Microbial contamination and metabolite exposure assessment during waste and recyclable material collection.

Waste workers are exposed to bioaerosols when handling, lifting and dumping garbage. Bioaerosol exposure has been linked to health problems such as asthma, airway irritant symptoms, infectious, gastrointestinal and skin diseases, and cancer. Our objective was to characterize the exposure of urban collectors and drivers to inhalable bioaerosols and to measured the cytotoxic effect of air samples in order to evaluate their health risk. Personal and ambient air sampling were conducted during the summer of 2019. Workers from 12 waste trucks collecting recyclables, organic waste or compost were evaluated. Bacteria and fungi were cultured, molecular biology methods were used to detect microbial indicators, cytotoxic assays were performed and endotoxins and mycotoxins were quantified. Domestic waste collectors were exposed to concentrations of bacteria and endotoxins above the recommended limits, and Aspergillus section Fumigati was detected at critical concentrations in their breathing zones. Cytotoxic effects were observed in many samples, demonstrating the potential health risk for these workers. This study establishes evidence that waste workers are exposed to microbial health risks during collection. It also demonstrates the relevance of cytotoxic assays in documenting the general toxic risk found in air samples. Our results also suggest that exposures differ depending on the type of waste, job title and discharge/unloading locations.

Microbial contamination in waste collection: Unveiling this Portuguese occupational exposure scenario.

Previous studies anticipated that microorganisms and their metabolites in waste will increase as a consequence of a decreased collection frequency and due to differences in what kind of waste is bagged before collection leading to an increased exposure of workers handling the waste. This study aim was to investigate the microbial contamination present in the waste collection trucks (WCT) and in the support facilities (waste collection station - WCS). It was applied a multi-approach protocol using active (air sampling by impingement and impaction) and passive (surface swabs, electrostatic dust cloths and settled dust) sampling methods. The screening of azole-resistance, the investigation of mycotoxins and the assessment of the elicited biological responses in vitro were also carried out aiming recognizing the possible health effects of waste collection drivers. SARS-CoV-2 detection was also performed. In WCS only air samples had contamination in all the four sampling sites (canteen, operational removal core, operational removal center, and administrative service). Among all the analyzed matrices from the WCT a higher percentage of total bacterial counts and Gram-was detected in swabs (66.93%; 99.36%). In WCS the most common species were Penicillium sp. (43.98%) and Cladosporium sp. (24.68%), while on WCT Aspergillus sp. (4.18%) was also one of the most found. In the azole resistance screening Aspergillus genera was not observed in the azole-supplemented media. SARS-CoV-2 was not detected in any of the environmental samples collected, but Aspergillus section Fumigati was detected in 5 samples. Mycotoxins were not detected in EDC from WCS, while in WCT they were detected in filters (N = 1) and in settled dust samples (N = 16). In conclusion, our study reveals that a comprehensive sampling approach using active and passive sampling (e.g. settled dust sampling for a representative mycotoxin evaluation) and combined analytic methods (i.e., culture-based and molecular) is an important asset in microbial exposure assessments. Concerning the waste collection exposure scenario, the results of this study unveiled a complex exposure, particularly to fungi and their metabolites. Aspergillus section Fumigati highlight the significance of targeting this section in the waste management industry as an indicator of occupational health risk.

Algorithm to assess the presence of Aspergillus fumigatus resistant strains: The case of Norwegian sawmills.

Association between selection pressure caused by the use of azole fungicides in sawmills and the development of fungal resistance has been described. The aim of this study was to implement an algorithm to assess the presence of Aspergillus section Fumigati resistant strains in sawmills.Eighty-six full-shift inhalable dust samples were collected from eleven industrial sawmills in Norway. Different culture media were used and molecular identification to species level in Aspergillus section Fumigati was done by calmodulin sequencing and TR34/L98H and TR46/Y121F/T289A mutations were screened by real-time PCR assay and confirmed by cyp51A sequencing. Six Fumigati isolates were identified as A. fumigatus sensu stricto and two of these grew on azole-supplemented media and were further analyzed by real-time PCR. One was confirmed to be a TR34/L98H mutant.The obtained results reinforce the need to assess the presence of A. fumigatus sensu stricto resistant isolates at other workplaces with fungicide pressure.

