Hovenia dulcis Thumberg: Phytochemistry, Pharmacology, Toxicology and Regulatory Framework for Its Use in the European Union.

Hovenia dulcis Thunberg is an herbal plant, belonging to the Rhamnaceae family, widespread in west Asia, USA, Australia and New Zealand, but still almost unknown in Western countries. H. dulcis has been described to possess several pharmacological properties, such as antidiabetic, anticancer, antioxidant, anti-inflammatory and hepatoprotective, especially in the hangover treatment, validating its use as an herbal remedy in the Chinese Traditional Medicine. These biological properties are related to a variety of secondary metabolites synthesized by the different plant parts. Root, bark and leaves are rich of dammarane-type triterpene saponins; dihydrokaempferol, quercetin, 3,3',5',5,7-pentahydroflavone and dihydromyricetin are flavonoids isolated from the seeds; fruits contain mainly dihydroflavonols, such as dihydromyricetin (or ampelopsin) and hovenodulinol, and flavonols such as myricetin and gallocatechin; alkaloids were found in root, barks (frangulanin) and seeds (perlolyrin), and organic acids (vanillic and ferulic) in hot water extract from seeds. Finally, peduncles have plenty of polysaccharides which justify the use as a food supplement. The aim of this work is to review the whole scientific production, with special focus on the last decade, in order to update phytochemistry, biological activities, nutritional properties, toxicological aspect and regulatory classification of H. dulcis extracts for its use in the European Union.

An Enzymatic Flow-Based Preparative Route to Vidarabine.

The bi-enzymatic synthesis of the antiviral drug vidarabine (arabinosyladenine, ara-A), catalyzed by uridine phosphorylase from Clostridium perfringens (CpUP) and a purine nucleoside phosphorylase from Aeromonas hydrophila (AhPNP), was re-designed under continuous-flow conditions. Glyoxyl-agarose and EziGTM1 (Opal) were used as immobilization carriers for carrying out this preparative biotransformation. Upon setting-up reaction parameters (substrate concentration and molar ratio, temperature, pressure, residence time), 1 g of vidarabine was obtained in 55% isolated yield and >99% purity by simply running the flow reactor for 1 week and then collecting (by filtration) the nucleoside precipitated out of the exiting flow. Taking into account the substrate specificity of CpUP and AhPNP, the results obtained pave the way to the use of the CpUP/AhPNP-based bioreactor for the preparation of other purine nucleosides.

Affinity-based separation methods for the study of biological interactions: The case of peroxisome proliferator-activated receptors in drug discovery.

Affinity-based methods using immobilized proteins are important approaches for understanding the interactions between small molecules and biological targets. This review is intended to provide an overview of different affinity based separation methods that have been applied to the study of peroxisome proliferator activated receptors (PPARs). The screening of compound to increase screening rates for synthetic and natural ligands of PPAR are reported. Pros and cons of the approaches in ligand discovery initiatives are discussed.

Epitope and affinity determination of recombinant Mycobacterium tuberculosis Ag85B antigen towards anti-Ag85 antibodies using proteolytic affinity-mass spectrometry and biosensor analysis.

Tuberculosis (TB) is the first cause of death from infectious diseases worldwide. Only a single anti-TB vaccine is currently available for clinical use, but its efficacy is not achieved with certainty. The aim of this work is to provide a basis for the rational design of a neo-glycoconjugate vaccine against TB. Structural characterization of recombinant antigenic proteins from Mycobacterium tuberculosis (MTB) Ag85B (rAg85B, variants, and semi-synthetic glycoconjugates) was initially carried out. Identification of antibody epitope analyses by proteolytic affinity-mass spectrometry and surface plasmon resonance (SPR) biosensor analyses were performed in order to qualitatively identify and quantitatively characterize interaction structures of the antigens with antibodies from different sources. A commercial monoclonal antibody and polyclonal antibodies from different sources (patients with active TB, vaccinated individuals, and a healthy control) were employed to analyze antigen-antibody interactions. These combined approaches provided the identification of different assembled epitope regions on the recombinant MTB antigens, their affinity binding constants in the interactions with specific antibodies, and revealed the importance of protection from excessive glycosylation. The identified epitope peptides should constitute a suitable basis for the design of new specific target vaccines. Graphical abstract ᅟ.

