Assessment of water quality classes using self-organizing map and fuzzy C-means clustering methods in Ergene River, Turkey.

Surface water is one of the primary sources for drinking, irrigation, and industrial activities in Ergene River, Turkey. However, its quality has deteriorated due to the point and non-point pollution sources. Therefore, an appropriate assessment of surface water quality is very important. Water quality classification is calculated separately for each quality parameter in Turkey. An overall assessment of surface water quality is essential for water management. In this study, self-organizing maps (SOMs) and fuzzy C-means clustering (FCM) methods have been used for assessing surface water quality in the Ergene River. Seven water quality parameters have been considered as important indicators to evaluate water quality status in 7 observation points located in the river, covering the period from 1985 to 2013.

Evaluation of Cytotoxicity and Mutagenicity of Wastewater from Istanbul: Data from Hospitals and Advanced Wastewater Treatment Plant.

Wastewater (WW) carry considerable amount of chemicals that could have mutagenic or cytotoxic effect from hospital discharges to aquatic environment. Our objective was to determinate the possible mutagenic and toxic effects of hospital originated WWs and effectiveness of the wastewater treatment plants (WTP) functions. In the study the mutagenic and cytotoxic potential of three hospitals and influent/effluent of a treatment plant WW collected in Istanbul and was examined using AMES, XTT, and lactate dehydrogenase (LDH) assays. Mutagenic effects were detected at both hospital discharges and advanced biological wastewater plant. We observed no cytotoxic effect in fibroblasts for LDH and XTT assays whereas high cytotoxicity for all samples was found in hepatocytes by XTT assay. According to the results even if advanced technology is used for treatment of WW, mutagenic and cytotoxic effects still remain, and the present technologies need to be further improved.

Evaluation of different wastewater treatment techniques in three WWTPs in Istanbul for the removal of selected EDCs in liquid phase.

Endocrine-disrupting compounds (EDCs) are exogenous substances that cause adverse health effects in an intact organism, or its progeny, subsequent to the changes in endocrine function. Recent studies have shown that wastewater treatment plant effluents play an important role in the release of EDCs into aquatic environments. Therefore, in this study, influent and effluent samples from three different wastewater treatment plants (WWTPs) in Istanbul were analysed for the presence of the principal EDCs. These chemicals include steroids and synthetic organic chemicals. Thus, the occurrence and fate of EDCs of great health concern were monitored at three WWTPs in Istanbul. Furthermore, these WWTPs are employing different treatment processes. Therefore, the EDC removal performances of different treatment regimes were also evaluated. Phytosterol was the most abundant EDC in the influent samples. Second group of compounds at high influent levels were alkyl phenols. Pesticide levels of all three WWTP influent samples were low. Pasakoy Advanced WWTP is more effective at eliminating EDCs. Kadikoy Primary WWTP exhibits the lowest EDC elimination efficiencies. To the best of our knowledge, this work comprises the first detailed report on the occurrence and behaviour of both natural and synthetic EDCs in WWTPs of Istanbul and Turkey. The steroid estrogen levels of this study are higher than the previously documented values, except the levels given for Gaobeidian WWTP in Beijing, China. This is attributed to higher population densities of Beijing and Istanbul and as well as to lower individual water consumption rates in the two cities.

Olive industry liquid waste from trash to metal adsorbent for wastewater purification.

The development of biobased polymeric materials for wastewater purification has become a demand due to the growing need for water free of hazardous metal ions for safe purposes. The organic components of the OLLW including carbohydrates, phenolics, aromatic acids and others are cost-effective and sustainable choices for this application. This work focuses on a method for turning the organic components of liquid waste from the olive industry (OILW) into a foam-based value-added polymer that has several metal ion binding sites. The process of making the target polymers involved reacting the components of the OILW with hexamethylene diisocyante and 1,4-phnyelene diisocynate to create the polymeric materials LHMIDIC and LPDIC that are in foam forms with urethane linkages, respectively. The adsorption competence of the polymeric foams toward Pb(II) was evaluated as a function of various parameters including adsorbent dose, pH, temperature, initial ion concentration and time. The optimum parameters values that led to a quantitative removal of Pb(II) were identified. The obtained thermodynamic parameters showed that the adsorption by the two foams was spontaneous at room temperature. The isothermal and kinetic values showed that the adsorption by synthesized foams follows a second order kinetic and obeys the Langmuir isothermal model. The foams showed a high tendency for removing multi metal ions present in a real sample of wastewater. The original nature of the starting material used in making the foam, cost and the obtained results showed the potential of using the foam in a large-scale plants of wastewater purification.

Olive Industry Solid Waste-Based Biosorbent: Synthesis and Application in Wastewater Purification.

