A Water Soluble 2-Phenyl-5-(pyridin-3-yl)-1,3,4-oxadiazole Based Probe: Antimicrobial Activity and Colorimetric/Fluorescence pH Response.

The growing demand of responsive tools for biological and biomedical applications pushes towards new low-cost probes easy to synthesize and versatile. Current optical probes are theranostic tools simultaneously responsive to biological parameters/analyte and therapeutically operating. Among the optical methods for pH monitoring, simple small organic molecules including multifunctional probes for simultaneous biological activity being highly desired by scientists and technicians. Here, we present a novel pH-responsive probe with a three-ring heteroaromatic pattern and a flexible cationic chain. The novel molecule shows real-time naked-eye colorimetric and fluorescence response in the slightly acidic pH range besides its excellent solubility both in the organic phase and in water. In addition, the small probe shows significant antibacterial activity, particularly against Escherichia coli. Single-crystal X-ray study and density functional theory (DFT) calculations rationalize the molecule spectroscopic response. Finally, molecular dynamics (MD) elucidate the interactions between the probe and a model cell membrane.

Thermo-Induced Fluorochromism in Two AIE Zinc Complexes: A Deep Insight into the Structure-Property Relationship.

Solid-state emitters exhibiting mechano-fluorochromic or thermo-fluorochromic responses represent the foundation of smart tools for novel technological applications. Among fluorochromic (FC) materials, solid-state emissive coordination complexes offer a variety of fluorescence responses related to the dynamic of noncovalent metal-ligand coordination bonds. Relevant FC behaviour can result from the targeted choice of metal cation and ligands. Herein, we report the synthesis and characterization of two different colour emitters consisting of zinc complexes obtained from N,O bidentate ligands with different electron-withdrawing substituents. The two complexes are blue and orange solid-state fluorophores, respectively, highly responsive to thermal and mechanical stress. These emitters show a very different photoluminescent (PL) pattern as recorded before and after the annealing treatment. Through X-ray structural analysis combined with thermal analysis, infrared (IR) spectroscopy, PL, and DFT simulation we provide a comprehensive analysis of the structural feature involved in the fluorochromic response. Notably, we were able to correlate the on-off thermo-fluorochromism of the complexes with the structural rearrangement at the zinc coordination core.

A Novel L-Shaped Fluorescent Probe for AIE Sensing of Zinc (II) Ion by a DR/NIR Response.

In the field of optical sensors, small molecules responsive to metal cations are of current interest. Probes displaying aggregation-induced emission (AIE) can solve the problems due to the aggregation-caused quenching (ACQ) molecules, scarcely emissive as aggregates in aqueous media and in tissues. The addition of a metal cation to an AIE ligand dissolved in solution can cause a "turn-on" of the fluorescence emission. Half-cruciform-shaped molecules can be a winning strategy to build specific AIE probes. Herein, we report the synthesis and characterization of a novel L-shaped fluorophore containing a benzofuran core condensed with 3-hydroxy-2-naphthaldehyde crossed with a nitrobenzene moiety. The novel AIE probe produces a fast colorimetric and fluorescence response toward zinc (II) in both in neutral and basic conditions. Acting as a tridentate ligand, it produces a complex with enhanced and red-shifted emission in the DR/NIR spectral range. The AIE nature of both compounds was examined on the basis of X-ray crystallography and DFT analysis.

Spectroscopic Behaviour of Two Novel Azobenzene Fluorescent Dyes and Their Polymeric Blends.

Two novel symmetrical bis-azobenzene red dyes ending with electron-withdrawing or donor groups were synthesized. Both chromophores display good solubility, excellent chemical, and thermal stability. The two dyes are fluorescent in solution and in the solid-state. The spectroscopic properties of the neat crystalline solids were compared with those of doped blends of different amorphous matrixes. Blends of non-conductive and of emissive and conductive host polymers were formed to evaluate the potential of the azo dyes as pigments and as fluorophores. Both in absorbance and emission, the doped thin layers have CIE coordinates in the spectral region from yellow to red. The fluorescence quantum yield measured for the brightest emissive blend reaches 57%, a remarkable performance for a steadily fluorescent azo dye. A DFT approach was employed to examine the frontier orbitals of the two dyes.

An Amphiphilic Pyridinoyl-hydrazone Probe for Colorimetric and Fluorescence pH Sensing.

