Formula G1: Cell cycle in the driver's seat of stem cell fate determination.

Cell cycle dynamics has emerged as a key regulator of stem cell fate decisions. In particular, differentiation decisions are associated with the G1 phase, and recent evidence suggests that self-renewal is actively regulated outside of G1. The mechanisms underlying these phenomena are largely unknown, but direct control of gene regulatory programs by the cell cycle machinery is heavily implicated. A recent study sheds important mechanistic insight by demonstrating that in human embryonic stem cells (hESCs) the Cyclin-dependent kinase CDK2 controls a wide-spread epigenetic program that drives transcription at differentiation-related gene promoters specifically in G1. Here, we discuss this finding and explore whether similar mechanisms are likely to function in multipotent stem cells. The implications of this discovery toward our understanding of stem cell-related disease are discussed, and we postulate novel mechanisms that position the cell cycle as a regulator of cell fate gene networks at epigenetic, transcriptional and post-transcriptional levels.

Integrative genomics positions MKRN1 as a novel ribonucleoprotein within the embryonic stem cell gene regulatory network.

In embryonic stem cells (ESCs), gene regulatory networks (GRNs) coordinate gene expression to maintain ESC identity; however, the complete repertoire of factors regulating the ESC state is not fully understood. Our previous temporal microarray analysis of ESC commitment identified the E3 ubiquitin ligase protein Makorin-1 (MKRN1) as a potential novel component of the ESC GRN. Here, using multilayered systems-level analyses, we compiled a MKRN1-centered interactome in undifferentiated ESCs at the proteomic and ribonomic level. Proteomic analyses in undifferentiated ESCs revealed that MKRN1 associates with RNA-binding proteins, and ensuing RIP-chip analysis determined that MKRN1 associates with mRNAs encoding functionally related proteins including proteins that function during cellular stress. Subsequent biological validation identified MKRN1 as a novel stress granule-resident protein, although MKRN1 is not required for stress granule formation, or survival of unstressed ESCs. Thus, our unbiased systems-level analyses support a role for the E3 ligase MKRN1 as a ribonucleoprotein within the ESC GRN.

Maintenance of gene silencing by the coordinate action of the H3K9 methyltransferase G9a/KMT1C and the H3K4 demethylase Jarid1a/KDM5A.

Chromatin remodeling is essential for controlling the expression of genes during development. The histone-modifying enzyme G9a/KMT1C can act both as a coactivator and a corepressor of transcription. Here, we show that the dual function of G9a as a coactivator vs. a corepressor entails its association within two distinct protein complexes, one containing the coactivator Mediator and one containing the corepressor Jarid1a/KDM5A. Functionally, G9a is important in stabilizing the Mediator complex for gene activation, whereas its repressive function entails a coordinate action with the histone H3 lysine 4 (H3K4) demethylase Jarid1a for the maintenance of gene repression. The essential nature of cross-talk between the histone methyltransferase G9a and the demethylase Jarid1a is demonstrated on the embryonic E(y)-globin gene, where the concurrent introduction of repressive histone marks (dimethylated H3K9 and dimethylated H3K27) and removal of activating histone mark (trimethylated H3K4) is required for maintenance of gene silencing. Taken together with our previous demonstration of cross-talk between UTX and MLL2 to mediate activation of the adult ß(maj)-globin gene, these data suggest a model where "active" and "repressive" cross-talk between histone-modifying enzymes coexist on the same multigene locus and play a crucial role in the precise control of developmentally regulated gene expression.

Hydrodynamic modulation of embryonic stem cell differentiation by rotary orbital suspension culture.

Embryonic stem cells (ESCs) can differentiate into all somatic cell types, but the development of effective strategies to direct ESC fate is dependent upon defining environmental parameters capable of influencing cell phenotype. ESCs are commonly differentiated via cell aggregates referred to as embryoid bodies (EBs), but current culture methods, such as hanging drop and static suspension, yield relatively few or heterogeneous populations of EBs. Alternatively, rotary orbital suspension culture enhances EB formation efficiency, cell yield, and homogeneity without adversely affecting differentiation. Thus, the objective of this study was to systematically examine the effects of hydrodynamic conditions created by rotary orbital shaking on EB formation, structure, and differentiation. Mouse ESCs introduced to suspension culture at a range of rotary orbital speeds (20-60 rpm) exhibited variable EB formation sizes and yields due to differences in the kinetics of cell aggregation. Computational fluid dynamic analyses indicated that rotary orbital shaking generated relatively uniform and mild shear stresses (< or =2.5 dyn/cm(2)) within the regions EBs occupied in culture dishes, at each of the orbital speeds examined. The hydrodynamic conditions modulated EB structure, indicated by differences in the cellular organization and morphology of the spheroids. Compared to static culture, exposure to hydrodynamic conditions significantly altered the gene expression profile of EBs. Moreover, varying rotary orbital speeds differentially modulated the kinetic profile of gene expression and relative percentages of differentiated cell types. Overall, this study demonstrates that manipulation of hydrodynamic environments modulates ESC differentiation, thus providing a novel, scalable approach to integrate into the development of directed stem cell differentiation strategies.