Occupational exposure to Aspergillus section Fumigati: Tackling the knowledge gap in Portugal.

Aspergillus section Fumigati is one of the sections of the Aspergillus genus most often associated with respiratory symptoms. The azole-resistant clinical isolates in this section have been widely described worldwide. More recently, the environmental origin of azole resistance has been correlated with the development of fungal diseases and therapeutic failure. This paper presents a review of several studies performed in Portuguese occupational environments focusing on occupational exposure to this section and give guidance to exposure assessors and industrial hygienists to ensure an accurate exposure assessment. Future studies should tackle the limitations concerning the assessment of occupational exposure to the Fumigati section, in order to allow the implementation of adequate risk management measures. In the light of the results of previous studies, the following approach is proposed to ensure an accurate exposure assessment: a) a combination of active and passive sampling methods appropriate to each occupational environment; b) the use, in parallel, of culture-based methods and molecular tools to overcome the limitations of each method; c) evaluation of the mycobiota azole resistance profile; and d) consider the possible simultaneous presence of mycotoxins produced by this section when assessing workers occupational exposure. In sum, preventing the development of fungal strains resistant to azoles will only be achieved with a holistic approach. An adequate "One Health approach" can contribute positively to concerted actions in different sectors, by reducing the use of fungicides through the introduction of crops and agricultural practices that prevent fungal colonization, and by promoting the rational use of antifungal drugs in human and animal health.

Bioburden contamination and Staphylococcus aureus colonization associated with firefighter's ambulances.

Ambulance vehicles are an essential part of emergency clinical services. Bioburden control in ambulances, through cleaning and disinfection, is crucial to minimize hospital-acquired infections, cross contamination and exposure of patients and ambulances' crew. In Portugal, firefighter crews are responsible, besides fire extinction, for first aid and urgent pre-hospital treatment. This study assessed the bioburden in Portuguese firefighters' ambulances with a multi-approach protocol using active and passive sampling methods. Fungal resistance profile and mycotoxins detection in ambulances' ambient, and S. aureus (SA) prevalence and resistance profile in ambulances' ambient and colonization in workers were also investigated. Toxigenic fungi with clinical relevance, namely Aspergillus section Fumigati, were found on ambulance's air in the hazardous dimension range. Interestingly, surface contamination was higher after cleaning in several sampling sites. Prevalence of S. aureus was 3% in environmental samples, of which 2% were methicillin-sensitive (MSSA) and 1% methicillin-resistant (MRSA). About 2.07 fungal species were able to grow in at least one azole, ranging from one (44% samples) to five (6% samples) species in each azole. Mycotoxins were detected in mops and electrostatic dust cloths. Colonization by S. aureus in the firefighter crew was observed with a high associated prevalence, namely 48%, with a 24% prevalence of MSSA (8/33) and 21% of MRSA (7/33). Additional studies are needed to determine the potential risk of infection transmission between different vehicle fleets and under varying conditions of use. This will strengthen the paramedic sector's mission to save lives without putting their own health and safety at risk.

Aspergillus collected in specific indoor settings: their molecular identification and susceptibility pattern.

Exposure to Aspergillus conidia is an increased risk factor for the development of respiratory symptoms. The emergence of azole resistance in Aspergillus fumigatus is a major concern for the scientific community. The aim of this study was to perform the molecular identification of Aspergillus species collected from different occupational and non-occupational indoor settings and to study the azole susceptibility profile of the collected Fumigati isolates. The selected Aspergillus isolates were identified as belonging to the sections Fumigati, Nigri Versicolores, Terrei, Clavati and Nidulantes. All the Aspergillus fumigatus were screened for azole resistance using an agar media supplemented with itraconazole, voriconazole and posaconazole. None of the tested isolates showed resistance to those azoles. Knowledge of Aspergillus epidemiology in specific indoor environments allows a better risk characterization regarding Aspergillus burden. This study allowed the analysis of the molecular epidemiology and the determination of the susceptibility pattern of Aspergillus section Fumigati found in the studied indoor settings.

Settled dust assessment in clinical environment: useful for the evaluation of a wider bioburden spectrum.

