Surface Damage Influences the JKR Contact Mechanics of Glassy Low-Molecular-Weight Polystyrene Films.

Using a surface forces apparatus (SFA), we quantitatively study the influence of surface damage on the contact mechanics of self-mated glassy polystyrene (PS) films. We use the SFA to measure the contact radius, surface profile, and normal force between the films, including the adhesion force. The molecular weight (MW) of the polymer influences the repeatability of the adhesion measurements and the effective surface energy calculated using the Johnson-Kendall-Roberts (JKR) theory. For low-MW PS (MW = 2.33 kDa), the effective surface energy increases over repeated adhesion cycles as the films become progressively damaged. For high-MW PS (MW = 280 kDa), the effective surface energy is constant over repeated adhesion cycles, but hysteresis is still present, manifested in a smaller contact radius during compression of the surfaces than during separation. Our results demonstrate that while the JKR theory is appropriate for describing the contact mechanics of glassy polymer thin films on layered elastic substrates, the contact mechanics of low-MW polymer films can be complicated by surface damage to the films.

Automated Measurement of Spatially Resolved Hair-Hair Single Fiber Adhesion.

The adhesion force between individual human hair fibers in a crosshair geometry was measured by observing their natural bending and adhesive jumps out of contact, using optical video microscopy. The hair fibers' natural elastic responses, calibrated by measuring their natural resonant frequencies, were used to measure the forces. Using a custom-designed, automated apparatus to measure thousands of individual hair-hair contacts along millimeter length scales of hair, it was found that a broad, yet characteristic, spatially variant distribution in adhesion force is measured on the 1 to 1000 nN scale for both clean and conditioner-treated hair fibers. Comparison between the measured adhesion forces and adhesion forces modeled from the hairs' surface topography (measured using confocal laser profilometry) shows they have a good order-of-magnitude agreement and have similar breadth and shape. The agreement between the measurements and the model suggests, perhaps unsurprisingly, that hair-hair adhesion is governed, to a first approximation, by the unique surface structure of the hairs' cuticles and, therefore, the large distribution in local mean curvature at the various individual contact points along the hairs' lengths. We posit that haircare products could best control the surface properties (or at least the adhesive properties) between hairs by directly modifying the hair surface microstructure.

Time-Dependent Physicochemical Changes of Carbonate Surfaces from SmartWater (Diluted Seawater) Flooding Processes for Improved Oil Recovery.

Over the past few decades, field- and laboratory-scale studies have shown enhancements in oil recovery when reservoirs, which contain high-salinity formation water (FW), are waterflooded with modified-salinity salt water (widely referred to as the low-salinity, dilution, or SmartWater effect for improved oil recovery). In this study, we investigated the time dependence of the physicochemical processes that occur during diluted seawater (i.e., SmartWater) waterflooding processes of specific relevance to carbonate oil reservoirs. We measured the changes to oil/water/rock wettability, surface roughness, and surface chemical composition during SmartWater flooding using 10-fold-diluted seawater under mimicked oil reservoir conditions with calcite and carbonate reservoir rocks. Distinct effects due to SmartWater flooding were observed and found to occur on two different timescales: (1) a rapid (<15 min) increase in the colloidal electrostatic double-layer repulsion between the rock and oil across the SmartWater, leading to a decreased oil/water/rock adhesion energy and thus increased water wetness and (2) slower (>12 h to complete) physicochemical changes of the calcite and carbonate reservoir rock surfaces, including surface roughening via the dissolution of rock and the reprecipitation of dissolved carbonate species after exchanging key ions (Ca2+, Mg2+, CO32-, and SO42- in carbonates) with those in the flooding SmartWater. Our experiments using crude oil from a carbonate reservoir reveal that these reservoir rock surfaces are covered with organic-ionic preadsorbed films (ad-layers), which the SmartWater removes (detaches) as flakes. Removal of the organic-ionic ad-layers by SmartWater flooding enhances oil release from the surfaces, which was found to be critical to increasing the water wetness and significantly improving oil removal from carbonates. Additionally, the increase in water wetness is further enhanced by roughening of the rock surfaces, which decreases the effective contact (interaction) area between the oil and rock interfaces. Furthermore, we found that the rate of these slower physicochemical changes to the carbonate rock surfaces increases with increasing temperature (at least up to an experimental temperature of 75 °C). Our results suggest that the effectiveness of improved oil recovery from SmartWater flooding depends strongly on the formation of the organic-ionic ad-layers. In oil reservoirs where the ad-layer is fully developed and robust, injecting SmartWater would lead to significant removal of the ad-layer and improved oil recovery.

Triple Function Lubricant Additives Based on Organic-Inorganic Hybrid Star Polymers: Friction Reduction, Wear Protection, and Viscosity Modification.

