Vascular endothelial growth factor-A gene electrotransfer promotes angiogenesis in a porcine model of cardiac ischemia.

This study aimed to assess safety and therapeutic potential of gene electrotransfer (GET) as a method for delivery of plasmid encoding vascular endothelial growth factor A (VEGF-A) to ischemic myocardium in a porcine model. Myocardial ischemia was induced by surgically occluding the left anterior descending coronary artery in swine. GET following plasmid encoding VEGF-A injection was performed at four sites in the ischemic region. Control groups either received injections of the plasmid without electrotransfer or injections of the saline vehicle. Animals were monitored for 7 weeks and the hearts were evaluated for angiogenesis, myocardial infarct size and left ventricular contractility. Arteriograms suggest growth of new arteries as early as 2 weeks after treatment in electrotransfer animals. There is a significant reduction of infarct area and left ventricular contractility is improved in GET-treated group compared with controls. There was no significant difference in mortality of animals treated with GET of plasmid encoding VEGF-A from the control groups. Gene delivery of plasmid encoding VEGF-A to ischemic myocardium in a porcine model can be accomplished safely with potential for myocardial repair and regeneration.

Gain-of-function mutant p53 upregulates CXC chemokines and enhances cell migration.

The role of dominant transforming p53 in carcinogenesis is poorly understood. Our previous data suggested that aberrant p53 proteins can enhance tumorigenesis and metastasis. Here, we examined potential mechanisms through which gain-of-function (GOF) p53 proteins can induce motility. Cells expressing GOF p53 -R175H, -R273H and -D281G showed enhanced migration, which was reversed by RNA interference (RNAi) or transactivation-deficient mutants. In cells with engineered or endogenous p53 mutants, enhanced migration was reduced by downregulation of nuclear factor-kappaB2, a GOF p53 target. We found that GOF p53 proteins upregulate CXC-chemokine expression, the inflammatory mediators that contribute to multiple aspects of tumorigenesis. Elevated expression of CXCL5, CXCL8 and CXCL12 was found in cells expressing oncogenic p53. Transcription was elevated as CXCL5 and CXCL8 promoter activity was higher in cells expressing GOF p53, whereas wild-type p53 repressed promoter activity. Chromatin immunoprecipitation assays revealed enhanced presence of acetylated histone H3 on the CXCL5 promoter in H1299/R273H cells, in agreement with increased transcriptional activity of the promoter, whereas RNAi-mediated repression of CXCL5 inhibited cell migration. Consistent with this, knockdown of the endogenous mutant p53 in lung cancer or melanoma cells reduced CXCL5 expression and cell migration. Furthermore, short hairpin RNA knockdown of mutant p53 in MDA-MB-231 cells reduced expression of a number of key targets, including several chemokines and other inflammatory mediators. Finally, CXCL5 expression was also elevated in lung tumor samples containing GOF p53, indicating relevance to human cancer. The data suggest a mechanistic link between GOF p53 proteins and chemokines in enhanced cell motility.

Assembled Cell-Decorated Collagen (AC-DC) Fiber Bioprinted Implants with Musculoskeletal Tissue Properties Promote Functional Recovery in Volumetric Muscle Loss.

Musculoskeletal tissue injuries, including volumetric muscle loss (VML), are commonplace and often lead to permanent disability and deformation. Addressing this healthcare need, an advanced biomanufacturing platform, assembled cell-decorated collagen (AC-DC) bioprinting, is invented to rapidly and reproducibly create living biomaterial implants, using clinically relevant cells and strong, microfluidic wet-extruded collagen microfibers. Quantitative analysis shows that the directionality and distribution of cells throughout AC-DC implants mimic native musculoskeletal tissue. AC-DC bioprinted implants further approximate or exceed the strength and stiffness of human musculoskeletal tissue and exceed collagen hydrogel tensile properties by orders of magnitude. In vivo, AC-DC implants are assessed in a critically sized muscle injury in the hindlimb, with limb torque generation potential measured over 12 weeks. Both acellular and cellular implants promote functional recovery compared to the unrepaired group, with AC-DC implants containing therapeutic muscle progenitor cells promoting the highest degree of recovery. Histological analysis and automated image processing of explanted muscle cross-sections reveal increased total muscle fiber count, median muscle fiber size, and increased cellularization for injuries repaired with cellularized implants. These studies introduce an advanced bioprinting method for generating musculoskeletal tissue analogs with near-native biological and biomechanical properties with the potential to repair myriad challenging musculoskeletal injuries.