Combination of a solid phase extraction and a two-dimensional LC-UV method for the analysis of vitamin D3 and its isomers in olive oil.

The current HPLC methods for the quantification of vitamin D3 (VitD3) and its two isomers previtamin D3 (PreVitD3) and trans-vitamin D3 (trans-VitD3) in olive oil preparations present some limitations mainly due to peak overlapping of the oily matrix components with the compounds of interest. The use of two-dimensional liquid chromatography (2D-LC) with different retention mechanism can reach higher resolving power thus allowing the analysis of complex samples. The present paper proposes a new alternative method including a solid phase extraction sample preparation step and a two-dimensional liquid chromatographic analysis using routine instrumentation, fitting the needs of quality assurance and quality control laboratories of pharmaceutical companies. The extraction protocol was demonstrated to provide a clean-up of the sample and a quantitative recovery of the species of interest. The 2D method proved its suitability in the isolation of vitamins from oil components in the first dimension and the separation and quantification of the analytes in the second dimension thanks to the orthogonal selectivities of phenyl and porous graphitic carbon (PGC) stationary phases. The method was validated following ICH guidelines and possesses an adequate sensitivity to quantify the impurity trans-VitD3 in pharmaceuticals considering the limits imposed by regulatory agencies. The applicability of the phenyl x PGC 2D-LC-UV method to quality control of medicinal products based on VitD3 in olive oil was confirmed by the successful quantification of vitamins in olive oil formulations.

Assessment of immobilized PGA orientation via the LC-MS analysis of tryptic digests of the wild type and its 3K-PGA mutant assists in the rational design of a high-performance biocatalyst.

The mutant penicillin G acylase (PGA) 3K-PGA contains three additional Lys residues on the surface opposite the active site. This protein was designed to selectively drive its immobilization on aldehyde supports. We describe here a modified bottom-up proteomic method to assess the orientation of the immobilized wild-type and mutant proteins to verify our hypothesis of a driven immobilization induced by the mutations introduced. Tryptic digestion of the immobilized enzymes followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis of released peptides was performed. This protocol generated peptides from the most accessible surface areas of the immobilized protein, thus not directly bound to the solid support, providing direct evidence of the areas involved in the linkage to the solid matrix. The results obtained suggest that 72 % of the wild-type PGA is immobilized on aldehyde agarose mainly through the Lys residues on the same side of the active site, whereas 3K-PGA reacted with the same support preferentially through the additional Lys residues introduced by mutation on the opposite side. This demonstrates that the active site of the 3K-PGA faces mostly (63 %) toward the reaction medium, resulting in significantly improved accessibility to the substrates. This finding is supported by the catalytic properties of the immobilized biocatalysts. The two immobilized preparations were tested in the synthesis of mandelyl-7-aminocephalosporanic acid (mandelyl-7-ACA) by N-acylation of the ß-lactam nucleus (7-aminocephalosporanic acid) with mandelic acid methyl ester: upon immobilization, the synthetic properties of wild-type PGA strongly decreased, whereas those of 3K-PGA were unaffected. Furthermore, the activity of 3K-PGA was not influenced by the physicochemical nature of the support used for immobilization (glyoxyl agarose or aldehyde Sepabeads) unlike that of wild-type PGA, whose active site is close to the matrix. The results obtained from the analytical characterization correlate well with those obtained by investigation of the synthetic properties of the immobilized enzymes both in the synthesis of mandelyl-7-ACA and in the preparative synthesis of cefazolin. This work highlights the effect exerted by site-directed mutagenesis on the orientation of PGA upon immobilization on solid matrices and suggests how protein engineering tools can be exploited in a synergistic fashion to rationally develop efficient biocatalysts.