In this work, we present a process for converting olive industry solid waste (OISW) into a value-added material with ionic receptors for use in the removal of toxic metal ions from wastewater. This 3D polymer is a promising adsorbent for large-scale application, since it is a low-cost material made from agricultural waste and showed exceptional performance. The synthesis of the network polymer involved the carboxymethylation of OISW and curing of the carboxymethylated OISW at an elevated temperature to promote the formation of ester linkages between OISW's components. FT-IR, atomic force microscopy, and thermal analysis were performed on the crosslinked product. The adsorption efficiency of the crosslinked carboxymethylated OISW toward Pb(II), Cu(II), and other toxic metal ions present in sewage was evaluated as a function of adsorbent dose, temperature, pH, time, and initial metal ion. The percentage removal of about 20 metal ions present in a sewage sample collected from a sewer plant located in the Palestinian Territories was determined. The adsorption efficiency did not drop even after six cycles of use. The kinetic study showed that the adsorption process follows the Langmuir isotherm model and the second-order adsorption rate. The experimental Qe values of 13.91 and 13.71 mg/g were obtained for Pb(II) and Cu(II) removal, respectively. The thermodynamic results confirm the spontaneous metal bonding to the receptor sites of the crosslinked carboxymethylated OISW.

Cellulose based polyurethane with amino acid functionality: Design, synthesis, computational study and application in wastewater purification.

Contamination in water is due to various environmental pollutants from natural and anthropogen activities. To remove toxic metals from contaminated water, we developed a novel adsorbent in foam form based on an olive industry waste material. The foam synthesis involved oxidation of cellulose extracted from the waste to dialdehyde, functionalization of the cellulose dialdehyde with an amino acid group, reacting the functionalized cellulose with hexamethylene diisocyanate and p-phenylene diisocyanate to produce the target polyurethanes Cell-F-HMDIC and Cell-F-PDIC, respectively. The optimum condition for lead(II) adsorption by Cell-F-HMDIC and Cell-F-PDIC were determined. The foams show the ability to quantitatively remove most of metal ions present in a real sample of sewage. The kinetic and thermodynamic studies confirmed a spontaneous metal ion binding to the foams with a second pseudo-order adsorption rate. The adsorption study revealed it obeys the Langmuir isotherm model. The experimental Qe values of both foams Cell-F-PDIC and Cell-F-HMDIC were 2.1929 and 2.0345 mg/g, respectively. Monte Carlo (MC) and Dynamic (MD) and simulations showed excellent affinity of both foams for lead ions with high adsorption negative energy value indicating vigorous interactions of Pb(II) with the adsorbent surface. The results indicate the usefulness of the developed foam in commercial applications. ENVIRONMENTAL IMPLICATION: Elimination of metal ions from contaminated environments is important for a number of reasons. They are toxic to humans via interaction with biomolecules, resulting in disruption of the metabolism and biological activities of many proteins. They are toxic to plants. Industrial effluents and/or wastewater discharged from production processes, contain a considerable amount of metal ions. In this work, the use of naturally produced materials, such as olive waste biomass, as adsorbents for environmental remediation has received great attention. This biomass represents unused resources and presents serious disposal problems. We demonstrated that such materials are capable of selectively adsorbing metal ions.

Adsorptive removal of bisphenol A from aqueous solutions using phosphonated levan.

In this study, the potential use of phosphonated Halomonas Levan (PhHL) as a natural and cost effective adsorbent for Bisphenol A (BPA), was systematically investigated via the study of the adsorption equilibrium, kinetics, and reuse potential as well as the interpretation of adsorption mechanism. The effects of pH and temperature on the adsorption were also evaluated. The maximum amount of BPA adsorbed on the unit weight of PhHL was determined as 104.8 (∓5.02) mg/g (at 298 K) and the maximum adsorption capacity was calculated as 126.6 mg/g by Sips model. FTIR and XPS studies were conducted to elucidate the adsorption mechanism. Based on the obtained results OH-pi and CH-pi interactions were found to be effective in the adsorption mechanism. The reuse ability was studied with three cycles of adsorption-desorption, and the results showed that the BPA adsorbed per gram of the PhHL decreased 28.6% after the third cycle. This study has shown that PhHL can be used as an effective adsorbent for the removal of BPA from aqueous solutions. The obtained results may be useful in the development of PhHL based adsorption systems for the removal of EDCs with similar chemical properties to BPA.

Halomonas smyrnensis as a cell factory for co-production of PHB and levan.

Levan is a fructan type polysaccharide that has long been considered as an industrially important biopolymer however its limited availability is mainly due to the bottlenecks associated with its large-scale production. To overcome such bottlenecks in the commercialization of this very promising polysaccharide, co-production of levan with polyhydroxyalkanoates (PHAs) by halophilic Halomonas smyrnensis cultures has been proposed in this study for the first time. After in silico and in vitro assessment of PHA accumulation, fermentation profiles for levan and PHA concentrations were obtained in the presence of sucrose and glucose and the PHA granules observed by TEM were found to be poly(3-hydroxybutyrate) (PHB) after detailed structural characterization by GC-MS, DSC, FTIR and NMR. Six nutrient limitation strategies based on nitrogen (N) and phosphorus (P) were tested but highest levan and PHB yields were obtained under unlimited conditions. H. smyrnensis is proved to co-produce PHB and levan while using inexpensive carbon sources which is a commercially successful microbial cell factory system showing a great potential in lowering manufacturing costs and aiming for a zero waste policy within the biorefinery concept.