Medicinal Cannabis: Extended Stability of Cannabis Extracts Produced Using a New Ethanol-based Extraction Method.

Cannabis as a therapeutic agent is increasing in popularity all around the globe, particularly in Western countries, and its potential is now well assessed. On the other hand, each country has its own regulation for the preparation of cannabis macerated oils; in Italy, there are only a few preparation methods allowed. With this work, we aim to perform a stability study of cannabis oils produced with a novel method for the extraction of cannabinoids from cannabis inflorescence. Three different varieties of cannabis were used, with and without the adding of tocopherol acetate as an antioxidant. Cannabinoids were extracted using ethanol at room temperature; then, the solvent was evaporated under reduced pressure and the preparations reconstituted with olive oil. In this work, we assessed the stability of both cannabinoids and terpenes in these formulas over 8 months. Cannabinoid stability was assessed by monitoring the concentrations of THC and CBD, while terpene stability was assessed by monitoring ß-Caryophyllene and α-Humulene concentrations. Stability of the extracts was not influenced by the presence of tocopherol acetate, though refrigeration seems to be detrimental for a long storage of products, especially regarding THC concentrations. The improvements offered by this method reside in the flexibility in controlling the concentration of the extract and the ability to produce highly concentrated oils, alongside the possibility to produce standardized oils despite the variability of the starting plant material.

Impact of Lipid Sources on Quality Traits of Medical Cannabis-Based Oil Preparations.

The feasibility of the use of two lipid sources and their impact on the cannabinoid profile, terpene fingerprint, and degradation products in medical cannabis oil preparations during 3 months of refrigerated storage time were investigated. LCHRMS-Orbitrap® and HS-SPME coupled to GC-MS for the investigation of targeted and untargeted cannabinoids, terpenes, and lipid degradation products in Bedrocan® and Bediol® macerated oils were used as analytical approaches. As regards the cannabinoid trend during 90 days of storage, there were no differences between PhEur-grade olive oil (OOPH) and medium-chain triglycerides oil (MCT oil) coupled to a good stability of preparations for the first 60 days both in Bedrocan® and Bediol® oils. MCT lipid source extracted a significant concentration of terpenes compared to olive oil. Terpenes showed a different scenario since MCT oil displayed the strongest extraction capacity and conservation trend of all compounds during the shelf life. Terpenes remained stable throughout the entire storage period in MCT formulations while a significant decrease after 15 and 30 days in Bediol® and Bedrocan® was observed in olive oil. Therefore, MCT oil could be considered a more suitable lipid source compared to olive oil involved in the extraction of medical cannabis for magistral preparations.

Extraction Method and Analysis of Cannabinoids in Cannabis Olive Oil Preparations.

Recently, an increasing number of pharmacists had to supply medicinal products based on Cannabis sativa L. (Cannabaceae), prescribed by physicians to individual patients. Cannabis olive oil preparation is the first choice as a concentrated extract of cannabinoids, even though standardized operative conditions for obtaining it are still not available. In this work, the impact of temperature and extraction time on the concentration of active principles was studied to harmonize the different compounding methods, optimize the extraction process, and reduce the variability among preparations. Moreover, starting from the cannabis inflorescence, the effect of temperature on tetrahydrocannabinolic acid decarboxylation was evaluated. For the analysis, a GC/MS method, as suggested by the Italian Ministry of Health, and a GC/flame ionization detection method were developed, validated, and compared.

Colon Drug Delivery Systems Based on Swellable and Microbially Degradable High-Methoxyl Pectin: Coating Process and In Vitro Performance.

Oral colon delivery systems based on a dual targeting strategy, harnessing time- and microbiota-dependent release mechanisms, were designed in the form of a drug-containing core, a swellable/biodegradable polysaccharide inner layer and a gastroresistant outer film. High-methoxyl pectin was employed as the functional coating polymer and was applied by spray-coating or powder-layering. Stratification of pectin powder required the use of low-viscosity hydroxypropyl methylcellulose in water solution as the binder. These coatings exhibited rough surfaces and higher thicknesses than the spray-coated ones. Using a finer powder fraction improved the process outcome, coating quality and inherent barrier properties in aqueous fluids. Pulsatile release profiles and reproducible lag phases of the pursued duration were obtained from systems manufactured by both techniques. This performance was confirmed by double-coated systems, provided with a Kollicoat® MAE outer film that yielded resistance in the acidic stage of the test. Moreover, HM pectin-based coatings manufactured by powder-layering, tested in the presence of bacteria from a Crohn's disease patient, showed earlier release, supporting the role of microbial degradation as a triggering mechanism at the target site. The overall results highlighted viable coating options and in vitro release characteristics, sparking new interest in naturally occurring pectin as a coating agent for oral colon delivery.

