for micro-EDM performance, necessitating a thorough investigation of its impact. This research explores the application of different coating materials (AlCrN, TiN, and Carbon) on WC electrodes in micro-EDM processes specifically designed for Ti-6Al-4V. A comprehensive assessment was conducted, focusing on key quality indicators such as depth of cut (Z), tool wear rate (TWR), overcut (OVC), and post-machining surface quality. Through rigorous experimental methods, the study demonstrates substantial improvements in these quality parameters with coated electrodes. The results show significant enhancements, including increased Z, reduced TWR and OVC, and improved surface quality. This evidence underscores the effectiveness of coated electrodes in enhancing micro-EDM performance, marking a notable advancement in the precision and quality of Ti-6Al-4V machining processes. Among the evaluated coatings, AlCrN-coated electrodes exhibited the greatest increase in Z, the most significant reduction in TWR, and the best OVC performance compared to other coatings and the uncoated counterpart.
RESUMO
Expanding upon the well-established Takagi-Sugeno (T-S) fuzzy model, the T-S fuzzy descriptor model emerges as a robust and flexible framework. This article introduces the development of optimal and robust-optimal controllers grounded in the principles of stability control and fuzzy descriptor systems. By transforming complicated inequalities into linear matrix inequalities (LMI), we establish the essential conditions for controller construction, as delineated in theorems. To substantiate the utility of these controllers, we employ the rotary inverted pendulum as a testbed. Through diverse simulation scenarios, these controllers, rooted in fuzzy descriptor systems, demonstrate their practicality and effectiveness in ensuring the stable control of inverted pendulum systems, even in the presence of uncertainties within the model. This study highlights the adaptability and robustness of fuzzy descriptor-based controllers, paving the way for advanced control strategies in complex and uncertain environments.
RESUMO
The Takagi-Sugeno (T-S) fuzzy model is a versatile approach widely used in system control, often in combination with other strategies. This paper addresses key control challenges linked to the T-S system and presents important considerations to ensure its successful application using the Lyapunov theorem. One crucial aspect is determining the optimal number of premise variables and selecting accurate fuzzy rules for the T-S model. Additionally, the theorem based on Linear Matrix Inequality (LMI) is developed to enable effective disturbance rejection. To enhance stability control, constraints are imposed on the output angle and control input of a rotary inverted pendulum (RIP). By integrating T-S fuzzy control, disturbance rejection, and input/output constraints, robust stability in controlling the RIP is achieved. Extensive simulations are performed to showcase the efficiency of the suggested method, and the simulation results are thoroughly discussed and analyzed to verify the efficacy of the control method.
RESUMO
Pneumatic artificial muscle (PAM) is a potential actuator in human-robot interaction systems, especially rehabilitation systems. However, PAM is a nonlinear actuator with uncertainty and a considerable delay in characteristics, making control challenging. This study presents a discrete-time sliding mode control approach combined with the adaptive fuzzy algorithm (AFSMC) to deal with the unknown disturbance of the PAM-based actuator. The developed fuzzy logic system has parameter vectors of the component rules that are automatically updated by an adaptive law. Consequently, the developed fuzzy logic system can reasonably approximate the system disturbance. When operating the PAM-based system in multi-scenario studies, experimental results confirm the efficiency of the proposed strategy.