Development of new chromatographic tools based on A2A adenosine receptor subtype for ligand characterization and screening by FAC-MS.

A liquid chromatographic stationary phase containing immobilized membranes from cells expressing A(2A) adenosine receptor (A(2A)AR) is firstly described. Cellular membranes from CHO cells stably transfected with human A(2A)AR vector (A(2A)(+)) and from the same cell line transfected with the corresponding empty vector (A(2A)(-)) were entrapped on immobilized artificial membrane (IAM) support and packed into 6.6 mm I.D. glass columns to create A(2A)(+)-IAM and A(2A)(-)-IAM stationary phases. Frontal chromatography experiments on both A(2A)(+)-IAM and A(2A)(-)-IAM columns demonstrated the presence of a low specific interaction with the receptor. However, immobilized A(2A) retained its ability to specifically bind known ligands as demonstrated by the agreement of the calculated K(d) values with two different chromatographic protocols in comparison to previously reported data. In order to maximize the specific interaction, the same cellular membranes were immobilized on the inner surface of a silica capillary (40 cm × 100 µm I.D.) by non-covalent interactions using the avidin-biotin coupling system to create two open tubular columns A(2A)(+)-OT and A(2A)(-)-OT. The open tubular system was characterized by ranking experiments for affinity studies in mixture useful for the selection of new potential candidates.

Ganoderma resinaceum and Perenniporia fraxinea: Two Promising Wood Decay Fungi for Pharmaceutical Degradation.

Wood decay fungi (WDF) are a well-known source of enzymes and metabolites which have applications in numerous fields, including myco-remediation. Pharmaceuticals are becoming more problematic as environmental water pollutants due to their widespread use. In this study, Bjerkandera adusta, Ganoderma resinaceum, Perenniporia fraxinea, Perenniporia meridionalis and Trametes gibbosa were chosen from WDF strains maintained in MicUNIPV (the fungal research collection of the University of Pavia) to test their potential to degrade pharmaceuticals. The degradation potential was tested in spiked culture medium on diclofenac, paracetamol and ketoprofen, three of the most common pharmaceuticals, and irbesartan, a particularly difficult molecule to degrade. G. resinaceum and P. fraxinea were found to be the most effective at degradation, achieving 38% and 52% (24 h) and 72% and 49% (7 d) degradations of diclofenac, 25% and 73% (24 h) and 100% (7 d) degradations of paracetamol and 19% and 31% (24 h) and 64% and 67% (7 d) degradations of ketoprofen, respectively. Irbesartan was not affected by fungal activity. The two most active fungi, G. resinaceum and P. fraxinea, were tested in a second experiment in discharge wastewater collected from two different wastewater treatment plants in northern Italy. A high degradation was found in azithromycin, clarithromycin and sulfametoxazole (from 70% up to 100% in 7 days).

Glycovaccine Design: Optimization of Model and Antitubercular Carrier Glycosylation via Disuccinimidyl Homobifunctional Linker.

Conjugation via disuccinimidyl homobifunctional linkers is reported in the literature as a convenient approach for the synthesis of glycoconjugate vaccines. However, the high tendency for hydrolysis of disuccinimidyl linkers hampers their extensive purification, which unavoidably results in side-reactions and non-pure glycoconjugates. In this paper, conjugation of 3-aminopropyl saccharides via disuccinimidyl glutarate (DSG) was exploited for the synthesis of glycoconjugates. A model protein, ribonuclease A (RNase A), was first considered to set up the conjugation strategy with mono- to tri- mannose saccharides. Through a detailed characterization of synthetized glycoconjugates, purification protocols and conjugation conditions have been revised and optimized with a dual aim: ensure high sugar-loading and avoid the presence of side reaction products. An alternative purification approach based on hydrophilic interaction liquid chromatography (HILIC) allowed the formation of glutaric acid conjugates to be avoided, and a design of experiment (DoE) approach led to optimal glycan loading. Once its suitability was proven, the developed conjugation strategy was applied to the chemical glycosylation of two recombinant antigens, native Ag85B and its variant Ag85B-dm, that are candidate carriers for the development of a novel antitubercular vaccine. Pure glycoconjugates (≥99.5%) were obtained. Altogether, the results suggest that, with an adequate protocol, conjugation via disuccinimidyl linkers can be a valuable approach to produce high sugar-loaded and well-defined glycovaccines.