Catha edulis Leaves: Morphological Characterization and Anti-Inflammatory Properties in an In Vitro Model of Gastritis.

Khat leaves, indigenous to eastern Africa, have been chewed for centuries for their stimulant effects, attributed to alkaloids such as cathinone and cathine. Although associated with gastric disorders like gastritis and gastro-oesophageal reflux disease, the underlying molecular mechanisms remain unclear. This study aimed to examine the morpho-anatomy of khat leaves using light microscopy and histochemistry and to assess the effects of leaf extracts and alkaloids on human gastric epithelial cells (GES-1). The study identified specific cells in the palisade-spongy transition zone as storage sites for psychoactive alkaloids. Leaf extracts were prepared by mimicking the chewing process, including a prolonged salivary phase followed by a gastric phase. Cytotoxicity and cell viability were evaluated using LDH and MTT assays, respectively. Additionally, the impact on IL-8 secretion, a key chemokine in gastric inflammation, was analysed under normal and TNF-α-stimulated conditions. The results showed no increase in cytotoxicity up to 250 µg/mL. However, there was a significant decrease in cell metabolism and a reduction in both basal and TNF-α-induced IL-8 secretion, but cathinone and cathine were inactive. These findings suggest that khat may not directly cause the gastric issues reported in the literature, which would rather be attributed to other confounding factors, highlighting the need for further research to clarify its biological impacts.

The Antioxidant Role of Hemp Phytocomplex in Cannabis Oil-Based Extracts.

The therapeutic use of Cannabis oil extracts is constantly increasing. However, in Italy, they are allowed to be prepared with only a few methods and matrices. With this work, we aimed to assess how the different processes might affect the chemical composition of two different matrices (olive oils and medium chain triglycerides oils - MCT), accounting as variables for both the presence of Cannabis dried apices of the female flower and the adding of tocopherol acetate as an antioxidant. The macerated oils were prepared with four of the methods allowed according to the Italian legislation (Romano-Hazekamp, Cannazza-Citti, SIFAP and Calvi) and analyzed for normal and oxidized tocopherols, oxidized and conjugated fatty acids and volatile carbonyl compounds (VCCs), all using liquid chromatography coupled to UV or PDA detectors. According to our results, neither normal nor oxidized tocopherols are affected by the addition of antioxidants or Cannabis, while the oxidation state (according to the levels of oxidized and conjugated fatty acids) is often altered in either case. The VCCs concentrations, on the other hand, are never notably altered. These results suggest a worthless use of antioxidants in Cannabis macerated oils preparations, while the dried apices of female flowers might have a protective role in maintaining the oil oxidation state.

Ultrasound-Assisted Extraction of Cannabinoids from Cannabis Sativa for Medicinal Purpose.

Over the past 20 years, the interest in Cannabis oily extracts for medicinal use compounded in pharmacy has consistently grown, along with the need to have preparations of adequate quality. Hot maceration (M) is the most frequently used method to compound oily solutions. In this work, we systematically studied the possibility of using an ultrasonic homogenizer and a sonotrode (US) as an alternative extraction method. Oily solutions were prepared using two available varieties of Cannabis for medicinal use, called FM2 and Bedrocan. All preparations resulted with an equivalent content in CBD and THC, with the advantage of a faster process using US. In particular, 10 min sonication at the amplitude optimized for the sonotrode used (2 or 7 mm) provides not statistically different total Δ9-tetrahydrocannabinol (M-FM2: 0.26 ± 0.02 % w/w; US-FM2: 0.19 ± 0.004 % w/w; M-Bedrocan: 1.83 ± 0.17 % w/w; US-Bedrocan: 1.98 ± 0.01 % w/w) and total cannabidiol (M-FM2: 0.59 ± 0.04 % w/w; US-FM2: 0.58 ± 0.01 % w/w) amounts extracted in refined olive oil. It can therefore be confirmed that sonotrode is an efficient and fast extraction technique and its use is without negative consequence on the solvent properties. Despite DSC evidencing that both maceration and sonication modify the Tonset and enthalpy of the event at about -10 °C, the qualitative characteristics of the oil remained constant for the two treatments and similar to the starting material.