Transcriptomically Guided Mesendoderm Induction of Human Pluripotent Stem Cells Using a Systematically Defined Culture Scheme.

Human pluripotent stem cells (hPSCs) are an essential cell source in tissue engineering, studies of development, and disease modeling. Efficient, broadly amenable protocols for rapid lineage induction of hPSCs are of great interest in the stem cell biology field. We describe a simple, robust method for differentiation of hPSCs into mesendoderm in defined conditions utilizing single-cell seeding (SCS) and BMP4 and Activin A (BA) treatment. BA treatment was readily incorporated into existing protocols for chondrogenic and endothelial progenitor cell differentiation, while fine-tuning of BA conditions facilitated definitive endoderm commitment. After prolonged differentiation in vitro or in vivo, BA pretreatment resulted in higher mesoderm and endoderm levels at the expense of ectoderm formation. These data demonstrate that SCS with BA treatment is a powerful method for induction of mesendoderm that can be adapted for use in mesoderm and endoderm differentiation.

Rotary suspension culture enhances the efficiency, yield, and homogeneity of embryoid body differentiation.

Embryonic stem (ES) cells hold great promise as a robust cell source for cell-based therapies and as a model of early embryonic development. Current experimental methods for differentiation of ES cells via embryoid body (EB) formation are either inherently incapable of larger-scale production or exhibit limited control over cell aggregation during EB formation and subsequent EB agglomeration. This report describes and characterizes a novel method for formation of EBs using rotary orbital motion that simultaneously addresses both concerns. EBs formed under rotary suspension conditions were compared with hanging-drop and static EBs for efficiency of EB formation, cell and EB yield, homogeneity of EB size and shape, and gene expression. A 20-fold enhancement in the number of cells incorporated into primitive EBs in rotary versus static conditions was detected after the first 12 hours, and a fourfold increase in total cell yield was achieved by rotary culture after 7 days. Morphometric analysis of EBs demonstrated formation and maintenance of a more uniform EB population under rotary conditions compared with hanging-drop and static conditions. Quantitative gene expression analysis indicated that rotary EBs differentiated normally, on the basis of expression of ectoderm, endoderm, and mesoderm markers. Increased levels of endoderm gene expression, along with cystic EB formation, indicated by histological examination, suggested that differentiation was accelerated in rotary EBs. Thus, the rotary suspension culture method can produce a highly uniform population of efficiently differentiating EBs in large quantities in a manner that can be easily implemented by basic research laboratories conducting ES cell differentiation studies.

Derivation and expansion of PAX7-positive muscle progenitors from human and mouse embryonic stem cells.

Cell therapies treating pathological muscle atrophy or damage requires an adequate quantity of muscle progenitor cells (MPCs) not currently attainable from adult donors. Here, we generate cultures of approximately 90% skeletal myogenic cells by treating human embryonic stem cells (ESCs) with the GSK3 inhibitor CHIR99021 followed by FGF2 and N2 supplements. Gene expression analysis identified progressive expression of mesoderm, somite, dermomyotome, and myotome markers, following patterns of embryonic myogenesis. CHIR99021 enhanced transcript levels of the pan-mesoderm gene T and paraxial-mesoderm genes MSGN1 and TBX6; immunofluorescence confirmed that 91% ± 6% of cells expressed T immediately following treatment. By 7 weeks, 47% ± 3% of cells were MYH(+ve) myocytes/myotubes surrounded by a 43% ± 4% population of PAX7(+ve) MPCs, indicating 90% of cells had achieved myogenic identity without any cell sorting. Treatment of mouse ESCs with these factors resulted in similar enhancements of myogenesis. These studies establish a foundation for serum-free and chemically defined monolayer skeletal myogenesis of ESCs.

Incorporation of biomaterials in multicellular aggregates modulates pluripotent stem cell differentiation.

Biomaterials are increasingly being used to engineer the biochemical and biophysical properties of the extracellular stem cell microenvironment in order to tailor niche characteristics and direct cell phenotype. To date, stem cell-biomaterial interactions have largely been studied by introducing stem cells into artificial environments, such as 2D cell culture on biomaterial surfaces, encapsulation of cell suspensions within hydrogel materials, or cell seeding on 3D polymeric scaffolds. In this study, microparticles fabricated from different materials, such as agarose, PLGA and gelatin, were stably integrated, in a dose-dependent manner, within aggregates of pluripotent stem cells (PSCs) prior to differentiation as a means to directly examine stem cell-biomaterial interactions in 3D. Interestingly, the presence of the materials within the stem cell aggregates differentially modulated the gene and protein expression patterns of several differentiation markers without adversely affecting cell viability. Microparticle incorporation within 3D stem cell aggregates can control the spatial presentation of extracellular environmental cues (i.e. soluble factors, extracellular matrix and intercellular adhesion molecules) as a means to direct the differentiation of stem cells for tissue engineering and regenerative medicine applications. In addition, these results suggest that the physical presence of microparticles within stem cell aggregates does not compromise PSC differentiation, but in fact the choice of biomaterials can impact the propensity of stem cells to adopt particular differentiated cell phenotypes.