Polymer-based lubricant additives for friction reduction, wear protection, or viscosity improvement have been widely studied. However, single additives achieving all three functions are rare. To address this need, we have explored the combination of polymer topology with organic-inorganic hybrid chemistry to simultaneously vary the temperature- and shear-dependent properties of polymer additives in solution and at solid surfaces. A topological library of lubricant additives, based on statistical copolymers of stearyl methacrylate and methyl methacrylate, ranging from linear to branched star architectures, was prepared using ruthenium-catalyzed controlled radical polymerization. Control over the polymerization yielded additives with low dispersity and comparable molecular weights, allowing evaluation of the influence of polymer architecture on friction reduction, wear protection, and bulk viscosity improvement in a commercial base oil (Yubase 4). Structure-performance relationships for these functions were assessed by a combination of a high-speed surface force apparatus (HS-SFA) experiments, wear track profilometry, quartz crystal microbalance analysis, and solution viscometry. The custom-built HS-SFA provides a unique experimental environment to measure the boundary lubrication performance under extreme shear rates (≈107 s-1) for prolonged times (24 h), mimicking the extreme conditions of automotive applications. These experiments revealed that the performance of the additives as boundary lubricants and wear protectants scales with the degree of branching. The branched architectures prohibit ordering of the additives in thin films under high-load conditions, leading to a thicker absorbed polymer brush boundary layer and therefore enhanced film fluidity and lubricity. Additionally, star polymers with increasing arm number lead to bulk viscosity modification, reflected by a significant increase in the viscosity index compared to the commercial base oil. Although outperformed by linear polymers for bulk viscosity improvement, the (hybrid) star polymers successfully combine the three distinct lubricant additive functions: friction reduction, wear protection, and bulk viscosity improvement-in a single polymeric structure. It should also be noted that, judging from HS-SFA experiments, hybrid stars carrying a silicate-based core outperform their fully organic analogues as boundary lubricants. The enhanced performance is most likely driven by attractive forces between the silicate cores and the employed metallic surfaces. Combining three function in one minimizes formulation complexity and thus opens a route to fundamentally understand and formulate key design parameters for the development of novel multifunction lubricant additives.

Influence of Humidity on Grip and Release Adhesion Mechanisms for Gecko-Inspired Microfibrillar Surfaces.

Geckos have developed foot pads that allow them to maintain their unique climbing ability despite vast differences of surfaces and environments, from dry desert to humid rainforest. Likewise, successful gecko-inspired mimics should exhibit adhesive and frictional performance across a similarly diverse range of climates. In this work, we focus on the effect of relative humidity (RH) on the "frictional-adhesion" behavior of gecko-inspired adhesive pads. A surface forces apparatus was used to quantitatively measure adhesion and friction forces of a microfibrillar cross-linked polydimethylsiloxane surface against a smooth hemispherical glass disk at varying relative humidity, from 0 to 100% (including fully submerged under water). Geometrically anisotropic tilted half-cylinder microfibers yield a "grip state" (high adhesion and friction forces after shearing along the tilt of the fibers, Fad+ and F∥+) and a "release state" (low adhesion and friction after shearing against the tilt of the fibers, Fad- and F∥-). By appropriate control of the loading path, this allows for transition between strong attachment and easy detachment. Changing the preload and shear direction gives rise to differences in the effective contact area at each fiber and the microscale and nanoscale structure of the contact while changing the relative humidity results in differences in the relative contributions of van der Waals and capillary forces. In combination, both effects lead to interesting trends in the adhesion and friction forces. At up to 75% RH, the grip state adhesion force remains constant and the ratio of grip to release adhesion force does not drop below 4.0. In addition, the friction forces F∥+ and F∥- and the release state adhesion force Fad- exhibit a maximum at intermediate relative humidity between 40% and 75%.

Real-time intermembrane force measurements and imaging of lipid domain morphology during hemifusion.

Membrane fusion is the core process in membrane trafficking and is essential for cellular transport of proteins and other biomacromolecules. During protein-mediated membrane fusion, membrane proteins are often excluded from the membrane-membrane contact, indicating that local structural transformations in lipid domains play a major role. However, the rearrangements of lipid domains during fusion have not been thoroughly examined. Here using a newly developed Fluorescence Surface Forces Apparatus (FL-SFA), migration of liquid-disordered clusters and depletion of liquid-ordered domains at the membrane-membrane contact are imaged in real time during hemifusion of model lipid membranes, together with simultaneous force-distance and lipid membrane thickness measurements. The load and contact time-dependent hemifusion results show that the domain rearrangements decrease the energy barrier to fusion, illustrating the significance of dynamic domain transformations in membrane fusion processes. Importantly, the FL-SFA can unambiguously correlate interaction forces and in situ imaging in many dynamic interfacial systems.

Stick-slip friction of gecko-mimetic flaps on smooth and rough surfaces.

The discovery and understanding of gecko 'frictional-adhesion' adhering and climbing mechanism has allowed researchers to mimic and create gecko-inspired adhesives. A few experimental and theoretical approaches have been taken to understand the effect of surface roughness on synthetic adhesive performance, and the implications of stick-slip friction during shearing. This work extends previous studies by using a modified surface forces apparatus to quantitatively measure and model frictional forces between arrays of polydimethylsiloxane gecko footpad-mimetic tilted microflaps against smooth and rough glass surfaces. Constant attachments and detachments occur between the surfaces during shearing, as described by an avalanche model. These detachments ultimately result in failure of the adhesion interface and have been characterized in this study. Stick-slip friction disappears with increasing velocity when the flaps are sheared against a smooth silica surface; however, stick-slip was always present at all velocities and loads tested when shearing the flaps against rough glass surfaces. These results demonstrate the significance of pre-load, shearing velocity, shearing distances, commensurability and shearing direction of gecko-mimetic adhesives and provide us a simple model for analysing and/or designing such systems.

Effects of molecular weight of grafted hyaluronic acid on wear initiation.

Hyaluronic acid (HA) of different molecular weights (Mw) was grafted onto mica surfaces to study the effects of Mw on the conformation and wear protection properties of a grafted HA (gHA) layer in lubricin (LUB) and bovine synovial fluid (BSF) using a surface forces apparatus. The Mw of gHA had significant effects on the wear pressure (Pw), at which point the wear initiates. Increasing the gHA Mw from 51 to 2590kDa increased Pw from 4 to 8MPa in LUB and from 15 to 31MPa in BSF. The 2590kDa gHA in BSF had the best wear protection (Pw∼31MPa), even though it exhibited the highest friction coefficient (µâˆ¼0.35), indicating that a low µ does not necessarily result in good wear protection, as is often assumed. The normal force profile indicated that BSF confines the gHA structure, making it polymer brush-like, commonly considered as an excellent structure for boundary lubrication.