Development and Early Identification of Cannabis Chemotypes during the Plant Growth: Current Analytical and Chemometric Approaches.

The identification of cannabis chemotypes at an early stage of a plant's growth, which is long before anthesis, has been intensively pursued in order to control the on-target selection of the cultivar type at the beginning of cultivation, so as to avoid economic and legal drawbacks. However, this issue has been systematically addressed by only few and relatively recent studies of analytical chemistry, possibly because result validations require long-term monitoring of the content and ratio of cannabinoids and terpenes in a great number of plant specimens suitably selected and grown. Here, we review the procedures, the chromatographic techniques and the statistics used in topical investigations during the past thirteen years. Through heterogeneous and not easily comparable approaches, they prove the feasibility of chemotypes safe determination within the first month of a plant's life.

Characterization of chemotype-dependent terpenoids profile in cannabis by headspace gas-chromatography coupled to time-of-flight mass spectrometry.

A headspace method called full evaporation technique (FET) coupled to capillary gas chromatography with a mass detector operating in time-of-flight mode (HS-GC/MS-TOF) was developed to characterize the volatile components, especially the terpene fraction, in Cannabis sativa L. inflorescences. This analytical approach allows to reach a high equilibration temperature, that was able to obtain a complete quantification of the volatile components, providing simple sample preparation, specific qualitative detection, high sensitivity, a precise and accurate quantitative determination. The method was applied to 20 cannabis THC-dominant (I) and 13 CBD-dominant (III) chemotypes. The obtained results were then compared with a series of standard solutions consisting of 35 terpenoids and the mass spectra present in a computer library (NIST). The method has an accuracy of more than 90 % and a limit of detection of 5 ppm for all analytes. The main terpenoids in cannabis are namely (% Chemotypes III vs. I of the total terpene content): ß-Caryophyllene (25 vs. 19.3), ß-Mircene (18.2 vs. 20.0), Terpinolene (12.1 vs. 7.0), α-Humulene (6.5 vs. 8.5), D-Limonene (6.2 vs. 7.2), α-Pinene (5.8 vs. 4.9), ß-Pinene (5.0 vs. 5.8) and cis-ß-Ocimene (4.3 vs. 5.2), whose presence is confirmed in both plant chemotypes and account for more than 80 % of the total terpenoids amount. The terpenoids which can clearly distinguish the chemotype are α-Terpineol, Linalool, DL-Menthol, α-Cedrene, and Borneol. This application provides important data on the secondary volatile components of the plant, which may be useful for a better understanding of the therapeutic properties of the cannabis phyto-complex. It gives the possibility of establishing the aroma profile of different Cannabis batches, allowing possible similarities between samples and identifying any artificial adulteration such as hexyl butyrate ester and it provides the opportunity to highlight some target compounds characteristic of the different chemotypes.

Comparison of Different Analytical Methods for the Determination of Carbon Monoxide in Postmortem Blood.

The determination of carbon monoxide (CO) and carboxyhemoglobin (COHb) is of utmost importance in forensic toxicology to determine the cause of death in cases of CO poisoning, fire, and explosions. To this end, reliable and updated analytical methods are required. In this paper, four different methods for the determination of carbon monoxide in postmortem blood samples were compared: (i) the spectrophotometric determination of COHb applying the method proposed by Rodkey and modified by Beutler-West, (ii) the spectrophotometric determination of CO using a micro-diffusion-based method, (iii) the determination of CO by gas chromatography coupled to a TCD detector, and (iv) the determination of COHb by blood gas analysis. Three postmortem blood samples were analyzed with all methods, and the results were comparable. The applied methodologies showed different features depending on the sensitivity, sample preparation, and volume. The HS-GC/TCD method in our hand was the most appropriate, on postmortem samples, and versatile to apply. Unfortunately, only a limited number of postmortem blood samples were available for this study due to the rarity of that kind of intoxication in our jurisdiction.

Phytocannabinoids Profile in Medicinal Cannabis Oils: The Impact of Plant Varieties and Preparation Methods.