The collection and analysis of settled dust samples from indoor environments has become one of several environmental sampling methods used to assess bioburden indoors. The aim of the study was to characterize the bioburden in vacuumed settled dust from 10 Primary Health Care Centers by culture based and molecular methods. Results for bacterial load ranged from 1 to 12 CFU.g-1 of dust and Gram-negative bacteria ranged between 1 to 344 CFU.g-1 of dust. Fungal load ranged from 0 CFU.g-1 of dust to uncountable. Aspergillus section Fumigati was detected in 4 sampling sites where culture base-methods could not identify this section. Mucorales (Rhizopus sp.) was observed on 1 mg/L voriconazole. Three out of 10 settled dust samples were contaminated by mycotoxins. Settled dust sampling coupled with air sampling in a routine way might provide useful information about bioburden exposure.

Assessment of the microbial contamination of mechanical protection gloves used on waste sorting industry: A contribution for the risk characterization.

In Portugal, mechanical protection gloves (MPG) are of mandatory use and during their use sweat is released and, consequently, the humidity of the material increases leading to conditions favorable to the growth of microorganisms. However, no studies have been conducted in MPG to assess the bioburden. This study intended to determine the bioburden present in MPG and their biological effects, and to discuss the possibility to use MPG as a passive method to assess occupational exposure to microbial contamination. Fungal burden was characterized through molecular tools for fungal toxigenic species, and antifungal resistance and mycotoxins profiles were determined. Cell viability was determined in swine kidney (SK) monolayer and hepatocellular carcinoma (Hep G2) cell lines. All MPG samples presented Gram-negative bacteria. The fungal contamination ranged from 0 CFU.m-2 in both MEA and DG18, to 5.09 × 106 and 2.75 × 106 and the most commonly fungi found was Aspergillus spp. (50.46%). Azole resistant Aspergillus sections were found in azole supplemented media. Aspergillus sections (Circumdati, Flavi, Fumigati and Versicolores) were detected by molecular tools in 66 out of 67 samples. The most reported mycotoxin was mycophenolic acid (89.6%). HepG2 cells appear to be more sensitive to MPG contamination, with high cytotoxicity (IC50 < 0.05 mm2/ml) observed for 18 out of 57 gloves. MPG can be used in passive sampling to assess occupational exposure to bioburden in waste sorting industries and contribute for risk characterization. Some contaminants of MPG had cytotoxic potential and affected the biology of hepatic cells more than renal cells.

Cytotoxic effect of filtering respiratory protective devices from the waste sorting industry: is in vitro toxicology useful for risk characterization?

The use of Filtering Respiratory Protective Devices (FRPD) is mandatory in Portugal to protect workers from the waste industry of harmful exposures. Deleterious health effects of exposure to bioburden via inhalation and/or ingestion include respiratory symptoms and nephrotoxicity. Between January and February 2019, 118 FRPD samples were collected in one waste sorting industry and characterized regarding microbial contamination and cytotoxicity, defined as cell metabolic activity, through the MTT colorimetric assay (3-(4,5-dimethylthiazol-2-yl)-2,5- diphenyltetrazolium bromide). Cytotoxic effect was classified according to percentage of extinction values with respect to the control group, as follows: absent (≥90); low (80%-90%, +); medium (60%-79%, ++); and high (below 60%, +++). For 113 samples the MTT assay revealed a cytotoxic effect in A549 cells, of which 81 presented high cytotoxicity. In SK cells, a cytotoxic effect was observed in 56 samples, of which five displayed a high cytotoxic effect. Several moderate (p < 0.05) to strong (p < 0.01) correlations were found between higher bacterial and fungal counts both in interior layers (fungi and bacteria) and in exhalation valves (fungi) of FRPD samples and reduced cell metabolic activity of SK cells. On the basis of the obtained results for the cytotoxic effect of FRPD samples on two different cells lines, it was determined that A549 cells exhibited a cytotoxic effect for a higher number of FRPD, whereas the SK cells model correlated better with the other assessed parameters, namely, bacterial and fungal counts and conditions of FRPD use. Although the results are not conclusive on the most appropriate cell line to assess FRPD cytotoxicity, they reinforce the importance of in vitro toxicology in exposure assessments to determine the cytotoxicity of mixtures of contaminants, for better risk characterization and selection of appropriate risk management measures.