Comprehensive collagen crosslinking comparison of microfluidic wet-extruded microfibers for bioactive surgical suture development.

Collagen microfiber-based constructs have garnered considerable attention for ligament, tendon, and other soft tissue repairs, yet with limited clinical translation due to strength, biocompatibility, scalable manufacturing, and other challenges. Crosslinking collagen fibers improves mechanical properties; however, questions remain regarding optimal crosslinking chemistries, biocompatibility, biodegradation, long-term stability, and potential for biotextile assemble at scale, limiting their clinical usefulness. Here, we assessed over 50 different crosslinking chemistries on microfluidic wet-extruded collagen microfibers made with clinically relevant collagen to optimize collagen fibers as a biotextile yarn for suture or other medical device manufacture. The endogenous collagen crosslinker, glyoxal, provides extraordinary fiber ultimate tensile strength near 300MPa, and Young's modulus of over 3GPa while retaining 50% of the initial load-bearing capacity through 6 months as hydrated. Glyoxal crosslinked collagen fibers further proved cytocompatible and biocompatible per ISO 10993-based testing, and further elicits a predominantly M2 macrophage response. Remarkably these strong collagen fibers are amenable to industrial braiding to form strong collagen fiber sutures. Collagen microfluidic wet extrusion with glyoxal crosslinking thus progress bioengineered, strong, and stable collagen microfibers significantly towards clinical use for potentially promoting efficient healing compared to existing suture materials. STATEMENT OF SIGNIFICANCE: Towards improving clinical outcomes for over 1 million ligament and tendon surgeries performed annually, we report an advanced microfluidic extrusion process for type I collagen microfiber manufacturing for biological suture and other biotextile manufacturing. This manuscript reports the most extensive wet-extruded collagen fiber crosslinking compendium published to date, providing a tremendous recourse to the field. Collagen fibers made with clinical-grade collagen and crosslinked with glyoxal, exhibit tensile strength and stability that surpasses all prior reports. This is the first report demonstrating that glyoxal, a native tissue crosslinker, has the extraordinary ability to produce strong, cytocompatible, and biocompatible collagen microfibers. These collagen microfibers are ideal for advanced research and clinical use as surgical suture or other tissue-engineered medical products for sports medicine, orthopedics, and other surgical indications.

Mechanisms and immunogenicity of nsPEF-induced cell death in B16F10 melanoma tumors.

Accumulating data indicates that some cancer treatments can restore anticancer immunosurveillance through the induction of tumor immunogenic cell death (ICD). Nanosecond pulsed electric fields (nsPEF) have been shown to efficiently ablate melanoma tumors. In this study we investigated the mechanisms and immunogenicity of nsPEF-induced cell death in B16F10 melanoma tumors. Our data show that in vitro nsPEF (20-200, 200-ns pulses, 7 kV/cm, 2 Hz) caused a rapid dose-dependent cell death which was not accompanied by caspase activation or PARP cleavage. The lack of nsPEF-induced apoptosis was confirmed in vivo in B16F10 tumors. NsPEF also failed to trigger ICD-linked responses such as necroptosis and autophagy. Our results point at necrosis as the primary mechanism of cell death induced by nsPEF in B16F10 cells. We finally compared the antitumor immunity in animals treated with nsPEF (750, 200-ns, 25 kV/cm, 2 Hz) with animals were tumors were surgically removed. Compared to the naïve group where all animals developed tumors, nsPEF and surgery protected 33% (6/18) and 28.6% (4/14) of the animals, respectively. Our data suggest that, under our experimental conditions, the local ablation by nsPEF restored but did not boost the natural antitumor immunity which stays dormant in the tumor-bearing host.