A new pH sensor based on a substituted aroylhydrazide with a flexible side chain and a terminal trimethyl ammonium group (PHA+) was designed and synthesized. The terminal quaternary ammonium guarantees excellent solubility in water. At the same time, the probe is very soluble in hydrophobic envirornments. The pyridinoyl-hydrazone moiety acts as the pH-sensitive fluorophore/chromophore probe. Extensive physicochemical characterization has been performed on the bromide salt PHABr. DFT calculations, based on single-crystal X-ray data, permitted to rationalize the optical behavior. Molecular dynamics simulations permitted to clarify the mode of interaction with lipid membrane. The ability of the probe to change color and fluorescence in response to different pH and media of different polarity has been investigated. PHABr shows a remarkable pH-dependent behavior in both absorption and fluorescence spectra with high sensitivity and strong on-off switch effect at neutral pH, perceptible even to the naked eye.

AIE/ACQ Effects in Two DR/NIR Emitters: A Structural and DFT Comparative Analysis.

The effects of aggregation-induced emission (AIE) and of aggregation caused quenching (ACQ) were observed and discussed on two solid materials based on a phenylenevinylene (PV) and a dicyano-PV structure. The brightest emitter in solid films shows a high fluorescence quantum yield in the deep red/near IR (DR/NIR) region (75%). The spectroscopic properties of the two crystalline solids have been described and compared in terms of crystallographic data and time dependent DFT analysis. The influence of the cyano-substituents on AIE/ACQ mechanism activation was discussed.

Solid-State Highly Efficient DR Mono and Poly-dicyano-phenylenevinylene Fluorophores.

An efficient deep red (DR)-emitting organic solid based on a dicyano-phenylenevinylene derivative was reported. The structural and spectroscopic properties of the solid have been described in terms of crystallographic data and time-dependent DFT analysis. A noteworthy fluorescence quantum yield of 53% was observed for the brightest emitter cast into solid films. This result can be explained in terms of the aggregation-induced emission (AIE) effect.

Synthesis and Antimicrobial Studies of New Antibacterial Azo-Compounds Active against Staphylococcus aureus and Listeria monocytogenes.

Some novel (phenyl-diazenyl)phenols (4a-m) were designed and synthesized to be evaluated for their antibacterial activity. Starting from an active previously-synthesized azobenzene chosen as lead compound, we introduced some modifications and optimization of the structure, in order to improve solubility and drug conveyance. Structures of all newly-synthesized compounds were confirmed by ¹H nuclear magnetic resonance (NMR), mass spectrometry, and UV-Vis spectroscopy. Antibacterial activity of the new compounds was tested with the dilution method against the bacteria strains Listeria monocytogenes, Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa PAO1. All the compounds were selectively active against Gram-positive bacteria. In particular, compounds 4d, 4h, and 4i showed the highest activity against S. aureus and Listeria monocytogenes, reaching remarkable MIC100 values of 4 µg/mL and 8 µg/mL. The relationship between antimicrobial activity and compound structure has suggested that the presence of hydroxyl groups seems to be essential for antimicrobial activity of phenolic compounds.

Eumelanin pigment precursor 2-carboxy-5,6-dihydroxyindole and 2-amino-6-methylbenzothiazole chromophore integration towards melanin inspired chemoresponsive materials: the case of the Zn2+ ion.

The 2-amino-6-methylbenzothiazole chromophore is introduced at the carboxyl group of the melanin precursor 2-carboxy-5,6-dihydroxyindole achieving a novel dihydroxyindole derivative with metal chelation properties not depending on the catechol moiety. In view of potential exploitation in charge storage systems, systematic investigation of the interaction of the new amide derivative with metal ions is carried out, in comparison with that of the parent 2-carboxy-5,6-dihydroxyindole, and the stoichiometry of the zinc-amide complex is determined.

Coating of Flexible PDMS Substrates through Matrix-Assisted Pulsed Laser Evaporation (MAPLE) with a New-Concept Biocompatible Graphenic Material.

