Solvent-Free Enzymatic Synthesis of Dietary Triacylglycerols from Cottonseed Oil in a Fluidized Bed Reactor.

The synthesis of structured lipids with nutraceutical applications, such as medium-long-medium (MLM) triacylglycerols, via modification of oils and fats represents a challenge for the food industry. This study aimed to synthesize MLM-type dietary triacylglycerols by enzymatic acidolysis of cottonseed oil and capric acid (C10) catalyzed by Lipozyme RM IM (lipase from Rhizomucor miehei) in a fluidized bed reactor (FBR). After chemical characterization of the feedstock and hydrodynamic characterization of the reactor, a 22 central composite rotatable design was used to optimize capric acid incorporation. The independent variables were cycle number (20-70) and cottonseed oil/capric acid molar ratio (1:2-1:4). The temperature was set at 45 °C. The best conditions, namely a 1:4 oil/acid molar ratio and 80 cycles (17.34 h), provided a degree of incorporation of about 40 mol%, as shown by compositional analysis of the modified oil. Lipozyme RM IM showed good operational stability (kd = 2.72 × 10-4 h-1, t1/2 = 2545.78 h), confirming the good reuse capacity of the enzyme in the acidolysis of cottonseed oil with capric acid. It is concluded that an FBR configuration is a promising alternative for the enzymatic synthesis of MLM triacylglycerols.

Enzymatic synthesis of structured lipids from grape seed (Vitis vinifera L.) oil in associated packed bed reactors.

Triacylglycerols (TAGs) can be modified to increase the absorption of fatty acids, prevent obesity, and treat fat malabsorption disorders and metabolic diseases. Medium-long-medium (MLM)-type TAGs, which contain medium-chain fatty acids in the sn-1 and sn-3 positions of the glycerol backbone and a long-chain fatty acid in the sn-2 position, show particularly interesting nutritional characteristics. This study aimed to synthesize MLM-type TAGs by enzymatic acidolysis of grape seed oil with medium-chain capric acid (C10:0) in associated packed bed reactors. The reaction was carried out during 120 H, at 45 °C, using lipase from Rhizomucor miehei (Lipozyme® RM IM). The residence time distribution of reagents in the reactor was quantified to evaluate the reactor behavior and to diagnose the existence of preferential paths. The reaction progress was monitored by analyzing TAG composition and, at the steady state (after 48 H of reaction), the incorporation degree achieved a value of 39.91 ± 2.77%. To enhance the capric acid incorporation, an acidolysis reaction in associated packed bed reactors was performed. The results showed a good operational stability of the biocatalyst, revealing values of half-life 209.64 H, 235.63 H of packed bed and associated packed bed reactor, respectively, and a deactivation coefficient 0.0061 H-1 .

Targeting riboswitches with synthetic small RNAs for metabolic engineering.

Our growing knowledge of the diversity of non-coding RNAs in natural systems and our deepening knowledge of RNA folding and function have fomented the rational design of RNA regulators. Based on that knowledge, we designed and implemented a small RNA tool to target bacterial riboswitches and activate gene expression (rtRNA). The synthetic rtRNA is suitable for regulation of gene expression both in cell-free and in cellular systems. It targets riboswitches to promote the antitermination folding regardless the cognate metabolite concentration. Therefore, it prevents transcription termination increasing gene expression up to 103-fold. We successfully used small RNA arrays for multiplex targeting of riboswitches. Finally, we used the synthetic rtRNAs to engineer an improved riboflavin producer strain. The easiness to design and construct, and the fact that the rtRNA works as a single genome copy, make it an attractive tool for engineering industrial metabolite-producing strains.

Comparison of Two Methods for Counting Molds in Fermentations Using the Production of Bikaverin by Fusarium oxysporum CCT7620 as a Model.

The dry cell weight (DCW) measurement is one of the preferred methods to determine the growth of filamentous fungi. However, this technique is not applicable to insoluble culture media, besides being possibly influenced by the presence of extracellular biomass. The standard plate counting (SPC) is a reference method for detecting viable cells; however, it is referred as imprecise. In this study, we did a comprehensive analysis of the errors associated to each procedure and also determined the growth kinetics of Fusarium oxysporum in soluble (DCW and SPC) and insoluble (SPC) culture media. Finally, we used the production of bikaverin in airlift bioreactor containing insoluble medium as a case study to estimate red pigment production and to monitor biomass growth via SPC. We concluded that SPC can be used to give reliable fungal growth kinetics in media with insoluble matter, yielding errors equivalent to DCW depending on the number of replicates done for serial dilutions and plate counting.