Direct crystal formation from micronized bone and lactic acid: The writing on the wall for calcium-containing crystal pathogenesis in osteoarthritis?

INTRODUCTION: Pathological calcium-containing crystals accumulating in the joints, synovial fluid, and soft tissues are noted in most elderly patients, yet arthritic crystal formation remains idiopathic. Interestingly, elevated lactic acid and bone erosion are frequently among the comorbidities and clinical features of patients with highest incidence of crystal arthropathies. This work shows that bone particulates (modeling bone erosion) dissolve in lactic acid and directly generate crystals, possibly presenting a mechanism for crystal accumulation in osteoarthritis. METHODS AND RESULTS: Micronized human bone (average particle size of 160 µm x 79 µm) completely dissolved in lactic acid in 48 hours, and in synovial fluid with 500 mMol lactic acid in 5 days, generating birefringent rhomboid and rod-shaped crystals. SEM analysis with energy dispersive x-ray spectroscopy of these crystals showed average dimensions of around 2 µm x 40 µm, which contained oxygen, calcium and phosphorous at 8.64:1.85:1. Raman spectroscopy of the generated crystals further showed 910/cm and 1049/cm peaks, aligning with calcium oxalate monohydrate and calcium pyrophosphate, respectively. CONCLUSIONS: This work shows that lactic acid and micronized mineralized bone together directly generate calcium-containing crystals. These observations may provide insights into the elusive etiology of arthritis with crystal involvement, possibly indicating lactic acid as a clinical target for treatment.

VEGF-B electrotransfer mediated gene therapy induces cardiomyogenesis in a rat model of cardiac ischemia.

Atherosclerosis induced myocardial infarction (MI) continues to be a major public health concern. Regenerative therapies that restore cardiac muscle cells are largely absent. The rate of cardiomyogenesis in adults is insufficient to compensate for MI damage. In this study, we explored the capacity of a gene therapy approach to promote cardiomyogenesis. We hypothesized that VEGF-B, critical during fetal heart development, could promote cardiomyogenesis in adult ischemic hearts. Gene electrotransfer (GET), a physical method of in vivo gene delivery, was adapted to the rat model of MI. Favorable pulsing parameters were then used for delivery of pVEGF-B and compared to a sham control in terms of infarct size, cardiomyocyte proliferation and presence of new cardiomyocytes. Ki67 immunoreactivity was used for proliferation analysis. Newly synthetized DNA was labeled with BrdU to identify new cells post-infarction. Cardiac troponin co-localization indicated proliferating and new cardiomyocytes histologically. Eight weeks post-treatment, GET pVEGF-B treated hearts had significantly smaller infarcts than the sham control group (p < 0.04). Proliferating and new cardiomyocytes were only present in the GET of pVEGF-B group, and absent in the controls. In summary, GET pVEGF-B promoted cardiomyogenesis post-MI, demonstrating for the first time direct evidence of myocardial regeneration post-infarction.

Pneumatospinning of collagen microfibers from benign solvents.