In this study, matrix-assisted pulsed laser evaporation (MAPLE) was used to deposit graphene-like materials (GL), a new class of biocompatible graphene-related materials (GRMs) obtained from a controlled top-down demolition of a carbon black, on silicone slices to test their potential use as functional coating on invasive medical devices as indwelling urinary catheters. Results indicate that the relevant chemical-physical features of the deposit (controlled by FTIR and AFM) were maintained after MAPLE deposition. After deposition, GL films underwent a biological survey toward target cellular lines (murine fibroblast NIH3T3, human keratinocytes HaCAT and the human cervical adenocarcinoma epithelial-like HeLa). Results indicate that the GL films did not lead to any perturbations in the different biological parameters evaluated. The presented results and the possibility to further functionalize the GL or combine them with other functional materials in a hybrid fashion to assure a tighter adhesion onto the substrate for use in harsh conditions open the door to practical applications of these new-concept medical devices (drug delivery, next generation flexible devices, multifunctional coatings) paving the way to the prevention of nosocomial infections driven by catheterization through antibiotics-free approaches.

Stimuli-Responsive Zinc (II) Coordination Polymers: A Novel Platform for Supramolecular Chromic Smart Tools.

The unique role of the zinc (II) cation prompted us to cut a cross-section of the large and complex topic of the stimuli-responsive coordination polymers (CPs). Due to its flexible coordination environment and geometries, easiness of coordination-decoordination equilibria, "optically innocent" ability to "clip" the ligands in emissive architectures, non-toxicity and sustainability, the zinc (II) cation is a good candidate for building supramolecular smart tools. The review summarizes the recent achievements of zinc-based CPs as stimuli-responsive materials able to provide a chromic response. An overview of the past five years has been organised, encompassing 1, 2 and 3D responsive zinc-based CPs; specifically zinc-based metallorganic frameworks and zinc-based nanosized polymeric probes. The most relevant examples were collected following a consequential and progressive approach, referring to the structure-responsiveness relationship, the sensing mechanisms, the analytes and/or parameters detected. Finally, applications of highly bioengineered Zn-CPs for advanced imaging technique have been discussed.

Assessment of Copper and Heavy Metals in Family-Run Vineyard Soils and Wines of Campania Region, South Italy.

Copper-based phytosanitary treatments are widely employed in viticulture for combating the fungal diseases of European grape (Vitis vinifera L.). Herein we evaluated copper accumulation in the soil of a 50-year-old still productive vineyard in South Italy in comparison with samples taken from a 'control' area in which grapevines had never been cultivated, as well from an abandoned vineyard, now planted with cereals and forage crops, both close to the main area under investigation. Even though the heavy metal contents detected were not of concern for soils nor for wine, Cu accumulates in the soil in amounts significantly higher than the (grapevine free) control and remains at detectable concentrations also in abandoned vineyards where spraying activities had ceased about 20 years before this study. Despite the long Cu residence times in soil, the wine produced with grapes of the same vineyard showed Cu levels low enough to be safely used for human consumption, probably due to mechanisms of metal precipitation occurring during wine maturation, which are typically accompanied by sedimentation processes in artisanal production. However, this should not diminish the urgency of decreasing the copper usage as antifungal remedy in viticulture to prevent copper contamination of the agricultural soils.

Evaluating In Silico the Potential Health and Environmental Benefits of Houseplant Volatile Organic Compounds for an Emerging 'Indoor Forest Bathing' Approach.

The practice of spending time in green areas to gain the health benefits provided by trees is well known, especially in Asia, as 'forest bathing', and the consequent protective and experimentally detectable effects on the human body have been linked to the biogenic volatile organic compounds released by plants. Houseplants are common in houses over the globe and are particularly appreciated for aesthetic reasons as well for their ability to purify air from some environmental volatile pollutants indoors. However, to the best of our knowledge, no attempt has been made to describe the health benefits achievable from houseplants thanks to the biogenic volatile organic compounds released, especially during the day, from some of them. Therefore, we performed the present study, based on both a literature analysis and in silico studies, to investigate whether the volatile compounds and aerosol constituents emitted by some of the most common houseplants (such as peace lily plant, Spathiphyllum wallisii, and iron plant, Aspidistra eliator) could be exploited in 'indoor forest bathing' approaches, as proposed here for the first time not only in private houses but also public spaces, such as offices, hospitals, and schools. By using molecular docking (MD) and other in silico methodologies for estimating vapor pressures and chemico-physical/pharmacokinetic properties prediction, we found that ß-costol is an organic compound, emitted in appreciable amounts by the houseplant Spathiphyllum wallisii, endowed with potential antiviral properties as emerged by our MD calculations in a SARS-CoV-2 Mpro (main protease) inhibition study, together with sesquirosefuran. Our studies suggest that the anti-COVID-19 potential of these houseplant-emitted compounds is comparable or even higher than known Mpro inhibitors, such as eugenol, and sustain the utility of houseplants as indoor biogenic volatile organic compound emitters for immunity boosting and health protection.

