RESUMO
An automated method for registering B-mode ultrasound (US) and magnetic resonance imaging (MRI) of the carotid arteries is proposed. The registration uses geometric features, namely, lumen centerlines and lumen segmentations, which are extracted fully automatically from the images after manual annotation of three seed points in US and MRI. The registration procedure starts with alignment of the lumen centerlines using a point-based registration algorithm. The resulting rigid transformation is used to initialize a rigid and subsequent non-rigid registration procedure that jointly aligns centerlines and segmentations by minimizing a weighted sum of the Euclidean distance between centerlines and the dissimilarity between segmentations. The method was evaluated in 28 carotid arteries from eight patients and six healthy volunteers. First, the automated US lumen segmentation method was validated and optimized in a cross-validation experiment. Next, the effect of the weighting parameter of the proposed registration dissimilarity metric and the control point spacing in the non-rigid registration was evaluated. Finally, the proposed registration method was evaluated in comparison to an existing intensity-and-point-based method, a registration using only the centerlines and a registration using manual US lumen segmentations. Registration accuracy was measured in terms of the mean surface distance between manual US segmentations and the registered MRI segmentations. The average mean surface distance was 0.78 ± 0.34 mm for all subjects, 0.65 ± 0.09 mm for healthy volunteers and 0.87 ± 0.42 mm for patients. The results for the complete set were significantly better (Wilcoxon test, p < 0.01) than the results for the intensity-and-point-based method and the centerline-based registration method. We conclude that the proposed method can robustly and accurately register US and MR images of the carotid artery, allowing multimodal analysis of the carotid plaque to improve plaque assessment.
Assuntos
Artérias Carótidas/diagnóstico por imagem , Doenças das Artérias Carótidas/diagnóstico por imagem , Interpretação de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Imageamento por Ressonância Magnética/métodos , Ultrassonografia/métodos , Algoritmos , Estudos de Coortes , Humanos , Estudos ProspectivosRESUMO
Carotid plaque segmentation in B-mode ultrasound (BMUS) and contrast-enhanced ultrasound (CEUS) is crucial to the assessment of plaque morphology and composition, which are linked to plaque vulnerability. Segmentation in BMUS is challenging because of noise, artifacts and echo-lucent plaques. CEUS allows better delineation of the lumen but contains artifacts and lacks tissue information. We describe a method that exploits the combined information from simultaneously acquired BMUS and CEUS images. Our method consists of non-rigid motion estimation, vessel detection, lumen-intima segmentation and media-adventitia segmentation. The evaluation was performed in training (n = 20 carotids) and test (n = 28) data sets by comparison with manually obtained ground truth. The average root-mean-square errors in the training and test data sets were comparable for media-adventitia (411 ± 224 and 393 ± 239 µm) and for lumen-intima (362 ± 192 and 388 ± 200 µm), and were comparable to inter-observer variability. To the best of our knowledge, this is the first method to perform fully automatic carotid plaque segmentation using combined BMUS and CEUS.
Assuntos
Artérias Carótidas/diagnóstico por imagem , Doenças das Artérias Carótidas/diagnóstico por imagem , Meios de Contraste , Aumento da Imagem , Processamento de Imagem Assistida por Computador/métodos , Placa Aterosclerótica/diagnóstico por imagem , Algoritmos , Espessura Intima-Media Carotídea , Humanos , Variações Dependentes do Observador , Reprodutibilidade dos TestesRESUMO
In standard B-mode ultrasound (BMUS), segmentation of the lumen of atherosclerotic carotid arteries and studying the lumen geometry over time are difficult owing to irregular lumen shapes, noise, artifacts, and echolucent plaques. Contrast enhanced ultrasound (CEUS) improves lumen visualization, but lumen segmentation remains challenging owing to varying intensities, CEUS-specific artifacts and lack of tissue visualization. To overcome these challenges, we propose a novel method using simultaneously acquired BMUS&CEUS image sequences. Initially, the method estimates nonrigid motion (NME) from the image sequences, using intensity-based image registration. The motion-compensated image sequence is then averaged to obtain a single "epitome" image with improved signal-to-noise ratio. The lumen is segmented from the epitome image through an intensity joint-histogram classification and a graph-based segmentation. NME was validated by comparing displacements with manual annotations in 11 carotids. The average root mean square error (RMSE) was 112±73 µm . Segmentation results were validated against manual delineations in the epitome images of two different datasets, respectively containing 11 (RMSE 191±43 µm) and 10 (RMSE 351±176 µm ) carotids. From the deformation fields, we derived arterial distensibility with values comparable to the literature. The average errors in all experiments were in the inter-observer variability range. To the best of our knowledge, this is the first study exploiting combined BMUS&CEUS images for atherosclerotic carotid lumen segmentation.