INTRODUCTION: Current collagen fiber manufacturing methods for biomedical applications, such as electrospinning and extrusion, have had limited success in clinical translation, partially due to scalability, cost, and complexity challenges. Here we explore an alternative, simplified and scalable collagen fiber formation method, termed 'pneumatospinning,' to generate submicron collagen fibers from benign solvents. METHODS AND RESULTS: Clinical grade type I atelocollagen from calf corium was electrospun or pneumatospun as sheets of aligned and isotropic fibrous scaffolds. Following crosslinking with genipin, the collagen scaffolds were stable in media for over a month. Pneumatospun collagen samples were characterized using Fourier-transform infrared spectroscopy, circular dichroism, mechanical testing, and scanning electron microscopy showed consistent fiber size and no deleterious chemical changes to the collagen were detected. Pneumatospun collagen had significantly higher tensile strength relative to electrospun collagen, with both processed from acetic acid. Stem cells cultured on pneumatospun collagen showed robust cell attachment and high cytocompatibility. Using DMSO as a solvent, collagen was further co-pneumatospun with poly(d,l-lactide) to produce a blended microfibrous biomaterial. CONCLUSIONS: Collagen microfibers are shown for the first time to be formed using pneumatospinning, which can be collected as anisotropic or isotropic fibrous grafts. Pneumatospun collagen can be made with higher output, lower cost and less complexity relative to electrospinning. As a robust and rapid method of collagen microfiber synthesis, this manufacturing method has many applications in medical device manufacturing, including those benefiting from anisotropic microstructures, such as ligament, tendon and nerve repair, or for applying microfibrous collagen-based coatings to other materials.

Human placenta hydrogel reduces scarring in a rat model of cardiac ischemia and enhances cardiomyocyte and stem cell cultures.

INTRODUCTION: Xenogeneic extracellular matrix (ECM) hydrogels have shown promise in remediating cardiac ischemia damage in animal models, yet analogous human ECM hydrogels have not been well development. An original human placenta-derived hydrogel (hpECM) preparation was thus generated for assessment in cardiomyocyte cell culture and therapeutic cardiac injection applications. METHODS AND RESULTS: Hybrid orbitrap-quadrupole mass spectrometry and ELISAs showed hpECM to be rich in collagens, basement membrane proteins, and regenerative growth factors (e.g. VEGF-B, HGF). Human induced pluripotent stem cell (iPSC)-derived cardiomyocytes synchronized and electrically coupled on hpECM faster than on conventional cell culture environments, as validated by intracellular calcium measurements. In vivo, injections using biotin-labeled hpECM confirmed its spatially discrete localization to the myocardium proximal to the injection site. hpECM was injected into rat myocardium following an acute myocardium infarction induced by left anterior descending artery ligation. Compared to sham treated animals, which exhibited aberrant electrical activity and larger myocardial scars, hpECM injected rat hearts showed a significant reduction in scar volume along with normal electrical activity of the surviving tissue, as determined by optical mapping. CONCLUSION: Placental matrix and growth factors can be extracted as a hydrogel that effectively supports cardiomyocytes in vitro, and in vivo reduces scar formation while maintaining electrophysiological activity when injected into ischemic myocardium. STATEMENT OF SIGNIFICANCE: This is the first report of an original extracellular matrix hydrogel preparation isolated from human placentas (hpECM). hpECM is rich in collagens, laminin, fibronectin, glycoproteins, and growth factors, including known pro-regenerative, pro-angiogenic, anti-scarring, anti-inflammatory, and stem cell-recruiting factors. hpECM supports the culture of cardiomyocytes, stem cells and blood vessels assembly from endothelial cells. In a rat model of myocardial infarction, hpECM injections were safely deliverable to the ischemic myocardium. hpECM injections repaired the myocardium, resulting in a significant reduction in infarct size, more viable myocardium, and a normal electrophysiological contraction profile. hpECM thus has potential in therapeutic cardiovascular applications, in cellular therapies (as a delivery vehicle), and is a promising biomaterial for advancing basic cell-based research and regenerative medicine applications.

Recellularized human dermis for testing gene electrotransfer ex vivo.