Novel Solid-State Emissive Polymers and Polymeric Blends from a T-Shaped Benzodifuran Scaffold: A Comparative Study.

Two novel polyimines were synthesized from a benzodifuran based diamino monomer and two dialdehydes bearing bulky groups and a flexible spacer. The polymers display tuned luminescence performance according to the presence of half-salen groups. The effect of the intramolecular bond on the emission properties were examined. Two model compounds, replicating the same emissive Schiff base cores, were synthetized. From the models, dye-doped blends in the fluorophore/matrix ratio, resembling the polymers, were produced. Amorphous thin films of the covalent polymers and the polymeric blends were obtained by spin-coating technique. The Photoluminescent (PL) response of the different macromolecular systems were qualitatively and quantitatively examined and compared.

Study of the Interaction of a Novel Semi-Synthetic Peptide with Model Lipid Membranes.

Most linear peptides directly interact with membranes, but the mechanisms of interaction are far from being completely understood. Here, we present an investigation of the membrane interactions of a designed peptide containing a non-natural, synthetic amino acid. We selected a nonapeptide that is reported to interact with phospholipid membranes, ALYLAIRKR, abbreviated as ALY. We designed a modified peptide (azoALY) by substituting the tyrosine residue of ALY with an antimicrobial azobenzene-bearing amino acid. Both of the peptides were examined for their ability to interact with model membranes, assessing the penetration of phospholipid monolayers, and leakage across the bilayer of large unilamellar vesicles (LUVs) and giant unilamellar vesicles (GUVs). The latter was performed in a microfluidic device in order to study the kinetics of leakage of entrapped calcein from the vesicles at the single vesicle level. Both types of vesicles were prepared from a 9:1 (mol/mol) mixture of POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) and POPG (1-palmitoyl-2-oleoyl-sn-glycero-3-phospho(1'-rac-glycerol). Calcein leakage from the vesicles was more pronounced at a low concentration in the case of azoALY than for ALY. Increased vesicle membrane disturbance in the presence of azoALY was also evident from an enzymatic assay with LUVs and entrapped horseradish peroxidase. Molecular dynamics simulations of ALY and azoALY in an anionic POPC/POPG model bilayer showed that ALY peptide only interacts with the lipid head groups. In contrast, azoALY penetrates the hydrophobic core of the bilayers causing a stronger membrane perturbation as compared to ALY, in qualitative agreement with the experimental results from the leakage assays.

A Highly Efficient White Luminescent Zinc (II) Based Metallopolymer by RGB Approach.

Three aryl-hydrazone O,N,O tridentate ligands with a different electron-withdrawing substituent were prepared. The introduction of a flexible charged chain in the ligands guaranteed solubility in many organic solvents and in water. The increasing withdrawing aptitude of the substituents red-shifted the emission in the correspondent metallopolymers. The metallated polymers were obtained by grafting ligand-zinc (II) coordination fragments onto commercial poly-(4-vinylpyridine). Metallopolymers thin films exhibited red, green and blue emission colors defined by Commission Internationale d'Eclairage (CIE) coordinates and medium to excellent photoluminescence (PL) quantum yields (PLQYs) comparable with other highly-performing active materials for Light-Emitting Diodes (LEDs). By grafting a suitable mix of the three different coordination pendants, an efficient single-component white emissive metallopolymer with CIE (0.30, 0.31) was prepared. Thanks to the charged moiety, the polymers resulted miscible with an ionic liquid. The addition produced homogeneous polymeric layers with unaltered PL performances, potentially employable in Light-emitting Electrochemical Cells (LECs).

Crystal structures of butyl 2-amino-5-hy-droxy-4-(4-nitro-phen-yl)benzo-furan-3-carboxyl-ate and 2-meth-oxy-ethyl 2-amino-5-hy-droxy-4-(4-nitro-phen-yl)benzo-furan-3-carboxyl-ate.