Synthesis, Characterization and Application of a MIP-polyHIPE for Selective Extraction of Angiotensin II Receptor Antagonists Residues in Natural Waters.

Polymers via high internal phase emulsion (polyHIPEs) were molecularly imprinted with Irbesartan, an antihypertensive drug belonging to the class of angiotensin II receptor antagonists (sartan drugs), chosen for the proof-of-concept extraction of hazardous emerging contaminants from water. Different analyte-functional monomer molar ratios (1:100, 1:30 and 1:15) were investigated, and the MIP polyHIPEs have been characterized, parallel to the not imprinted polymer (NIP), by batch sorption experiments. The material with the highest template-functional monomer ratio was the best for Irbesartan removal, showing a sorption capacity fivefold higher than the NIP. Regarding the adsorption kinetics, the analyte-sorbent equilibrium was reached after about 3 h, and the film diffusion model best fitted the kinetic profile. Selectivity was further demonstrated by testing Losartan, another sartan drug, observing a fourfold lower sorption capacity, but still higher than that of NIP. The polymers were also synthesized in cartridges for solid-phase extraction (SPE), which was helpful for evaluating the breakthrough curves and performing pre-concentrations. These have been done in tap and river water samples (100-250 mL, 15-500 µg L-1 Irbesartan), obtaining quantitative sorption/desorption on the MIP-polyHIPE (RSD < 14%, n = 3). The NIP provided a recovery of just around 30%, evidence of partial uptake of the target from water.

Carbon nanotubes-modified poly-high internal phase emulsions for pharmaceuticals pre-concentration and determination.

This paper deals with the preparation of new composites between polymerized/crosslinked high internal phase emulsions (polyHIPEs) and carbon nanotubes (CNTs), specifically designed for pharmaceutical analytical applications. While the composition of the polyHIPEs was maintained constant, the amount of CNTs was varied from 0.5% to 1% w/v. As proof-of-concept, the materials were tested for solid-phase extraction. Three drugs with different physical-chemical properties, namely 17ß-estradiol (E2), Naproxen (NPX), and Oxprenolol (OXP) were selected as probes to investigate the adsorption/elution conditions on/from the CNT/polyHIPE composites for future analytical applications. The sorption and desorption behavior of the three analytes was studied at different pH values. The experimental results are coherent with chemistry of the support and the physical-chemical characteristics of the considered analytes. The incorporation of CNTs into the polyHIPEs network strongly influences the sorption properties of these materials.

Multi-approach LC-MS methods for the characterization of species-specific attributes of monoclonal antibodies from plants.

In this work, an analytical platform based on the use of chromatography and mass spectrometry (MS), has been applied to the characterization of Rituximab (RTX) obtained from two plant expression systems (rice and tobacco) in comparison to the mammalian cell-derived reference monoclonal antibody (mAb). Different chromatographic approaches, hyphenated to high resolution MS (HRMS), were applied to RTX structural investigation both at middle- and peptide level. In particular, cation exchange chromatography (CEX), size exclusion chromatography (SEC), reversed phase (RPLC) and hydrophilic interaction liquid chromatographic (HILIC) methods were developed and applied on intact mAbs, IdeS-, and trypsin digests in order to address critical attributes such as primary structure, glycan composition, species-related heterogeneity, glycosylation degree, charge variants, aggregation tendency and enzymatic stability. All the collected data highlight the features and criticalities of each production approach. Production in rice results in a heterogeneous but stable product over time, suggesting the absence of proteases in seeds; while tobacco expression system leads to more homogeneous glycosylation, but protein stability seems to be a critical issue probably due to the presence of proteases. This analytical strategy represents a robust support to scientists in the selection and optimization of the best plant expression system to produce recombinant humanized mAbs.