Screening of medium constituents for clavulanic acid production by Streptomyces clavuligerus.

Clavulanic acid is a ß-lactam compound with potent inhibitory activity against ß-lactamases. Studies have shown that certain amino acids play essential roles in CA biosynthesis. However, quantitative evaluations of the effects of these amino acids are still needed in order to improve CA production. Here, we report a study of the nutritional requirements of Streptomyces clavuligerus for CA production. Firstly, the influence of the primary nitrogen source and the salts composition was investigated. Subsequently, soybean protein isolate was supplemented with arginine (0.0-3.20gL-1), threonine (0.0-1.44gL-1), ornithine (0.0-4.08gL-1), and glutamate (0.0-8.16gL-1), according to a two-level central composite rotatable design. A medium containing ferrous sulfate yielded CA production of 437mgL-1, while a formulation without this salt produced only 41mgL-1 of CA. This substantial difference suggested that Fe2+ is important for CA biosynthesis. The experimental design showed that glutamate and ornithine negatively influenced CA production while arginine and threonine had no influence. The soybean protein isolate provided sufficient C5 precursor for CA biosynthesis, so that supplementation was unnecessary. Screening of medium components, together with experimental design tools, could be a valuable way of enhancing CA titers and reducing the process costs.

Enhanced immunization techniques to obtain highly specific monoclonal antibodies.

Despite fast advances in genomics and proteomics, monoclonal antibodies (mAbs) are still a valuable tool for areas such as the evolution of basic research in stem cells and cancer, for immunophenotyping cell populations, diagnosing and prognosis of diseases, and for immunotherapy. To summarize different subtractive immunization approaches successfully used for the production of highly specific antibodies, we identified scientific articles in NCBI PubMed using the following search terms: subtractive immunization, monoclonal antibody, tolerization, neonatal, high-zone tolerance, masking immunization. Patent records were also consulted. From the list of results, we included all available reports, from 1985 to present, that used any enhanced immunization technique to produce either polyclonal or monoclonal antibodies. Our examination yielded direct evidence that these enhanced immunization techniques are efficient in obtaining specific antibodies to rare epitopes, with different applications, such as to identify food contaminants or tumor cells.

Adsorption of immunoglobulin Y in supermacroporous continuous cryogel with immobilized Cu(2+) ions.

The influence of temperature, pH and ionic strength on the adsorption of Immunoglobulin Y (IgY) in IDA-Cu(2+) cryogel system was studied by batch equilibrium measurements. The adsorptive equilibrium data were obtained at 17 and 27°C, pH 5.0 and 6.5, and at ionic strength of 50 and 200mmolL(-1) NaCl. Langmuir, Freundlich and Langmuir-Freundlich models were fitted to equilibrium data, while the enthalpy of adsorption of IgY in IDA-Cu(2+) cryogel system was calculated through Van't Hoff analysis. The binding of IgY on cryogel was stronger at 27°C and lowest pH and ionic strength values, with apparent maximum adsorption capacity of 27mgg(-1). The adsorption of protein in the resin was spontaneous in all analyzed cases. The results provide valuable information to enable the improvement of IgY purification processes.

Screening of medium constituents for clavulanic acid production by Streptomyces clavuligerus

ABSTRACT Clavulanic acid is a β-lactam compound with potent inhibitory activity against β-lactamases. Studies have shown that certain amino acids play essential roles in CA biosynthesis. However, quantitative evaluations of the effects of these amino acids are still needed in order to improve CA production. Here, we report a study of the nutritional requirements of Streptomyces clavuligerus for CA production. Firstly, the influence of the primary nitrogen source and the salts composition was investigated. Subsequently, soybean protein isolate was supplemented with arginine (0.0-3.20 g L-1), threonine (0.0-1.44 g L-1), ornithine (0.0-4.08 g L-1), and glutamate (0.0-8.16 g L-1), according to a two-level central composite rotatable design. A medium containing ferrous sulfate yielded CA production of 437 mg L-1, while a formulation without this salt produced only 41 mg L-1 of CA. This substantial difference suggested that Fe2+ is important for CA biosynthesis. The experimental design showed that glutamate and ornithine negatively influenced CA production while arginine and threonine had no influence. The soybean protein isolate provided sufficient C5 precursor for CA biosynthesis, so that supplementation was unnecessary. Screening of medium components, together with experimental design tools, could be a valuable way of enhancing CA titers and reducing the process costs.