The title benzo-furan derivatives 2-amino-5-hy-droxy-4-(4-nitro-phen-yl)benzo-furan-3-carboxyl-ate (BF1), C19H18N2O6, and 2-meth-oxy-ethyl 2-amino-5-hy-droxy-4-(4-nitro-phen-yl)benzo-furan-3-carboxyl-ate (BF2), C18H16N2O7, recently attracted attention because of their promising anti-tumoral activity. BF1 crystallizes in the space group P . BF2 in the space group P21/c. The nitro-phenyl group is inclined to benzo-furan moiety with a dihedral angle between their mean planes of 69.2 (2)° in BF1 and 60.20 (6)° in BF2. A common feature in the mol-ecular structures of BF1 and BF2 is the intra-molecular N-H⋯Ocarbon-yl hydrogen bond. In the crystal of BF1, the mol-ecules are linked head-to-tail into a one-dimensional hydrogen-bonding pattern along the a-axis direction. In BF2, pairs of head-to-tail hydrogen-bonded chains of mol-ecules along the b-axis direction are linked by O-H⋯Ometh-oxy hydrogen bonds. In BF1, the butyl group is disordered over two orientations with occupancies of 0.557 (13) and 0.443 (13).

Novel Dicyano-Phenylenevinylene Fluorophores for Low-Doped Layers: A Highly Emissive Material for Red OLEDs.

Two efficient deep red (DR)-emitting organic dicyano-phenylenevinylene derivatives with terminal withdrawing or donor groups were synthesized. The spectroscopic properties of the neat solids and the low-doped layers in polystyrene or polyvinylcarbazole host matrixes were analyzed, and the luminescence performance was explained using density functional theory (DFT) analysis. A noteworthy 89% fluorescence quantum yield was observed for the brightest red-emissive polyvinylcarbazole (PVK) blend. This result pushed us to successfully produce an emissive red organic light-emitting device (OLED) as a preliminary feasibility test.

The Effect of Bulky Substituents on Two π-Conjugated Mesogenic Fluorophores. Their Organic Polymers and Zinc-Bridged Luminescent Networks.

From a dicyano-phenylenevinylene (PV) and an azobenzene (AB) skeleton, two new symmetrical salen dyes were obtained. Terminal bulky substituents able to reduce intermolecular interactions and flexible tails to guarantee solubility were added to the fluorogenic cores. Photochemical performances were investigated on the small molecules in solution, as neat crystals and as dopants in polymeric matrixes. High fluorescence quantum yield in the orange-red region was observed for the brightest emissive films (88% yield). The spectra of absorption and fluorescence were predicted by Density Functional Theory (DFT) calculations. The predicted energy levels of the frontier orbitals are in good agreement with voltammetry and molecular spectroscopy measures. Employing the two dyes as dopants of a nematic polymer led to remarkable orange or yellow luminescence, which dramatically decreases in on-off switch mode after liquid crystal (LC) order was lost. The fluorogenic cores were also embedded in organic polymers and self-assembly zinc coordination networks to transfer the emission properties to a macro-system. The final polymers emit from red to yellow both in solution and in the solid state and their photoluminescence (PL) performance are, in some cases, enhanced when compared to the fluorogenic cores.

Use of diode laser 980 nm as adjunctive therapy in the treatment of chronic periodontitis. A randomized controlled clinical trial.

The primary goal of periodontal therapy is the removal of supra and subgingival bacterial deposits by mechanical debridement consisting in scaling and root-planing (SRP) using manual or power-driven instruments. The complete removal of bacteria and their toxins from periodontal pockets is not always achieved with conventional mechanical treatment. The use of lasers as an adjunctive therapy for periodontal disease may improve tissue healing by bactericidal and detoxification effects. The aim of this study was to compare the effectiveness of Diode laser used as adjunctive therapy of SRP to that of SRP alone for non surgical periodontal treatment in patients with chronic periodontitis. Nineteen pairs of teeth with untreated chronic periodontitis were selected in 13 patients and randomly treated by SRP alone (control group) or by SRP + laser irradiation (test group). Clinical measurements (PPD, CAL, BOP, GI, PI) were performed before treatment at baseline (T0) and at T1 (after 4 weeks), T2 (8 weeks), T3 (12 weeks), T4 (6 months). Subgingival plaque samples were taken at baseline and after treatment and examined for 8 periopathogens bacteria using PCR technique. The present study showed that the additional treatment with diode laser may lead to a slightly improvement of clinical parameters, whereas no significant differences between test and control group in reduction of periodontopathogens were found.