Cannabis (Cannabis sativa L.) is a highly promising medicinal plant with well-documented effectiveness and growing use in the treatment of various medical conditions. Cannabis oils are mostly used in galenic preparations, due to their easy adjustment of the administration dose, together with the enhanced bioavailability of its active compounds. As stated by the Italian Law (9/11/2015, 279 Official Gazette), "to ensure the quality of the oil-based cannabis preparation, the titration of the active substance(s) should be carried out." This study aims to represent the Italian panorama of cannabis oils, which were analyzed (8,201) to determine their cannabinoids content from 2017 to 2019. After application of the exclusion criteria, 4,774 standardized cannabis oils were included, which belong to different medicinal cannabis varieties and prepared according to different extraction methods. The concentration of the principal cannabinoids was taken into account dividing samples on the basis of the main extraction procedures and cannabis varieties. According to this analysis, the most substantial variations should be attributed to different cannabis varieties rather than to their extraction protocols. This study may be the starting point of preparatory pharmacists to assess the correct implementation of the preparation procedures and the quality of the extracts.

The Italian panorama of cannabis light preparation: Determination of cannabinoids by LC-UV.

Cannabis light preparations are products derived or containing dried female inflorescences of Cannabis sativa belonging to Chemotype III (THC/CBD ratio <<1); the total THC (THC+THCA) content in the crop must not exceed 0.2 % in accordance with the EU regulation. In Italy the most recent law for industrial hemp (242/2016) states that only for farmers this limit is extended to 0.6 %. On the other hand, the Ministry of the Interior published a note stating that the sale or the presence in the markets of products (inflorescences, concentrates, essences and resins) or plants with concentrations higher than 0.5 % constitutes a crime. In this confusing legislation framework, it is very important to assess the legality of hemp, determining the total amount of THC. To this end a reliable LC-UV analytical method was developed and validated taking into account parameters such as precision, accuracy, linearity, repeatability of peak area and retention time, limit of detection (LOD= 0.002 % for all cannabinoids) and limit of quantification (LOQ= 0.005 % for all cannabinoids). Accuracy was expressed as the relative error (Er%), while precision was measured as the coefficient of variation (CV%). A CV% below 3 % and Er% between ± 6 % were obtained. The linearity was proven in the concentration range 0.005-1 % for THC, THCA and CBN and 0.005 %-50 % for CBD and CBDA. The analytical method was applied to more than nine hundred cannabis light samples. Based on the law 242/2016, only 18 % of the crops are to be considered legal for the market (total THC<0.2 %). If the circular of the Ministry of the Interior should be converted as a proper law, a substantial amount of cannabis light preparations (24 %) would be considered illegal (total THC>0.5 %). On the other hand, the most of the inflorescences (58 %) have a total THC content comprised between 0.2 % and 0.5 %, and it is not clear whether these products could be sold or not. Moreover, Cannabis light products are not authorized for human consumption, even if everybody knows that this is their primary use. In conclusion, the cannabis light panorama in Italy is quite confused and more specific and clear legislation should be proposed.

A straightforward LC-MS/MS analysis to study serum profile of short and medium chain fatty acids.

Short and medium fatty acids derived from either dietary sources, gut microbiota, and liver production might play a role in the modulation of metabolism and inflammation. The outcome of different autoimmune or inflammatory diseases could be related to microbiota composition and consequently fatty acids production. Their analytical detection, historically completed by GC, was herein investigated using a sensitive approach of LC-MS/MS with straightforward chemical derivatization, using 3-NPH, to the respective acylhydrazines. An isopropanol protein precipitation coupled to LC-MS/MS analysis allowed to separate and quantify butyric, valeric, hexanoic acid and their branched forms. The serum physiological ranges of short and medium chain fatty acids were determined in a heterogeneous healthy population (n = 54) from 18 to 85 years finding a concentration of 935.6 ±â€¯246.5 (butyric), 698.8 ±â€¯204.7 (isobutyric), 62.9 ±â€¯15.3 (valeric), 1155.0 ±â€¯490.4 (isovaleric) and 468.7 ±â€¯377.5 (hexanoic) ng/mL respectively (mean ±â€¯SD). As expected, the biological levels in human serum are reasonably wide-ranging depending on several factors such as body-weight, gut microbiome dysbiosis, gut permeability, cardiometabolic dysregulation, and diet.