Monolithic Papain-Immobilized Enzyme Reactors for Automated Structural Characterization of Monoclonal Antibodies.

The characterization of monoclonal antibodies (mAbs) requires laborious and time-consuming sample preparation steps before the liquid chromatography-mass spectrometry (LC-MS) analysis. Middle-up approaches entailing the use of specific proteases (papain, IdeS, etc.) emerged as practical and informative methods for mAb characterization. This work reports the development of immobilized enzyme reactors (IMERs) based on papain able to support mAb analytical characterization. Two monolithic IMERs were prepared by the covalent immobilization of papain on different supports, both functionalized via epoxy groups: a Chromolith® WP 300 Epoxy silica column from Merck KGaA and a polymerized high internal phase emulsion (polyHIPE) material synthesized by our research group. The two bioreactors were included in an in-flow system and characterized in terms of immobilization yield, kinetics, activity, and stability using Nα-benzoyl-L-arginine ethyl ester (BAEE) as a standard substrate. Moreover, the two bioreactors were tested toward a standard mAb, namely, rituximab (RTX). An on-line platform for mAb sample preparation and analysis with minimal operator manipulation was developed with both IMERs, allowing to reduce enzyme consumption and to improve repeatability compared to in-batch reactions. The site-specificity of papain was maintained after its immobilization on silica and polyHIPE monolithic supports, and the two IMERs were successfully applied to RTX digestion for its structural characterization by LC-MS. The main pros and cons of the two supports for the present application were described.

Discovery of a Novel Inhibitor of Human Purine Nucleoside Phosphorylase by a Simple Hydrophilic Interaction Liquid Chromatography Enzymatic Assay.

Human purine nucleoside phosphorylase (HsPNP) belongs to the purine salvage pathway of nucleic acids. Genetic deficiency of this enzyme triggers apoptosis of activated T-cells due to the accumulation of deoxyguanosine triphosphate (dGTP). Therefore, potential chemotherapeutic applications of human PNP inhibitors include the treatment of T-cell leukemia, autoimmune diseases and transplant tissue rejection. In this report, we present the discovery of novel HsPNP inhibitors by coupling experimental and computational tools. A simple, inexpensive, direct and non-radioactive enzymatic assay coupled to hydrophilic interaction liquid chromatography and UV detection (LC-UV using HILIC as elution mode) was developed for screening HsPNP inhibitors. Enzymatic activity was assessed by monitoring the phosphorolysis of inosine (Ino) to hypoxanthine (Hpx) by LC-UV. A small library of 6- and 8-substituted nucleosides was synthesized and screened. The inhibition potency of the most promising compound, 8-aminoinosine (4), was quantified through Ki and IC50 determinations. The effect of HsPNP inhibition was also evaluated in vitro through the study of cytotoxicity on human T-cell leukemia cells (CCRF-CEM). Docking studies were also carried out for the most potent compound, allowing further insights into the inhibitor interaction at the HsPNP active site. This study provides both new tools and a new lead for developing novel HsPNP inhibitors.

Silk Fibroin Nanoparticle Functionalization with Arg-Gly-Asp Cyclopentapeptide Promotes Active Targeting for Tumor Site-Specific Delivery.

Arg-Gly-Asp (RGD)-based cyclopentapeptides (cRGDs) have a high affinity towards integrin αvß3 and αvß5, which are overexpressed by many tumor cells. Here, curcumin-loaded silk fibroin nanoparticles (SFNs) have been functionalized on the surface with cRGD to provide active targeting towards tumor cells; a "click reaction" between the RGD-based cyclopentapeptide carrying an azide group and triple-bond-functionalized nanoparticles has been exploited. Both naked and functionalized SFNs were less than 200 nm in diameter and showed a round-shaped morphology but, after functionalization, SFNs increased in size and protein molecular weight. The functionalization of SFNs' surfaces with cRGD provided active internalization by cells overexpressing integrin receptors. At the lowest concentration tested (0.01 mg/mL), functionalized SFNs showed more effective uptake with respect to the naked by tumor cells that overexpress integrin receptors (but not for non-overexpressing ones). In contrast, at higher concentrations, the non-specific cell membrane protein-particle interactions are promoted and coupled to specific and target mediated uptake. Visual observations by fluorescence microscopy suggested that SFNs bind to integrin receptors on the cell surface and are then internalized by endocytosis. Overall, SFN functionalization provided in vitro active targeting for site-specific delivery of anticancer drugs, boosting activity and sparing healthy organs.