Magnetic manipulation and spatial patterning of multi-cellular stem cell aggregates.

The controlled assembly and organization of multi-cellular systems to mimic complex tissue structures is critical to the engineering of tissues for therapeutic and diagnostic applications. Recent advances in micro-scale technologies to control multi-cellular aggregate formation typically require chemical modification of the interface between cells and materials and lack multi-scale flexibility. Here we demonstrate that simple physical entrapment of magnetic microparticles within the extracellular space of stem cells spheroids during initial formation enables scaffold-free immobilization, translocation and directed assembly of multi-cellular aggregates across multiple length and time scales, even under dynamic suspension culture conditions. The response of aggregates to externally applied magnetic fields was a direct function of microparticle incorporation, allowing for rapid and transient control of the extracellular environment as well as separation of heterogeneous populations. In addition, spatial patterning of heterogeneous spheroid populations as well as individual multi-cellular aggregates was readily achieved by imposing temporary magnetic fields. Overall, this approach provides novel routes to examine stem cell differentiation and tissue morphogenesis with applications that encompass the creation of new model systems for developmental biology, scaffold-free tissue engineering strategies and scalable bioprocessing technologies.

Microsphere size effects on embryoid body incorporation and embryonic stem cell differentiation.

Differentiation of pluripotent embryonic stem cells (ESCs) in vitro via multicellular spheroids called embryoid bodies (EBs) is commonly performed to model aspects of early mammalian development and initiate differentiation of cells for regenerative medicine technologies. However, the three-dimensional nature of EBs poses unique challenges for directed ESC differentiation, including limited diffusion into EBs of morphogenic molecules capable of specifying cell fate. Degradable polymer microspheres incorporated within EBs can present morphogenic molecules to ESCs in a spatiotemporally controlled manner to more efficiently direct differentiation. In this study, the effect of microsphere size on incorporation into EBs and ESC differentiation in response to microsphere- mediated morphogen delivery were assessed. PLGA microspheres with mean diameters of 1, 3, or 11 microm were fabricated and mixed with ESCs during EB formation. Smaller microspheres were incorporated more efficiently throughout EBs than larger microspheres, and regardless of size, retained for at least 10 days of differentiation. Retinoic acid release from incorporated microspheres induced EB cavitation in a size-dependent manner, with smaller microspheres triggering accelerated and more complete cavitation than larger particles. These results demonstrate that engineering the size of microsphere delivery vehicles incorporated within stem cell environments can be used to modulate the course of differentiation.

Engineering the embryoid body microenvironment to direct embryonic stem cell differentiation.

Embryonic stem cells (ESCs) are pluripotent cells capable of differentiating into all somatic and germ cell types. The intrinsic ability of pluripotent cells to generate a vast array of different cells makes ESCs a robust resource for a variety of cell transplantation and tissue engineering applications, however, efficient and controlled means of directing ESC differentiation is essential for the development of regenerative therapies. ESCs are commonly differentiated in vitro by spontaneously self-assembling in suspension culture into 3D cell aggregates called embryoid bodies (EBs), which mimic many of the hallmarks of early embryonic development, yet the 3D organization and structure of EBs also presents unique challenges to effectively direct the differentiation of the cells. ESC differentiation is strongly influenced by physical and chemical signals comprising the local extracellular microenvironment, thus current methods to engineer EB differentiation have focused primarily on spatially controlling EB size, adding soluble factors to the media, or culturing EBs on or within natural or synthetic extracellular matrices. Although most such strategies aim to influence differentiation from the exterior of EBs, engineering the microenvironment directly within EBs enables new opportunities to efficiently direct the fate of the cells by locally controlling the presentation of morphogenic cues.

Homogeneous and organized differentiation within embryoid bodies induced by microsphere-mediated delivery of small molecules.

Cell specification and tissue formation during embryonic development are precisely controlled by the local concentration and temporal presentation of morphogenic factors. Similarly, pluripotent embryonic stem cells can be induced to differentiate in vitro into specific phenotypes in response to morphogen treatment. Embryonic stem cells (ESCs) are commonly differentiated as 3D spheroids referred to as embryoid bodies (EBs); however, differentiation of cells within EBs is typically heterogeneous and disordered. In this study, we demonstrate that in contrast to soluble morphogen treatment, delivery of morphogenic factors directly within EB microenvironments in a spatiotemporally controlled manner using polymer microspheres yields homogeneous, synchronous and organized ESC differentiation. Degradable PLGA microspheres releasing retinoic acid were incorporated directly within EBs and induced the formation of cystic spheroids uniquely resembling the phenotype and structure of early streak mouse embryos (E6.75), with an exterior of FOXA2+ visceral endoderm enveloping an epiblast-like layer of OCT4+ cells. These results demonstrate that controlled morphogen presentation to stem cells using degradable microspheres more efficiently directs cell differentiation and tissue formation than simple soluble delivery methods and presents a unique route to study the spatiotemporal effects of morphogenic factors on embryonic developmental processes in vitro.