Exposure assessment in one central hospital: A multi-approach protocol to achieve an accurate risk characterization.

The bioburden in a Hospital building originates not only from patients, visitors and staff, but is also disseminated by several indoor hospital characteristics and outdoor environmental sources. This study intends to assess the exposure to bioburden in one central Hospital with a multi-approach protocol using active and passive sampling methods. The microbial contamination was also characterized through molecular tools for toxigenic species, antifungal resistance and mycotoxins and endotoxins profile. Two cytotoxicity assays (MTT and resazurin) were conducted with two cell lines (Calu-3 and THP-1), and in vitro pro-inflammatory potential was assessed in THP-1 cell line. Out of the 15 sampling locations 33.3% did not comply with Portuguese legislation regarding bacterial contamination, whereas concerning fungal contamination 60% presented I/O > 1. Toxigenic fungal species were observed in 27% of the sampled rooms (4 out of 15) and qPCR analysis successfully amplified DNA from the Aspergillus sections Flavi and Fumigati, although mycotoxins were not detected. Growth of distinct fungal species was observed on Sabouraud dextrose agar with triazole drugs, such as Aspergillus section Versicolores on 1 mg/L VORI. The highest concentrations of endotoxins were found in settled dust samples and ranged from 5.72 to 23.0 EU.mg-1. While a considerable cytotoxic effect (cell viability < 30%) was observed in one HVAC filter sample with Calu-3 cell line, it was not observed with THP-1 cell line. In air samples a medium cytotoxic effect (61-68% cell viability) was observed in 3 out of 15 samples. The cytokine responses produced a more potent average cell response (46.8 ± 12.3 ρg/mL IL-1ß; 90.8 ± 58.5 ρg/mL TNF-α) on passive samples than air samples (25.5 ± 5.2 ρg/mL IL-1ß and of 19.4 ± 5.2 ρg/mL TNF-α). A multi-approach regarding parameters to assess, sampling and analysis methods should be followed to characterize the biorburden in the Hospital indoor environment. This study supports the importance of considering exposure to complex mixtures in indoor environments.

Region-specific control of microglia by adenosine A2A receptors: uncoupling anxiety and associated cognitive deficits in female rats.

Epidemiologic studies have provided compelling evidence that prenatal stress, through excessive maternal glucocorticoids exposure, is associated with psychiatric disorders later in life. We have recently reported that anxiety associated with prenatal exposure to dexamethasone (DEX, a synthetic glucocorticoid) correlates with a gender-specific remodeling of microglia in the medial prefrontal cortex (mPFC), a core brain region in anxiety-related disorders. Gender differences in microglia morphology, the higher prevalence of anxiety in women and the negative impact of anxiety in cognition, led us to specifically evaluate cognitive behavior and associated circuits (namely mPFC-dorsal hippocampus, dHIP), as well as microglia morphology in female rats prenatally exposed to dexamethasone (in utero DEX, iuDEX). We report that iuDEX impaired recognition memory and deteriorated neuronal synchronization between mPFC and dHIP. These functional deficits are paralleled by microglia hyper-ramification in the dHIP and decreased ramification in the mPFC, showing a heterogeneous remodeling of microglia morphology, both postnatally and at adulthood in different brain regions, that differently affect mood and cognition. The chronic blockade of adenosine A2A receptors (A2A R), which are core regulators of microglia morphology and physiology, ameliorated the cognitive deficits, but not the anxiety-like behavior. Notably, A2A R blockade rectified both microglia morphology in the dHIP and the lack of mPFC-dHIP synchronization, further heralding their role in cognitive function.

Aspergillus spp. prevalence in Primary Health Care Centres: Assessment by a novel multi-approach sampling protocol.