Development and Validation of a Bioanalytical UHPLC-MS/MS Method Applied to Murine Liver Tissue for the Determination of Indocyanine Green Loaded in H-Ferritin Nanoparticles.

Indocyanine green (ICG) is one of the most commonly used fluorophores in near-infrared fluorescence-guided techniques. However, the molecule is prone to form aggregates in saline solution with a limited photostability and a moderate fluorescence yield. ICG was thus formulated using protein-based nanoparticles of H-ferritin (HFn) in order to generate a new nanostructure, HFn-ICG. In this study, an ultrahigh performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) system was employed to develop and validate the quantitative analysis of ICG in liver tissue samples from HFn-ICG-treated mice. To precipitate HFn, cold acetone in acidic solution at pH 5.0 was used. The processed liver samples were injected into the UHPLC-MS/MS system for analysis using the positive electrospray ionization mode. Chromatographic separation was achieved on a Waters Acquity UPLC® HSS T3 Column (1.8 µm, 2.1 × 100 mm) with 0.1% formic acid and acetonitrile as the mobile phase with gradient elution. The selected reaction monitoring transitions of   m / z 753 → m / z 330 and m / z 827 → m / z 330 were applied for ICG and IR-820 (the internal standard, IS), respectively. The method was selective and linear over a concentration range of 50-1,500 ng/ml. The method was validated for sensitivity, accuracy, precision, extraction recovery, matrix effect, and stability in liver tissue homogenates. ICG extraction recoveries ranged between 85 and 108%. The intra- and inter-day precisions were less than 6.28%. The method was applied to a bio-distribution study to compare the amount of ICG levels from mice treated with HFn-ICG and free ICG. The analyses of the homogenate samples from the two types of treatment showed that the concentration levels of ICG is approximately six-fold higher than those of free ICG (1,411 ± 7.62 ng/ml vs. 235 ± 26.0 ng/ml) at 2 h post injection.

Inverse Poly-High Internal Phase Emulsions Poly(HIPEs) Materials from Natural and Biocompatible Polysaccharides.

This paper shows one of the few examples in the literature on the feasibility of novel materials from natural and biocompatible polymers like inulin (INU) or glycol chitosan (GCS) templated by the formation of o/w (inverse) high internal phase emulsion (HIPE). To the best of our knowledge, this is the first example of inverse polyHIPEs obtained from glycol chitosan or inulin. The obtained polyHIPEs were specifically designed for possible wound dressing applications. The HIPE (pre-crosslinking emulsion) was obtained as inverse HIPE, i.e., by forming a cream-like 80:20 v/v o/w emulsion by using the isopropyl myristate in its oil phase, which is obtained from natural sources like palm oil or coconut oil. The surfactant amount was critical in obtaining the inverse HIPE and the pluronic F127 was effective in stabilizing the emulsion comprising up to 80% v/v as internal phase. The obtained inverse HIPEs were crosslinked by UV irradiation for methacrylated INU or by glutaraldehyde-crosslinking for GCS. In both cases, inverse poly-HIPEs were obtained, which were physicochemically characterized. This paper introduces a new concept in using hydrophilic, natural polymers for the formation of inverse poly-HIPEs.

Nature-derived compounds modulating Wnt/ ß -catenin pathway: a preventive and therapeutic opportunity in neoplastic diseases.