Gene electrotransfer (GET) is a proven and valuable tool for in vivo gene delivery to a variety of tissues such as skin, cardiac muscle, skeletal muscle, and tumors, with controllable gene delivery and expression levels. Optimizing gene expression is a challenging hurdle in preclinical studies, particularly for skin indications, due to differences in electrical conductivity of animal compared to human dermis. Therefore, the goal of this study was to develop an ex vivo model for GET using recellularized human dermis to more closely mimic human skin. Decellularized human dermis (DermACELL(®)) was cultured with human dermal fibroblasts and keratinocytes for 4 weeks. After one week of fibroblast culture, fibroblasts infiltrated and dispersed throughout the dermis. Air-liquid interface culture led to epithelial cell proliferation, stratification and terminal differentiation with distinct basal, spinous, granular and cornified strata. Firefly luciferase expression kinetics were evaluated after GET of recellularized constructs for testing gene delivery parameters to skin in vitro. Elevated luciferase expression persisted up to a week following GET compared to controls without electrotransfer. In summary, recellularized dermis structurally and functionally resembled native human skin in tissue histological organization and homeostasis, proving an effective 3D human skin model for preclinical gene delivery studies.

Enhanced chemoresistance of squamous carcinoma cells grown in 3D cryogenic electrospun scaffolds.

It is critically important to study head and neck squamous cell carcinoma tumorigenic mechanisms in order to gain a better understanding of tumor development, progression, and treatment. Unfortunately, a representative three-dimensional (3D) model for these evaluations has yet to be developed. The purpose of this study was to replicate tumor extracellular matrix (ECM) morphology utilizing electrospinning technology. First, the tumor ECM was evaluated by decellularizing tumor samples and analyzing the fibrous structure of the ECM by scanning electron microscopy. Cryogenic electrospun silk scaffolds were then fabricated to mimic the tumor ECM, and were found to be similar in fiber orientation and fiber dimensions to the native tumor ECM. Tumor cells were cultured on these ECM mimicking scaffolds and compared to an in vivo model of the same derivative human tumor in terms of proliferation and differentiation. The tumor cells in the 3D model show similar phenotypes to those found in vivo, contrasting to the same cells grown in two-dimensional (2D) culture. The sensitivity of the tumor cells to paclitaxel was compared between 2D culture and 3D culture. The results indicate that increased drug concentrations, orders of magnitude higher than the IC90 for 2D culture, had minimal effects on HN12 cell viability in the 3D model. In conclusion, an in vitro tumor model has been developed that will allow for a better understanding of tumor biology and aid chemotherapeutic drug development and accurate evaluation of drug efficacy.

Low-temperature electrospun silk scaffold for in vitro mucosal modeling.

Electrospinning is often used to create scaffolding as a biomimetic of the extracellular matrix of tissues. A frequent limitation of this technique for three-dimensional tissue modeling is poor cell infiltration throughout the void volume of scaffolds. Here, we generated low-temperature electrospun silk scaffolds and compared these with conventional electrospun silk scaffolds in terms of mechanical properties, void volume, cell infiltration, cell viability, and potential to support mucosal models under three-dimensional culture conditions. Low-temperature electrospun silk scaffolds supported fibroblast attachment and infiltration throughout the volume of the scaffolds, while conventional electrospun scaffolds exhibited limited cell infiltration with fibroblasts attaching exclusively to the seeding surface of the scaffolds. The porosity of low-temperature electrospun scaffolds was 93% compared with 88% of conventional electrospun silk scaffolds. Uniaxial tensile testing showed a 3.5-fold reduction in strength of low-temperature electrospun silk compared with the conventional in terms of peak stress and modulus but no significant change in strain at break. Mucosal modeling with fibroblast-keratinocyte or fibroblast-carcinoma cocultures showed similar results, with cell infiltration occurring only in low-temperature electrospun scaffolds. Cell viability was confirmed using live/dead staining after 21 days in culture. Furthermore, low-temperature electrospun silk scaffolds were able to support keratinocyte differentiation, as judged by involucrin immunoreactivity. The low-temperature electrospun silk scaffold that we have developed eliminates the limitation of electrospun silk scaffolds in terms of cell infiltration and, therefore, can potentially be used for a wide range of tissue engineering purposes ranging from in vitro tissue modeling to in vivo tissue regeneration purposes.