Alterations in Circulating Fatty Acid Are Associated With Gut Microbiota Dysbiosis and Inflammation in Multiple Sclerosis.

Background: Butyric acid (BA) is a short-chain fatty acid (SCFA) with anti-inflammatory properties, which promotes intestinal barrier function. Medium-chain fatty acids (MCFA), including caproic acid (CA), promote TH1 and TH17 differentiation, thus supporting inflammation. Aim: Since most SCFAs are absorbed in the cecum and colon, the measurement of BA in peripheral blood could provide information on the health status of the intestinal ecosystem. Additionally, given the different immunomodulatory properties of BA and CA the evaluation of their serum concentration, as well as their ratio could be as a simple and rapid biomarker of disease activity and/or treatment efficacy in MS. Methods: We evaluated serum BA and CA concentrations, immune parameters, intestinal barrier integrity and the gut microbiota composition in patients with multiple sclerosis (MS) comparing result to those obtained in healthy controls. Results: In MS, the concentration of BA was reduced and that of CA was increased. Concurrently, the microbiota was depleted of BA producers while it was enriched in mucin-degrading, pro-inflammatory components. The reduced serum concentration of BA seen in MS patients correlated with alterations of the barrier permeability, as evidenced by the higher plasma concentrations of lipopolysaccharide and intestinal fatty acid-binding protein, and inflammation. Specifically, CA was positively associated with CD4+/IFNγ+ T lymphocytes, and the BA/CA ratio correlated positively with CD4+/CD25high/Foxp3+ and negatively with CD4+/IFNγ+ T lymphocytes. Conclusion: The gut microbiota dysbiosis found in MS is possibly associated with alterations of the SCFA/MCFA ratio and of the intestinal barrier; this could explain the chronic inflammation that characterizes this disease. SCFA and MCFA quantification could be a simple biomarker to evaluate the efficacy of therapeutic and rehabilitation procedures in MS.

Determination of polycyclic aromatic hydrocarbons in lipstick by gas-chromatography coupled to mass spectrometry: A case history.

A suitable extraction protocol based on an liquid-liquid extraction with hexane/dimethyl sulfoxide and a GC/MS method were developed and validated to determine the concentration of six prohibited Polycyclic Aromatic Hydrocarbons (PAHs; benzo[a]pyrene; dibenz[a,h]anthracene; benz[a]anthracene; benzo[j]fluoranthene; benzo[k]fluoranthene; chrysene) in lipsticks commissioned by a cosmetic company to a manufacturer. The lipsticks were produced in four different colors. Analyses confirmed the presence of benz[a]anthracene and chrysene only in two colors in a concentration of 9.3-9.4 ng/g. The concentration of PAHs was 250 times lower than what is considered a toxic level on the basis of what reported in the litaraure and guidances for cosmetic ingredients; therefore we could assume that the risk for consumer health was negligeble.

Determination of daptomycin in human plasma and breast milk by UPLC/MS-MS.

During the lactation, the choice of a proper antibiotic is crucial since the drug can cross into breast milk causing toxicity to the infant. Therefore, an extraction protocol and LC/MS-MS method for the determination of daptomycin in human milk and plasma were developed, validated and applied to a case of a breastfeeding mother affected by a purulent acute soft skin infection treated with daptomycin. Because of daptomycin high protein binding and its high molecular weight, the optimisation of the extraction protocol and analytical conditions were deeply investigated, and several parameters were taken into account: in particular the type of extraction, internal standard, the type of organic modifier, pH of the aqueous solution, and gradient. The use of a protein precipitation protocol coupled to a C8-reverse phase LC-MS/MS allows for a reliable quantification of daptomycin in both plasma (in the range of 19-199 µg/mL) and breast milk (in the range of 0.12-0.32 µg/mL). The determination of milk/plasma (M/P) ratio, which ranged from 0.002 to 0.006, allowed to assess that daptomycin, effective for the mother, was contemporarily safe for the breastfed newborn.

Screening of new psychoactive substances (NPS) by gas-chromatography/time of flight mass spectrometry (GC/MS-TOF) and application to 63 cases of judicial seizure.