The Wnt/ß-catenin signaling is a conserved pathway that has a crucial role in embryonic and adult life. Dysregulation of the Wnt/ß-catenin pathway has been associated with diseases including cancer, and components of the signaling have been proposed as innovative therapeutic targets, mainly for cancer therapy. The attention of the worldwide researchers paid to this issue is increasing, also in view of the therapeutic potential of these agents in diseases, such as Parkinson's disease (PD), for which no cure is existing today. Much evidence indicates that abnormal Wnt/ß-catenin signaling is involved in tumor immunology and the targeting of Wnt/ß-catenin pathway has been also proposed as an attractive strategy to potentiate cancer immunotherapy. During the last decade, several products, including naturally occurring dietary agents as well as a wide variety of products from plant sources, including curcumin, quercetin, berberin, and ginsenosides, have been identified as potent modulators of the Wnt/ß-catenin signaling and have gained interest as promising candidates for the development of chemopreventive or therapeutic drugs for cancer. In this review we make an overview of the nature-derived compounds reported to have antitumor activity by modulating the Wnt/ß-catenin signaling, also focusing on extraction methods, chemical features, and bio-activity assays used for the screening of these compounds.

Chromatographic tools for plant-derived recombinant antibodies purification and characterization.

In the last two decades, plants became an interesting alternative for the production of recombinant proteins for human therapy and several antibodies expressed in plants have reached the clinical development stage. Plants are capable of post-translational modifications (PTMs) necessary for protein activity and pharmacokinetics, such as glycosylation. However, there are important kingdom-specific modifications that have to be considered when expressing recombinant proteins. Therefore, there is a need for efficient analytical methods for deep protein characterization starting from the expression platform design until the product approval to guarantee product authenticity, quality and efficacy. Literature lacks of reviews dealing with plant-derived proteins purification and characterization by chromatographic methods, thus the focus of the present review is on this topic for the most representative biotechnological drugs i.e. monoclonal antibodies (mAbs). In the first part, a comprehensive discussion of the methods applied in dowstream processes (extraction and clarification) and a detailed overview of the chromatographic techniques useful for the purification of plant-made mAbs are reported. Among purification techniques, Protein A affinity chromatography, ion-exchange chromatography, hydrophobic interaction chromatography, hydrophobic charge induction chromatography or mixed mode chromatography are described. In the second part, we will discuss analytical platforms based on chromatographic techniques (reverse phase, size exclusion chromatography, ion-exchange chromatography, hydrophilic interaction liquid chromatography) coupled with different detection systems (UV, Fluorescence, MS) used at protein, peptide and glycan level to characterize plant-made mAbs with their unique features.

Development and validation of a simple and versatile method for the quantification of everolimus loaded in H-ferritin nanocages using UHPLC-MS/MS.

Everolimus (Eve) is an immunosuppressive macrolide that is being analyzed in various biological matrices and fluids. Its antitumor activity makes this drug suitable not only for organ transplantation but also for breast cancer treatments. In the attempt to reduce the incidence and severity of its side effects, Eve was loaded in H-ferritin (HFn), a natural biomolecule that is involved in specific cellular uptake pathways. Thus, Eve pre-complexed with Cu(II) and encapsulated in HFn resulted in an Eve nanoformulation, named HEve. The quantification of HEve was performed using a tailored pH-induced procedure to precipitate H-ferritin. This sample preparation was effective enough to reduce the ion suppression effect on the mass spectrometric responses of Eve in electrospray ionization (ESI). The ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-ESI-MS/MS) system operating in positive ionization mode showed to be a versatile technique in achieving more than 77 % recovery of Eve from the cytoplasmic compartment. This simple, selective and sensitive method enabled the quantification of Eve within the linear range of 2.5-100 ng/mL in matrix spiked with the isotope-labeled internal standard, EveD4. This method was validated according to FDA Guidance. The intracellular distribution of HEve and its accumulation at a cytoplasmic level were studied in breast cancer cell lines. As expected, HEve was more effective than free Eve on sensitive (i.e. BT474) and resistant cell lines, as a result of a better penetration into the target subcellular compartment.