Assuntos
Artérias Carótidas/diagnóstico por imagem , Doenças das Artérias Carótidas/diagnóstico por imagem , Processamento de Imagem Assistida por Computador/métodos , Placa Aterosclerótica/diagnóstico por imagem , Bases de Dados Factuais , Humanos , Movimento/fisiologia , UltrassonografiaRESUMO
PURPOSE: To introduce a semiautomatic algorithm to perform the registration of free-hand B-Mode ultrasound (US) and magnetic resonance imaging (MRI) of the carotid artery. METHODS: The authors' approach combines geometrical features and intensity information. The only user interaction consists of placing three seed points in US and MRI. First, the lumen centerlines are used as landmarks for point based registration. Subsequently, in a joint optimization the distance between centerlines and the dissimilarity of the image intensities is minimized. Evaluation is performed in left and right carotids from six healthy volunteers and five patients with atherosclerosis. For the validation, the authors measure the Dice similarity coefficient (DSC) and the mean surface distance (MSD) between carotid lumen segmentations in US and MRI after registration. The effect of several design parameters on the registration accuracy is investigated by an exhaustive search on a training set of five volunteers and three patients. The optimum configuration is validated on the remaining images of one volunteer and two patients. RESULTS: On the training set, the authors achieve an average DSC of 0.74 and a MSD of 0.66 mm on volunteer data. For the patient data, the authors obtain a DSC of 0.77 and a MSD of 0.69 mm. In the independent set composed of patient and volunteer data, the DSC is 0.69 and the MSD is 0.87 mm. The experiments with different design parameters show that nonrigid registration outperforms rigid registration, and that the combination of intensity and point information is superior to approaches that use intensity or points only. CONCLUSIONS: The proposed method achieves an accurate registration of US and MRI, and may thus enable multimodal analysis of the carotid plaque.
Assuntos
Artérias Carótidas/diagnóstico por imagem , Artérias Carótidas/patologia , Imageamento por Ressonância Magnética/métodos , Imagem Multimodal/métodos , Ultrassonografia/métodos , Algoritmos , Aterosclerose/diagnóstico por imagem , Aterosclerose/patologia , Artérias Carótidas/anatomia & histologia , Humanos , Reconhecimento Automatizado de Padrão/métodosRESUMO
We present a new approach for automated segmentation of the carotid lumen bifurcation from 3D free-hand ultrasound using a 3D surface graph cut method. The method requires only the manual selection of single seed points in the internal, external, and common carotid arteries. Subsequently, the centerline between these points is automatically traced, and the optimal lumen surface is found around the centerline using graph cuts. To refine the result, the latter process was iterated. The method was tested on twelve carotid arteries from six subjects including three patients with a moderate carotid artery stenosis. Our method successfully segmented the lumen in all cases. We obtained an average dice overlap with respect to a manual segmentation of 84% for healthy volunteers. For the patient data, we obtained a dice overlap of 66.7%.
Assuntos
Algoritmos , Artérias Carótidas/diagnóstico por imagem , Doenças das Artérias Carótidas/diagnóstico por imagem , Interpretação de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Reconhecimento Automatizado de Padrão/métodos , Ultrassonografia/métodos , Humanos , Aumento da Imagem/métodos , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
PURPOSE: The purpose of this paper is to present a methodology to estimate the carotid artery lumen centerlines in ultrasound (US) images obtained in a free-hand examination. Challenging aspects here are speckle noise in US images, artifacts, and the lack of contrast in the direction orthogonal to the US beam direction. METHOD: An algorithm based on a rough lumen segmentation obtained by robust ellipse fitting was developed to deal with these conditions and estimate the lumen center in 2D B-mode scans. In a free-hand sweep examination, continuous image acquisitions are performed through time when the radiologist moves the probe on the patient's neck. The result is a series of images that show 2D cross-sections of the carotid's morphology. A tracking sensor (Flock of Birds) was attached to the probe and both were connected to a PC executing the Stradwin software, which relates spatial information to the acquisition data of the US probe. The spatial information was combined with the 2D lumen center estimates to provide a centerline in 3D. For validation, 19 carotid scans from 15 different patients were scanned, their centerlines calculated by the algorithm and compared with results acquired by manual annotations. RESULTS: The average Euclidean distance between both among all the examinations was 0.82 mm. For each examination, the percentage of these Euclidean distances below 2 mm was calculated; the average over all examinations was 92%. CONCLUSION: Automated 3D estimation of carotid artery lumen centerlines in free-hand real-time ultrasound is feasible and can be performed with high accuracy. The algorithm is robust enough to keep the centerlines inside the vessel, even in the absence of contrast in parts of the vessel wall.