A screening method for the separation and identification of more than fifty NPS is proposed. The method is based on fast gas-chromatography/time of flight mass spectrometry (FAST-GC/MS-TOF). Thanks to the shorter and narrower capillary column and to the rapid acquisition of the TOF detector a huge number of compounds are separated in a very short time of analysis (10 min). Only a few peaks were overlapped. The possibility to apply deconvolution by the software of the GC/MS-TOF instrument allowed the unequivocal identification also for the superimposed peaks. Linearity and LOD was studied and the method was applied to 63 cases of powders seized by the judicial authority at the airport of Milano Malpensa in Northern Italy in the period 2014-2017.

Determination of Cyanide by Microdiffusion Technique Coupled to Spectrophotometry and GC/NPD and Propofol by Fast GC/MS-TOF in a Case of Poisoning.

A man was found dead in a hotel located near Rome (Italy). The man was still holding a syringe attached to a butterfly needle inserted in his left forearm vein. The syringe contained a cloudy pinkish fluid. In the hotel room the Police found a broken propofol glass vial plus four sealed ones, an opened NaCl plastic vial and six more still sealed, and a number of packed smaller disposable syringes and needles. An opened plastic bottle containing a white crystalline powder labeled as potassium cyanide was also found. Systematic toxicological analysis (STA), carried out on blood, urine and bile, evidenced only the presence of propofol in blood and bile. So the validated L-L extraction protocol and the GC/MS-TOF method for the confirmation of propofol in the biological fluids optimized in our laboratory was applied to blood, urine and bile. The concentration of propofol resulted to be 0.432 µg/mL in blood and 0.786 µg/mL in bile. The quantitative determination of cyanide in blood was carried out by microdiffusion technique coupled to spectrophotometric detection obtaining a cyanide concentration of 5.3 µg/mL. The quantitative determination was then confirmed by GC/NPD and the concentration of cyanide resulted to be 5.5 µg/mL in blood and 1.7 µg/mL in bile. Data emerging from autopsy findings, histopathological exams and the concentrations of cyanide suggested that death might be due to poisoning caused by cyanide, however, respiratory depression caused by propofol could not be excluded.

Blood cyanide determination in two cases of fatal intoxication: comparison between headspace gas chromatography and a spectrophotometric method.

Blood samples of two cases were analyzed preliminarily by a classical spectrophotometric method (VIS) and by an automated headspace gas chromatographic method with nitrogen-phosphorus detector (HS-GC/NPD). In the former, hydrogen cyanide (HCN) was quantitatively determined by measuring the absorbance of chromophores forming as a result of interaction with chloramine T. In the automated HS-GC/NPD method, blood was placed in a headspace vial, internal standard (acetonitrile) and acetic acid were then added. This resulted in cyanide being liberated as HCN. The spectrophotometric (VIS) and HS-GC/NPD methods were validated on postmortem blood samples fortified with potassium cyanide in the ranges 0.5-10 and 0.05-5 mug/mL, respectively. Detection limits were 0.2 mug/mL for VIS and 0.05 mug/mL for HS-GC/NPD. This work shows that results obtained by means of the two procedures were insignificantly different and that they compared favorably. They are suitable for rapid diagnosis of cyanide in postmortem cases.

Determination of Propofol by GC/MS and Fast GC/MS-TOF in Two Cases of Poisoning.

Two cases of suspected acute and lethal intoxication caused by propofol were delivered by the judicial authority to the Department of Sciences for Health Promotion and Mother-Child Care in Palermo, Sicily. In the first case a female nurse was found in a hotel room, where she lived with her mother; four 10 mg/mL vials and two 20 mg/mL vials of propofol were found near the decedent along with syringes and needles. In the second case a male nurse was found in the operating room of a hospital, along with a used syringe. In both cases a preliminary systematic and toxicological analysis indicated the presence of propofol in the blood and urine. As a result, a method for the quantitative determination of propofol in biological fluids was optimized and validated using a liquid-liquid extraction protocol followed by GC/MS and fast GC/MS-TOF. In the first case, the concentration of propofol in blood was determined to be 8.1 µg/mL while the concentration of propofol in the second case was calculated at 1.2 µg/mL. Additionally, the tissue distribution of propofol was determined for both cases. Brain and liver concentrations of propofol were, respectively, 31.1 and 52.2 µg/g in Case 1 and 4.7 and 49.1 µg/g in Case 2. Data emerging from the autopsy findings, histopathological exams as well as the toxicological results aided in establishing that the deaths were due to poisoning, however, the manner of death in each were different: homicide in Case 1 and suicide in Case 2.