RESUMO
Nowadays, wastewater treatment plants (WWTPs) are transforming into water resource recovery facilities (WRRFs) where the resource recovery from waste streams is pivotal. Aerobic granular sludge (AGS) is a novel technology applied for wastewater treatment. Extracellular polymeric substances (EPS) secreted by microorganisms promote the aggregation of bacterial cells into AGS and the structural fraction of EPS (sEPS) is responsible for the mechanical properties of AGS. sEPS can be extracted and recovered from waste AGS by physico-chemical methods and its characterization is to date of relevant concern to understand the properties in the perspective of potential applications. This study reports on: characterization of sEPS extracted and recovered from AGS; - formation and characterization of sEPS-based hydrogels. Briefly, sEPS were extracted by a thermo-alkaline process followed by an acidic precipitation. sEPS-based hydrogels were formed by a cross-linking process with a 2.5% w/w CaCl2 solution. The following key-findings can be drawn: i) hydrogels can be formed starting from 1% w/w sEPS on, by diffusion of Ca2+ into sEPS network; ii) the Ca/C molar ratio of hydrogels decreased with increasing concentration of sEPS from 1 to 10% w/w; iii) the thermogravimetric and spectroscopic behaviours of sEPS show that the cross-linking reaction mainly involves the polysaccharidic fraction of biopolymers; iv) water-holding capacity up to 99 gH2O/gsEPS was registered for 1% w/w sEPS-based hydrogels, suggesting applications in several industrial sectors (i.e. chemical, paper, textile, agronomic, etc.); v) rheological results highlighted a solid-like behaviour (G'â«G") of sEPS-based hydrogels. The power-law fitting of G' vs. sEPS concentration suggests that the expansion of the sEPS network during cross-linking occurs through a percolative mechanism involving the initial formation of sEPS oligomers clusters followed by their interconnection towards the formation of 3D network. These findings provide additional information about the mechanisms of sEPS-based hydrogel formation and reveal the peculiar physico-chemical characteristics of sEPS which nowadays are increasingly gaining interest in the context of resource recovery.
Assuntos
Matriz Extracelular de Substâncias Poliméricas , Esgotos , Eliminação de Resíduos Líquidos/métodos , Hidrogéis , Biopolímeros/química , Reatores Biológicos , Águas Residuárias , AerobioseRESUMO
The presence of an ever increasing amount of plastic in the Italian river system makes it necessary to understand the contribution of their different sources. We focus on the contribution from the wastewater treatment plants to the microplastics (MPs), size less than 5 mm, conveyed to the fluvial system, and on the development of methods for their detection in this matrix. This study, one of the first in Italy, is aimed to investigate the content of MPs present in the effluent of the main wastewater treatment plant in Florence (Italy). We sampled wastewater during dry season to mainly quantify the contribution from civil and municipal activities to the MPs release. The samples were continuously collected over a period of 24 h at the exit of the water line using a series of 8 sieves with different mesh sizes (almost 1000 L filtered volume). The sampled material was analyzed by optical microscopy and micro-Raman spectroscopy by use of low-cost, portable instruments. The spatial resolution of the spectrometer matches the minimum dimension of the mesh size in use (38 µm). The analysis detected an average concentration of 5 MPs per liter in the 38-1000 µm diameter range, corresponding to a daily release of about 35 kg/day into the River Arno, a result in line with other studies carried out on Europe's major rivers. We provide a classification of the polymer composition showing the predominant presence of Polypropylene (29%), Polyethylene (18%) and Polyester (14%). The MP shape classification reveals the relevance of fibers in effluents. The number of sieves used provided an accurate size distribution curve of the sampled MPs allowing to estimate, by extrapolation, a relevant quantity of MPs finer than 38 µm whose determination would otherwise require much more sophisticated methods.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Monitoramento Ambiental , Microplásticos , Plásticos , Análise Espectral Raman , Águas Residuárias , Poluentes Químicos da Água/análiseRESUMO
This mini-review reports the effect of aerobic granular sludge (AGS) on performance and membrane-fouling in combined aerobic granular sludge-membrane bioreactor (AGS-MBR) systems. Membrane-fouling represents a major drawback hampering the wider application of membrane bioreactor (MBR) technology. Fouling can be mitigated by applying aerobic granular sludge technology, a novel kind of biofilm technology characterized by high settleability, strong microbial structure, high resilience to toxic/recalcitrant compounds of industrial wastewater, and the possibility to simultaneously remove organic matter and nutrients. Different schemes can be foreseen for the AGS-MBR process. However, an updated literature review reveals that in the AGS-MBR process, granule breakage represents a critical problem in all configurations, which often causes an increase of pore-blocking. Therefore, to date, the objective of research in this sector has been to develop a stable AGS-MBR through multiple operational strategies, including the cultivation of AGS directly in an AGS-MBR reactor, the occurrence of an anaerobic-feast/aerobic-famine regime in continuous-flow reactors, maintenance of average granule dimensions far from critical values, and proper management of AGS scouring, which has been recently recognized as a crucial factor in membrane-fouling mitigation.
RESUMO
Over the last few years, wastewater treatment plants (WWTPs) have been rebranded as water resource recovery facilities (WRRFs), which recognize the resource recovery potential that exists in wastewater streams. WRRFs contribute to a circular economy by not only producing clean water but by recovering valuable resources such as nutrients, energy, and other bio-based materials. To this aim, huge efforts in technological progress have been made to valorize sewage and sewage sludge, transforming them into valuable resources. This review summarizes some of the widely used and effective strategies applied at pilot- and full-scale settings in order to valorize the wastewater treatment process. An overview of the different technologies applied in the water and sludge line is presented, covering a broad range of resources, i.e., water, biomass, energy, nutrients, volatile fatty acids (VFA), polyhydroxyalkanoates (PHA), and exopolymeric substances (EPS). Moreover, guidelines and regulations around the world related to water reuse and resource valorization are reviewed.
Assuntos
Poli-Hidroxialcanoatos , Purificação da Água , Ácidos Graxos Voláteis , Esgotos , Eliminação de Resíduos Líquidos , Águas ResiduáriasRESUMO
This work reports on simultaneous nitrification, denitrification and phosphorus removal treating real domestic wastewater with low carbon/nitrogen (C/N) ratio by aerobic granular sludge (AGS). Operations at high sludge retention time (SRT = 61 ± 24 days) resulted in low biomass yield per chemical oxygen demand removed (CODrem) (0.21 ± 0.01 gCODx/gCODrem), lower COD demand for denitrification as well as high effluent quality in terms of total suspended solids (TSS) (22 ± 7 mgTSS/L). The average ratio between the biodegradable soluble COD stored anaerobically as polyhydroxyalkanoates (PHAs) and the N removed was 3.1 ± 0.6 gCODsto/gNrem, suggesting that nitrification/denitrification occurred partly via the nitrite pathway. Results revealed that stable AGS process with high C/N/P removal efficiency of 84/71/96% can be obtained besides a low organic loading rate (0.43 ± 0.11 g COD/L/d) and influent C/N ratio (3.8 ± 1.6 g/g), resulting in a high effluent quality characterized by 25 ± 6 mg sCOD/L, 0.09 ± 0.07 mgPO4-P/L, 9 ± 2 mgTIN/L (10 ± 2 mgTN/L) and 22 ± 7 mgTSS/L.