Exposure to Aspergillus conidia may cause adverse effects on human health; however, no specific recommendations for routine assessments of Aspergillus in the clinical environment have been suggested so far. This study intended to determine the prevalence of Aspergillus in the clinical environment, focusing on ten Primary Health Care Centres (PHCC) through a novel multi-approach sampling protocol. Air and passive sampling, culture-based methods and a probe-based real-time assay for the detection of four clinically relevant Aspergillus sections were performed. Aspergillus spp. was observed in all PHCC, with highest prevalence on floor surface swabs (n=81) (18% on MEA; 6.94% on DG18). Regarding air samples (n=81), highest Aspergillus counts were found in the waiting room (94% MEA; 18% DG18), where Nigri was the most prevalent Aspergillus section. The use of a multi-approach sampling protocol to assess Aspergillus burden in the analysed PHCC has greatly contributed to risk characterization, highlighting the need to implement corrective measures in order to avoid fungal presence in those settings.

Filters from taxis air conditioning system: A tool to characterize driver's occupational exposure to bioburden?

Bioburden proliferation in filters from air conditioning systems of taxis represents a possible source of occupational exposure. The aim of this study was to determine the occurrence of fungi and bacteria in filters from the air conditioning system of taxis used for patient transportation and to assess the exposure of drivers to bioburden. Filters from the air conditioning systems of 19 taxis and 28 personal vehicles (used as controls) operating in three Portuguese cities including the capital Lisbon, were collected during the winter season. The occurrence and significance of bioburden detected in the different vehicles are reported and discussed in terms of colony-forming units (CFU) per 1 m2 of filter area and by the identification of the most frequently detected fungal isolates based on morphology. Azole-resistant mycobiota, fungal biomass, and molecular detection of Aspergillus species/strains were also determined. Bacterial growth was more prevalent in taxis (63.2%) than in personal vehicles (26.3%), whereas fungal growth was more prevalent in personal vehicles (53.6%) than in taxis (21.1-31.6%). Seven different azole-resistant species were identified in this study in 42.1% taxi filters. Levels of fungal biomass were above the detection limit in 63% taxi filters and in 75% personal vehicle filters. No toxigenic species were detected by molecular analysis in the assessed filters. The results obtained show that bioburden proliferation occurs widely in filters from the air conditioning systems of taxis, including the proliferation of azole-resistant fungal species, suggesting that filters should be replaced more frequently. The use of culture based-methods and molecular tools combined enabled an improved risk characterization in this setting.

Fungal burden exposure assessment in podiatry clinics from Ireland.

Fungi are amongst the bioaerosols of most importance, as indicated by the growing interest in this field of research. The aim was to characterize the exposure to fungal burden in podiatry clinics using culture-based and molecular methods. METHODS: Airborne fungi were collected using an impaction air sampler and surface samples were also performed. Fourteen air samples were collected for direct detection of fungal DNA from filamentous fungi and dermatophytes. Overall, 63.6 % of the evening samples and 46 % of the morning samples surpassed the threshold values (150 CFU/m3). Molecular detection, by real time PCR, of the target fungal species/strains (Aspergillus and Stachybotrys species) was negative for all samples collected. Trichophyton rubrum was detected by PCR analysis in one DNA sample collected on day six. Results suggest the use of both culture-based and molecular methodologies are desirable for a complete evaluation of fungal burden in this particular health care setting.

Fungal contamination in green coffee beans samples: A public health concern.

Studies on the microbiology of coffee cherries and beans have shown that the predominant toxigenic fungal genera (Aspergillus and Penicillium) are natural coffee contaminants. The aim of this study was to investigate the distribution of fungi in Coffea arabica L. (Arabica coffee) and Coffea canephora L. var. robusta (Robusta coffee) green coffee samples obtained from different sources at the pre-roasting stage. Twenty-eight green coffee samples from different countries of origin (Brazil, Timor, Honduras, Angola, Vietnam, Costa Rica, Colombia, Guatemala, Nicaragua, India, and Uganda) were evaluated. The fungal load in the contaminated samples ranged from 0 to 12330 colony forming units (CFU)/g, of which approximately 67% presented contamination levels below 1500 CFU/g, while 11% exhibited intermediate contamination levels between 1500 and 3000 CFU/g. Contamination levels higher than 3000 CFU/g were found in 22% of contaminated coffee samples. Fifteen different fungi were isolated by culture-based methods and Aspergillus species belonging to different sections (complexes). The predominant Aspergillus section detected was Nigri (39%), followed by Aspergillus section Circumdati (29%). Molecular analysis detected the presence of Aspergillus sections Fumigati and Circumdati. The% coffee samples where Aspergillus species were identified by culture-based methods were 96%. Data demonstrated that green coffee beans samples were contaminated with toxigenic fungal species. Since mycotoxins may be resistant to the roasting process, this suggests possible exposure to mycotoxins through consumption of coffee. Further studies need to be conducted to provide information on critical points of coffee processing, such that fungal contamination may be reduced or eliminated and thus exposure to fungi and mycotoxins through coffee handling and consumption be prevented.

BCG-loaded chitosan microparticles: interaction with macrophages and preliminary in vivo studies.

The aim of this study was to develop a novel BCG-loaded chitosan vaccine with high association efficiency which can afford efficient interaction with APC and elicit local and Th1-type-specific immune response after intranasal administration. Chitosan-suspended BCG and BCG-loaded chitosan-alginate microparticles were prepared by ionotropic gelation. Interaction with APC was evaluated by fluorescence microscopy using rBCG-GFP. Specific immune responses were evaluated following intranasal immunisation of mice. Cellular uptake was approximately two-fold higher for chitosan-suspended BCG. A single dose of BCG-loaded microparticles or chitosan-suspended BCG by intranasal route improved Th1-type response compared with subcutaneous BCG. Chitosan-suspended BCG originated the highest mucosal response in the lungs by intranasal route. These positive results indicate that the proposed approach of whole live BCG microencapsulation in chitosan-alginate for intranasal immunisation was successful in allowing efficient interaction with APC, while improving the cellular immune response, which is of interest for local immunisation against tuberculosis.

Aspergillus spp. prevalence in different Portuguese occupational environments: What is the real scenario in high load settings?

The genus Aspergillus is one of the most prevalent regarding fungi in several highly contaminated occupational environments. The goal of the current study was to assess the prevalence of Aspergillus spp. in different settings, focusing on those where a higher load of fungal contamination is expected according to the European Agency for Safety and Health at Work. A specific protocol to ensure a more accurate assessment of the exposure to Aspergillus spp. is proposed aimed at allowing a detailed risk characterization and management. Two wastewater treatment plants, one wastewater elevation plant, four waste treatment plants, three cork industries, five slaughter houses, four feed industries, one poultry pavilion, and two swineries, all located in the outskirts of Lisbon, were assessed. In total, 125 air samples and 125 surface samples were collected and analysed by culture-based methods. Real-time polymerase chain reaction was performed to detect fungal presence in 100 samples, targeting the Aspergillus sections Circumdati, Flavi, and Fumigati. The highest prevalence of Aspergillus spp. was found in wastewater treatment plants (69.3%; 31.1%), waste treatment plants (34.8%; 73.6%), and poultry feed industry (6.3%; 26.1%), in air and surfaces, respectively. Aspergillus spp. was also prevalent in cork industry (0.9%; 23.4%), slaughter houses (1.6%; 17.7%), and swineries (7.4%; 9.5%), in air and surfaces, respectively. The Aspergillus sections more prevalent in the air and surfaces of all the assessed settings were the Nigri section (47.46%; 44.71%, respectively), followed by Fumigati (22.28%; 27.97%, respectively) and Flavi (10.78%; 11.45%, respectively) sections. Aspergillus section Fumigati was successfully amplified by qPCR in 18 sampling sites where the presence of this fungal species had not been identified by conventional methods. It should be highlighted that the occupational exposure burden is due not only to the Aspergillus load, but also to the toxigenic potential of this genus. Based on our results, a protocol relied in the application of conventional and molecular methods in parallel is herein suggested aimed at allowing a better risk characterization and management.

Effect of Experimental Parameters on Alginate/Chitosan Microparticles for BCG Encapsulation.

The aim of the present study was to develop novel Mycobacterium bovis bacille Calmette-Guérin (BCG)-loaded polymeric microparticles with optimized particle surface characteristics and biocompatibility, so that whole live attenuated bacteria could be further used for pre-exposure vaccination against Mycobacterium tuberculosis by the intranasal route. BCG was encapsulated in chitosan and alginate microparticles through three different polyionic complexation methods by high speed stirring. For comparison purposes, similar formulations were prepared with high shear homogenization and sonication. Additional optimization studies were conducted with polymers of different quality specifications in a wide range of pH values, and with three different cryoprotectors. Particle morphology, size distribution, encapsulation efficiency, surface charge, physicochemical properties and biocompatibility were assessed. Particles exhibited a micrometer size and a spherical morphology. Chitosan addition to BCG shifted the bacilli surface charge from negative zeta potential values to strongly positive ones. Chitosan of low molecular weight produced particle suspensions of lower size distribution and higher stability, allowing efficient BCG encapsulation and biocompatibility. Particle formulation consistency was improved when the availability of functional groups from alginate and chitosan was close to stoichiometric proportion. Thus, the herein described microparticulate system constitutes a promising strategy to deliver BCG vaccine by the intranasal route.

Portuguese cork industry: filling the knowledge gap regarding occupational exposure to fungi and related health effects.

Introduction: The presence of the Penicillium section Aspergilloides (formerly known as Penicillium glabrum) in the cork industry involves the risk of respiratory diseases such as suberosis. Methods: The aim of this study was to corroborate the predominant fungi present in this occupational environment by performing a mycological analysis of 360 workers' nasal exudates collected by nasal swabs. Additionally, evaluation of respiratory disorders among the cork workers was also performed by spirometry. Results: Penicillium section Aspergilloides was detected by qPCR in 37 out of the 360 nasal swabs collected from workers' samples. From those, 25 remained negative for Penicillium sp. when using culture-based methods. A significant association was found between ventilatory defects and years of work in the cork industry, with those people working for 10 or more years in this industry having an approximately two-fold increased risk of having ventilatory defects compared to those working less time in this setting. Among the workers who detected the presence of Penicillium section Aspergilloides, those with symptoms presented slightly higher average values of CFU. Discussion: Overall, the results obtained in this study show that working in the cork industry may have adverse effects on worker's respiratory health. Nevertheless, more studies are needed (e.g., using serological assays) to clarify the impact of each risk factor (fungi and dust) on disease etiology.

Assessment of Portuguese fitness centers: Bridging the knowledge gap on harmful microbial contamination with focus on fungi.

The lack of knowledge regarding the extent of microbial contamination in Portuguese fitness centers (FC) puts attendees and athletes at risk for bioaerosol exposure. This study intends to characterize microbial contamination in Portuguese FC by passive sampling methods: electrostatic dust collectors (EDC) (N = 39), settled dust (N = 8), vacuum filters (N = 8), and used cleaning mops (N = 12). The obtained extracts were plated in selective culture media for fungi and bacteria. Filters, EDC, and mop samples' extracts were also screened for antifungal resistance and used for the molecular detection of the selected Aspergillus sections. The detection of mycotoxins was conducted using a high-performance liquid chromatograph (HPLC) system and to determine the cytotoxicity of microbial contaminants recovered by passive sampling, HepG2 (human liver carcinoma) and A549 (human alveolar epithelial) cells were employed. The results reinforce the use of passive sampling methods to identify the most critical areas and identify environmental factors that influence microbial contamination, namely having a swimming pool. The cardio fitness area presented the highest median value of total bacteria (TSA: 9.69 × 102 CFU m-2.day-1) and Gram-negative bacteria (VRBA: 1.23 CFU m-2.day-1), while for fungi it was the open space area, with 1.86 × 101 CFU m-2.day-1. Aspergillus sp. was present in EDC and in filters used to collect settled dust. Reduced azole susceptibility was observed in filters and EDC (on ICZ and VCZ), and in mops (on ICZ). Fumonisin B2 was the only mycotoxin detected and it was present in all sampling matrixes except settled dust. High and moderate cytotoxicity was obtained, suggesting that A549 cells were more sensitive to samples' contaminants. The observed widespread of critical toxigenic fungal species with clinical relevance, such as Aspergillus section Fumigati, as well as Fumonisin B2 emphasizes the importance of frequent and effective cleaning procedures while using shared mops appeared as a vehicle of cross-contamination.